Allows edk2 detect virtio-mmio devices and pcie ecam.
See comment in hw/i386/microvm-dt.c for more details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
The EDK2 firmware images built to test QEMU do not require
the following submodules:
- MdeModulePkg/Universal/RegularExpressionDxe/oniguruma
- UnitTestFrameworkPkg/Library/CmockaLib/cmocka
The only submodules required are:
- ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3
- BaseTools/Source/C/BrotliCompress/brotli
- CryptoPkg/Library/OpensslLib/openssl
- MdeModulePkg/Library/BrotliCustomDecompressLib/brotli
Adapt the buildsys machinery to only initialize the required
submodules.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211018105816.2663195-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo meant the substitution would not work, and the placeholder in the
target file didn't even exist.
The result was that tests were never run on the FreeBSD and macOS jobs,
only a basic build.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210915125452.1704899-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-10-alex.bennee@linaro.org>
The check-patch job is intended to be used by contributors or
subsystem maintainers to see if there are style mistakes. The
false positive rate is too high to be used in a gating scenario
so should not run it on the upstream repo ever.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210915125452.1704899-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-9-alex.bennee@linaro.org>
To be able to cross build QEMU itself we need to include a few more
libraries. These are only available in Debian's unstable ports repo
for now so we need to base the riscv64 image on sid with the the
minimal libs needed to build QEMU (glib/pixman).
The result works but is not as clean as using build-dep to bring in
more dependencies. However sid is by definition a shifting pile of
sand and by keeping the list of libs minimal we reduce the chance of
having an image we can't build. It's good enough for a basic cross
build testing of TCG.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210914185830.1378771-2-richard.henderson@linaro.org>
[AJB: tweak allow_failure]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-5-alex.bennee@linaro.org>
If a gitlab CI job is marked as manual-only but is not marked
as allow_failure, then gitlab considers that the pipeline is
"blocked" until the job has been manually triggered. We need
to mark these manual-only jobs as also allow_failure: true
so that gitlab doesn't insist that they have run before it
will consider the pipeline to be complete.
Fixes: 4c9af1ea14
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210915123412.8232-1-peter.maydell@linaro.org
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Currently we define a lot of jobs for our custom runners:
for both aarch64 and s390x we have
- all-linux-static
- all
- alldbg
- clang (manual)
- tci
- notcg (manual)
This is overkill. The main reason to run on these hosts is to get
coverage for the host architecture; we can leave the handling of
differences like debug vs non-debug to the x86 CI jobs.
The jobs are also generally running OK; they occasionally fail due to
timeouts, which is likely because we're overloading the machine by
asking it to run 4 CI jobs at once plus the ad-hoc CI.
Remove the 'allow_failure' tag from all these jobs, and switch the
s390x-alldbg, aarch64-all, s390x-tci and aarch64-tci jobs to manual.
(We keep -all on s390x and -alldbg on aarch64 just for diversity
of coverage.)
This will let us make the switch for s390x and aarch64 hosts from
the ad-hoc CI to gitlab.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210913101948.12600-1-peter.maydell@linaro.org
libfdt in Debian is too old to be usable for QEMU. So far we were
silently falling back to the internal dtc submodule, but since
this is wrong, let's remove the --enable-fdt=system switch here now.
Message-Id: <20210827151718.178988-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch that recently introduced the S390X_RUNNER_AVAILABLE variable
in custom-runners.yml missed that the bottom half of the file is rather
about aarch64 than s390x. Thus rename the S390X_RUNNER_AVAILABLE to
AARCH64_RUNNER_AVAILABLE in those jobs.
Finally mention both variables in our CI documentation, too.
Fixes: c5dd0f0342 ("Improve rules for the staging branch")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210730143809.717079-4-thuth@redhat.com>
[AJB: moved due to docu changes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-5-alex.bennee@linaro.org>
The container already features meson and ninja, so there is no need
to try to install it with dnf again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210730143809.717079-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-4-alex.bennee@linaro.org>
Both jobs are testing more or less the same thing (building QEMU with
features disabled), so we are wasting precious CI cycles here by doing
this twice. Merge the jobs by using --without-default-features by default
and just adding some additional --disable-... switches which are not
covered by the generic switch (yet). And while we're at it, also test
compilation with "--disable-fdt" (which forces us to change the list
of targets in this job, though, since some targets do not work without
fdt).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210730143809.717079-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-3-alex.bennee@linaro.org>
Give a good name to test file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-29-vsementsov@virtuozzo.com>
[hreitz: Adjust .gitlab-ci.d/buildtest.yml]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The windows cross builds still take way too long in gitlab CI, so need
more targets to be skipped. We don't want to hurt coverage of other
cross builds more though, so we let jobs fine tune with a new env
variale $CROSS_SKIP_TARGETS.
We take the set of targets that are considered relatively niche or
very old architectures, and skip approx half of them in win32 builds
and the other half of them in win64.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-3-berrange@redhat.com>
[thuth: Swapped the "CROSS_SKIP_TARGETS:" lines as suggested by philmd]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need to cut down compile time by excluding more targets. Both these
targets still have their 64-bit variant enabled, so the loss of coverage
is mitigated to some degree.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If maintainers are currently pushing to a branch called "staging"
in their repository, they are ending up with some stuck jobs - unless
they have a s390x CI runner machine available. That's ugly, we should
make sure that the related jobs are really only started if such a
runner is available. So let's only run these jobs if it's the
"staging" branch of the main repository of the QEMU project (where
we can be sure that the s390x runner is available), or if the user
explicitly set a S390X_RUNNER_AVAILABLE variable in their CI configs
to declare that they have such a runner available, too.
Fixes: 4799c21023 ("Jobs based on custom runners: add job definitions ...")
Message-Id: <20210728173857.497523-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These two jobs are currently failing very often - the linker seems to
get killed due to out-of-memory problems. Since apparently nobody has
currently an idea how to fix that nicely, let's mark the jobs as manual
for the time being until someone comes up with a proper fix.
Message-Id: <20210728075141.400816-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The iotests 197 and 215 are occasionally failing in the gitlab-CI now.
According to the log, the failure is "./common.rc: Killed" which might
be an indication that the process has been killed due to out-of-memory
reasons. Both tests are doing a big read with 2G that likely causes
this issue. It used to work fine in the gitlab-CI in the past, but
either the program is now requiring more free memory, or the the CI
containers have changed, so that the OOM condition now sometimes occurs.
Anyway, these two tests are not really suitable for CI containers if
they are doing things like huge reads (which is likely also the reason
why they haven't been added to the "auto" group in the past), so let's
simply disable them in the gitlab-CI now, too.
Message-Id: <20210727162542.318882-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: c6fc0fc1a7 ("gitlab-ci.yml: Add jobs to build OpenSBI firmware binaries")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210727142431.1672530-5-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: 71920809ce ("gitlab-ci.yml: Add jobs to build EDK2 firmware binaries")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210727142431.1672530-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: f56bf4caf7 ("gitlab: Run Avocado tests manually (except mainstream CI)")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210727142431.1672530-3-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmD67ioACgkQ+9DbCVqe
KkTKcwf/UlEl2wlYrvymoJy7caasD/UrlNwpaK90zRTxuofJjG2bXX/58EGBlgxe
cjbX3841702HXAFDxzswmWX3yeXQVgNiXrEy5FapB7L3h/qC/BDVS4pz987TITNW
b4lw/d05bQVGavcdJXPnX0CdV8IK4hpieDkdh/LGj5+CSAC39jvyVGTYBpfLKl8D
cps5qcJcJuQjz4hatB1haZOV1WHLyw8KI0srfcEqkh3IImZFZ09frs3qqAxrYRqE
Y62d7SIN5TX1XgWuTaf1mmaMVmbNi9DTdCxWpGYr4ZBLhhzKeljQvKbF45ZGQ0z9
eBVBdxGJTX/WAKrimcbHxLo43pCo2Q==
=7vzj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.1-rc1-230721-1' into staging
Doc, metadata, plugin and testing updates for 6.1-rc1:
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
# gpg: Signature made Fri 23 Jul 2021 17:28:26 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.1-rc1-230721-1: (28 commits)
gitlab-ci: Extract OpenSBI job rules to reusable section
gitlab-ci: Remove the second superfluous macos task
gitlab: enable a very minimal build with the tricore container
tests/tcg/configure.sh: add handling for assembler only builds
plugins: Fix physical address calculation for IO regions
plugins/cache: Fixed "function decl. is not a prototype" warnings
plugins/cache: limited the scope of a mutex lock
plugins/cache: Fixed a bug with destroying FIFO metadata
tcg/plugins: implement a qemu_plugin_user_exit helper
contrib/gitdm: add more individual contributor entries.
contrib/gitdm: add a new interns group-map for GSoC/Outreachy work
contrib/gitdm: add an explicit academic entry for BU
contrib/gitdm: add group-map for Netflix
contrib/gitdm: add domain-map for NVIDIA
contrib/gitdm: add domain-map for Crudebyte
contrib/gitdm: un-ironically add a mapping for LWN
contrib/gitdm: add domain-map/group-map for Wind River
contrib/gitdm: add domain-map for Eldorado
contrib/gitdm: add domain-map/group-map mappings for Samsung
gitdm.config: sort the corporate GroupMap entries
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All jobs depending on 'docker-opensbi' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-opensbi' and 'build-opensbi' jobs.
The problem was introduced in commit c6fc0fc1a7 ("gitlab-ci.yml:
Add jobs to build OpenSBI firmware binaries"), but was revealed in
commit 91e9c47e50 ("docker: OpenSBI build job depends on OpenSBI
container").
This fix is similar to the one used with the EDK2 firmware job in
commit ac0595cf6b ("gitlab-ci: Extract EDK2 job rules to reusable
section").
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720164829.3949558-1-philmd@redhat.com>
Message-Id: <20210720232703.10650-30-alex.bennee@linaro.org>
While there might have been bigger differnces between the -base and
the -xcode images in the beginning, they almost vanished in the
current builds, e.g. when comparing the output of the "configure"
step after cleaning up the differences due to temporary path names,
I only get:
$ diff -u /tmp/base.txt /tmp/xcode.txt
--- /tmp/base.txt 2021-07-16 09:16:24.211427940 +0200
+++ /tmp/xcode.txt 2021-07-16 09:16:43.029684274 +0200
@@ -19,14 +19,14 @@
Build type: native build
Project name: qemu
Project version: 6.0.50
-C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C linker for the host machine: cc ld64 609.8
Host machine cpu family: x86_64
Host machine cpu: x86_64
Program sh found: YES (/bin/sh)
Program python3 found: YES (/usr/local/opt/python@3.9/bin/python3.9)
Program bzip2 found: YES (/usr/bin/bzip2)
-C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C++ linker for the host machine: c++ ld64 609.8
Objective-C compiler for the host machine: clang (clang 12.0.0)
Objective-C linker for the host machine: clang ld64 609.8
Since we're not using Xcode itself at all, it seems like it does not
make much sense anymore to waste compute cycles with two images here.
Thus let's delete the -xcode job now.
[AJB: fix up commit formatting which trips up b4]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210719073051.1559348-1-thuth@redhat.com>
Message-Id: <20210720232703.10650-29-alex.bennee@linaro.org>
Rather than base of the shared Debian 10 container which would require
us to bring in even more dependencies just bring in what is needed for
building tricore-softmmu in GitLab. We don't even remove the container
from the DOCKER_PARTIAL_IMAGES lest we cause more confusion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720232703.10650-28-alex.bennee@linaro.org>
GitLab will happily publish pages generated by the latest CI pipeline
from any branch:
https://docs.gitlab.com/ee/user/project/pages/introduction.html
"Remember that GitLab Pages are by default branch/tag agnostic
and their deployment relies solely on what you specify in
.gitlab-ci.yml. You can limit the pages job with the only
parameter, whenever a new commit is pushed to a branch used
specifically for your pages."
The current "pages" job is not limited, so it is happily publishing
docs content from any branch/tag in qemu.git that gets pushed to.
This means we're potentially publishing from the "staging" branch
or worse from outdated "stable-NNN" branches
This change restricts it to only publish from the default branch
in the main repository. For contributor forks, however, we allow
it to publish from any branch, since users will have arbitrarily
named topic branches in flight at any time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210723113051.2792799-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build windows installer for qemu in gitlab CI,
store the result as artifact.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210623091137.1156959-2-kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmDu+xsACgkQ+9DbCVqe
KkQ2XAf+MRBeSMX9J091iloiqSjpuobAcVuoIFciG7gEqWd2iTQVPDqJNgBJUANQ
vTA7f89ljxj/FZjSZwLgR6cqY6X0ufXI1BLEIt7s78LJtVp14sHVo89GwNBzmRwo
615T49KG8b5EBBU5YlVcAW/m8DlfgI4b1ufS/qHldOukKegu+haoCDjGG6RNpYNx
mmXgLOBJiB/p2u2S73KTIa+3AEIIlsTJZpdLPus8hby+/Q4qB9t8YbdHaweyM9qs
NjiojczvlbHLFd/IQSl6fqBS9QI+KWf4+oFd6ZB4THhr9/GUYTiMeLjRKucBgDQG
TwGtd1RN3gAPI5aEJ0xlgCL/crz1qg==
=dQl6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugins-140721-5' into staging
Testing and plugin updates:
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
# gpg: Signature made Wed 14 Jul 2021 15:56:27 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugins-140721-5: (44 commits)
MAINTAINERS: Added myself as a reviewer for TCG Plugins
docs/devel: Added cache plugin to the plugins docs
plugins/cache: Added FIFO and LRU eviction policies
plugins/cache: Enable cache parameterization
plugins: Added a new cache modelling plugin
docs/devel: tcg-plugins: add execlog plugin description
contrib/plugins: add execlog to log instruction execution and memory access
contrib/plugins: enable -Wall for building plugins
tcg/plugins: enable by default for most TCG builds
configure: stop user enabling plugins on Windows for now
configure: add an explicit static and plugins check
configure: don't allow plugins to be enabled for a non-TCG build
tcg/plugins: remove some stale entries from the symbol list
meson.build: relax the libdl test to one for the function dlopen
meson.build: move TCG plugin summary output
plugins: fix-up handling of internal hostaddr for 32 bit
tests/tcg: make test-mmap a little less aggressive
tests/vm: update openbsd to release 6.9
tests/vm: update NetBSD to 9.2
tests/docker: expand opensuse-leap package list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All jobs depending on 'docker-edk2' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-edk2' and 'build-edk2' jobs.
The problem was introduced in commit 71920809ce ("gitlab-ci.yml:
Add jobs to build EDK2 firmware binaries"), but was revealed in
commit 1925468ddb ("docker: EDK2 build job depends on EDK2
container") and eventually failed on CI:
https://gitlab.com/qemu-project/qemu/-/pipelines/335995843
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210714101003.3113726-1-philmd@redhat.com>
Aside from a minor bloat to file size the ability to have TCG plugins
has no real impact on performance unless a plugin is actively loaded.
Even then the libempty.so plugin shows only a minor degradation in
performance caused by the extra book keeping the TCG has to do to keep
track of instructions. As it's a useful feature lets just enable it by
default and reduce our testing matrix a little.
We need to move our linker testing earlier so we can be sure we can
enable the loader module required. As we have ruled out static &
plugins in an earlier patch we can also reduce the indent a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210709143005.1554-33-alex.bennee@linaro.org>
This adds support for running 4 jobs via Cirrus CI runners:
* FreeBSD 12
* FreeBSD 13
* macOS 11 with default XCode
* macOS 11 with latest XCode
The gitlab job uses a container published by the libvirt-ci
project (https://gitlab.com/libvirt/libvirt-ci) that contains
the 'cirrus-run' command. This accepts a short yaml file that
describes a single Cirrus CI job, runs it using the Cirrus CI
REST API, and reports any output to the console.
In this way Cirrus CI is effectively working as an indirect
custom runner for GitLab CI pipelines. The key benefit is that
Cirrus CI job results affect the GitLab CI pipeline result and
so the user only has look at one CI dashboard.
[AJB: remove $TEMPORARILY_DISABLED condition, s/py37/py38/]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210625172211.451010-3-berrange@redhat.com>
Message-Id: <20210709143005.1554-8-alex.bennee@linaro.org>
The QEMU project has two machines (aarch64 and s390x) that can be used
for jobs that do build and run tests. This introduces those jobs,
which are a mapping of custom scripts used for the same purpose.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630012619.115262-5-crosa@redhat.com>
Message-Id: <20210709143005.1554-5-alex.bennee@linaro.org>
As described in the included documentation, the "custom runner" jobs
extend the GitLab CI jobs already in place. One of their primary
goals of catching and preventing regressions on a wider number of host
systems than the ones provided by GitLab's shared runners.
This sets the stage in which other community members can add their own
machine configuration documentation/scripts, and accompanying job
definitions. As a general rule, those newly added contributed jobs
should run as "non-gating", until their reliability is verified (AKA
"allow_failure: true").
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630012619.115262-2-crosa@redhat.com>
Message-Id: <20210709143005.1554-2-alex.bennee@linaro.org>
Currently tox tests against the installed interpreters, however if any
supported interpreter is absent then it will return fail. It seems not
reasonable to expect developers to have all supported interpreters
installed on their systems. Luckily tox can be configured to skip
missing interpreters.
This changed the tox setup so that missing interpreters are skipped by
default. On the CI, however, we still want to enforce it tests
against all supported. This way on CI the
--skip-missing-interpreters=false option is passed to tox.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630184546.456582-1-wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Well, Cleber was right, this is a better name.
In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.
Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.
Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Rather than relying on external tweaks lets just do it inside
checkpatch's direct commitish handling which is QEMU specific code
anyway.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210623102749.25686-4-alex.bennee@linaro.org>
This job is hitting the 70min limit, so split it in 2 tasks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-7-f4bug@amsat.org>
This copies the behaviour of patchew's configuration to make the diff
algorithm generate a minimal diff.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210602153247.27651-1-alex.bennee@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gnutls version
Per repology, current shipping versions are:
RHEL-8: 3.6.14
Debian Buster: 3.6.7
openSUSE Leap 15.2: 3.6.7
Ubuntu LTS 18.04: 3.5.18
Ubuntu LTS 20.04: 3.6.13
FreeBSD: 3.6.15
Fedora 33: 3.6.16
Fedora 34: 3.7.1
OpenBSD: 3.6.15
macOS HomeBrew: 3.6.15
Ubuntu LTS 18.04 has the oldest version and so 3.5.18 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-7-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gcrypt version and
assume that HMAC is always supported
Per repology, current shipping versions are:
RHEL-8: 1.8.5
Debian Buster: 1.8.4
openSUSE Leap 15.2: 1.8.2
Ubuntu LTS 18.04: 1.8.1
Ubuntu LTS 20.04: 1.8.5
FreeBSD: 1.9.2
Fedora 33: 1.8.6
Fedora 34: 1.9.3
OpenBSD: 1.9.3
macOS HomeBrew: 1.9.3
Ubuntu LTS 18.04 has the oldest version and so 1.8.0 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-6-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required nettle version and
drop a lot of backwards compatibility code for 2.x series of nettle.
Per repology, current shipping versions are:
RHEL-8: 3.4.1
Debian Buster: 3.4.1
openSUSE Leap 15.2: 3.4.1
Ubuntu LTS 18.04: 3.4
Ubuntu LTS 20.04: 3.5.1
FreeBSD: 3.7.2
Fedora 33: 3.5.1
Fedora 34: 3.7.2
OpenBSD: 3.7.2
macOS HomeBrew: 3.7.2
Ubuntu LTS 18.04 has the oldest version and so 3.4 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-4-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a Python container that has just enough juice for us to run the
Python code quality analysis tools. Base this container on Fedora,
because Fedora has very convenient packaging for testing multiple Python
versions.
We need python3, pip (for pulling packages), pipenv and virtualenv for
creating virtual environments, and tox for running tests. make is needed
for running 'make check-tox' and 'make venv-check' targets. Python3.10
is needed explicitly because the tox package only pulls in 3.6-3.9, but
we wish to test the forthcoming release of Python as well to help
predict any problems. Lastly, we need gcc to compile PyPI packages that
may not have a binary distribution available.
Add two tests:
check-python-pipenv uses pipenv to test a frozen, very explicit set of
packages against our minimum supported python version, Python 3.6. This
test is not allowed to fail. The dependencies this test uses do not
change unless python/Pipfile.lock is changed.
check-python-tox uses tox to install the latest versions of required
python dependencies against a wide array of Python versions from 3.6 to
3.9, even including the yet-to-be-released Python 3.10. This test is
allowed to fail with a warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-32-jsnow@redhat.com
[Fix rebase conflict over .gitlab-ci.yml --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Per GitLab documentation [*]:
"rules replaces only/except and they can’t be used together
in the same job."
Since the 'rules' syntax is more powerful and we are already using
it, convert the check-dco/check-patch jobs so no job use the 'only/
except' syntax.
[*] https://docs.gitlab.com/ee/ci/yaml/#rules
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525132418.4133235-3-f4bug@amsat.org>
We want to skip the checkpatch and DCO signoff jobs when
pushing to the default branch. Currently this branch is
called 'master', but we don't need to hardcode this in
the CI configuration, because the $CI_DEFAULT_BRANCH
env variable exposes it.
References:
- https://sfconservancy.org/news/2020/jun/23/gitbranchname/
- https://about.gitlab.com/blog/2021/03/10/new-git-default-branch-name/
Suggested-by: Savitoj Singh <savsingh@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210525153826.4174157-1-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Due to a design problem and misunderstanding between the Avocado
framework and QEMU, Avocado is fetching many asset artifacts it
shouldn't be fetching, exhausting the jobs CI timeout.
Since Avocado artifacts are cached, this is not an issue with old
forks, which already have populated the cache and do not need to
download new artifacts to run the tests.
However this is very confusing to new contributors who start to
fork the project and keep having failing CI pipelines.
As a temporary kludge, add the QEMU_CI_AVOCADO_TESTING variable
to allow old forks to keep running the Avocado tests, while still
allowing new forks to use the mainstream set of CI tests.
Keep the tests enabled by default on the mainstream namespace
which is old enough to have a populated cache, hoping we will
keep this cache long enough until the Avocado/QEMU design issue
is fixed.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210525082556.4011380-9-f4bug@amsat.org>
Sometimes pull requests are merged during the week-end, triggering
a CI pipeline. Currently if such pipeline fails, the Avocado reports
are available for 2 days. For the reviewers working on the project
during office hours, the reports are already discarded when they
want to look at them. Increase this time to 1 week, which should
give reviewers enough time.
Only keep the reports on failure, which is the only case we'll
look at them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-8-f4bug@amsat.org>
Extract the jobs preparing the cross containers into a new file
(container-cross.yml).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-5-f4bug@amsat.org>
To allow forks to easily decide which jobs they want to run,
but without disrupting the current default, move the current
set of jobs to a new file corresponding to the jobs run by
the mainstream project CI:
https://gitlab.com/qemu-project/qemu/-/pipelines
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210511072952.2813358-11-f4bug@amsat.org>
Extract the build/test jobs run by default on the mainstream
CI into a new file (buildtest.yml).
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210511072952.2813358-9-f4bug@amsat.org>
It is not possible to use the previously extracted templates
without this set of core containers. Extract them into a new
file (container-core.yml) to be able to build them without
having to build all the other containers by default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to reuse the mainstream build/test jobs templates,
extract them into a new file (buildtest-template.yml).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-8-f4bug@amsat.org>
[thuth: Keep the "acceptance_test_job_template" name for now]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extract the build stages used by our job templates to a new file
(stages.yml) to be able to include it with the other templates,
without having to run all the jobs included in the default
.gitlab-ci.yml, which are mainly useful for mainstream CI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-7-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extract the DCO / checkpatch jobs to a new file (static_checks.yml)
to be able to run them without having to run all the jobs included
in the default .gitlab-ci.yml, which are mainly useful for the
mainstream CI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-6-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extract the crossbuild job templates to a new file
(crossbuild-template.yml) to be able to reuse them
without having to run all the jobs included, which
are mainly useful for mainstream CI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-5-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extract the container job template to a new file
(container-template.yml) to be able to reuse it
without having to run all the jobs included, which
are mainly useful for mainstream CI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-4-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We're currently only testing TCI with a 64-bit host -- also test
with a 32-bit host. Enable a selection of softmmu and user-only
targets, 32-bit LE, 64-bit LE, 32-bit BE, as there are ifdefs for each.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210502235727.1979457-27-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The hexagon container is always manually built but of course not
everyone will be building it themselves and pushing to their
registries. We still need to create a "local" registry copy for the
actual gitlab tests to run. We don't build it in this case, just pull
it across from the upstream registry. We disable this rule from
running on the qemu-project itself so it doesn't accidentally wipe out
our master copy.
Fixes: 910c40ee94 ("gitlab: add build-user-hexagon test")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210520174303.12310-4-alex.bennee@linaro.org>
Since c8e6793903 ("containers.yml: build with docker.py tooling") we
don't need to manually pull stuff from the upstream repository. Just
set the -r field to explicitly use that rather than the current
registry.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210520174303.12310-3-alex.bennee@linaro.org>
A newer compiler is needed to build tests for Power10 instructions. As
done for arm64 on c729a99d27, a new '-test-cross' image is created for
ppc64 and ppc64le. As done on 936fda4d77, a test for compiler support
is added to verify that the toolchain in use has '-mpower10'. Finally,
Unused images (docker-power-cross and docker-ppc64-cross) are removed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-2-matheus.ferst@eldorado.org.br>
Message-Id: <20210512102051.12134-27-alex.bennee@linaro.org>
'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210418233448.1267991-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a new job to cross-build the mips64el target without
the TCG accelerator (IOW: only KVM accelerator enabled).
Only build the mips64el target which is known to work
and has users.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-31-f4bug@amsat.org>
In d0f26e68a0 ("gitlab: force enable docs build in Fedora, Ubuntu,
Debian") we made sure we can build the documents on more than one
system. However we don't want to build documents all the time as it's
a waste of cycles (and energy). So lets reduce the total amount of
documentation we build while still keeping coverage of at least one
build on each supported target.
Fixes: a8a3abe0b3 ("gitlab: move docs and tools build across from Travis")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-23-alex.bennee@linaro.org>
This allows the build jobs to start running as soon as their respective
container image is ready, instead of waiting for all container builds
to finish.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216132954.295906-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently we attempt to skip building container images if the commits do
not involve changes to the dockerfiles or gitlab CI definitions.
Conceptually this makes sense, but there is a challenge in the real
world implementation of this in gitlab.
In the case of a CI pipeline triggered from a merge request, GitLab
knows the common ancestor of the merge request and the main git repo,
so it can trivially determine if any of the commits associated with
the MR change the dockerfiles.
In the case of a CI pipeline triggered from a push to a branch, it is
much more difficult. There is no concept of a common ancestor in this
case. Instead GitLab looks at the set of commits in the git push event.
On the surface this may sound reasonable, but it doesn't take into
account that a push event does not always contain the full set of
patches from a branch.
For example, consider pushing 5 commits, one of which contains a
dockerfile change. This will trigger a CI pipeline for the
containers. Now consider you do some more work on the branch and push 3
further commits, so you now have a branch of 8 commits. For the second
push GitLab will only look at the 3 most recent commits, the other 5
were already present. Thus GitLab will not realize that the branch has
dockerfile changes that need to trigger the container build.
This can cause real world problems:
- Push 5 commits to branch "foo", including a dockerfile change
=> rebuilds the container images with content from "foo"
=> build jobs runs against containers from "foo"
- Refresh your master branch with latest upstream master
=> rebuilds the container images with content from "master"
=> build jobs runs against containers from "master"
- Push 3 more commits to branch "foo", with no dockerfile change
=> no container rebuild triggers
=> build jobs runs against containers from "master"
The "changes" conditional in gitlab is OK, *provided* your build
jobs are not relying on any external state from previous builds.
This is NOT the case in QEMU, because we are building container
images and these are cached. This is a scenario in which the
"changes" conditional is not usuable.
The only other way to avoid this problem would be to use the git
branch name as the container image tag, instead of always using
"latest". The downside of this approach is that the user's gitlab
registry will grow significantly until it starts to trigger
GitLab's automatic deletion policy. Every time the user starts
a new branch they will have to trigger a rebuild of the container
images. Given this, we might as well just drop the conditional
and always build the container images. Most of the time docker
will be able to use the layer cache to avoid the most expensive
part of the rebuild process (installing all the RPMs/debs/etc)
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216132954.295906-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add build-system-opensuse jobs and opensuse-leap.docker dockerfile.
Use openSUSE Leap 15.2 container image in the gitlab-CI.
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201229085046.8536-1-acho@suse.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After adding some missing packages, it's possible to check 32-bit
builds and tests with the fedora-i386-cross container in the gitlab-CI,
too. Unfortunately, the code in subprojects/ ignores the --extra-cflags
(on purpose), so the vhost-user part has to be disabled for this.
While we're at it, update the container to Fedora 31. Unfortunately the
gcc from the later versions emits some very dubious format-truncation
warnings, so Fedora 32 and 33 are currently unsuitable for this job.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201215083451.92322-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Otherwise we miss coverage of KVM support in the cross build. To
balance it out add arm-softmmu (no kvm, subset of aarch64),
cris-softmmu and ppc-softmmu to the exclude list which do get coverage
elsewhere.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201210190417.31673-3-alex.bennee@linaro.org>
Cross-build ARM and X86 targets with only Xen accelerator enabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-6-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cross-build s390x target with only KVM accelerator enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-5-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a job template to cross-build accelerator specific
jobs (enable a specific accelerator, disabling the others).
The specific accelerator is selected by the $ACCEL environment
variable (default to KVM).
Extra options such disabling other accelerators are passed
via the $ACCEL_CONFIGURE_OPTS environment variable.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends
More importantly it allows exploding YAML jobs.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-3-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update containers.yml to use the $CI_REGISTRY variable as other files
such as edk2.yml do.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201113172519.31056-1-rebecca@nuviainc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need running commentary for the CI logs and by keeping it
short we might just see the problem on the first page. While we are at
it flush the previous line so order is maintained between script and
sub process.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201113174404.19608-1-alex.bennee@linaro.org>
If the current branch is synced to the current upstream git master,
there are no commits that need checking. This causes checkpatch.pl
to print an error that it found no commits. We need to avoid calling
checkpatch.pl in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201019143537.283094-2-berrange@redhat.com>
Message-Id: <20201021163136.27324-5-alex.bennee@linaro.org>
While checkpatch.pl can validate DCO sign off that job must always be
advisory only since it is expected that certain patches will fail some
code style rules.
We require the DCO sign off to be mandatory for all commits though, so
it benefits from being validated in a standalone job.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200918132903.1848939-3-berrange@redhat.com>
[thuth: Use "stage: build" to let it run earlier]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This job is advisory since it is expected that certain patches will fail
the style checks and checkpatch.pl provides no way to mark exceptions to
the rules.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200918132903.1848939-2-berrange@redhat.com>
[thuth: Use "stage: build" to let it run earlier]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some of the cross-compiler builds (the mips build and the win64 build
for example) are quite slow and sometimes hit the 1h time limit.
Increase the limit a little bit to make sure that we do not get failures
in the CI runs just because of some few minutes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200921174320.46062-7-thuth@redhat.com>
Message-Id: <20200925154027.12672-15-alex.bennee@linaro.org>
We do not support Debian 9 in QEMU anymore, and the Debian 9 containers
are now no longer used in the gitlab-CI. Time to remove them.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200921174320.46062-6-thuth@redhat.com>
Message-Id: <20200925154027.12672-14-alex.bennee@linaro.org>
We do not support Debian 9 anymore, thus update the Tricore container
to Debian 10 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200921174320.46062-4-thuth@redhat.com>
Message-Id: <20200925154027.12672-12-alex.bennee@linaro.org>
According to our support policy, Debian 9 is not supported by the
QEMU project anymore. Since we now switched the MinGW cross-compiler
builds to Fedora, we do not need these Debian9-based containers
in the gitlab-CI anymore, and can now also get rid of the "layer3"
container build stage this way.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200921174320.46062-3-thuth@redhat.com>
Message-Id: <20200925154027.12672-11-alex.bennee@linaro.org>
According to our support policy, we do not support Debian 9 in QEMU
anymore, and we only support building the Windows binaries with a
very recent version of the MinGW toolchain. So we should not test
the MinGW cross-compilation with Debian 9 anymore, but switch to
something newer like Fedora. To do this, we need a separate Fedora
container for each build that provides the QEMU_CONFIGURE_OPTS
environment variable.
Unfortunately, the MinGW 64-bit compiler seems to be a little bit
slow, so we also have to disable some features like "capstone" in the
build here to make sure that the CI pipelines still finish within a
reasonable amount of time.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200921174320.46062-2-thuth@redhat.com>
Message-Id: <20200925154027.12672-10-alex.bennee@linaro.org>
Now that we can use all our QEMU test containers in the gitlab-CI, we can
easily add some jobs that test cross-compilation for various architectures.
There is just only small ugliness: Since the shared runners on gitlab.com
are single-threaded, we have to split each compilation job into two parts
(--disable-user and --disable-system), and exclude some additional targets,
to avoid that the jobs are running too long and hitting the timeout of 1 h.
Message-Id: <20200823111757.72002-8-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This updates the GitLab CI opensbi job to build opensbi bios images
for the generic platform.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The tests/docker/* wildcard seems to only match the files that are directly
in the tests/docker folder - but changes to the files in the directory
tests/docker/dockerfiles are currently ignored. Seems like we need a
separate entry to match the files in that folder. With this wildcard added,
the stages now get re-run successfully when something in the dockerfiles
has been changed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200713182235.30379-1-thuth@redhat.com>
Instead of building the docker files directly use the same docker.py
scripting as we do for building locally. This should help ensure we
use the exact same steps and allow us to cache properly when building
locally.
To get this working you have to have a fairly recent docker binary
otherwise you will see the error message:
=> ERROR importing cache manifest from registry.gitlab....
So far docker 19.03.12 works (from the docker apt repos) but 18.09.1,
build 4c52b90 which is packaged in Debian Buster fails.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-39-alex.bennee@linaro.org>
Most of the time we are just rebuilding the same things. We can skip
this although currently there is no mechanism for picking up new
distro releases.
Rather than try to be too fine grained allow any change to trigger all
the images being rebuilt.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-38-alex.bennee@linaro.org>
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
According to the documentation to be able to use --cache-from for
remote registries you need to enable both buildkit and inline the
metadata. We want to do this to support pulling from gitlab when users
build their local docker images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-24-alex.bennee@linaro.org>
We have a number of container images in tests/docker/dockerfiles
that are intended to provide well defined environments for doing
test builds. We want our CI system to use these containers too.
This introduces builds of all of them as the first stage in the
CI, so that the built containers are available for later build
jobs. The containers are setup to use the GitLab container
registry as the cache, so we only pay the penalty of the full
build when the dockerfiles change. The main qemu-project/qemu
repo is used as a second cache, so that users forking QEMU will
see a fast turnaround time on their CI jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-3-berrange@redhat.com>
[AJB: tweak the tag format]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-22-alex.bennee@linaro.org>
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
Message-Id: <20200701135652.1366-21-alex.bennee@linaro.org>
The edk2.yml and opensbi.yml files have recently been moved/renamed,
but the change has not been reflected in the rules in the YML files
yet.
Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200625151627.24986-1-thuth@redhat.com>
Message-Id: <20200701135652.1366-20-alex.bennee@linaro.org>
We have a dedicated folder for the gitlab-ci - so there is no need
to clutter the top directory with these .yml files.
Message-Id: <20200525131823.715-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add two GitLab jobs to build the OpenSBI firmware binaries.
The first job builds a Docker image with the packages requisite
to build OpenSBI, and stores this image in the GitLab registry.
The second job pulls the image from the registry and builds the
OpenSBI firmware binaries.
The docker image is only rebuilt if the GitLab YAML or the
Dockerfile is updated. The second job is only built when the
roms/opensbi/ submodule is updated, when a git-ref starts with
'opensbi' or when the last commit contains 'OpenSBI'. The files
generated are archived in the artifacts.zip file.
With OpenSBI v0.6, it took 2 minutes 56 seconds to build
the docker image, and 1 minute 24 seconds to generate the
artifacts.zip with the firmware binaries (filesize: 111KiB).
See: https://gitlab.com/lbmeng/qemu/pipelines/120520138
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add two GitLab job to build the EDK2 firmware binaries.
The first job build a Docker image with the packages requisite
to build EDK2, and store this image in the GitLab registry.
The second job pull the image from the registry and build the
EDK2 firmware binaries.
The docker image is only rebuilt if the GitLab YAML or the
Dockerfile is updated.
The second job is only built when the roms/edk2/ submodule is
updated, when a git-ref starts with 'edk2' or when the last
commit contains 'EDK2'. The files generated are archived in
the artifacts.zip file.
With edk2-stable201905, it took 2 minutes 52 seconds to build
the docker image, and 36 minutes 28 seconds to generate the
artifacts.zip with the firmware binaries (filesize: 10MiB).
See: https://gitlab.com/philmd/qemu/pipelines/107553178
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
