flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.
The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.
Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.
(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
now 'qmp-shell' should be available from the command line when
installing the python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-42-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Remove the shebang, and add a package-defined entry point instead. Now,
it can be accessed using 'qemu-ga-client' from the command line after
installing the package.
The next commit adds a forwarder shim that allows the running of this
script without needing to install the package again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The 'fuse' command will be unavailable if 'fusepy' is not installed. It
will simply not load and subsequently be unavailable as a subcommand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In preparation for moving qom-fuse over to the python package, we need
some new dependencies to support it.
Add an optional 'fusepy' dependency that users of the package can opt
into with e.g. "pip install qemu[fuse]" which installs the requirements
necessary to obtain the additional functionality.
Add the same fusepy dependency to the 'devel' extras group --
unfortunately I do not see a way for optional groups to imply other
optional groups at present, so the dependency is repeated. The
development group needs to include the full set of dependencies for the
purpose of static analysis of all features offered by this library.
Lastly, add the [fuse] extras group to tox's configuration as a
workaround so that if a stale tox environment is found when running
`make check-tox`, tox will know to rebuild its environments.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Because fusepy does not have type hints, add some targeted warning
suppressions.
Namely, we need to allow subclassing something of an unknown type (in
qom_fuse.py), and we need to allow missing imports (recorded against
fuse itself) because mypy will be unable to import fusepy (even when
installed) as it has no types nor type stubs available.
Note: Until now, it was possible to run invocations like 'mypy qemu/'
from ./python and have that work. However, these targeted suppressions
require that you run 'mypy -p qemu/' instead. The correct, canonical
invocation is recorded in ./python/tests/mypy.sh and all of the various
CI invocations always use this correct form.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
fd and fh are fine: we often use these for "file descriptor" or "file
handle" accordingly. It is rarely the case that you need to enforce a
more semantically meaningful name beyond "This is the file we are using
right now."
While we're here: add comments for all of the non-standard pylint
names. (And the underscore.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add the 'qom', 'qom-set', 'qom-get', 'qom-list', and 'qom-tree' scripts
to the qemu.qmp package. When you install this package, these scripts
will become available on your command line.
(e.g. when inside of a venv, `cd python && pip install .` will add
'qom', 'qom-set', etc to your $PATH.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is intended to be a manually run, non-CI script.
Use tox to test the linters against all python versions from 3.6 to
3.10. This will only work if you actually have those versions installed
locally, but Fedora makes this easy:
> sudo dnf install python3.6 python3.7 python3.8 python3.9 python3.10
Unlike the pipenv tests (make venv-check), this pulls "whichever"
versions of the python packages, so they are unpinned and may break as
time goes on. In the case that breakages are found, setup.cfg should be
amended accordingly to avoid the bad dependant versions, or the code
should be amended to work around the issue.
With confidence that the tests pass on 3.6 through 3.10 inclusive, add
the appropriate classifiers to setup.cfg to indicate which versions we
claim to support.
Tox 3.18.0 or above is required to use the 'allowlist_externals' option.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-31-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Try using avocado to manage our various tests; even though right now
they're only invoking shell scripts and not really running any
python-native code.
Create tests/, and add shell scripts which call out to mypy, flake8,
pylint and isort to enforce the standards in this directory.
Add avocado-framework to the setup.cfg development dependencies, and add
avocado.cfg to store some preferences for how we'd like the test output
to look.
Finally, add avocado-framework to the Pipfile environment and lock the
new dependencies. We are using avocado >= 87.0 here to take advantage of
some features that Cleber has helpfully added to make the test output
here *very* friendly and easy to read for developers that might chance
upon the output in Gitlab CI.
[Note: ALL of the dependencies get updated to the most modern versions
that exist at the time of this writing. No way around it that I have
seen. Not ideal, but so it goes.]
Provided you have the right development dependencies (mypy, flake8,
isort, pylint, and now avocado-framework) You should be able to run
"avocado --config avocado.cfg run tests/" from the python folder to run
all of these linters with the correct arguments.
(A forthcoming commit adds the much easier 'make check'.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
setuptools doesn't have a formal understanding of development requires,
but it has an optional feataures section. Fine; add a "devel" feature
and add the requirements to it.
To avoid duplication, we can modify pipenv to install qemu[devel]
instead. This enables us to run invocations like "pip install -e
.[devel]" and test the package on bleeding-edge packages beyond those
specified in Pipfile.lock.
Importantly, this also allows us to install the qemu development
packages in a non-networked mode: `pip3 install --no-index -e .[devel]`
will now fail if the proper development dependencies are not already
met. This can be useful for automated build scripts where fetching
network packages may be undesirable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-27-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
0.730 appears to be about the oldest version that works with the
features we want, including nice human readable output (to make sure
iotest 297 passes), and type-parameterized Popen generics.
0.770, however, supports adding 'strict' to the config file, so require
at least 0.770.
Now that we are checking a namespace package, we need to tell mypy to
allow PEP420 namespaces, so modify the mypy config as part of the move.
mypy can now be run from the python root by typing 'mypy -p qemu'.
A note on mypy invocation: Running it as "mypy qemu/" changes the import
path detection mechanisms in mypy slightly, and it will fail. See
https://github.com/python/mypy/issues/8584 for a decent entry point with
more breadcrumbs on the various behaviors that contribute to this subtle
difference.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
mypy supports reading its configuration values from a central project
configuration file; do so.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instruct flake8 to avoid certain well-known directories created by
python tooling that it ought not check.
Note that at-present, nothing actually creates a ".venv" directory; but
it is in such widespread usage as a de-facto location for a developer's
virtual environment that it should be excluded anyway. A forthcoming
commit canonizes this with a "make venv" command.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update the comment concerning the flake8 exception to match commit
42c0dd12, whose commit message stated:
A note on the flake8 exception: flake8 will warn on *any* bare except,
but pylint's is context-aware and will suppress the warning if you
re-raise the exception.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Delete the empty settings now that it's sharing a home with settings for
other tools.
pylint can now be run from this folder as "pylint qemu".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python infrastructure as it exists today is not capable reliably of
single-sourcing a package version from a parent directory. The authors
of pip are working to correct this, but as of today this is not possible.
The problem is that when using pip to build and install a python
package, it copies files over to a temporary directory and performs its
build there. This loses access to any information in the parent
directory, including git itself.
Further, Python versions have a standard (PEP 440) that may or may not
follow QEMU's versioning. In general, it does; but naturally QEMU does
not follow PEP 440. To avoid any automatically-generated conflict, a
manual version file is preferred.
I am proposing:
- Python tooling follows the QEMU version, indirectly, but with a major
version of 0 to indicate that the API is not expected to be
stable. This would mean version 0.5.2.0, 0.5.1.1, 0.5.3.0, etc.
- In the event that a Python package needs to be updated independently
of the QEMU version, a pre-release alpha version should be preferred,
but *only* after inclusion to the qemu development or stable branches.
e.g. 0.5.2.0a1, 0.5.2.0a2, and so on should be preferred prior to
5.2.0's release.
- The Python core tooling makes absolutely no version compatibility
checks or constraints. It *may* work with releases of QEMU from the
past or future, but it is not required to.
i.e., "qemu.machine" will, for now, remain in lock-step with QEMU.
- We reserve the right to split the qemu package into independently
versioned subpackages at a later date. This might allow for us to
begin versioning QMP independently from QEMU at a later date, if
we so choose.
Implement this versioning scheme by adding a VERSION file and setting it
to 0.6.0.0a1.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add setup.cfg and setup.py, necessary for installing a package via
pip. Add a ReST document (PACKAGE.rst) explaining the basics of what
this package is for and who to contact for more information. This
document will be used as the landing page for the package on PyPI.
List the subpackages we intend to package by name instead of using
find_namespace because find_namespace will naively also packages tests,
things it finds in the dist/ folder, etc. I could not figure out how to
modify this behavior; adding allow/deny lists to setuptools kept
changing the packaged hierarchy. This works, roll with it.
I am not yet using a pyproject.toml style package manifest, because
"editable" installs are not defined (yet?) by PEP-517/518.
I consider editable installs crucial for development, though they have
(apparently) always been somewhat poorly defined.
Pip now (19.2 and later) now supports editable installs for projects
using pyproject.toml manifests, but might require the use of the
--no-use-pep517 flag, which somewhat defeats the point. Full support for
setup.py-less editable installs was not introduced until pip 21.1.1:
7a95720e79
For now, while the dust settles, stick with the de-facto
setup.py/setup.cfg combination supported by setuptools. It will be worth
re-evaluating this point again in the future when our supported build
platforms all ship a fairly modern pip.
Additional reading on this matter:
https://github.com/pypa/packaging-problems/issues/256https://github.com/pypa/pip/issues/6334https://github.com/pypa/pip/issues/6375https://github.com/pypa/pip/issues/6434https://github.com/pypa/pip/issues/6438
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
