It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.
From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As of d98bc0b65 there are two files that are automatically generated:
ui/shader/texture-blit-frag.h and /ui/shader/texture-blit-vert.h. None
of them is wanted to be tracked by git. Put them into the ignore file
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
kvm_stat.{1,pod} started showing up as untracked files in my
directory, and I nearly accidentally merged them into a commit
with my usual habit of 'git add .'. Rather than spelling out
each such file, just ignore the entire pattern.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for
tracing events in guest code:
* trace_${event}_tcg
Convenience wrapper that calls the translation-time tracer
'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to
generate the TCG code to later trace the event at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG
helper wrappers.
These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native
and TCG argument types to TCG types and call the actual TCG helpers
('gen_helper_trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace
events in guest code at execution time.
The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native
argument types to their original types (as defined in "trace-events") and call
the tracing routine ('trace_${event}_exec').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace
events in guest code at execution time ('trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.
Put all our temporary files in a single temporary directory created
as a subdirectory of the build directory, so we can easily clean it up,
and don't need fragile or complicated code for creation to avoid it
clashing with temporary directories from other instances of QEMU
configure or being subject to attack from adversaries who can write
to /tmp.
Since the temporaries now live in the build tree, we have no
need to jump through hoops with a trap handler to try to remove
them when configure exits; this fixes some weird bugs where hitting
^C during a configure run wouldn't actually make it stop, because
we would run the trap handler but then not stop. (It is possible
to get the trap handler semantics right but it is convoluted largely
because of bugs in dash, so it is simpler to just avoid it.)
Note that "temporary files go in the build directory, not /tmp" is
the way autoconf behaves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A few more cleanups for .gitignore file.
The final goal is to have only files in there which
are generated during build. Things like .orig or
.gdbinit are definitely not generated during build.
Also, anchor a few more build-time directories.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The folder "qga/qapi-generated" shows up after building QEMU, and
gets in the way during e.g. "git add ."; Add it to .gitignore to
keep it from accidentally ending up in the wrong place.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
by default, patterns/names in .gitignore are applied
recursively to all subdirectories. So any name mentioned
in .gitignore is ignored in all subdirectores. This is good
for, say. object files (*.o), but not good for particular
names which should be ignored only in one directory. For
example, qemu-img.1 file is generated in the top directory,
and it should be ignored only there, not in some subdir.
At first, this might not matter much, but we have lots of
examples already where it actually does not help at all.
For example, top-level .gitignore ignores a file/dir named
"patches" (which is very questionable by itself), but it
is applied recursively, so git also ignores, for example,
debian/patches/ which should not be ignored.
So anchor all the names where appropriate. .gitignore
should be cleaned up further, which will be addressed in
a subsequent patch.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This file is moved out from QMP/ to BUILD dir, change the ignore file
too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to commit 4f193e34
("tests: Use qapi-schema-test.json as schema parser test")
the "tests/qapi-schema/qapi-schema-test.out" file must be updated as well.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
"test-int128" was probably missed in commit 6046c620
("int128: optimize and add test cases").
"test-bitops" was probably missed in commit 3464700f
("tests: Add test-bitops.c with some sextract tests").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This partially reverts:
commit 082369e62c
Author: liguang <lig.fnst@cn.fujitsu.com>
Date: Fri Mar 22 16:44:13 2013 +0800
gitignore: ignore more files
I'm not sure how this went in. The thing is that
ignoring *.patch, in my opinion, is just wrong.
Especially for downstreams who apply patches for
real.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds a makefile, so we can build our ccw firmware. Also
add the resulting binaries to .gitignore, so that nobody is annoyed
they might be in the tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
For a while the file was called trace/generated-tracers-dtrace.dtrace
but today it's called trace/generated-tracers.dtrace.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds sample hook scripts for --fsfreeze-hook option of qemu-ga.
- fsfreeze-hook : execute scripts in fsfreeze-hook.d/
- fsfreeze-hook.d/mysql-flush.sh.sample : quiesce MySQL before snapshot
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
--
Changes in v2:
* Do not depend on "qemu-timer-common.o".
* Use "$(obj)" in rules to refer to the build sub-directory.
* Remove dependencies against "$(GENERATED_HEADERS)".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a few previously missing generated files to .gitignore: the
qemu-bridge-helper binary, and more generated versions of the
linuxboot, multiboot and kvmvapic roms from pc-bios/optionrom.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
This imports and builds the original VAPIC option ROM of qemu-kvm.
Its interaction with QEMU is described in the commit that introduces the
corresponding device model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds several auto-generated files to .gitignore which were
previously missing.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
.gitignore already lists the qapi-generated subdirectory which includes a
number of files generated during build. However, there are some additional
files generated by the qapi build which go in the top level directory.
This patch adds them to .gitignore, removing the irritating noise from
diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
linux-headers/asm is a symlink generated during configure. It should not,
therefore be committed to git, nor show up in git diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
To run automated tests for coroutines:
make test-coroutine
./test-coroutine
On success the program terminates with exit status 0. On failure an
error message is written to stderr and the program exits with exit
status 1.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add a new binary and generation directory to the gitignore file
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the etags output generated by "make TAGS" and editor backup files
to .gitignore.
This patch has previously appeared in my series of patches to add
pSeries emulation support. However, it obviously has no real
connection to that, and can be applied seperately.
Please apply.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>