We are going to add one more option of enum type. Let's refactor option
parsing so that we can simply work with BlockdevOptionsCbw object.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently we use 'id' option as the name of VDUSE device.
It's a bit confusing since we use one value for two different
purposes: the ID to identfy the export within QEMU (must be
distinct from any other exports in the same QEMU process, but
can overlap with names used by other processes), and the VDUSE
name to uniquely identify it on the host (must be distinct from
other VDUSE devices on the same host, but can overlap with other
export types like NBD in the same process). To make it clear,
this patch adds a separate 'name' option to specify the VDUSE
name for the vduse-blk export instead.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220614051532.92-7-xieyongji@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a 'serial' option to allow user to specify this value
explicitly. And the default value is changed to an empty
string as what we did in "hw/block/virtio-blk.c".
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220614051532.92-6-xieyongji@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CID 1488362 points out that the second 'rc >= 0' check is now dead
code.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 172f5f1a40(nbd: remove peppering of nbd_client_connected)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220516210519.76135-1-eblake@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 64-bit platforms, assigning SIZE_MAX to the int64_t max_pdiscard
results in a negative value, and the following assertion would trigger
down the line (it's not the same max_pdiscard, but computed from the
other one):
qemu-system-x86_64: ../block/io.c:3166: bdrv_co_pdiscard: Assertion
`max_pdiscard >= bs->bl.request_alignment' failed.
On 32-bit platforms, it's fine to keep using SIZE_MAX.
The assertion in qemu_gluster_co_pdiscard() is checking that the value
of 'bytes' can safely be passed to glfs_discard_async(), which takes a
size_t for the argument in question, so it is kept as is. And since
max_pdiscard is still <= SIZE_MAX, relying on max_pdiscard is still
fine.
Fixes: 0c8022876f ("block: use int64_t instead of int in driver discard handlers")
Cc: qemu-stable@nongnu.org
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220520075922.43972-1-f.ebner@proxmox.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the namespace does not exist, rbd_create() fails with -ENOENT and
QEMU reports a generic "error rbd create: No such file or directory":
$ qemu-img create rbd:rbd/namespace/image 1M
Formatting 'rbd:rbd/namespace/image', fmt=raw size=1048576
qemu-img: rbd:rbd/namespace/image: error rbd create: No such file or directory
Unfortunately rados_ioctx_set_namespace() does not fail if the namespace
does not exist, so let's use rbd_namespace_exists() in qemu_rbd_connect()
to check if the namespace exists, reporting a more understandable error:
$ qemu-img create rbd:rbd/namespace/image 1M
Formatting 'rbd:rbd/namespace/image', fmt=raw size=1048576
qemu-img: rbd:rbd/namespace/image: namespace 'namespace' does not exist
Reported-by: Tingting Mao <timao@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220517071012.6120-1-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To support reconnecting after restart or crash, VDUSE backend
might need to resubmit inflight I/Os. This stores the metadata
such as the index of inflight I/O's descriptors to a shm file so
that VDUSE backend can restore them during reconnecting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220523084611.91-9-xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To support block resize, this uses vduse_dev_update_config()
to update the capacity field in configuration space and inject
config interrupt on the block resize callback.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220523084611.91-8-xieyongji@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This implements a VDUSE block backends based on
the libvduse library. We can use it to export the BDSs
for both VM and container (host) usage.
The new command-line syntax is:
$ qemu-storage-daemon \
--blockdev file,node-name=drive0,filename=test.img \
--export vduse-blk,node-name=drive0,id=vduse-export0,writable=on
After the qemu-storage-daemon started, we need to use
the "vdpa" command to attach the device to vDPA bus:
$ vdpa dev add name vduse-export0 mgmtdev vduse
Also the device must be removed via the "vdpa" command
before we stop the qemu-storage-daemon.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220523084611.91-7-xieyongji@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Abstract the common logic of virtio-blk I/O process to a function
named virtio_blk_process_req(). It's needed for the following commit.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220523084611.91-4-xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now the req->size is set to the correct value only
when handling VIRTIO_BLK_T_GET_ID request. This patch
fixes it.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220523084611.91-3-xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This supports passing NULL ops to blk_set_dev_ops()
so that we can remove stale ops in some cases.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220523084611.91-2-xieyongji@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much logic to simply check that bitmaps are of the same
size. Let's just define that hbitmap_merge() and
bdrv_dirty_bitmap_merge_internal() require their argument bitmaps be of
same size, this simplifies things.
Let's look through the callers:
For backup_init_bcs_bitmap() we already assert that merge can't fail.
In bdrv_reclaim_dirty_bitmap_locked() we gracefully handle the error
that can't happen: successor always has same size as its parent, drop
this logic.
In bdrv_merge_dirty_bitmap() we already has assertion and separate
check. Make the check explicit and improve error message.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220517111206.23585-4-v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need extra bitmap. All we need is to backup the original
bitmap when we do first merge. So, drop extra temporary bitmap and work
directly with target and backup.
Still to keep old semantics, that on failure target is unchanged and
user don't need to restore, we need a local_backup variable and do
restore ourselves on failure path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220517111206.23585-3-v.sementsov-og@mail.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the end we ignore failure of bdrv_merge_dirty_bitmap() and report
success. And still set errp. That's wrong.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220517111206.23585-2-v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_drain() has not been used since commit 9a0cec664e ("mirror:
use bdrv_drained_begin/bdrv_drained_end") in 2016. Remove it so there
are fewer drain scenarios to worry about.
Use bdrv_drained_begin()/bdrv_drained_end() instead. They are "mixed"
functions that can be called from coroutine context. Unlike
bdrv_co_drain(), these functions provide control of the length of the
drained section, which is usually the right thing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220521122714.3837731-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It may not be obvious why laio_io_unplug() checks max batch. I discussed
this with Stefano and have added a comment summarizing the reason.
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220609164712.1539045-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Every laio_io_plug() call has a matching laio_io_unplug() call. There is
a plugged counter that tracks the number of levels of plugging and
allows for nesting.
The plugged counter must reflect the balance between laio_io_plug() and
laio_io_unplug() calls accurately. Otherwise I/O stalls occur since
io_submit(2) calls are skipped while plugged.
Reported-by: Nikolay Tenev <nt@storpool.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220609164712.1539045-2-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 68d7946648 ("linux-aio: add `dev_max_batch` parameter to laio_io_unplug()")
[Stefano Garzarella suggested adding a Fixes tag.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Linux recently added a new io_uring(7) optimization API that QEMU
doesn't take advantage of yet. The liburing library that QEMU uses
has added a corresponding new API calling io_uring_register_ring_fd().
When this API is called after creating the ring, the io_uring_submit()
library function passes a flag to the io_uring_enter(2) syscall
allowing it to skip the ring file descriptor fdget()/fdput()
operations. This saves some CPU cycles.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20220531105011.111082-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_co_queue_restart_all is basically the same as qemu_co_enter_all
but without a QemuLockable argument. That's perfectly fine, but only as
long as the function is marked coroutine_fn. If used outside coroutine
context, qemu_co_queue_wait will attempt to take the lock and that
is just broken: if you are calling qemu_co_queue_restart_all outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker to qemu_co_queue_restart_all and to its sole
non-coroutine_fn caller; it then reimplements the function in terms of
qemu_co_enter_all_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
VMDK disk data is stored in extents, which may or may not be separate
from bs->file. VmdkExtent.file points to where they are stored. Each
that is stored in bs->file will simply reuse the exact pointer value of
bs->file.
(That is why vmdk_free_extents() will unref VmdkExtent.file (e->file)
only if e->file != bs->file.)
Reopen operations can change bs->file (they will replace the whole
BdrvChild object, not just the BDS stored in that BdrvChild), and then
we will need to change all .file pointers of all such VmdkExtents to
point to the new BdrvChild.
In vmdk_reopen_prepare(), we have to check which VmdkExtents are
affected, and in vmdk_reopen_commit(), we can modify them. We have to
split this because:
- The new BdrvChild is created only after prepare, so we can change
VmdkExtent.file only in commit
- In commit, there no longer is any (valid) reference to the old
BdrvChild object, so there would be nothing to compare VmdkExtent.file
against to see whether it was equal to bs->file before reopening
(There is BDRVReopenState.old_file_bs, but the old bs->file
BdrvChild's .bs pointer will be NULL-ed when the new BdrvChild is
created, and so we cannot compare VmdkExtent.file->bs against
BDRVReopenState.old_file_bs)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220314162719.65384-2-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_co_invalidate_cache() closes and opens the qcow2 file, by calling
qcow2_close() and qcow2_do_open(). These two functions must thus be
usable from both a global-state and an I/O context.
As they are, they are not safe to call in an I/O context, because they
use bdrv_unref_child() and bdrv_open_child() to close/open the data_file
child, respectively, both of which are global-state functions. When
used from qcow2_co_invalidate_cache(), we do not need to close/open the
data_file child, though (we do not do this for bs->file or bs->backing
either), and so we should skip it in the qcow2_co_invalidate_cache()
path.
To do so, add a parameter to qcow2_do_open() and qcow2_close() to make
them skip handling s->data_file, and have qcow2_co_invalidate_cache()
exempt it from the memset() on the BDRVQcow2State.
(Note that the QED driver similarly closes/opens the QED image by
invoking bdrv_qed_close()+bdrv_qed_do_open(), but both functions seem
safe to use in an I/O context.)
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/945
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
requests[].receiving is set by nbd_receive_replies() under the receive_mutex;
Read it under the same mutex as well. Waking up receivers on errors happens
after each reply finishes processing, in nbd_co_receive_one_chunk().
If there is no currently-active reply, there are two cases:
* either there is no active request at all, in which case no
element of request[] can have .receiving = true
* or nbd_receive_replies() must be running and owns receive_mutex;
in that case it will get back to nbd_co_receive_one_chunk() because
the socket has been shutdown, and all waiting coroutines will wake up
in turn.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-9-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Remove the confusing, and most likely wrong, atomics. The only function
that used to be somewhat in a hot path was nbd_client_connected(),
but it is not anymore after the previous patches.
The same logic is used both to check if a request had to be reissued
and also in nbd_reconnecting_attempt(). The former cases are outside
requests_lock, while nbd_reconnecting_attempt() does have the lock,
therefore the two have been separated in the previous commit.
nbd_client_will_reconnect() can simply take s->requests_lock, while
nbd_reconnecting_attempt() can inline the access now that no
complicated atomics are involved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-8-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare for the next patch, so that the diff is less confusing.
nbd_client_connecting is moved closer to the definition point.
nbd_client_connecting_wait() is kept only for the reconnection
logic; when it is used to check if a request has to be reissued,
use the renamed function nbd_client_will_reconnect(). In the
next patch, the two cases will have different locking requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
The condition for waiting on the s->free_sema queue depends on
both s->in_flight and s->state. The latter is currently using
atomics, but this is quite dubious and probably wrong.
Because s->state is written in the main thread too, for example by
the yank callback, it cannot be protected by a CoMutex. Introduce a
separate lock that can be used by nbd_co_send_request(); later on this
lock will also be used for s->state. There will not be any contention
on the lock unless there is a yank or reconnect, so this is not
performance sensitive.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-6-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Elevate s->in_flight early so that other incoming requests will wait
on the CoQueue in nbd_co_send_request; restart them after getting back
from nbd_reconnect_attempt. This could be after the reconnect timer or
nbd_cancel_in_flight have cancelled the attempt, so there is no
need anymore to cancel the requests there.
nbd_co_send_request now handles both stopping and restarting pending
requests after a successful connection, and there is no need to
hold send_mutex in nbd_co_do_establish_connection. The current setup
is confusing because nbd_co_do_establish_connection is called both with
send_mutex taken and without it. Before the patch it uses free_sema which
(at least in theory...) is protected by send_mutex, after the patch it
does not anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wrap long line]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
It is unnecessary to check nbd_client_connected() because every time
s->state is moved out of NBD_CLIENT_CONNECTED the socket is shut down
and all coroutines are resumed.
The only case where it was actually needed is when the NBD
server disconnects and there is no reconnect-delay. In that
case, nbd_receive_replies() does not set s->reply.handle and
nbd_co_do_receive_one_chunk() cannot continue. For that one case,
check the return value of nbd_receive_replies().
As to the others:
* nbd_receive_replies() can put the current coroutine to sleep if another
reply is ongoing; then it will be woken by nbd_channel_error(), called
by the ongoing reply. Or it can try itself to read a reply header and
fail, thus calling nbd_channel_error() itself.
* nbd_co_send_request() will write the body of the request and fail
* nbd_reply_chunk_iter_receive() will call nbd_co_receive_one_chunk()
and then nbd_co_do_receive_one_chunk(), which will handle the failure as
above; or it will just detect a previous call to nbd_iter_channel_error()
via iter->ret < 0.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-4-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several coroutine functions in block/nbd.c are not marked as such. This
patch adds a few more markers; it is not exhaustive, but it focuses
especially on:
- places that wake other coroutines, because aio_co_wake() has very
different semantics inside a coroutine (queuing after yield vs. entering
immediately);
- functions with _co_ in their names, to avoid confusion
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-3-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
The .reply_possible field of s->requests is never set to false. This is
not a problem as it is only a safeguard to detect protocol errors,
but it's sloppy. In fact, the field is actually not necessary at all,
because .coroutine is set to NULL in NBD_FOREACH_REPLY_CHUNK after
receiving the last chunk. Thus, replace .reply_possible with .coroutine
and move the check before deciding the fate of this request.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
* blockdev-open-tray
* blockdev-remove-medium
* blockdev-insert-medium
* blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
Device 'scsi0-0-1-0' is locked and force was not specified,
wait for tray to open and try again.
This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of fprint()-ing error messages in rebuild_refcount_structure()
and its rebuild_refcounts_write_refblocks() helper, pass them through an
Error object to qcow2_check_refcounts() (which will then print it).
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When rebuilding the refcount structures (when qemu-img check -r found
errors with refcount = 0, but reference count > 0), the new refcount
table defaults to being put at the image file end[1]. There is no good
reason for that except that it means we will not have to rewrite any
refblocks we already wrote to disk.
Changing the code to rewrite those refblocks is not too difficult,
though, so let us do that. That is beneficial for images on block
devices, where we cannot really write beyond the end of the image file.
Use this opportunity to add extensive comments to the code, and refactor
it a bit, getting rid of the backwards-jumping goto.
[1] Unless there is something allocated in the area pointed to by the
last refblock, so we have to write that refblock. In that case, we
try to put the reftable in there.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1519071
Closes: https://gitlab.com/qemu-project/qemu/-/issues/941
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-2-hreitz@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the stream block job cuts out the nodes between top and base in
stream_prepare(), it does not drain the subtree manually; it fetches the
base node, and tries to insert it as the top node's backing node with
bdrv_set_backing_hd(). bdrv_set_backing_hd() however will drain, and so
the actual base node might change (because the base node is actually not
part of the stream job) before the old base node passed to
bdrv_set_backing_hd() is installed.
This has two implications:
First, the stream job does not keep a strong reference to the base node.
Therefore, if it is deleted in bdrv_set_backing_hd()'s drain (e.g.
because some other block job is drained to finish), we will get a
use-after-free. We should keep a strong reference to that node.
Second, even with such a strong reference, the problem remains that the
base node might change before bdrv_set_backing_hd() actually runs and as
a result the wrong base node is installed.
Both effects can be seen in 030's TestParallelOps.test_overlapping_5()
case, which has five nodes, and simultaneously streams from the middle
node to the top node, and commits the middle node down to the base node.
As it is, this will sometimes crash, namely when we encounter the
above-described use-after-free.
Taking a strong reference to the base node, we no longer get a crash,
but the resuling block graph is less than ideal: The expected result is
obviously that all middle nodes are cut out and the base node is the
immediate backing child of the top node. However, if stream_prepare()
takes a strong reference to its base node (the middle node), and then
the commit job finishes in bdrv_set_backing_hd(), supposedly dropping
that middle node, the stream job will just reinstall it again.
Therefore, we need to keep the whole subtree drained in
stream_prepare(), so that the graph modification it performs is
effectively atomic, i.e. that the base node it fetches is still the base
node when bdrv_set_backing_hd() sets it as the top node's backing node.
Verify this by asserting in said 030's test case that the base node is
always the top node's immediate backing child when both jobs are done.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324140907.17192-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
"0x%u" format is very misleading, replace by "0x%x".
Found running:
$ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' block/
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 20220323114718.58714-2-philippe.mathieu.daude@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
-----BEGIN PGP SIGNATURE-----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=fKgO
-----END PGP SIGNATURE-----
Merge tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu into staging
Fixes and cleanups for 7.0
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
# gpg: Signature made Tue 22 Mar 2022 12:11:30 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu: (21 commits)
qapi: remove needless include
Remove trailing ; after G_DEFINE_AUTO macro
tests: remove needless include
error: use GLib to remember the program name
qga: remove bswap.h include
qapi: remove needless include
meson: fix CONFIG_ATOMIC128 check
meson: move int128 checks from configure
qapi: remove needless include
util: remove the net/net.h dependency
util: remove needless includes
scripts/modinfo-collect: remove unused/dead code
Move HOST_LONG_BITS to compiler.h
Simplify HOST_LONG_BITS
compiler.h: replace QEMU_SENTINEL with G_GNUC_NULL_TERMINATED
compiler.h: replace QEMU_WARN_UNUSED_RESULT with G_GNUC_WARN_UNUSED_RESULT
Replace GCC_FMT_ATTR with G_GNUC_PRINTF
Drop qemu_foo() socket API wrapper
m68k/nios2-semi: fix gettimeofday() result check
vl: typo fix in a comment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- iotest fixes:
- Fix some iotests for riscv targets
- Use GNU sed in more places where required
- Meson-related fixes (i.e. to print errors when they occur)
- Have qemu-img calls (from Python tests) generally raise nicely
formattable exceptions on errors
- Fix iotest 207
- Allow RBD images to be growable by writing zeroes past the end of
file, fixing qcow2 on rbd
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmI5uC4SHGhyZWl0ekBy
ZWRoYXQuY29tAAoJEKH6QNCYAZzfsPIP/1iRUWmWd9h9m7gX5hSU+TWYXsH+Ua/G
fKdDHqNlVjQHq6SDN+A3jDCjAV9I91vlHRVIMWXc4QlKbdNdY7yUP1zYKuRTbfig
UXce6g1NQoZUIlBSHZDqzgEmrvjunwP1U2te2LWliQjmvlTJgdIHYUJn2VgmY3wg
2vo8exE3YO1FArS9nFsiX/1Ju35Dm4+3w9NkI6KxnKvaFpY++jovVVy2Bj7Jmfsh
bRnfiQtDVX+0H4FXYS02hDEX4h7PTzsd1DeapVbiiZW9KJrbb0rchTSGc+VKMdkC
z2XDfU+Hw4jYlNomuWdSZy6qJMNzUaKEqJMji1OiLym4429OAyseL8EO5c6Utjcb
RRqGKWBOp1ceFZcy8vmQ2Rxc7b3Nc/Jv41Ty7PbyHmrtd2nbgD+AVnlFH9qWDtZo
clvFSaIHcHaC4k+MppsbGTKvbW7qRYUkdk1B+tFlZytwQpFvM4oK2CF8jNzoLYfY
qJIvrBqgaBKnYzAGCV4qgH9I0gWY7WHwvwfevHy47rk7XDsErWKMfBFy294TYDyq
+yU6K1VijWDEn/DdQZMSZQJeE7ByA4cfSSYGRmwtTLOZxmUi4mEBEEo6Lw3x4eI2
eXj/fhRenbjfE+5p3xmWvEyaVvvyor9oXUPH45HN/LvGgUJmEsjs0XGwnNNwxJBT
s2lp8U5Lo4Lb
=0cG5
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-03-22' of https://gitlab.com/hreitz/qemu into staging
Block patches for 7.0-rc1:
- iotest fixes:
- Fix some iotests for riscv targets
- Use GNU sed in more places where required
- Meson-related fixes (i.e. to print errors when they occur)
- Have qemu-img calls (from Python tests) generally raise nicely
formattable exceptions on errors
- Fix iotest 207
- Allow RBD images to be growable by writing zeroes past the end of
file, fixing qcow2 on rbd
# gpg: Signature made Tue 22 Mar 2022 11:51:10 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-03-22' of https://gitlab.com/hreitz/qemu: (25 commits)
iotests/207: Filter host fingerprint
iotests.py: Filters for VM.run_job()
iotests: make qemu_img_log and img_info_log raise on error
iotests: remove qemu_img_pipe_and_status()
iotests: replace qemu_img_log('create', ...) calls
iotests: use qemu_img() in has_working_luks()
iotests: remove remaining calls to qemu_img_pipe()
iotests/149: Remove qemu_img_pipe() call
iotests: replace unchecked calls to qemu_img_pipe()
iotests: change supports_quorum to use qemu_img
iotests: add qemu_img_map() function
iotests/remove-bitmap-from-backing: use qemu_img_info()
iotests: add qemu_img_info()
iotests: use qemu_img_json() when applicable
iotests: add qemu_img_json()
iotests: fortify compare_images() against crashes
iotests: make qemu_img raise on non-zero rc by default
iotests: Remove explicit checks for qemu_img() == 0
python/utils: add VerboseProcessError
python/utils: add add_visual_margin() text decoration utility
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Commit d24f80234b ("block/rbd: increase dynamically the image size")
added a workaround to support growing images (eg. qcow2), resizing
the image before write operations that exceed the current size.
We recently added support for write zeroes and without the
workaround we can have problems with qcow2.
So let's move the resize into qemu_rbd_start_co() and do it when
the command is RBD_AIO_WRITE or RBD_AIO_WRITE_ZEROES.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2020993
Fixes: c56ac27d2a ("block/rbd: add write zeroes support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220317162638.41192-1-sgarzare@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
During the IO stress test, the IO request coroutine has a probability that is
can't be awakened when the NBD server is killed.
The GDB stack is as follows:
(gdb) bt
0 0x00007f2ff990cbf6 in __ppoll (fds=0x55575de85000, nfds=1, timeout=<optimized out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:44
1 0x000055575c302e7c in qemu_poll_ns (fds=0x55575de85000, nfds=1, timeout=599999603140) at ../util/qemu-timer.c:348
2 0x000055575c2d3c34 in fdmon_poll_wait (ctx=0x55575dc480f0, ready_list=0x7ffd9dd1dae0, timeout=599999603140) at ../util/fdmon-poll.c:80
3 0x000055575c2d350d in aio_poll (ctx=0x55575dc480f0, blocking=true) at ../util/aio-posix.c:655
4 0x000055575c16eabd in bdrv_do_drained_begin(bs=0x55575dee7fe0, recursive=false, parent=0x0, ignore_bds_parents=false, poll=true)at ../block/io.c:474
5 0x000055575c16eba6 in bdrv_drained_begin (bs=0x55575dee7fe0) at ../block/io.c:480
6 0x000055575c1aff33 in quorum_del_child (bs=0x55575dee7fe0, child=0x55575dcea690, errp=0x7ffd9dd1dd08) at ../block/quorum.c:1130
7 0x000055575c14239b in bdrv_del_child (parent_bs=0x55575dee7fe0, child=0x55575dcea690, errp=0x7ffd9dd1dd08) at ../block.c:7705
8 0x000055575c12da28 in qmp_x_blockdev_change(parent=0x55575df404c0 "colo-disk0", has_child=true, child=0x55575de867f0 "children.1", has_node=false, no de=0x0, errp=0x7ffd9dd1dd08) at ../blockdev.c:3676
9 0x000055575c258435 in qmp_marshal_x_blockdev_change (args=0x7f2fec008190, ret=0x7f2ff7b0bd98, errp=0x7f2ff7b0bd90) at qapi/qapi-commands-block-core.c :1675
10 0x000055575c2c6201 in do_qmp_dispatch_bh (opaque=0x7f2ff7b0be30) at ../qapi/qmp-dispatch.c:129
11 0x000055575c2ebb1c in aio_bh_call (bh=0x55575dc429c0) at ../util/async.c:141
12 0x000055575c2ebc2a in aio_bh_poll (ctx=0x55575dc480f0) at ../util/async.c:169
13 0x000055575c2d2d96 in aio_dispatch (ctx=0x55575dc480f0) at ../util/aio-posix.c:415
14 0x000055575c2ec07f in aio_ctx_dispatch (source=0x55575dc480f0, callback=0x0, user_data=0x0) at ../util/async.c:311
15 0x00007f2ff9e7cfbd in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
16 0x000055575c2fd581 in glib_pollfds_poll () at ../util/main-loop.c:232
17 0x000055575c2fd5ff in os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:255
18 0x000055575c2fd710 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
19 0x000055575bfa7588 in qemu_main_loop () at ../softmmu/runstate.c:726
20 0x000055575bbee57a in main (argc=60, argv=0x7ffd9dd1e0e8, envp=0x7ffd9dd1e2d0) at ../softmmu/main.c:50
(gdb) qemu coroutine 0x55575e16aac0
0 0x000055575c2ee7dc in qemu_coroutine_switch (from_=0x55575e16aac0, to_=0x7f2ff830fba0, action=COROUTINE_YIELD) at ../util/coroutine-ucontext.c:302
1 0x000055575c2fe2a9 in qemu_coroutine_yield () at ../util/qemu-coroutine.c:195
2 0x000055575c2fe93c in qemu_co_queue_wait_impl (queue=0x55575dc46170, lock=0x7f2b32ad9850) at ../util/qemu-coroutine-lock.c:56
3 0x000055575c17ddfb in nbd_co_send_request (bs=0x55575ebfaf20, request=0x7f2b32ad9920, qiov=0x55575dfc15d8) at ../block/nbd.c:478
4 0x000055575c17f931 in nbd_co_request (bs=0x55575ebfaf20, request=0x7f2b32ad9920, write_qiov=0x55575dfc15d8) at ../block/nbd.c:1182
5 0x000055575c17fe14 in nbd_client_co_pwritev (bs=0x55575ebfaf20, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, flags=0) at ../block/nbd.c:1284
6 0x000055575c170d25 in bdrv_driver_pwritev (bs=0x55575ebfaf20, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, qiov_offset=0, flags=0)
at ../block/io.c:1264
7 0x000055575c1733b4 in bdrv_aligned_pwritev
(child=0x55575dff6890, req=0x7f2b32ad9ad0, offset=403487858688, bytes=4538368, align=1, qiov=0x55575dfc15d8, qiov_offset=0, flags=0) at ../block/io.c:2126
8 0x000055575c173c67 in bdrv_co_pwritev_part (child=0x55575dff6890, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, qiov_offset=0, flags=0)
at ../block/io.c:2314
9 0x000055575c17391b in bdrv_co_pwritev (child=0x55575dff6890, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, flags=0) at ../block/io.c:2233
10 0x000055575c1ee506 in replication_co_writev (bs=0x55575e9824f0, sector_num=788062224, remaining_sectors=8864, qiov=0x55575dfc15d8, flags=0)
at ../block/replication.c:270
11 0x000055575c170eed in bdrv_driver_pwritev (bs=0x55575e9824f0, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, qiov_offset=0, flags=0)
at ../block/io.c:1297
12 0x000055575c1733b4 in bdrv_aligned_pwritev
(child=0x55575dcea690, req=0x7f2b32ad9e00, offset=403487858688, bytes=4538368, align=512, qiov=0x55575dfc15d8, qiov_offset=0, flags=0)
at ../block/io.c:2126
13 0x000055575c173c67 in bdrv_co_pwritev_part (child=0x55575dcea690, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, qiov_offset=0, flags=0)
at ../block/io.c:2314
14 0x000055575c17391b in bdrv_co_pwritev (child=0x55575dcea690, offset=403487858688, bytes=4538368, qiov=0x55575dfc15d8, flags=0) at ../block/io.c:2233
15 0x000055575c1aeffa in write_quorum_entry (opaque=0x7f2fddaf8c50) at ../block/quorum.c:699
16 0x000055575c2ee4db in coroutine_trampoline (i0=1578543808, i1=21847) at ../util/coroutine-ucontext.c:173
17 0x00007f2ff9855660 in __start_context () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
When we do failover in COLO mode, QEMU will hang while it is waiting for
the in-flight IO. From the call trace, we can see the IO request coroutine
has yielded in nbd_co_send_request(). When we kill the NBD server, it will never
be wake up. Actually, when we do IO stress test, it will have a lot of
requests in free_sema queue. When the NBD server is killed, current
MAX_NBD_REQUESTS finishes with errors but they wake up at most
MAX_NBD_REQEUSTS from the queue. So, let's move qemu_co_queue_next out
to fix this issue.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Message-Id: <20220309074844.275450-1-lei.rao@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When building on macOS 12 we get:
block/file-posix.c:3335:18: warning: 'IOMasterPort' is deprecated: first deprecated in macOS 12.0 [-Wdeprecated-declarations]
kernResult = IOMasterPort( MACH_PORT_NULL, &masterPort );
^~~~~~~~~~~~
IOMainPort
Replace by IOMainPort, redefining it to IOMasterPort if not available.
Suggested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed by: Cameron Esfahani <dirty@apple.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmImtE8ACgkQp6FrSiUn
Q2ovmgf/aksDqf2eNcahs++fez+8Qi9ll5OY/qGyjnzBgsatYKjrK+xF7OnjoJox
eRX026lh81Q4EQK7oZBUnr2UCY4bncDBTI7MTLh603EV/tId5ZLwx007ERhzvtC1
mIsQHXNuO9X25LQG2eWnfunY9YztQpiT5r/g3khD2yPBqJWIvBfblzPLx6FkF7px
/WM8xEKCihmGr1Wr3b+zGYL083YkaBWCvHoR8mJt3tEFUj+Qie8XcdV0OVyI0XUj
5goIFRcpVwBE8P2nLtfUKNzEXz22cmdonOJUX7E5IvGO21k5F/HrWlHdo8JnuSUZ
t0w5L9yCxBrRpY1burz30b77J0WMCw==
=C8Dd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-03-07' into staging
nbd patches for 2022-03-07
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
# gpg: Signature made Tue 08 Mar 2022 01:41:35 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2022-03-07:
qemu-io: Allow larger write zeroes under no fallback
qemu-io: Utilize 64-bit status during map
nbd/server: Minor cleanups
tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
tests/qemu-iotests: validate NBD TLS with UNIX sockets
tests/qemu-iotests: validate NBD TLS with hostname mismatch
tests/qemu-iotests: convert NBD TLS test to use standard filters
tests/qemu-iotests: introduce filter for qemu-nbd export list
tests/qemu-iotests: expand _filter_nbd rules
tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
block/nbd: don't restrict TLS usage to IP sockets
qemu-nbd: add --tls-hostname option for TLS certificate validation
block/nbd: support override of hostname for TLS certificate validation
block: pass desired TLS hostname through from block driver client
crypto: mandate a hostname when checking x509 creds on a client
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TLS usage for NBD was restricted to IP sockets because validating
x509 certificates requires knowledge of the hostname that the client
is connecting to.
TLS does not have to use x509 certificates though, as PSK (pre-shared
keys) provide an alternative credential option. These have no
requirement for a hostname and can thus be trivially used for UNIX
sockets.
Furthermore, with the ability to overide the default hostname for
TLS validation in the previous patch, it is now also valid to want
to use x509 certificates with FD passing and UNIX sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-6-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When connecting to an NBD server with TLS and x509 credentials,
the client must validate the hostname it uses for the connection,
against that published in the server's certificate. If the client
is tunnelling its connection over some other channel, however, the
hostname it uses may not match the info reported in the server's
certificate. In such a case, the user needs to explicitly set an
override for the hostname to use for certificate validation.
This is achieved by adding a 'tls-hostname' property to the NBD
block driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-4-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In
commit a71d597b98
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Thu Jun 10 13:08:00 2021 +0300
block/nbd: reuse nbd_co_do_establish_connection() in nbd_open()
the use of the 'hostname' field from the BDRVNBDState struct was
lost, and 'nbd_connect' just hardcoded it to match the IP socket
address. This was a harmless bug at the time since we block use
with anything other than IP sockets.
Shortly though, we want to allow the caller to override the hostname
used in the TLS certificate checks. This is to allow for TLS
when doing port forwarding or tunneling. Thus we need to reinstate
the passing along of the 'hostname'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
Current scheme of image fleecing looks like this:
[guest] [NBD export]
| |
|root | root
v v
[copy-before-write] -----> [temp.qcow2]
| target |
|file |backing
v |
[active disk] <-------------+
- On guest writes copy-before-write filter copies old data from active
disk to temp.qcow2. So fleecing client (NBD export) when reads
changed regions from temp.qcow2 image and unchanged from active disk
through backing link.
This patch makes possible new image fleecing scheme:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
- copy-before-write does CBW operations and also provides
snapshot-access API. The API may be accessed through
snapshot-access driver.
Benefits of new scheme:
1. Access control: if remote client try to read data that not covered
by original dirty bitmap used on copy-before-write open, client gets
-EACCES.
2. Discard support: if remote client do DISCARD, this additionally to
discarding data in temp.img informs block-copy process to not copy
these clusters. Next read from discarded area will return -EACCES.
This is significant thing: when fleecing user reads data that was
not yet copied to temp.img, we can avoid copying it on further guest
write.
3. Synchronisation between client reads and block-copy write is more
efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
used for writes to temp.qcow2. New scheme is less blocking:
- fleecing reads are never blocked: if data region is untouched or
in-flight, we just read from active-disk, otherwise we read from
temp.img
- writes to temp.img are not blocked by fleecing reads
- still, guest writes of-course are blocked by in-flight fleecing
reads, that currently read from active-disk - it's the minimum
necessary blocking
4. Temporary image may be of any format, as we don't rely on backing
feature.
5. Permission relation are simplified. With old scheme we have to share
write permission on target child of copy-before-write, otherwise
backing link conflicts with copy-before-write file child write
permissions. With new scheme we don't have backing link, and
copy-before-write node may have unshared access to temporary node.
(Not realized in this commit, will be in future).
6. Having control on fleecing reads we'll be able to implement
alternative behavior on failed copy-before-write operations.
Currently we just break guest request (that's a historical behavior
of backup). But in some scenarios it's a bad behavior: better
is to drop the backup as failed but don't break guest request.
With new scheme we can simply unset some bits in a bitmap on CBW
failure and further fleecing reads will -EACCES, or something like
this. (Not implemented in this commit, will be in future)
Additional application for this is implementing timeout for CBW
operations.
Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The new block driver simply utilizes snapshot-access API of underlying
block node.
In further patches we want to use it like this:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.
The other possible application is exporting internal snapshots of
qcow2, like this:
[guest] [NBD export]
| |
| root | root
v file v
[qcow2]<---------[snapshot-access]
For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to wait for all intersecting requests.
To be used in the further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.
Note: while being here, fix tiny typo in MAINTAINERS.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This brings "incremental" mode to copy-before-write filter: user can
specify bitmap so that filter will copy only "dirty" areas.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to complicate bitmap initialization in the further
commit. And in future, backup job will be able to work without filter
(when source is immutable), so we'll need same bitmap initialization in
copy-before-write filter and in backup job. So, it's reasonable to do
it in block-copy.
Note that for now cbw_open() is the only caller of
block_copy_state_new().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Coverity points out that we aren't checking the return value
from curl_easy_setopt() for any of the calls to it we make
in block/curl.c.
Some of these options are documented as always succeeding (e.g.
CURLOPT_VERBOSE) but others have documented failure cases (e.g.
CURLOPT_URL). For consistency we check every call, even the ones
that theoretically cannot fail.
Fixes: Coverity CID 1459336, 1459482, 1460331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In curl_open(), the 'out' label assumes that the state->errmsg string
has been set (either by curl_easy_perform() or by manually copying a
string into it); however if curl_init_state() fails we will jump to
that label without setting the string. Add the missing error string
setup.
(We can't be specific about the cause of failure: the documentation
of curl_easy_init() just says "If this function returns NULL,
something went wrong".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Otherwise, the BDS might be freed while the job is running, which would
cause a use-after-free.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-5-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_amend_clean() says block drivers can use it to clean up what was
done in .bdrv_amend_pre_run(). Therefore, it should always be called
after .bdrv_amend_pre_run(), which means we need it to call it in the
JobDriver.free() callback, not in JobDriver.clean().
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-3-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_refresh_limits() recurses down to the node's children. That does
not seem necessary: When we refresh limits on some node, and then
recurse down and were to change one of its children's BlockLimits, then
that would mean we noticed the changed limits by pure chance. The fact
that we refresh the parent's limits has nothing to do with it, so the
reason for the change probably happened before this point in time, and
we should have refreshed the limits then.
Consequently, we should actually propagate block limits changes upwards,
not downwards. That is a separate and pre-existing issue, though, and
so will not be addressed in this patch.
The problem with recursing is that bdrv_refresh_limits() is not atomic.
It begins with zeroing BDS.bl, and only then sets proper, valid limits.
If we do not drain all nodes whose limits are refreshed, then concurrent
I/O requests can encounter invalid request_alignment values and crash
qemu. Therefore, a recursing bdrv_refresh_limits() requires the whole
subtree to be drained, which is currently not ensured by most callers.
A non-recursive bdrv_refresh_limits() only requires the node in question
to not receive I/O requests, and this is done by most callers in some
way or another:
- bdrv_open_driver() deals with a new node with no parents yet
- bdrv_set_file_or_backing_noperm() acts on a drained node
- bdrv_reopen_commit() acts only on drained nodes
- bdrv_append() should in theory require the node to be drained; in
practice most callers just lock the AioContext, which should at least
be enough to prevent concurrent I/O requests from accessing invalid
limits
So we can resolve the bug by making bdrv_refresh_limits() non-recursive.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1879437
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220216105355.30729-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-27-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block coroutines functions run in different aiocontext, and are
not protected by the BQL. Therefore are I/O.
On the other side, generated_co_wrapper functions use BDRV_POLL_WHILE,
meaning the caller can either be the main loop or a specific iothread.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-25-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
copy-before-write functions always run under BQL.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-24-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-22-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the assertion derived from the API split,
propagate the assertion also in the static functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-18-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-13-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All the global state (GS) API functions will check that
qemu_in_main_thread() returns true. If not, it means
that the safety of BQL cannot be guaranteed, and
they need to be moved to I/O.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patches, split block-backend.h
in block-backend-io.h and block-backend-global-state.h
In addition, remove "block/block.h" include as it seems
it is not necessary anymore, together with "qemu/iov.h"
block-backend-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow writable exports to get BLK_PERM_RESIZE permission
from creation, in fuse_export_create().
In this way, there is no need to give the permission in
fuse_do_truncate(), which might be run in an iothread.
Permissions should be set only in the main thread, so
in any case if an iothread tries to set RESIZE, it will
be blocked.
Also assert in fuse_do_truncate that if we give the
RESIZE permission we can then restore the original ones.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303151616.325444-7-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All the global state (GS) API functions will check that
qemu_in_main_thread() returns true. If not, it means
that the safety of BQL cannot be guaranteed, and
they need to be moved to I/O.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block.h currently contains a mix of functions:
some of them run under the BQL and modify the block layer graph,
others are instead thread-safe and perform I/O in iothreads.
Some others can only be called by either the main loop or the
iothread running the AioContext (and not other iothreads),
and using them in another thread would cause deadlocks, and therefore
it is not ideal to define them as I/O.
It is not easy to understand which function is part of which
group (I/O vs GS vs "I/O or GS"), and this patch aims to clarify it.
The "GS" functions need the BQL, and often use
aio_context_acquire/release and/or drain to be sure they
can modify the graph safely.
The I/O function are instead thread safe, and can run in
any AioContext.
"I/O or GS" functions run instead in the main loop or in
a single iothread, and use BDRV_POLL_WHILE().
By splitting the header in two files, block-io.h
and block-global-state.h we have a clearer view on what
needs what kind of protection. block-common.h
contains common structures shared by both headers.
block.h is left there for legacy and to avoid changing
all includes in all c files that use the block APIs.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is currently just a wrapper for bdrv_invalidate_cache(),
but in future will contain the code of bdrv_co_invalidate_cache() that
has to always be protected by BQL, and leave the rest in the I/O
coroutine.
Replace all bdrv_invalidate_cache() invokations with bdrv_activate().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_crypto_amend_options_generic_luks uses the block layer
permission API, therefore it should be called with the BQL held.
However, the same function is being called by two BlockDriver
callbacks: bdrv_amend_options (under BQL) and bdrv_co_amend (I/O).
The latter is I/O because it is invoked by block/amend.c's
blockdev_amend_run(), a .run callback of the amend JobDriver.
Therefore we want to change this function to still perform
the permission check, but making sure it is done under BQL regardless
of the caller context.
Remove the permission check in block_crypto_amend_options_generic_luks()
and:
- in block_crypto_amend_options_luks() (BQL case, called by
.bdrv_amend_options()), reuse helper functions
block_crypto_amend_{prepare/cleanup} that take care of checking
permissions.
- for block_crypto_co_amend_luks() (I/O case, called by
.bdrv_co_amend()), don't check for permissions but delegate
.bdrv_amend_pre_run() and .bdrv_amend_clean() to do it,
performing these checks before and after the job runs in its aiocontext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
-----BEGIN PGP SIGNATURE-----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=PeCY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging
This misc series of changes:
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-next-pull-request:
docs: expand firmware descriptor to allow flash without NVRAM
MAINTAINERS: take over seccomp from Eduardo Otubo
seccomp: block setns, unshare and execveat syscalls
seccomp: block use of clone3 syscall
seccomp: fix blocking of process spawning
seccomp: add unit test for seccomp filtering
seccomp: allow action to be customized per syscall
block: print the server key type and fingerprint on failure
block: support sha256 fingerprint with pre-blockdev options
block: better document SSH host key fingerprint checking
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When validating the server key fingerprint fails, it is difficult for
the user to know what they got wrong. The fingerprint accepted by QEMU
is received in a different format than OpenSSH displays. There can also
be keys for multiple different ciphers in known_hosts. It may not be
obvious which cipher QEMU will use and whether it will be the same
as OpenSSH. Address this by printing the server key type and its
corresponding fingerprint in the format QEMU accepts.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for sha256 fingerprint checking was aded in
commit bf783261f0
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Jun 22 12:51:56 2021 +0100
block/ssh: add support for sha256 host key fingerprints
it was only made to work with -blockdev. Getting it working with
-drive requires some extra custom parsing.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
v2: add my s-o-b marks to each commit
-----BEGIN PGP SIGNATURE-----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=+lgn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-nbd-2022-02-09-v2' into staging
nbd: handle AioContext change correctly
v2: add my s-o-b marks to each commit
# gpg: Signature made Fri 11 Feb 2022 13:14:55 GMT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-nbd-2022-02-09-v2:
iotests/281: Let NBD connection yield in iothread
block/nbd: Move s->ioc on AioContext change
iotests/281: Test lingering timers
iotests.py: Add QemuStorageDaemon class
block/nbd: Assert there are no timers when closed
block/nbd: Delete open timer when done
block/nbd: Delete reconnect delay timer when done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s->ioc must always be attached to the NBD node's AioContext. If that
context changes, s->ioc must be attached to the new context.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2033626
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Our two timers must not remain armed beyond nbd_clear_bdrvstate(), or
they will access freed data when they fire.
This patch is separate from the patches that actually fix the issue
(HEAD^^ and HEAD^) so that you can run the associated regression iotest
(281) on a configuration that reproducibly exposes the bug.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We start the open timer to cancel the connection attempt after a while.
Once nbd_do_establish_connection() has returned, the attempt is over,
and we no longer need the timer.
Delete it before returning from nbd_open(), so that it does not persist
for longer. It has no use after nbd_open(), and just like the reconnect
delay timer, it might well be dangerous if it were to fire afterwards.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We start the reconnect delay timer to cancel the reconnection attempt
after a while. Once nbd_co_do_establish_connection() has returned, this
attempt is over, and we no longer need the timer.
Delete it before returning from nbd_reconnect_attempt(), so that it does
not persist beyond the I/O request that was paused for reconnecting; we
do not want it to fire in a drained section, because all sort of things
can happen in such a section (e.g. the AioContext might be changed, and
we do not want the timer to fire in the wrong context; or the BDS might
even be deleted, and so the timer CB would access already-freed data).
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
For a long time, we assumed that libxml2 is necessary for parallels
block format support (block/parallels*). However, this format actually
does not use libxml [*]. Since this is the only user of libxml2 in
whole QEMU tree, we can drop all libxml2 checks and dependencies too.
It is even more: --enable-parallels configure option was the only
option which was silently ignored when it's (fake) dependency
(libxml2) isn't installed.
Drop all mentions of libxml2.
[*] Actually the basis for libxml use were introduced in commit
ed279a06c5 ("configure: add dependency") but the implementation
was never merged:
https://lore.kernel.org/qemu-devel/70227bbd-a517-70e9-714f-e6e0ec431be9@openvz.org/
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220119090423.149315-1-mjt@msgid.tls.msk.ru>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Updated description and adapted to use lcitool]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-5-f4bug@amsat.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220204204335.1689602-9-alex.bennee@linaro.org>
librbd had a bug until early 2022 that affected all versions of ceph that
supported fast-diff. This bug results in reporting of incorrect offsets
if the offset parameter to rbd_diff_iterate2 is not object aligned.
This patch works around this bug for pre Quincy versions of librbd.
Fixes: 0347a8fd4c
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20220113144426.4036493-3-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the assumption that we can't hit a hole if we do not diff against a snapshot was wrong.
We can see a hole in an image if we diff against base if there exists an older snapshot
of the image and we have discarded blocks in the image where the snapshot has data.
Fix this by simply handling a hole like an unallocated area. There are no callbacks
for unallocated areas so just bail out if we hit a hole.
Fixes: 0347a8fd4c
Suggested-by: Ilya Dryomov <idryomov@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20220113144426.4036493-2-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When building on FreeBSD we get:
[816/6851] Compiling C object libblockdev.fa.p/block_export_fuse.c.o
../block/export/fuse.c:628:16: error: use of undeclared identifier 'FALLOC_FL_KEEP_SIZE'
if (mode & FALLOC_FL_KEEP_SIZE) {
^
../block/export/fuse.c:651:16: error: use of undeclared identifier 'FALLOC_FL_PUNCH_HOLE'
if (mode & FALLOC_FL_PUNCH_HOLE) {
^
../block/export/fuse.c:652:22: error: use of undeclared identifier 'FALLOC_FL_KEEP_SIZE'
if (!(mode & FALLOC_FL_KEEP_SIZE)) {
^
3 errors generated.
FAILED: libblockdev.fa.p/block_export_fuse.c.o
Meson indeed reported FALLOC_FL_PUNCH_HOLE is not available:
C compiler for the host machine: cc (clang 10.0.1 "FreeBSD clang version 10.0.1")
Checking for function "fallocate" : NO
Checking for function "posix_fallocate" : YES
Header <linux/falloc.h> has symbol "FALLOC_FL_PUNCH_HOLE" : NO
Header <linux/falloc.h> has symbol "FALLOC_FL_ZERO_RANGE" : NO
...
Similarly to commit 304332039 ("block/export/fuse.c: fix musl build"),
guard the code requiring FALLOC_FL_KEEP_SIZE / FALLOC_FL_PUNCH_HOLE
definitions under CONFIG_FALLOCATE_PUNCH_HOLE #ifdef'ry.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201112655.344373-3-f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to safely maintain a mixture of #ifdef'ry with if-else-if
ladder, rearrange the last statement (!mode) first. Since it is
mutually exclusive with the other conditions, checking it first
doesn't make any logical difference, but allows to add #ifdef'ry
around in a more cleanly way.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201112655.344373-2-f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vhost-user-blk export runs requests asynchronously in their own
coroutine. When the vhost connection goes away and we want to stop the
vhost-user server, we need to wait for these coroutines to stop before
we can unmap the shared memory. Otherwise, they would still access the
unmapped memory and crash.
This introduces a refcount to VuServer which is increased when spawning
a new request coroutine and decreased before the coroutine exits. The
memory is only unmapped when the refcount reaches zero.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220125151435.48792-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After migration, the permissions the guest device wants to impose on its
BlockBackend are stored in blk->perm and blk->shared_perm. In
blk_root_activate(), we take our permissions, but keep all shared
permissions open by calling `blk_set_perm(blk->perm, BLK_PERM_ALL)`.
Only afterwards (immediately or later, depending on the runstate) do we
restrict the shared permissions by calling
`blk_set_perm(blk->perm, blk->shared_perm)`. Unfortunately, our first
call with shared_perm=BLK_PERM_ALL has overwritten blk->shared_perm to
be BLK_PERM_ALL, so this is a no-op and the set of shared permissions is
not restricted.
Fix this bug by saving the set of shared permissions before invoking
blk_set_perm() with BLK_PERM_ALL and restoring it afterwards.
Fixes: 5f7772c4d0
("block-backend: Defer shared_perm tightening migration
completion")
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211125135317.186576-2-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Peng Liang <liangpeng10@huawei.com>
If image doesn't have any compressed cluster we can easily switch to
zlib compression, which may allow to downgrade the image.
That's mostly needed to support IMGOPTS='compression_type=zstd' in some
iotests which do qcow2 downgrade.
While being here also fix checkpatch complain against '#' in printf
formatting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We update the block-status cache whenever we get new information from a
bdrv_co_block_status() call to the block driver. However, if we have
passed want_zero=false to that call, it may flag areas containing zeroes
as data, and so we would update the block-status cache with wrong
information.
Therefore, we should not update the cache with want_zero=false.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: 0bc329fbb0 ("block: block-status cache for data regions")
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.
Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.
Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.
The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.
One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The calculation in sector2cluster() is done relative to the offset of
the root directory. Any writes to blocks before the start of the root
directory (in particular, writes to the FAT) result in negative values,
which are not handled correctly in vvfat_write().
This changes sector2cluster() to return a signed value, and makes sure
that vvfat_write() doesn't try to find mappings for negative cluster
number. It clarifies the code in vvfat_write() to make it more obvious
that the cluster numbers can be negative.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211209152231.23756-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size of the qcow size was calculated so that only the FAT partition
would fit on it, but not the whole disk. However, offsets relative to
the whole disk are used to access it, so increase its size to be large
enough for that.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211209151815.23495-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BlockBackend root child can change when aio_poll() is invoked. This
happens when a temporary filter node is removed upon blockjob
completion, for example.
Functions in block/block-backend.c must be aware of this when using a
blk_bs() pointer across aio_poll() because the BlockDriverState refcnt
may reach 0, resulting in a stale pointer.
One example is scsi_device_purge_requests(), which calls blk_drain() to
wait for in-flight requests to cancel. If the backup blockjob is active,
then the BlockBackend root child is a temporary filter BDS owned by the
blockjob. The blockjob can complete during bdrv_drained_begin() and the
last reference to the BDS is released when the temporary filter node is
removed. This results in a use-after-free when blk_drain() calls
bdrv_drained_end(bs) on the dangling pointer.
Explicitly hold a reference to bs across block APIs that invoke
aio_poll().
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2021778
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2036178
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220111153613.25453-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_def is only a particular use case of
qemu_opts_parse_noisily, so it can be inlined.
Also remove drive_mark_claimed_by_board, as it is only defined
but not implemented (nor used) anywhere.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211215121140.456939-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The handling for the XFS_IOC_DIOINFO ioctl is currently quite excessive:
This is not a "real" feature like the other features that we provide with
the "--enable-xxx" and "--disable-xxx" switches for the configure script,
since this does not influence lots of code (it's only about one call to
xfsctl() in file-posix.c), so people don't gain much with the ability to
disable this with "--disable-xfsctl".
It's also unfortunate that the ioctl will be disabled on Linux in case
the user did not install the right xfsprogs-devel package before running
configure. Thus let's simplify this by providing the ioctl definition
on our own, so we can completely get rid of the header dependency and
thus the related code in the configure script.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215125824.250091-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's unused now (except for permission handling)[*]. The only reasonable
user of it was block-stream job, recently updated to use own blk. And
other block jobs prefer to use own source node related objects.
So, the arguments of dropping the field are:
- block jobs prefer not to use it
- block jobs usually has more then one node to operate on, and better
to operate symmetrically (for example has both source and target
blk's in specific block-job state structure)
*: BlockJob.blk is used to keep some permissions. We simply move
permissions to block-job child created in block_job_create() together
with blk.
In mirror, we just should not care anymore about restoring state of
blk. Most probably this code could be dropped long ago, after dropping
bs->job pointer. Now it finally goes away together with BlockJob.blk
itself.
iotest 141 output is updated, as "bdrv_has_blk(bs)" check in
qmp_blockdev_del() doesn't fail (we don't have blk now). Still, new
error message looks even better.
In iotest 283 we need to add a job id, otherwise "Invalid job ID"
happens now earlier than permission check (as permissions moved from
blk to block-job node).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
block-stream is the only block-job, that reasonably use BlockJob.blk.
We are going to drop BlockJob.blk soon. So, let block-stream have own
blk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
It is useful when start of vm and start of nbd server are not
simple to sync.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the request free list is exhausted the coroutine waits on
q->free_req_queue for the next free request. Whenever a request is
completed a BH is scheduled to invoke nvme_free_req_queue_cb() and wake
up waiting coroutines.
1. nvme_get_free_req() waits for a free request:
while (q->free_req_head == -1) {
...
trace_nvme_free_req_queue_wait(q->s, q->index);
qemu_co_queue_wait(&q->free_req_queue, &q->lock);
...
}
2. nvme_free_req_queue_cb() wakes up the coroutine:
while (qemu_co_enter_next(&q->free_req_queue, &q->lock)) {
^--- infinite loop when free_req_head == -1
}
nvme_free_req_queue_cb() and the coroutine form an infinite loop when
q->free_req_head == -1. Fix this by checking q->free_req_head in
nvme_free_req_queue_cb(). If the free request list is exhausted, don't
wake waiting coroutines. Eventually an in-flight request will complete
and the BH will be scheduled again, guaranteeing forward progress.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211208152246.244585-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Function vvfat_open called function enable_write_target and init_directories,
and these functions malloc new memory for BDRVVVFATState::qcow_filename,
BDRVVVFATState::used_clusters, and BDRVVVFATState::cluster_buff.
When the specified folder does not exist ,it may contains memory leak.
After init_directories function is executed, the vvfat_open return -EIO,
and bdrv_open_driver goto label open_failed,
the program use g_free(bs->opaque) to release BDRVVVFATState struct
without members mentioned.
command line:
qemu-system-x86_64 -hdb <vdisk qcow file> -usb -device usb-storage,drive=fat16
-drive file=fat:rw:fat-type=16:"<path of a host folder does not exist>",
id=fat16,format=raw,if=none
enable_write_target called:
(gdb) bt
at ../block/vvfat.c:3114
flags=155650, errp=0x7fffffffd780) at ../block/vvfat.c:1236
node_name=0x0, options=0x555556fa45d0, open_flags=155650,
errp=0x7fffffffd890) at ../block.c:1558
errp=0x7fffffffd890) at ../block.c:1852
reference=0x0, options=0x555556fa45d0, flags=40962, parent=0x555556f98cd0,
child_class=0x555556b1d6a0 <child_of_bds>, child_role=19,
errp=0x7fffffffda90) at ../block.c:3779
options=0x555556f9cfc0, bdref_key=0x555556239bb8 "file",
parent=0x555556f98cd0, child_class=0x555556b1d6a0 <child_of_bds>,
child_role=19, allow_none=true, errp=0x7fffffffda90) at ../block.c:3419
reference=0x0, options=0x555556f9cfc0, flags=8194, parent=0x0,
child_class=0x0, child_role=0, errp=0x555556c98c40 <error_fatal>)
at ../block.c:3726
options=0x555556f757b0, flags=0, errp=0x555556c98c40 <error_fatal>)
at ../block.c:3872
options=0x555556f757b0, flags=0, errp=0x555556c98c40 <error_fatal>)
at ../block/block-backend.c:436
bs_opts=0x555556f757b0, errp=0x555556c98c40 <error_fatal>)
at ../blockdev.c:608
errp=0x555556c98c40 <error_fatal>) at ../blockdev.c:992
......
Signed-off-by: Daniella Lee <daniellalee111@gmail.com>
Message-Id: <20211119112553.352222-1-daniellalee111@gmail.com>
[hreitz: Took commit message from v1]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
At the end of a reopen, we already call bdrv_refresh_limits(), which
should update bs->request_alignment according to the new file
descriptor. However, raw_probe_alignment() relies on s->needs_alignment
and just uses 1 if it isn't set. We neglected to update this field, so
starting with cache=writeback and then reopening with cache=none means
that we get an incorrect bs->request_alignment == 1 and unaligned
requests fail instead of being automatically aligned.
Fix this by recalculating s->needs_alignment in raw_refresh_limits()
before calling raw_probe_alignment().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211104113109.56336-1-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211115145409.176785-13-kwolf@redhat.com>
[hreitz: Fix iotest 142 for block sizes greater than 512 by operating on
a file with a size of 1 MB]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211116101431.105252-1-hreitz@redhat.com>
bdrv_cor_filter_drop() modifies the block graph. That means that other
parties can also modify the block graph before it returns. Therefore,
we cannot assume that the result of a graph traversal we did before
remains valid afterwards.
We should thus fetch `base` and `unfiltered_base` afterwards instead of
before.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211111120829.81329-2-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211115145409.176785-2-kwolf@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of duplicating code, extract the common helper to free
a single queue.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006164931.172349-4-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For debugging purpose it is helpful to know the CQ/SQ pointers.
We already have a trace event in nvme_free_queue_pair(), extend
it to report these pointer addresses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006164931.172349-3-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 4d324c0bf6 ("introduce QEMU_AUTO_VFREE") buffers
allocated by qemu_memalign() can automatically freed when using
the QEMU_AUTO_VFREE macro. Use it to simplify a bit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006164931.172349-2-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to e7e588d432, there is a
warning in block/block-backend.c that qiov->size <= INT64_MAX is always
true on machines where size_t is narrower than a uint64_t. In said
commit, we silenced this warning by casting to uint64_t.
The commit introducing this warning here
(a93d81c84a) anticipated it and so tried
to address it the same way. However, it only did so in one of two
places where this comparison occurs, and so we still need to fix up the
other one.
Fixes: a93d81c84a
("block-backend: convert blk_aio_ functions to int64_t bytes
paramter")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211026090745.30800-1-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Between the submission of a request and the unplug, other devices
with larger limits may have been queued new requests without flushing
the batch.
Using the new `dev_max_batch` parameter, laio_io_unplug() can check
if the batch exceeds the device limit to flush the current batch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-4-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new parameter can be used by block devices to limit the
Linux AIO batch size more than the limit set by the AIO context.
file-posix backend supports this, passing its `aio-max-batch` option
previously added.
Add an helper function to calculate the maximum batch size.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-3-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit d7ddd0a161 ("linux-aio: limit the batch size using
`aio-max-batch` parameter") added a way to limit the batch size
of Linux AIO backend for the entire AIO context.
The same AIO context can be shared by multiple devices, so
latency-sensitive devices may want to limit the batch size even
more to avoid increasing latency.
For this reason we add the `aio-max-batch` option to the file
backend, which will be used by the next commits to limit the size of
batches including requests generated by this device.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-2-sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Include linux/falloc.h if CONFIG_FALLOCATE_ZERO_RANGE is defined to fix
50482fda98
and avoid the following build failure on musl:
../block/export/fuse.c: In function 'fuse_fallocate':
../block/export/fuse.c:643:21: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
643 | else if (mode & FALLOC_FL_ZERO_RANGE) {
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/be24433a429fda681fb66698160132c1c99bc53b
Fixes: 50482fda98 ("block/export/fuse.c: fix musl build")
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20211022095209.1319671-1-fontaine.fabrice@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the qemu rbd driver currently lacks support for bdrv_co_block_status.
This results mainly in incorrect progress during block operations (e.g.
qemu-img convert with an rbd image as source).
This patch utilizes the rbd_diff_iterate2 call from librbd to detect
allocated and unallocated (all zero areas).
To avoid querying the ceph OSDs for the answer this is only done if
the image has the fast-diff feature which depends on the object-map and
exclusive-lock features. In this case it is guaranteed that the information
is present in memory in the librbd client and thus very fast.
If fast-diff is not available all areas are reported to be allocated
which is the current behaviour if bdrv_co_block_status is not implemented.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20211012152231.24868-1-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AIO discards regressed as a result of the following commit:
0dfc7af2 block/file-posix: Optimize for macOS
When trying to run blkdiscard within a Linux guest, the request would
fail, with some errors in dmesg:
---- [ snip ] ----
[ 4.010070] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 4.011061] sd 2:0:0:0: [sda] tag#0 Sense Key : Aborted Command
[current]
[ 4.011061] sd 2:0:0:0: [sda] tag#0 Add. Sense: I/O process
terminated
[ 4.011061] sd 2:0:0:0: [sda] tag#0 CDB: Unmap/Read sub-channel 42
00 00 00 00 00 00 00 18 00
[ 4.011061] blk_update_request: I/O error, dev sda, sector 0
---- [ snip ] ----
This turns out to be a result of a flaw in changes to the error value
translation logic in handle_aiocb_discard(). The default return value
may be left untranslated in some configurations, and the wrong variable
is used in one translation.
Fix both issues.
Fixes: 0dfc7af2b2 ("block/file-posix: Optimize for macOS")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Emil Karlson <jkarlson@tuxera.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211019110954.4170931-1-ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code in vpc.c uses BDRVVPCState->footer.type in various places
to decide whether the image is a fixed-size (VHD_FIXED) or a dynamic
(VHD_DYNAMIC) image. However, we never check that this field really
contains VHD_FIXED if we detected a fixed size image in vpc_open(),
so a wrong value here could cause quite some trouble during runtime.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211012082702.792259-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
VMDK files support an attribute that represents the version of the guest
tools that are installed on the disk.
This attribute is used by vSphere before a machine has been started to
determine if the VM has the guest tools installed.
This is important when configuring "Operating system customizations" in
vSphere, as it checks for the presence of the guest tools before
allowing those customizations.
Thus when the VM has not yet booted normally it would be impossible to
customize it, therefore preventing a customized first-boot.
The attribute should not hurt on disks that do not have the guest tools
installed and indeed the VMware tools also unconditionally add this
attribute.
(Defaulting to the value "2147483647", as is done in this patch)
Signed-off-by: Thomas Weißschuh <thomas.weissschuh.ext@zeiss.com>
Message-Id: <20210913130419.13241-1-thomas.weissschuh.ext@zeiss.com>
[hreitz: Added missing '#' in block-core.json]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
blk_check_bytes_request is called from blk_co_do_preadv,
blk_co_do_pwritev_part, blk_co_do_pdiscard and blk_co_copy_range
before (maybe) calling throttle_group_co_io_limits_intercept() (which
has int64_t argument) and then calling corresponding bdrv_co_ function.
bdrv_co_ functions are OK with int64_t bytes as well.
So dropping the check for INT_MAX we just get same restrictions as in
bdrv_ layer: discard and write-zeroes goes through
bdrv_check_qiov_request() and are allowed to be 64bit. Other requests
go through bdrv_check_request32() and still restricted by INT_MAX
boundary.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To be consistent with declarations in include/sysemu/block-backend.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
1. Convert bytes in BlkAioEmAIOCB:
aio->bytes is only passed to already int64_t interfaces, and set in
blk_aio_prwv, which is updated here.
2. For all updated functions the parameter type becomes wider so callers
are safe.
3. In blk_aio_prwv we only store bytes to BlkAioEmAIOCB, which is
updated here.
4. Other updated functions are wrappers on blk_aio_prwv.
Note that blk_aio_preadv and blk_aio_pwritev become safer: before this
commit, it's theoretically possible to pass qiov with size exceeding
INT_MAX, which than converted to int argument of blk_aio_prwv. Now it's
converted to int64_t which is a lot better. Still add assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion and grammar]
Signed-off-by: Eric Blake <eblake@redhat.com>
Function is updated so that parameter type becomes wider, so all
callers should be OK with it.
Look at blk_co_copy_range() itself: bytes is passed only to
blk_check_byte_request() and bdrv_co_copy_range(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert blk_pdiscard, blk_pwrite_compressed, blk_pwrite_zeroes.
These are just wrappers for functions with int64_t argument, so allow
passing int64_t as well. Parameter type becomes wider so all callers
should be OK with it.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Note also that we don't (and are not going to) convert blk_pwrite and
blk_pread: these functions return number of bytes on success, so to
update them, we should change return type to int64_t as well, which
will lead to investigating and updating all callers which is too much.
So, blk_pread and blk_pwrite remain unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's drop hand-made coroutine wrappers and use coroutine wrapper
generation like in block/io.c.
Now, blk_foo() functions are written in same way as blk_co_foo() ones,
but wrap blk_do_foo() instead of blk_co_do_foo().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a preparation to the following commit, to use automatic
coroutine wrapper generation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We updated blk_do_pdiscard() and its wrapper blk_co_pdiscard(). Both
functions are updated so that the parameter type becomes wider, so all
callers should be OK with it.
Look at blk_do_pdiscard(): bytes is passed only to
blk_check_byte_request() and bdrv_co_pdiscard(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().
All functions are converted so that the parameter type becomes wider, so
all callers should be OK with it.
Look at blk_do_pwritev_part() body:
bytes is passed to:
- trace_blk_co_pwritev (we update it here)
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_pwritev_part - all already have int64_t argument.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.
blk_co_preadv() only passes its arguments to blk_do_preadv().
blk_do_preadv() passes bytes to:
- trace_blk_co_preadv, which is updated too
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_preadv, which are already int64_t.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename size and make it int64_t to correspond to modern block layer,
which always uses int64_t for offset and bytes (not in blk layer yet,
which is a task for following commits).
All callers pass int or unsigned int.
So, for bytes in [0, INT_MAX] nothing is changed, for negative bytes we
now fail on "bytes < 0" check instead of "bytes > INT_MAX" check.
Note, that blk_check_byte_request() still doesn't allow requests
exceeding INT_MAX.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With -m32, size_t is generally only a uint32_t. That makes clang
complain that in the assertion
assert(qiov->size <= INT64_MAX);
the range of the type of qiov->size (size_t) is too small for any of its
values to ever exceed INT64_MAX.
Cast qiov->size to uint64_t to silence clang.
Fixes: f7ef38dd13
("block: use int64_t instead of uint64_t in driver read
handlers")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211011155031.149158-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
v2: add small fix by Stefano, Hanna's series fixed
-----BEGIN PGP SIGNATURE-----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=TVTu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-10-07-v2' into staging
mirror: Handle errors after READY cancel
v2: add small fix by Stefano, Hanna's series fixed
# gpg: Signature made Thu 07 Oct 2021 08:25:07 AM PDT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-jobs-2021-10-07-v2:
iotests: Add mirror-ready-cancel-error test
mirror: Do not clear .cancelled
mirror: Stop active mirroring after force-cancel
mirror: Check job_is_cancelled() earlier
mirror: Use job_is_cancelled()
job: Add job_cancel_requested()
job: Do not soft-cancel after a job is done
jobs: Give Job.force_cancel more meaning
job: @force parameter for job_cancel_sync()
job: Force-cancel jobs in a failed transaction
mirror: Drop s->synced
mirror: Keep s->synced on error
job: Context changes in job_completed_txn_abort()
block/aio_task: assert `max_busy_tasks` is greater than 0
block/backup: avoid integer overflow of `max-workers`
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Clearing .cancelled before leaving the main loop when the job has been
soft-cancelled is no longer necessary since job_is_cancelled() only
returns true for jobs that have been force-cancelled.
Therefore, this only makes a differences in places that call
job_cancel_requested(). In block/mirror.c, this is done only before
.cancelled was cleared.
In job.c, there are two callers:
- job_completed_txn_abort() asserts that .cancelled is true, so keeping
it true will not affect this place.
- job_complete() refuses to let a job complete that has .cancelled set.
It is correct to refuse to let the user invoke job-complete on mirror
jobs that have already been soft-cancelled.
With this change, there are no places that reset .cancelled to false and
so we can be sure that .force_cancel can only be true if .cancelled is
true as well. Assert this in job_is_cancelled().
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-13-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Once the mirror job is force-cancelled (job_is_cancelled() is true), we
should not generate new I/O requests. This applies to active mirroring,
too, so stop it once the job is cancelled.
(We must still forward all I/O requests to the source, though, of
course, but those are not really I/O requests generated by the job, so
this is fine.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-12-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We must check whether the job is force-cancelled early in our main loop,
most importantly before any `continue` statement. For example, we used
to have `continue`s before our current checking location that are
triggered by `mirror_flush()` failing. So, if `mirror_flush()` kept
failing, force-cancelling the job would not terminate it.
Jobs can be cancelled while they yield, and once they are
(force-cancelled), they should not generate new I/O requests.
Therefore, we should put the check after the last yield before
mirror_iteration() is invoked.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-11-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
mirror_drained_poll() returns true whenever the job is cancelled,
because "we [can] be sure that it won't issue more requests". However,
this is only true for force-cancelled jobs, so use job_is_cancelled().
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-10-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Most callers of job_is_cancelled() actually want to know whether the job
is on its way to immediate termination. For example, we refuse to pause
jobs that are cancelled; but this only makes sense for jobs that are
really actually cancelled.
A mirror job that is cancelled during READY with force=false should
absolutely be allowed to pause. This "cancellation" (which is actually
a kind of completion) may take an indefinite amount of time, and so
should behave like any job during normal operation. For example, with
on-target-error=stop, the job should stop on write errors. (In
contrast, force-cancelled jobs should not get write errors, as they
should just terminate and not do further I/O.)
Therefore, redefine job_is_cancelled() to only return true for jobs that
are force-cancelled (which as of HEAD^ means any job that interprets the
cancellation request as a request for immediate termination), and add
job_cancel_requested() as the general variant, which returns true for
any jobs which have been requested to be cancelled, whether it be
immediately or after an arbitrarily long completion phase.
Finally, here is a justification for how different job_is_cancelled()
invocations are treated by this patch:
- block/mirror.c (mirror_run()):
- The first invocation is a while loop that should loop until the job
has been cancelled or scheduled for completion. What kind of cancel
does not matter, only the fact that the job is supposed to end.
- The second invocation wants to know whether the job has been
soft-cancelled. Calling job_cancel_requested() is a bit too broad,
but if the job were force-cancelled, we should leave the main loop
as soon as possible anyway, so this should not matter here.
- The last two invocations already check force_cancel, so they should
continue to use job_is_cancelled().
- block/backup.c, block/commit.c, block/stream.c, anything in tests/:
These jobs know only force-cancel, so there is no difference between
job_is_cancelled() and job_cancel_requested(). We can continue using
job_is_cancelled().
- job.c:
- job_pause_point(), job_yield(), job_sleep_ns(): Only force-cancelled
jobs should be prevented from being paused. Continue using job_is_cancelled().
- job_update_rc(), job_finalize_single(), job_finish_sync(): These
functions are all called after the job has left its main loop. The
mirror job (the only job that can be soft-cancelled) will clear
.cancelled before leaving the main loop if it has been
soft-cancelled. Therefore, these functions will observe .cancelled
to be true only if the job has been force-cancelled. We can
continue to use job_is_cancelled().
(Furthermore, conceptually, a soft-cancelled mirror job should not
report to have been cancelled. It should report completion (see
also the block-job-cancel QAPI documentation). Therefore, it makes
sense for these functions not to distinguish between a
soft-cancelled mirror job and a job that has completed as normal.)
- job_completed_txn_abort(): All jobs other than @job have been
force-cancelled. job_is_cancelled() must be true for them.
Regarding @job itself: job_completed_txn_abort() is mostly called
when the job's return value is not 0. A soft-cancelled mirror has a
return value of 0, and so will not end up here then.
However, job_cancel() invokes job_completed_txn_abort() if the job
has been deferred to the main loop, which is mostly the case for
completed jobs (which skip the assertion), but not for sure.
To be safe, use job_cancel_requested() in this assertion.
- job_complete(): This is function eventually invoked by the user
(through qmp_block_job_complete() or qmp_job_complete(), or
job_complete_sync(), which comes from qemu-img). The intention here
is to prevent a user from invoking job-complete after the job has
been cancelled. This should also apply to soft cancelling: After a
mirror job has been soft-cancelled, the user should not be able to
decide otherwise and have it complete as normal (i.e. pivoting to
the target).
- job_cancel(): Both functions are equivalent (see comment there), but
we want to use job_is_cancelled(), because this shows that we call
job_completed_txn_abort() only for force-cancelled jobs. (As
explained for job_update_rc(), soft-cancelled jobs should be treated
as if they have completed as normal.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-9-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We largely have two cancel modes for jobs:
First, there is actual cancelling. The job is terminated as soon as
possible, without trying to reach a consistent result.
Second, we have mirror in the READY state. Technically, the job is not
really cancelled, but it just is a different completion mode. The job
can still run for an indefinite amount of time while it tries to reach a
consistent result.
We want to be able to clearly distinguish which cancel mode a job is in
(when it has been cancelled). We can use Job.force_cancel for this, but
right now it only reflects cancel requests from the user with
force=true, but clearly, jobs that do not even distinguish between
force=false and force=true are effectively always force-cancelled.
So this patch has Job.force_cancel signify whether the job will
terminate as soon as possible (force_cancel=true) or whether it will
effectively remain running despite being "cancelled"
(force_cancel=false).
To this end, we let jobs that provide JobDriver.cancel() tell the
generic job code whether they will terminate as soon as possible or not,
and for jobs that do not provide that method we assume they will.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-7-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Callers should be able to specify whether they want job_cancel_sync() to
force-cancel the job or not.
In fact, almost all invocations do not care about consistency of the
result and just want the job to terminate as soon as possible, so they
should pass force=true. The replication block driver is the exception,
specifically the active commit job it runs.
As for job_cancel_sync_all(), all callers want it to force-cancel all
jobs, because that is the point of it: To cancel all remaining jobs as
quickly as possible (generally on process termination). So make it
invoke job_cancel_sync() with force=true.
This changes some iotest outputs, because quitting qemu while a mirror
job is active will now lead to it being cancelled instead of completed,
which is what we want. (Cancelling a READY mirror job with force=false
may take an indefinite amount of time, which we do not want when
quitting. If users want consistent results, they must have all jobs be
done before they quit qemu.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-6-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
As of HEAD^, there is no meaning to s->synced other than whether the job
is READY or not. job_is_ready() gives us that information, too.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-4-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
An error does not take us out of the READY phase, which is what
s->synced signifies. It does of course mean that source and target are
no longer in sync, but that is what s->actively_sync is for -- s->synced
never meant that source and target are in sync, only that they were at
some point (and at that point we transitioned into the READY phase).
The tangible problem is that we transition to READY once we are in sync
and s->synced is false. By resetting s->synced here, we will transition
from READY to READY once the error is resolved (if the job keeps
running), and that transition is not allowed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211006151940.214590-3-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All code in block/aio_task.c expects `max_busy_tasks` to always
be greater than 0.
Assert this condition during the AioTaskPool creation where
`max_busy_tasks` is set.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211005161157.282396-3-sgarzare@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
QAPI generates `struct BackupPerf` where `max-workers` value is stored
in an `int64_t` variable.
But block_copy_async(), and the underlying code, uses an `int` parameter.
At the end that variable is used to initialize `max_busy_tasks` in
block/aio_task.c causing the following assertion failure if a value
greater than INT_MAX(2147483647) is used:
../block/aio_task.c:63: aio_task_pool_wait_one: Assertion `pool->busy_tasks > 0' failed.
Let's check that `max-workers` doesn't exceed INT_MAX and print an
error in that case.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2009310
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211005161157.282396-2-sgarzare@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
If we don't have active request, that waiting for this handle to be
received, we should report an error.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902103805.25686-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
OK, that's a big rewrite of the logic.
Pre-patch we have an always running coroutine - connection_co. It does
reply receiving and reconnecting. And it leads to a lot of difficult
and unobvious code around drained sections and context switch. We also
abuse bs->in_flight counter which is increased for connection_co and
temporary decreased in points where we want to allow drained section to
begin. One of these place is in another file: in nbd_read_eof() in
nbd/client.c.
We also cancel reconnect and requests waiting for reconnect on drained
begin which is not correct. And this patch fixes that.
Let's finally drop this always running coroutine and go another way:
do both reconnect and receiving in request coroutines.
The detailed list of changes below (in the sequence of diff hunks).
1. receiving coroutines are woken directly from nbd_channel_error, when
we change s->state
2. nbd_co_establish_connection_cancel(): we don't have drain_begin now,
and in nbd_teardown_connection() all requests should already be
finished (and reconnect is done from request). So
nbd_co_establish_connection_cancel() is called from
nbd_cancel_in_flight() (to cancel the request that is doing
nbd_co_establish_connection()) and from reconnect_delay_timer_cb()
(previously we didn't need it, as reconnect delay only should cancel
active requests not the reconnection itself). But now reconnection
itself is done in the separate thread (we now call
nbd_client_connection_enable_retry() in nbd_open()), and we need to
cancel the requests that wait in nbd_co_establish_connection()
now).
2A. We do receive headers in request coroutine. But we also should
dispatch replies for other pending requests. So,
nbd_connection_entry() is turned into nbd_receive_replies(), which
does reply dispatching while it receives other request headers, and
returns when it receives the requested header.
3. All old staff around drained sections and context switch is dropped.
In details:
- we don't need to move connection_co to new aio context, as we
don't have connection_co anymore
- we don't have a fake "request" of connection_co (extra increasing
in_flight), so don't care with it in drain_begin/end
- we don't stop reconnection during drained section anymore. This
means that drain_begin may wait for a long time (up to
reconnect_delay). But that's an improvement and more correct
behavior see below[*]
4. In nbd_teardown_connection() we don't have to wait for
connection_co, as it is dropped. And cleanup for s->ioc and nbd_yank
is moved here from removed connection_co.
5. In nbd_co_do_establish_connection() we now should handle
NBD_CLIENT_CONNECTING_NOWAIT: if new request comes when we are in
NBD_CLIENT_CONNECTING_NOWAIT, it still should call
nbd_co_establish_connection() (who knows, maybe the connection was
already established by another thread in the background). But we
shouldn't wait: if nbd_co_establish_connection() can't return new
channel immediately the request should fail (we are in
NBD_CLIENT_CONNECTING_NOWAIT state).
6. nbd_reconnect_attempt() is simplified: it's now easier to wait for
other requests in the caller, so here we just assert that fact.
Also delay time is now initialized here: we can easily detect first
attempt and start a timer.
7. nbd_co_reconnect_loop() is dropped, we don't need it. Reconnect
retries are fully handle by thread (nbd/client-connection.c), delay
timer we initialize in nbd_reconnect_attempt(), we don't have to
bother with s->drained and friends. nbd_reconnect_attempt() now
called from nbd_co_send_request().
8. nbd_connection_entry is dropped: reconnect is now handled by
nbd_co_send_request(), receiving reply is now handled by
nbd_receive_replies(): all handled from request coroutines.
9. So, welcome new nbd_receive_replies() called from request coroutine,
that receives reply header instead of nbd_connection_entry().
Like with sending requests, only one coroutine may receive in a
moment. So we introduce receive_mutex, which is locked around
nbd_receive_reply(). It also protects some related fields. Still,
full audit of thread-safety in nbd driver is a separate task.
New function waits for a reply with specified handle being received
and works rather simple:
Under mutex:
- if current handle is 0, do receive by hand. If another handle
received - switch to other request coroutine, release mutex and
yield. Otherwise return success
- if current handle == requested handle, we are done
- otherwise, release mutex and yield
10: in nbd_co_send_request() we now do nbd_reconnect_attempt() if
needed. Also waiting in free_sema queue we now wait for one of two
conditions:
- connectED, in_flight < MAX_NBD_REQUESTS (so we can start new one)
- connectING, in_flight == 0, so we can call
nbd_reconnect_attempt()
And this logic is protected by s->send_mutex
Also, on failure we don't have to care of removed s->connection_co
11. nbd_co_do_receive_one_chunk(): now instead of yield() and wait for
s->connection_co we just call new nbd_receive_replies().
12. nbd_co_receive_one_chunk(): place where s->reply.handle becomes 0,
which means that handling of the whole reply is finished. Here we
need to wake one of coroutines sleeping in nbd_receive_replies().
If none are sleeping - do nothing. That's another behavior change: we
don't have endless recv() in the idle time. It may be considered as
a drawback. If so, it may be fixed later.
13. nbd_reply_chunk_iter_receive(): don't care about removed
connection_co, just ping in_flight waiters.
14. Don't create connection_co, enable retry in the connection thread
(we don't have own reconnect loop anymore)
15. We now need to add a nbd_co_establish_connection_cancel() call in
nbd_cancel_in_flight(), to cancel the request that is doing a
connection attempt.
[*], ok, now we don't cancel reconnect on drain begin. That's correct:
reconnect feature leads to possibility of long-running requests (up
to reconnect delay). Still, drain begin is not a reason to kill
long requests. We should wait for them.
This also means, that we can again reproduce a dead-lock, described
in 8c517de24a.
Why we are OK with it:
1. Now this is not absolutely-dead dead-lock: the vm is unfrozen
after reconnect delay. Actually 8c517de24a fixed a bug in
NBD logic, that was not described in 8c517de24a and led to
forever dead-lock. The problem was that nobody woke the free_sema
queue, but drain_begin can't finish until there is a request in
free_sema queue. Now we have a reconnect delay timer that works
well.
2. It's not a problem of the NBD driver, but of the ide code,
because it does drain_begin under the global mutex; the problem
doesn't reproduce when using scsi instead of ide.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902103805.25686-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar and comment tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Split out nbd_recv_coroutine_wake_one(), as it will be used
separately.
Rename the function and add a possibility to wake only first found
sleeping coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902103805.25686-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to use it in nbd_channel_error(), so move it up. Note,
that we are going also refactor and rename
nbd_recv_coroutines_wake_all() in future anyway, so keeping it where it
is and making forward declaration doesn't make real sense.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210902103805.25686-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Don't rely on connection being totally broken in case of -EIO. Safer
and more correct is to just shut down the channel anyway, since we
change the state and plan on reconnecting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210902103805.25686-2-vsementsov@virtuozzo.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all drivers are updated by the previous commit, we can drop
the last limiter on pdiscard path: INT_MAX in bdrv_co_pdiscard().
Now everything is prepared for implementing incredibly cool and fast
big-discard requests in NBD and qcow2. And any other driver which wants
it of course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver discard handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.
Let's look at all updated functions:
blkdebug: all calculations are still OK, thanks to
bdrv_check_qiov_request().
both rule_check and bdrv_co_pdiscard are 64bit
blklogwrites: pass to blk_loc_writes_co_log which is 64bit
blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK
copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
cbw_do_copy_before_write which is 64bit
file-posix: one handler calls raw_account_discard() is 64bit and both
handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
raw_account_discard())
gluster: somehow, third argument of glfs_discard_async is size_t.
Let's set max_pdiscard accordingly.
iscsi: iscsi_allocmap_set_invalid is 64bit,
!is_byte_request_lun_aligned is 64bit.
list.num is uint32_t. Let's clarify max_pdiscard and
pdiscard_alignment.
mirror_top: pass to bdrv_mirror_top_do_write() which is
64bit
nbd: protocol limitation. max_pdiscard is alredy set strict enough,
keep it as is for now.
nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
to nvme_refresh_limits().
preallocate: pass to bdrv_co_pdiscard() which is 64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
qcow2_cluster_discard() is 64bit.
raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.
throttle: pass to bdrv_co_pdiscard() which is 64bit and to
throttle_group_co_io_limits_intercept() which is 64bit as well.
test-block-iothread: bytes argument is unused
Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to support 64 bit discard requests. Now update the
limit variable. It's absolutely safe. The variable is set in some
drivers, and used in bdrv_co_pdiscard().
Update also max_pdiscard variable in bdrv_co_pdiscard(), so that
bdrv_co_pdiscard() is now prepared for 64bit requests. The remaining
logic including num, offset and bytes variables is already
supporting 64bit requests.
So the only thing that prevents 64 bit requests is limiting
max_pdiscard variable to INT_MAX in bdrv_co_pdiscard().
We'll drop this limitation after updating all block drivers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all drivers are updated by previous commit, we can drop two
last limiters on write-zeroes path: INT_MAX in
bdrv_co_do_pwrite_zeroes() and bdrv_check_request32() in
bdrv_co_pwritev_part().
Now everything is prepared for implementing incredibly cool and fast
big-write-zeroes in NBD and qcow2. And any other driver which wants it
of course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write_zeroes handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_do_pwrite_zeroes().
bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of
callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s
max_write_zeroes is limited to INT_MAX. So, updated functions all are
safe, they will not get "bytes" larger than before.
Still, let's look through all updated functions, and add assertions to
the ones which are actually unprepared to values larger than INT_MAX.
For these drivers also set explicit max_pwrite_zeroes limit.
Let's go:
blkdebug: calculations can't overflow, thanks to
bdrv_check_qiov_request() in generic layer. rule_check() and
bdrv_co_pwrite_zeroes() both have 64bit argument.
blklogwrites: pass to blk_log_writes_co_log() with 64bit argument.
blkreplay, copy-on-read, filter-compress: pass to
bdrv_co_pwrite_zeroes() which is OK
copy-before-write: Calls cbw_do_copy_before_write() and
bdrv_co_pwrite_zeroes, both have 64bit argument.
file-posix: both handler calls raw_do_pwrite_zeroes, which is updated.
In raw_do_pwrite_zeroes() calculations are OK due to
bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes
which is uint64_t.
Check also where that uint64_t gets handed:
handle_aiocb_write_zeroes_block() passes a uint64_t[2] to
ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate()
which takes off_t (and we compile to always have 64-bit off_t), as
does handle_aiocb_write_zeroes_unmap. All look safe.
gluster: bytes go to GlusterAIOCB::size which is int64_t and to
glfs_zerofill_async works with off_t.
iscsi: Aha, here we deal with iscsi_writesame16_task() that has
uint32_t num_blocks argument and iscsi_writesame16_task() has
uint16_t argument. Make comments, add assertions and clarify
max_pwrite_zeroes calculation.
iscsi_allocmap_() functions already has int64_t argument
is_byte_request_lun_aligned is simple to update, do it.
mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t
argument
nbd: Aha, here we have protocol limitation, and NBDRequest::len is
uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are
OK for now.
nvme: Again, protocol limitation. And no inherent limit for
write-zeroes at all. But from code that calculates cdw12 it's obvious
that we do have limit and alignment. Let's clarify it. Also,
obviously the code is not prepared to handle bytes=0. Let's handle
this case too.
trace events already 64bit
preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both
64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: offset + bytes and alignment still works good (thanks to
bdrv_check_qiov_request()), so tail calculation is OK
qcow2_subcluster_zeroize() has 64bit argument, should be OK
trace events updated
qed: qed_co_request wants int nb_sectors. Also in code we have size_t
used for request length which may be 32bit. So, let's just keep
INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and
don't care.
raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both
64bit.
throttle: Both throttle_group_co_io_limits_intercept() and
bdrv_co_pwrite_zeroes() are 64bit.
vmdk: pass to vmdk_pwritev which is 64bit
quorum: pass to quorum_co_pwritev() which is 64bit
Hooray!
At this point all block drivers are prepared to support 64bit
write-zero requests, or have explicitly set max_pwrite_zeroes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: use <= rather than < in assertions relying on max_pwrite_zeroes]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to support 64 bit write-zeroes requests. Now update the
limit variable. It's absolutely safe. The variable is set in some
drivers, and used in bdrv_co_do_pwrite_zeroes().
Update also max_write_zeroes variable in bdrv_co_do_pwrite_zeroes(), so
that bdrv_co_do_pwrite_zeroes() is now prepared to 64bit requests. The
remaining logic including num, offset and bytes variables is already
supporting 64bit requests.
So the only thing that prevents 64 bit requests is limiting
max_write_zeroes variable to INT_MAX in bdrv_co_do_pwrite_zeroes().
We'll drop this limitation after updating all block drivers.
Ah, we also have bdrv_check_request32() in bdrv_co_pwritev_part(). It
will be modified to do bdrv_check_request() for write-zeroes path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver copy_range handlers parameters which are already
64bit to signed type.
Now let's consider all callers. Simple
git grep '\->bdrv_co_copy_range'
shows the only caller:
bdrv_co_copy_range_internal(), which does bdrv_check_request32(),
so everything is OK.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_co_copy_range_\(from\|to\)\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows no more callers. So, we are done.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
We modify the request by adding an offset to vmstate. Let's check the
modified request. It will help us to safely move .bdrv_co_preadv_part
and .bdrv_co_pwritev_part to int64_t type of offset and bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Only qcow2 driver supports vmstate.
In qcow2 these requests go through .bdrv_co_p{read,write}v_part
handlers.
So, let's do our basic check for the request on vmstate generic
handlers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Split checking for reserved bits out of aligned offset check.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- use g_autofree for l1_table
- better name for size in bytes variable
- reduce code blocks nesting
- whitespaces, braces, newlines
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Check subcluster bitmap of the l2 entry for different types of
clusters:
- for compressed it must be zero
- for allocated check consistency of two parts of the bitmap
- for unallocated all subclusters should be unallocated
(or zero-plain)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Message-Id: <20210914122454.141075-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll reuse the function to fix wrong L2 entry bitmap. Support it now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split fix_l2_entry_by_zero() out of check_refcounts_l2() to be
reused in further patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add helper to parse compressed l2_entry and use it everywhere instead
of open-coding.
Note, that in most places we move to precise coffset/csize instead of
sector-aligned. Still it should work good enough for updating
refcounts.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Let's pass the whole L2 entry and not bother with
L2E_COMPRESSED_OFFSET_SIZE_MASK.
It also helps further refactoring that adds generic
qcow2_parse_compressed_l2_entry() helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- don't use same name for size in bytes and in entries
- use g_autofree for l2_table
- add whitespace
- fix block comment style
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is no conflict and no dependency if we have parallel writes to
different subclusters of one cluster when the cluster itself is already
allocated. So, relax extra dependency.
Measure performance:
First, prepare build/qemu-img-old and build/qemu-img-new images.
cd scripts/simplebench
./img_bench_templater.py
Paste the following to stdin of running script:
qemu_img=../../build/qemu-img-{old|new}
$qemu_img create -f qcow2 -o extended_l2=on /ssd/x.qcow2 1G
$qemu_img bench -c 100000 -d 8 [-s 2K|-s 2K -o 512|-s $((1024*2+512))] \
-w -t none -n /ssd/x.qcow2
The result:
All results are in seconds
------------------ --------- ---------
old new
-s 2K 6.7 ± 15% 6.2 ± 12%
-7%
-s 2K -o 512 13 ± 3% 11 ± 5%
-16%
-s $((1024*2+512)) 9.5 ± 4% 8.4
-12%
------------------ --------- ---------
So small writes are more independent now and that helps to keep deeper
io queue which improves performance.
271 iotest output becomes racy for three allocation in one cluster.
Second and third writes may finish in different order. Second and
third requests don't depend on each other any more. Still they both
depend on first request anyway. Filter out second and third write
offsets to cover both possible outputs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824101517.59802-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[hreitz: s/ an / and /]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
No logic change, just prepare for the following commit. While being
here do also small grammar fix in a comment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824101517.59802-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In mirror_iteration() we call mirror_wait_on_conflicts() with
`self` parameter set to NULL.
Starting from commit d44dae1a7c we dereference `self` pointer in
mirror_wait_on_conflicts() without checks if it is not NULL.
Backtrace:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
172 self->waiting_for_op = op;
[Current thread is 1 (Thread 0x7f0908931ec0 (LWP 380249))]
(gdb) bt
#0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
at ../block/mirror.c:172
#1 0x00005610c5d9d631 in mirror_run (job=0x5610c76a2c00, errp=<optimized out>) at ../block/mirror.c:491
#2 0x00005610c5d58726 in job_co_entry (opaque=0x5610c76a2c00) at ../job.c:917
#3 0x00005610c5f046c6 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>)
at ../util/coroutine-ucontext.c:173
#4 0x00007f0909975820 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
from /usr/lib64/libc.so.6
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001404
Fixes: d44dae1a7c ("block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210910124533.288318-1-sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
