Most of the existing users would continue around a loop which
would fault the tlb entry in via a normal load/store.
But for AArch64 SVE we have an existing emulation bug wherein we
would mark the first element of a no-fault vector load as faulted
(within the FFR, not via exception) just because we did not have
its address in the TLB. Now we can properly only mark it as faulted
if there really is no valid, readable translation, while still not
raising an exception. (Note that beyond the first element of the
vector, the hardware may report a fault for any reason whatsoever;
with at least one element loaded, forward progress is guaranteed.)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Isolate the computation of an index from an address into a
helper before we change that function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009175129.17888-2-cota@braap.org>
sparc32plus has 64bit long type but only 32bit virtual address space.
For instance, "apt-get upgrade" failed because of a mmap()/msync()
sequence.
mmap() returned 0xff252000 but msync() used g2h(0xffffffffff252000)
to find the host address. The "(target_ulong)" in g2h() doesn't fix the
address because it is 64bit long.
This patch introduces an "abi_ptr" that is set to uint32_t
if the virtual address space is addressed using 32bit in the linux-user
case. It stays set to target_ulong with softmmu case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180814171217.14680-1-laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: added "%" in TARGET_ABI_FMT_ptr "%"PRIx64]
The condition to check whether an address has hit against a particular
TLB entry is not completely trivial. We do this in various places, and
in fact in one place (get_page_addr_code()) we have got the condition
wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline
functions (one for a known-page-aligned address and one for an
arbitrary address), and use them in all the places where we had the
condition correct.
This is a no-behaviour-change patch; we leave fixing the buggy
code in get_page_addr_code() to a subsequent patch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180307215010.30706-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the user emulation code path, tlb_vaddr_to_host erronesously passed
vaddr as the guest address to be translated, instead of addr, the parameter
which actually contained the guest address.
This resulted in incorrect addresses being used when emulating block copy
(mvc/mvpg) and block clear (xc) instructions for the s390x target.
Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Message-Id: <20161113050523.23909-1-koorogi@koorogi.info>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
To avoid to many #ifdef in target code, provide a tlb_vaddr_to_host for
both user and softmmu modes. In the first case the function always
succeed and just call the g2h function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
At 8k per TLB (for 64-bit host or target), 8 or more modes
make the TLBs bigger than 64k, and some RISC TCG backends do
not like that. On the affected hosts, cut the TLB size in
half---there is still a measurable speedup on PPC with the
next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Support guest CPUs which need 7 MMU index values.
Add a comment about what would be required to raise the limit
further (trivial for 8, TCG backend rework for 9 or more).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Not all targets define a full set of suffix strings for the
NB_MMU_MODES that they have. In this situation, don't define any
helper functions for that mode, rather than defining helper functions
with no suffix at all. The MMU mode is still functional; it is merely
not directly accessible via cpu_ld*_MODE from target helper functions.
Also add an "NB_MMU_MODES >= 2" check to the definition of the mode 1
helpers -- some targets only define one MMU mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1421432008-6786-1-git-send-email-peter.maydell@linaro.org
Add documentation of what the cpu_*_* accessors look like.
Correct some minor errors in the existing documentation of the
direct _p accessor family. Remove the near-duplicate comment
on the _p accessors from cpu-all.h and replace it with a reference
to the comment in bswap.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-16-git-send-email-peter.maydell@linaro.org
The _raw macros and their helpers saddr() and laddr() are now
totally unused -- delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-14-git-send-email-peter.maydell@linaro.org
Use inline functions rather than macros for cpu_ld/st accessors
for the *-user configurations, as we already do for softmmu.
This has a two advantages:
* we can actually typecheck our arguments
* we don't need to leak the _raw macros everywhere
Since the _kernel functions were only used by target-i386/seg_helper.c,
put the definitions for them in that file too. (It already has the
similar template include code to define them for the softmmu case,
so it makes sense to have it deal with defining them for user-only.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-12-git-send-email-peter.maydell@linaro.org
The very short ld*/st* defines are now not used anywhere; delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-11-git-send-email-peter.maydell@linaro.org
The ld*_kernel and st*_kernel defines are not used anywhere;
delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-10-git-send-email-peter.maydell@linaro.org
The five ldul_ macros are not used anywhere and are marked up with an XXX
comment. "ldul" is a non-standard prefix for our family of load instructions:
we don't mark 32-bit accesses for signedness because they return a 32 bit
quantity. So just delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1421334118-3287-2-git-send-email-peter.maydell@linaro.org
Unify pieces of cpu-all.h, exec-all.h, softmmu_exec.h and tcg/tcg.h
into a single new header file with all helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
