Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to drop group file. Define group in tests as a preparatory
step.
The patch is generated by
cd tests/qemu-iotests
grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not only is it a bit stupid to try to filter multi-line "Formatting"
output (because we only need it for a single test, which can easily be
amended to no longer need it), it is also problematic when there can be
output after a "Formatting" line that we do not want to filter as if it
were part of it.
So rename _filter_img_create to _do_filter_img_create, let it filter
only a single line, and let _filter_img_create loop over all input
lines, calling _do_filter_img_create only on those that match
/^Formatting/ (basically, what _filter_img_create_in_qmp did already).
(And fix 020 to work with that.)
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200709110205.310942-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now, _filter_img_create just filters out everything that looks
format-dependent, and applies some filename filters. That means that we
have to add another filter line every time some format gets a new
creation option. This can be avoided by instead discarding everything
and just keeping what we know is format-independent (format, size,
backing file, encryption information[1], preallocation) or just
interesting to have in the reference output (external data file path).
Furthermore, we probably want to sort these options. Format drivers are
not required to define them in any specific order, so the output is
effectively random (although this has never bothered us until now). We
need a specific order for our reference outputs, though. Unfortunately,
just using a plain "sort" would change a lot of existing reference
outputs, so we have to pre-filter the option keys to keep our existing
order (fmt, size, backing*, data, encryption info, preallocation).
Finally, this makes it difficult for _filter_img_create to automagically
work for QMP output. Thus, this patch adds a separate
_filter_img_create_for_qmp function that echos every line verbatim that
does not start with "Formatting", and pipes those "Formatting" lines to
_filter_img_create.
[1] Actually, the only thing that is really important is whether
encryption is enabled or not. A patch by Maxim thus removes all
other "encrypt.*" options from the output:
https://lists.nongnu.org/archive/html/qemu-block/2020-06/msg00339.html
But that patch needs to come later so we can get away with changing
as few reference outputs in this patch here as possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-2-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.
(In the process, clean up the indentation of every _cleanup() this patch
touches.)
((Also, use quotes consistently. I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 141 attempted to use brace expansion to remove all images
with a single command. However, for this to work, the braces shouldn't
be quoted.
With this fix, the tests correctly cleans up its scratch images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.
If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).
This updates those tests that did not have a cleanup in qemu-iotests.
(I swapped spaces for tabs in test 102 as well)
Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com
It's been a long journey, but here we are.
The supported blockdev-add is not compatible to its experimental
predecessors; bump all Since: tags to 2.9.
x-blockdev-remove-medium, x-blockdev-insert-medium and
x-blockdev-change need a bit more work, so leave them alone for now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The mirror block job is mainly used for two different scenarios:
Mirroring to an otherwise unused, independent target node, or for active
commit where the target node is part of the backing chain of the source.
Similarly to the commit block job patch, we need to insert a new filter
node to keep the permissions correct during active commit.
Note that one change this implies is that job->blk points to
mirror_top_bs as its root now, and mirror_top_bs (rather than the actual
source node) contains the bs->job pointer. This requires qemu-img commit
to get the job by name now rather than just taking bs->job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Now that QAPI supports boxed types, we can have unions at the top level
of a command, so let's put our real options directly there for
blockdev-add instead of having a single "options" dict that contains the
real arguments.
blockdev-add is still experimental and we already made substantial
changes to the API recently, so we're free to make changes like this
one, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
drop this variable from the tests.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
