x and y offsets and width and height of the scanout texture
is not correctly configured in case guest scanout frame is
dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-ID: <20230621213150.29573-1-dongwon.kim@intel.com>
(cherry picked from commit 37802a24eb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
job may be NULL if queue->exit is true. Check
it before dereference job.
Fixes: f31f9c1080 ("vnc: add magic cookie to VncState")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit bdfca8a22f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Windows sends an extra left control key up/down input event for
every right alt key up/down input event for keyboards with
international layout. Since commit 830473455f ("ui/sdl2: fix
handling of AltGr key on Windows") QEMU uses a Windows low level
keyboard hook procedure to reliably filter out the special left
control key and to grab the keyboard on Windows.
The SDL2 version 2.0.16 introduced its own Windows low level
keyboard hook procedure to grab the keyboard. Windows calls this
callback before the QEMU keyboard hook procedure. This disables
the special left control key filter when the keyboard is grabbed.
To fix the problem, disable the SDL2 Windows low level keyboard
hook procedure.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230418062823.5683-1-vr_qemu@t-online.de>
(cherry picked from commit 1dfea3f212)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SDL doesn't grab Alt+F4 under Windows by default. Pressing Alt+F4 thus closes
the VM immediately without confirmation, possibly leading to data loss. Fix
this by always grabbing Alt+F4 on Windows hosts, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-3-shentey@gmail.com>
(cherry picked from commit 083db9db44)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
By default, SDL grabs Alt+Tab only in non-fullscreen mode. This causes Alt+Tab
to switch tasks on the host rather than in the VM in fullscreen mode while it
switches tasks in non-fullscreen mode in the VM. Fix this confusing behavior
by grabbing Alt+Tab in fullscreen mode, always causing tasks to be switched in
the VM.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417192139.43263-2-shentey@gmail.com>
(cherry picked from commit efc00a3709)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before sdl2_gl_update() is called, sdl2_gl_switch() may decide to
destroy the console window and its associated shaders.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1644
Fixes: c84ab0a500 ("ui/console: optionally update after gfx switch")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20230511074217.4171842-1-marcandre.lureau@redhat.com>
(cherry picked from commit b3a654d82e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vc->gfx.w and vc->gfx.h are not updated appropriately in this code path,
which leads to a different scaling factor for rendering the cursor on
some edge cases (e.g. the focus has left and re-entered the gtk window).
This can be reproduced using vhost-user-gpu with the gtk ui on the x11
backend.
Use the surface dimensions which are already updated accordingly.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230320160856.364319-2-ernunes@redhat.com>
(cherry picked from commit f8a951bb95)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The gd_motion_event size has some calculations for the cursor position,
which also take into account things like different size of the
framebuffer compared to the window size.
The use of window size makes things more difficult though, as at least
in the case of Wayland includes the size of ui elements like a menu bar
at the top of the window. This leads to a wrong position calculation by
a few pixels.
Fix it by using the size of the widget, which already returns the size
of the actual space to render the framebuffer.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20230320160856.364319-1-ernunes@redhat.com>
(cherry picked from commit 2f31663ed4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The dmabuf->y0_top flag is passed to .dpy_gl_scanout_dmabuf(), however
in the gtk ui both implementations dropped it when doing the next
scanout_texture call.
Fixes flipped linux console using vhost-user-gpu with the gtk ui
display.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230220175605.43759-1-ernunes@redhat.com>
(cherry picked from commit 94400fa53f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org
(cherry picked from commit cd22a0f520)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If hostlen is zero, there is a possibility that addrstr[hostlen - 1]
underflows and, if a closing bracked is there, hostlen - 2 is passed
to g_strndup() on the next line. If websocket==false then
addrstr[0] would be a colon, but if websocket==true this could in
principle happen.
Fix it by checking hostlen.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3f9c41c5df)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A warning, "qemu: warning: console: no gl-unblock within" followed by
guest scanout lockup can happen if dpy_gl_update is called in a row
and the second call is made before gd_draw_event scheduled by the first
call is taking place. This is because draw call returns without decrementing
gl_block ref count if the dmabuf was already submitted as shown below.
(gd_gl_area_draw/gd_egl_draw)
if (dmabuf) {
if (!dmabuf->draw_submitted) {
return;
} else {
dmabuf->draw_submitted = false;
}
}
So it should not schedule any redundant draw event in case draw_submitted is
already set in gd_egl_fluch/gd_gl_area_scanout_flush.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221021192315.9110-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <9a0d0718aafaa52029fad76a149f3200b6bba0dd.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8f9abdf586 ("chardev: src buffer const for write functions")
changed the type of the second parameter of qemu_chr_be_write()
from uint8_t * to const uint8_t *. Remove the now useless type
casts from qemu_chr_be_write() function calls in ui/console.c and
ui/gtk.c.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20221022141204.29358-1-vr_qemu@t-online.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The patch adds "show_menubar" command line option for GTK UI similar to
"show_tabs". This option allows to hide menu bar initially, it still can
be toggled by shortcut and other shortcuts still work.
Signed-off-by: Bryce Mills <brycemills@proton.me>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Although the grab menu item represents the tabbed displays, the old
implicit mouse ungrabbing logic changes the grab menu item even for
an untabbed display.
Leave the grab menu item when implicitly ungrabbing mouse for an
untabbed display. The new ungrabbing logic introduced in
gd_mouse_mode_change() strictly follows the corresponding grabbing
logic found in gd_button_event().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221008140116.11473-1-akihiko.odaki@daynix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A thread often fails to bind an egl context to itself after guest VM is
rebooted because the context is still owned by another thread. It is not
very clear what condition makes this happen but this can be prevented
by unbinding the context from the thread in the end of gd_egl_switch.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220928215805.4661-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extended ClientCutText messages start with a 4-byte header. If len < 4,
an integer underflow occurs in vnc_client_cut_text_ext. The result is
used to decompress data in a while loop in inflate_buffer, leading to
CPU consumption and denial of service. Prevent this by checking dlen in
protocol_client_msg.
Fixes: CVE-2022-3165
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Reported-by: TangPeng <tangpeng@qianxin.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20220925204511.1103214-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the source directory is always included in the include path,
the corresponding directory in the build tree is not. Therefore,
custom_targets (e.g. ui/dbus-display1.h) must be referred to using
the full path.
This avoids a build failure when ui/dbus-chardev.c is not built as
a module:
In file included from ../ui/dbus-chardev.c:32:
../ui/dbus.h:34:10: fatal error: dbus-display1.h: No such file or directory
34 | #include "dbus-display1.h"
| ^~~~~~~~~~~~~~~~~
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The png_destroy_write_struct() function frees all memory used by
libpng. Don't use the glib auto cleanup mechanism to free the
memory allocated by libpng again. For the pixman image, use only the
auto cleanup mechanism and remove the qemu_pixman_image_unref()
function call to prevent another double free.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1210
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220919061956.30929-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to reset the guest agent, we send CLOSED & OPENED events.
They are correctly received by the guest kernel. However, they might not
be noticed by the guest agent process, as the IO task (poll() for
example) might be wake up after both CLOSED & OPENED have been
processed.
Wait until the guest agent is disconnected to re-open our side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-6-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not only we have to reset the vdagent clipboards serial state, but also
the current QEMU clipboards info serial (the value is currently used by
qemu_clipboard_check_serial, only used by -display dbus).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The guest agent doesn't know what is the current serial state. Reset the
serial value whenever a new agent connection is established.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=2124446
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-4-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The incoming grab event should have a higher serial.
See also "vdagent: introduce VD_AGENT_CAP_CLIPBOARD_GRAB_SERIAL":
045a6978d6
This is only a relevant fix for the -display dbus, only user of that
function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220912102455.111765-3-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This work is based on:
https://patchew.org/QEMU/20220317125534.38706-1-philippe.mathieu.daude@gmail.com/
Simplify the initialization dance by running qemu_init() in the main
thread before the Cocoa event loop starts. The secondary thread only
runs only qemu_main_loop() and qemu_cleanup().
This fixes a case where addRemovableDevicesMenuItems() calls
qmp_query_block() while expecting the main thread to still hold
the BQL.
Overriding the code after calling qemu_init() is done by dynamically
replacing a function pointer variable, qemu_main when initializing
ui/cocoa, which unifies the static implementation of main() for
builds with ui/cocoa and ones without ui/cocoa.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220819132756.74641-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Define a QEMU special key constant for the tab key and add an entry for
it in the qcode_to_keysym table. This allows tab completion to work again
in the SDL monitor virtual console, which has been broken ever since the
migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net>
Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-11-peter.maydell@linaro.org
The display may be corrupted when changing screen colour depth in
qemu-system-ppc/MacOS since 7.0.
Do not short-cut qemu_console_resize() if the surface is backed by vga
vram. When the scanout isn't set, or it is already allocated, or opengl,
and the size is fitting, we still avoid the reallocation & replace path.
Fixes: commit cb8962c1 ("ui: do not create a surface when resizing a GL scanout")
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220725115815.2461322-1-marcandre.lureau@redhat.com>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without CONFIG_GBM, compiling dbus-display fails with
../ui/dbus.c: In function ‘dbus_create_context’:
../ui/dbus.c:47:20: error: ‘qemu_egl_rn_ctx’ undeclared (first use in this function); did you mean ‘qemu_egl_init_ctx’?
47 | qemu_egl_rn_ctx);
| ^~~~~~~~~~~~~~~
| qemu_egl_init_ctx
../ui/dbus.c:47:20: note: each undeclared identifier is reported only once for each function it appears in
and many other similar errors, because include/ui/egl-helpers.h only has
these declaration if gbm is found on the system.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1108
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch adds "show_tabs" command line option for GTK ui similar to
"grab_on_hover". This option allows tabbed view mode to not have to be
enabled by hand at each start of the VM.
Signed-off-by: Felix "xq" Queißner <xq@random-projects.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220712133753.18937-1-xq@random-projects.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The D-Bus connection starts processing messages before QEMU has the time
to set the object manager server. This is causing dbus-display-test to
fail randomly with:
ERROR:../tests/qtest/dbus-display-test.c:68:test_dbus_display_vm:
assertion failed
(qemu_dbus_display1_vm_get_name(QEMU_DBUS_DISPLAY1_VM(vm)) ==
"dbus-test"): (NULL == "dbus-test") ERROR
Use the delayed message processing flag and method to avoid that
situation.
(the bus connection doesn't need a fix, as the initialization is done
synchronously)
Reported-by: Robinson, Cole <crobinso@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <20220609152647.870373-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retrieve the refresh rate of the display and reflect it with
dpy_set_ui_info() and update_displaychangelistener(), allowing the
guest and DisplayChangeListener to consume the information.
The information will be used as a hint how often the display should
be updated. For example, when we run 30 Hz physical display updates
it is pointless for the guest to update the screen at 60Hz
frequency, the guest can spare some work instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220702142519.12188-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
I noticed this error while building QEMU on Mac OS X:
[1040/1660] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
../ui/cocoa.m:803:17: warning: variable 'switched_to_fullscreen' set but not used [-Wunused-but-set-variable]
static bool switched_to_fullscreen = false;
^
1 warning generated.
I think the behavior is fine if you remove "switched_to_fullscreen", I can
still switch in and out of mouse grabbed mode and fullscreen mode with this
change, and Command keycodes will only be passed to the guest if the mouse
is grabbed, which I think is the right behavior. I'm not sure why a static
piece of state was needed to handle that in the first place. Perhaps the
refactoring of the flags-state-change fixed that by toggling the Command
keycode on.
I tested this with an Ubuntu core image on macOS 12.4
wget https://cdimage.ubuntu.com/ubuntu-core/18/stable/current/ubuntu-core-18-i386.img.xz
xz -d ubuntu-core-18-i386.img.xz
qemu-system-x86_64 -drive file=ubuntu-core-18.i386.img,format=raw
Fixes: 6d73bb643a ("ui/cocoa: Clear modifiers whenever possible")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702044304.90553-1-peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[-NSPasteboard dataForType:] returns an autoreleased NSString,
and callings its release method will result in double-free when
the global autorelease pool is released. Use NSAutoreleasePool to
release it properly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220614212131.94696-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The update makes it easier to find and specify devices.
They can only be found by device type name without the id field,
for example, devices of the same type have the same label.
The update also adds a head field,
which is useful for devices that support multiple heads,
such as virtio-gpu.
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Message-Id: <4C23C17B8E87E74E906A25A3254A03F4018FC045B0@SHASXM06.verisilicon.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since about 2018 virglrenderer (commit fa835b0f88 "vrend: don't
hardcode context version") tries to open the highest available GL
context version. This is done by creating the known GL context
versions from the highest to the lowest until (*create_gl_context)
returns a context != NULL.
This does not work properly with
the current QEMU gd_gl_area_create_context() function, because
gdk_gl_context_realize() on Wayland creates a version 3.0 legacy
context if the requested GL context version can't be created.
In order for virglrenderer to find the highest available GL
context version, return NULL if the created context version is
lower than the requested version.
This fixes the following error:
QEMU started with -device virtio-vga-gl -display gtk,gl=on.
Under Wayland, the guest window remains black and the following
information can be seen on the host.
gl_version 30 - compat profile
(qemu:5978): Gdk-WARNING **: 16:19:01.533:
gdk_gl_context_set_required_version
- GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.537:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.554:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
vrend_renderer_fill_caps: Entering with stale GL error: 1282
To reproduce this error, an OpenGL driver is required on the host
that doesn't have the latest OpenGL extensions fully implemented.
An example for this is the Intel i965 driver on a Haswell processor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The counterpart function for gd_gl_area_create_context() is
currently empty. Implement the gd_gl_area_destroy_context()
function to avoid GL context leaks.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
