MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Rearrange include directives so that we include osdep.h first.
This has to be done manually because clean-includes doesn't
handle C++.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-7-git-send-email-peter.maydell@linaro.org
The std::abs() function did not get a version that works on
'long long' until C++11. Avoid it, so that we can compile on
32-bit platforms (where int64_t is 'long long') with older
compilers (which don't support C++11).
Reported-by: Franz-Josef Haider <Franz-Josef.Haider@student.uibk.ac.at>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453739429-31477-1-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-33-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-32-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-28-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-12-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
Don't define TRUE and FALSE locally or manually include stdio.h;
instead use osdep.h which provides them.
This is a necessary prerequisite for moving to "everywhere includes
osdep.h", because otherwise there is a compile error due to the
redefinition of TRUE and FALSE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453831531-667-2-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Commit 8acc216b95 attempted to silence some sign-compare
warnings in libvixl by adding -Wno-sign-compare to the CFLAGS
for the relevant objects. Unfortunately it was ineffective
because it was placed before $(QEMU_CFLAGS), so the -Wall in
the general flags overrode -Wno-sign-compare rather than
vice-versa. Reorder the flags so the warning suppression works.
Thanks to Franz-Josef Haider <Franz-Josef.Haider@student.uibk.ac.at>
for pointing out what was wrong with the original patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1452783202-576-1-git-send-email-peter.maydell@linaro.org
The VIXL code includes some equality comparisons between signed
and unsigned types. Modern gcc and clang do not complain about
these, but older versions of gcc such as gcc 4.6.3 do. Since
libvixl is an upstream library, the simplest approach is to
suppress the warnings by applying -Wno-sign-compare to the
relevant files.
(GCC 4.6 is not quite yet irrelevant for us; it is the gcc
shipped with Ubuntu Precise, for example, which is an LTS
release not yet out of its support period.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452604204-27202-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Update our copy of libvixl to upstream's 1.12 release.
The major benefit from QEMU's point of view is that some instructions
previously disassembled as "unimplemented (System)" are now displayed
as something more useful. It also fixes some warnings about format
strings that newer w64-mingw32 compilers were emitting.
We didn't have any local changes to libvixl so nothing needed
to be forward-ported.
Although this is a large commit (due to upstream renaming most
of the files), only a few of the files changed in this commit
are not just straight copies of upstream libvixl files:
disas/arm-a64.cc
disas/libvixl/Makefile.objs
disas/libvixl/README
Note that this commit introduces some signed-unsigned comparison
warnings on the old mingw compilers. Those compilers have broken
TLS support anyway so have only ever been much use for compile tests;
anybody still using them should add -Wno-sign-compare to their
--extra-cflags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
clang 3.7.0 on x86_64 warns about the following:
disas/arm.c:1782:17: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
imm |= (-1 << 7);
~~ ^
Note that this patch preserves the tab indent in this source file
because the surrounding code still uses tabs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
MIPS r6 encodes jr as jalr zero, and jr.hb as jalr.hb zero, so add these
encodings to the MIPS disassembly table.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1443788657-14537-3-git-send-email-james.hogan@imgtec.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Type fprintf_function which fits here was defined with this attribute.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437208027-14584-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the Release 6 of the MIPS Architecture, LL, SC, LLD, SCD, PREF
and CACHE instructions have 9 bits offsets.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Compilation of TCI was accidentally broken by the recent disassembler
changes:
CC x86_64-softmmu/arch_init.o
In file included from target-i386/cpu-qom.h:23:0,
from target-i386/cpu.h:986,
from include/qemu-common.h:122,
from include/disas/bfd.h:12,
from disas/tci.c:20:
include/qom/cpu.h:178:43: error: unknown type name ‘disassemble_info’
void (*disas_set_info)(CPUState *cpu, disassemble_info *info);
^
include/qom/cpu.h:179:1: error:
no semicolon at end of struct or union [-Werror]
} CPUClass;
^
cc1: all warnings being treated as errors
The underlying cause of this is an include loop:
bfd.h -> qemu-common.h -> target-arm/cpu.h -> target-arm/cpu-qom.h
-> qom/cpu.h -> bfd.h
which means that if bfd.h is included first then qom/cpu.h doesn't
get the definition of the disassemble_info type that it wanted.
The easiest fix for this is to include qemu-common.h from tci.c
before including disas/bfd.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cris has the complication of variable length instructions and has
a check in place to clamp memory reads in case the disas request
doesn't have enough bytes for the instruction being disas'd. This
breaks down in the case where disassembling for the monitor where
the buffer length is defaulted to 0.
The buffer length should never be zero for a regular target_disas,
so we can safely assume the 0 case is for the monitor in which case
consider the buffer length to be the max for cris instructions.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In a normal disassembly flow, the printf() and stream being used varies
from disas job to job. In particular it varies if mixing monitor_disas
and target_disas.
Make both the printf() function and target stream settable in the
QEMUDisassmbler class.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access
upper word of extended to 64-bits CP0 registers.
In MIPS64, when CP0 destination register specified is the EntryLo0 or
EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or
EntryLo1. This is to compensate for RI and XI, which were shifted to bits
63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate
functions for EntryLo0 and EntryLo1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit
that is set by execution of an LL instruction, and thus when placed between
an LL and SC sequence, will never cause the SC to fail.
Presence of ERETNC is denoted by the Config5.LLB.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Warnings from the Sparse static analysis tool:
disas/microblaze.c:289:3: warning:
symbol 'opcodes' was not declared. Should it be static?
disas/microblaze.c:570:6: warning:
symbol 'register_prefix' was not declared. Should it be static?
disas/microblaze.c:571:6: warning:
symbol 'special_register_prefix' was not declared. Should it be static?
disas/microblaze.c:572:6: warning:
symbol 'fsl_register_prefix' was not declared. Should it be static?
disas/microblaze.c:573:6: warning:
symbol 'pvr_register_prefix' was not declared. Should it be static?
Remove the unused variable special_register_prefix.
The variable pvr_register_prefix was unused, too, but can be used.
Add also 'const' where possible.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
disas/arm.c:1552:15: warning:
symbol 'last_type' was not declared. Should it be static?
disas/arm.c:1553:5: warning:
symbol 'last_mapping_sym' was not declared. Should it be static?
disas/arm.c:1554:9: warning:
symbol 'last_mapping_addr' was not declared. Should it be static?
Instead of adding 'static', the unused variables and the unused code which
refers to those variables (which was deactivated a long time ago in
commit 4b0f1a8b) are removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warning from the Sparse static analysis tool:
disas/sh4.c:335:22: warning:
symbol 'sh_table' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
disassembling relative branches in code which doesn't reside at
what the guest CPU would think its execution address is. Use
the new MapCodeAddress() API to tell libvixl where the code is
from the guest CPU's point of view so it can get the target
addresses right.
Previous disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x7f6cb7020434)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x7f6cb702042c)
0x0000000040000014: d61f0080 br x4
Fixed disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x40000020)
0x0000000040000014: d61f0080 br x4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-3-git-send-email-peter.maydell@linaro.org
Update our copy of libvixl to upstream's 1.7 release.
This includes upstream's fix for the issue we had a local
patch for in commit 94cc44a9e.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-2-git-send-email-peter.maydell@linaro.org
The variables s390_opformats and s390_num_opformats are unused and
provoke clang warnings:
disas/s390.c:849:33: warning: variable 's390_opformats' is not needed and will not be emitted [-Wunneeded-internal-declaration]
static const struct s390_opcode s390_opformats[] =
^
disas/s390.c:875:18: warning: unused variable 's390_num_opformats' [-Wunused-const-variable]
static const int s390_num_opformats =
^
Delete them, since QEMU doesn't use them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove sparc_opcode_archs and the macros which use it, because we don't
use them in QEMU and they provoke clang warnings:
disas/sparc.c:307:39: warning: unused variable 'sparc_opcode_archs' [-Wunused-const-variable]
static const struct sparc_opcode_arch sparc_opcode_archs[] =
^
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This array is used by print_mips16_insn_arg() which is guarded by #if 0.
Therefore doing the same with the array as it generates clang warnings.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For Standard TLB configuration (Config.MT=1):
TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.
TLBINVF causes all entries to be invalidated.
Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
The instructions-a64.h header defines a number of floating point
constants whose initializers are function calls. gcc 5 will warn
if these constants are not used by the C or C++ file which includes
the header, because they imply a runtime cost. Since for the files
QEMU uses from libvixl we don't use these constants at all, just
remove them.
Upstream intend to fix these by shifting to an 'extern const' in
the header plus definition in a suitable source file, so we can
drop this patch when we sync with the upcoming libvixl 1.7.
The related compiling error:
CXX disas/arm-a64.o
In file included from /upstream/qemu/disas/libvixl/a64/disasm-a64.h:32:0,
from disas/arm-a64.cc:20:
disas/libvixl/a64/instructions-a64.h:98:13: error: 'vixl::kFP32PositiveInfinity' defined but not used [-Werror=unused-variable]
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
^
disas/libvixl/a64/instructions-a64.h:99:13: error: 'vixl::kFP32NegativeInfinity' defined but not used [-Werror=unused-variable]
const float kFP32NegativeInfinity = rawbits_to_float(0xff800000);
^
disas/libvixl/a64/instructions-a64.h💯14: error: 'vixl::kFP64PositiveInfinity' defined but not used [-Werror=unused-variable]
const double kFP64PositiveInfinity =
^
disas/libvixl/a64/instructions-a64.h:102:14: error: 'vixl::kFP64NegativeInfinity' defined but not used [-Werror=unused-variable]
const double kFP64NegativeInfinity =
^
disas/libvixl/a64/instructions-a64.h:107:21: error: 'vixl::kFP64SignallingNaN' defined but not used [-Werror=unused-variable]
static const double kFP64SignallingNaN =
^
disas/libvixl/a64/instructions-a64.h:109:20: error: 'vixl::kFP32SignallingNaN' defined but not used [-Werror=unused-variable]
static const float kFP32SignallingNaN = rawbits_to_float(0x7f800001);
^
disas/libvixl/a64/instructions-a64.h:112:21: error: 'vixl::kFP64QuietNaN' defined but not used [-Werror=unused-variable]
static const double kFP64QuietNaN =
^
disas/libvixl/a64/instructions-a64.h:114:20: error: 'vixl::kFP32QuietNaN' defined but not used [-Werror=unused-variable]
static const float kFP32QuietNaN = rawbits_to_float(0x7fc00001);
^
disas/libvixl/a64/instructions-a64.h:117:21: error: 'vixl::kFP64DefaultNaN' defined but not used [-Werror=unused-variable]
static const double kFP64DefaultNaN =
^
disas/libvixl/a64/instructions-a64.h:119:20: error: 'vixl::kFP32DefaultNaN' defined but not used [-Werror=unused-variable]
static const float kFP32DefaultNaN = rawbits_to_float(0x7fc00000);
^
cc1plus: all warnings being treated as errors
make: *** [disas/arm-a64.o] Error 1
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
[PMM: Rewrote the commit message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update our copy of libvixl to upstream 1.6. There are no
changes of any particular interest to QEMU, so this is simply
keeping up with current upstream.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412091418-25744-1-git-send-email-peter.maydell@linaro.org
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced
MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions.
In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant
i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been
updated yet.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot -
they have forbidden slot instead. However, current implementation does not
support forbidden slot yet.
Add also BC1EQZ and BC1NEZ instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping
with MIPS32R6 SDBBP.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Use "R6_" prefix in front of all new Multiply / Divide instructions for
easier differentiation between R6 and preR6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6.
Additionally, the hint codes in PREF instruction greater than or
equal to 24 generate Reserved Instruction Exception.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of LL and SC instruction has changed in MIPS32 Release 6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
The pre-v9 ADDX/SUBX insns were renamed ADDC/SUBC for v9.
Standardizing on the v9 name makes things less confusing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
On T4 and newer Sparc chips we have an add-with-carry insn
that takes its input from %xcc instead of %icc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Update our copy of libvixl to upstream's 1.5 release.
This includes the upstream versions of the fixes we
were carrying locally (commit ffebe899).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1407162987-4659-1-git-send-email-peter.maydell@linaro.org
Currently the Makefile of disas/libvixl appends
-I$(SRC_PATH)/disas/libvixl to QEMU_CFLAGS. As a consequence C++ files
that #include "utils.h", such as disas/libvixl/a64/instructions-a64.cc,
are going to look for utils.h on all the other include paths first.
When building QEMU as part of the Xen make system, another unrelated
utils.h file is going to be chosen for inclusion, causing a build
failure:
In file included from disas/libvixl/a64/instructions-a64.cc:27:0:
/qemu/disas/libvixl/a64/instructions-a64.h:88:64: error:
'rawbits_to_float' was not declared in this scope
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
Fix the problem by prepending (rather than appending) the libvixl
include path to QEMU_CFLAGS.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the compiler is told to check the arguments of AppendToOutput,
it reports several errors of this kind:
error: format ‘%d’ expects argument of type ‘int’,
but argument 3 has type ‘int64_t {aka long int}’ [-Werror=format]
Fix those bugs by using the correct format strings with PRId64, PRIx64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1403113751-19799-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update our copy of libvixl to upstream's 1.4 release.
Note that we no longer need any local fixes for compilation
on 32 bit hosts -- they have all been integrated upstream.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1399040419-9227-1-git-send-email-peter.maydell@linaro.org
Acked-by: Richard Henderson <rth@twiddle.net>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"%d" or "%x" won't work on hosts where int values are smaller than 64 bit.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1394219753-26106-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 999b53ec87:
Author: Claudio Fontana <claudio.fontana@linaro.org>
Date: Wed Feb 5 17:27:28 2014 +0000
disas: Implement disassembly output for A64
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
disas/libvixl/ contains functions which uses 64bit constants
without using appropriate suffixes, which fails on 32bits.
Fix this by using ULL suffix.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix various minor issues with upstream libvixl so that it will compile
successfully on the platforms QEMU cares about:
* remove unused GBytes constant (it clashes with the glib headers)
* fix suffixes on constants to use 'LL' for 64 bit constants so
we can compile on 32 bit hosts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the subset of the libvixl sources that are needed for the
A64 disassembler support. These sources come from
https://github.com/armvixl/vixl commit 578645f14e122d2b
which is VIXL release 1.1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use info->endian to select the endian of the instruction to
be disassembled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add explicit braces round an empty for-loop body; this fits
QEMU style and is easier to read than an inconspicuous semicolon
at the end of the line. It also silences a clang warning:
disas/i386.c:4723:49: warning: for loop has empty body [-Wempty-body]
for (i = 0; tmp[i] == '0' && tmp[i + 1]; i++);
^
disas/i386.c:4723:49: note: put the semicolon on a separate line to silence this warning [-Wempty-body]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Also fix disassembly for COMPARE AND BRANCH. The table must be
sorted by primary opcode, and several were out of place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
