All deps that used global qemu_system_powerdown var are now converted
to notifiers, so remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In addition, there is no need to allocate an extra irq just for
rising SCI in irq handler. Just rise SCI right from notifier
handler instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Notifier will be used for signaling powerdown request to guest in
a more general way and intended to replace very specific
qemu_irq_rise(qemu_system_powerdown) and will allow to remove global
variable qemu_system_powerdown.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The movcond_i32 op has to be protected with TCG_TARGET_HAS_movcond_i32
to fix the build with -march < i686.
Thanks to Richard Henderson for the hint.
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When movcond_i32 is available we can further reduce the generated
op count from 12 to 6, and the generated code size on i686 from
88 to 74 bytes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Avoiding 64-bit arithmetic (outside of the compare) reduces the
generated op count from 15 to 12, and the generated code size on
i686 from 105 to 88 bytes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Checking that we don't try for idx != [01] is trivial. Checking
that we don't issue more than one of any index requires a tad
more data and some ifdefs protecting that new variable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Given these are constants, checking once here means everything
after can assume they're correct.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Like the C assert macro, except only enabled for CONFIG_DEBUG_TCG,
and without having to set _NDEBUG and disable all other asserts at
the same time.
The use of __builtin_unreachable (when available) gives the compiler
the same information, which may (or may not) help it optimize better.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For tcg_gen_concat_i32_i64 we only use deposit if the host supports it.
For tcg_gen_concat32_i64 even if the host does not, as we get identical
code before and after.
Note that this relies on the ANDI -> EXTU patch for the identity claim.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Note that xori_i64 failed to perform even the minimal
optimizations promised by the README.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Note that andi_i64 failed to perform even the minimal
optimizations promised by the README.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The README file documented the operand ordering of the tcg_gen_*
functions. Since we're documenting opcodes here, use the true
operand ordering.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the MIPS32(R2) cpu detection so that it also works with
-march=octeon. Thanks to Andrew Pinski for the hint.
Cc: Andrew Pinski <apinski@cavium.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* kwolf/for-anthony:
block: remove keep_read_only flag from BlockDriverState struct
block: convert bdrv_commit() to use bdrv_reopen()
block: vpc image file reopen
block: vdi image file reopen
block: vmdk image file reopen
block: qcow image file reopen
block: qcow2 image file reopen
block: qed image file reopen
block: raw image file reopen
block: raw-posix image file reopen
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: do not parse BDRV_O_CACHE_WB in block drivers
block: move open flag parsing in raw block drivers to helper functions
block: move aio initialization into a helper function
block: Framework for reopening files safely
block: make bdrv_set_enable_write_cache() modify open_flags
block: correctly set the keep_read_only flag
blockdev: preserve readonly and snapshot states across media changes
* stefanha/trivial-patches:
w32: Always use standard instead of native format strings
net/socket: Fix compiler warning (regression for MinGW)
linux-user: Remove redundant null check and replace free by g_free
qemu-timer: simplify qemu_run_timers
TextConsole: saturate escape parameter in TTY_STATE_CSI
curses: don't initialize curses when qemu is daemonized
dtrace backend: add function to reserved words
pflash_cfi01: Fix warning caused by unreachable code
ioh3420: Remove unreachable code
lm4549: Fix buffer overflow
cadence_uart: Fix buffer overflow
qemu-sockets: Fix potential memory leak
qemu-ga: Remove unreachable code after g_error
target-i386: Allow tsc-frequency to be larger then 2.147G
* bonzini/scsi-next:
SCSI: Standard INQUIRY data should report HiSup flag as set.
scsi-disk: use scsi_data_cdb_length
scsi: introduce scsi_cdb_length and scsi_data_cdb_length
scsi-disk: fix check for out-of-range LBA
scsi-disk: introduce check_lba_range
iSCSI: We dont need to explicitely call qemu_notify_event() any more
iSCSI: We need to support SG_IO also from iscsi_ioctl()
* bonzini/nbd-next:
nbd: add nbd_export_get_blockdev
nbd: negotiate with named exports
nbd: register named exports
qemu-nbd: rewrite termination conditions to use a state machine
nbd: add notification for closing an NBDExport
nbd: track clients into NBDExport
nbd: add reference counting to NBDExport
nbd: do not leak nbd_trip coroutines when a connection is torn down
nbd: make refcount interface public
nbd: do not close BlockDriverState in nbd_export_close
nbd: pass NBDClient to nbd_send_negotiate
nbd: add more constants
The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is currently nothing that needs to be done for VPC image
file reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is currently nothing that needs to be done for VDI reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch supports reopen for VMDK image files. VMDK extents are added
to the existing reopen queue, so that the transactional model of reopen
is maintained with multiple image files.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qcow format.
There is currently nothing that needs to be done by the qcow driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qcow2 format.
There is currently nothing that needs to be done by the qcow2 driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qed format.
There is currently nothing that needs to be done by the qed driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the raw format.
There is currently nothing that needs to be done by the raw driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is derived from the Supriya Kannery's reopen patches.
This contains the raw-posix driver changes for the bdrv_reopen_*
functions. All changes are staged into a temporary scratch buffer
during the prepare() stage, and copied over to the live structure
during commit(). Upon abort(), all changes are abandoned, and the
live structures are unmodified.
The _prepare() will create an extra fd - either by means of a dup,
if possible, or opening a new fd if not (for instance, access
control changes). Upon _commit(), the original fd is closed and
the new fd is used. Upon _abort(), the duplicate/new fd is closed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aligned_buf pointer and aligned_buf size are no longer used in
raw_posix.c, so remove all references to them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than check for a non-NULL aligned_buf to determine if
raw_aio_submit needs to check for alignment, check for the presence
of BDRV_O_NOCACHE in the bs->open_flags.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags,
and in the bs->open_flags.
This patch removes the code, leaving the behaviour behind as if
BDRV_O_CACHE_WB was set.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Code motion, to move parsing of open flags into a helper function.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move AIO initialization for raw-posix block driver into a helper function.
In addition to just code motion, the aio_ctx pointer is checked for NULL,
prior to calling laio_init(), to make sure laio_init() is only run once.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is based on Supriya Kannery's bdrv_reopen() patch series.
This provides a transactional method to reopen multiple
images files safely.
Image files are queue for reopen via bdrv_reopen_queue(), and the
reopen occurs when bdrv_reopen_multiple() is called. Changes are
staged in bdrv_reopen_prepare() and in the equivalent driver level
functions. If any of the staged images fails a prepare, then all
of the images left untouched, and the staged changes for each image
abandoned.
Block drivers are passed a reopen state structure, that contains:
* BDS to reopen
* flags for the reopen
* opaque pointer for any driver-specific data that needs to be
persistent from _prepare to _commit/_abort
* reopen queue pointer, if the driver needs to queue additional
BDS for a reopen
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag,
but without the flag recorded in bs->open_flags, then next time
a reopen() is performed the enable_write_cache setting may be
inadvertently lost.
This will set the flag in open_flags, so it is preserved across
reopens.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I believe the bs->keep_read_only flag is supposed to reflect
the initial open state of the device. If the device is initially
opened R/O, then commit operations, or reopen operations changing
to R/W, are prohibited.
Currently, the keep_read_only flag is only accurate for the active
layer, and its backing file. Subsequent images end up always having
the keep_read_only flag set.
For instance, what happens now:
[ base ] kro = 1, ro = 1
|
v
[ snap-1 ] kro = 1, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
What we want:
[ base ] kro = 0, ro = 1
|
v
[ snap-1 ] kro = 0, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If readonly=on is given at device creation time, the ->readonly flag
needs to be set in the block driver state for this device so that
readonly-ness is preserved across media changes (qmp change command).
Similarly, to preserve the snapshot property requires ->open_flags to
be correct.
Signed-off-by: Kevin Shanahan <kmshanah@disenchant.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Those functions are missing in MinGW.
Some versions of MinGW-w64 include defines for gmtime_r and localtime_r.
Older versions of these macros are buggy (they return a pointer to a
static variable), therefore we don't want them. Newer versions are
similar to the code used here, but without the memset.
The implementation which is used here is not strictly reentrant,
but sufficiently good for QEMU on w32 or w64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[blauwirbel@gmail.com: added comment about locking]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
GLib 2.0 include files use __printf__ for the format attribute
which resolves to native format strings on w32 hosts.
QEMU wants standard format strings instead of native format
strings, so we simply change any declaration with __printf__
to use __gnu_printf__.
This works because all basic printf functions support both
kinds of format strings.
This fixes a compiler warning:
qapi/string-output-visitor.c: In function ‘print_type_int’:
qapi/string-output-visitor.c:34:5: warning: unknown conversion type character ‘l’ in format [-Wformat]
qapi/string-output-visitor.c:34:5: warning: too many arguments for format [-Wformat-extra-args]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Commit 213fd5087e removed a type cast
which is needed for MinGW:
net/socket.c:136: warning:
pointer targets in passing argument 2 of ‘sendto’ differ in signedness
/usr/lib/gcc/amd64-mingw32msvc/4.4.4/../../../../amd64-mingw32msvc/include/winsock2.h:1313: note:
expected ‘const char *’ but argument is of type ‘const uint8_t *’
Add a 'qemu_sendto' macro which provides that type cast where needed
and use the new macro instead of 'sendto'.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Report from smatch:
linux-user/syscall.c:3632 do_ioctl_dm(220) info:
redundant null check on big_buf calling free()
'big_buf' was allocated by g_malloc0, therefore free was also
replaced by g_free.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
ptimer_head is an invariant pointer to clock->active_timers.
Remove it, and just reference clock->active_timers directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Current qemu initializes curses even if -daemonize option is
passed. This cause problem because shell prompt appears without
calling endwin().
This patch adds new function, is_daemonized(), to OS dependent
code. With this function, curses_display_init() can check that qemu is
daemonized or not. If daemonized, curses_display_init() isn't called
and the problem is avoided.
Of course, -daemonize && -curses doesn't make sense. Users shouldn't
pass the arguments at the same time. But the problem is very painful
because Ctrl-C cannot be delivered to the terminal.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
