After commit f8d59dfb40
"block/backup: fix fleecing scheme: use serialized writes" fleecing
(specifically reading from backup target, when backup source is in
backing chain of backup target) is safe, because all backup-job writes
to target are serialized. Therefore we don't need additional
synchronization for these reads.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based calls
into the block layer from the replication driver.
Ideally, the replication driver should switch to doing everything
byte-based, but that's a more invasive change that requires a
bit more auditing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We have too many driver callback interfaces; simplify the mess
somewhat by merging the flags parameter of .bdrv_co_writev_flags()
into .bdrv_co_writev(). Note that as long as a driver doesn't set
.supported_write_flags, the flags argument will be 0 and behavior is
identical. Also note that the public function bdrv_co_writev() still
lacks a flags argument; so the driver signature is thus intentionally
slightly different. But that's not the end of the world, nor the first
time that the driver interface differs slightly from the public
interface.
Ideally, we should be rewriting all of these drivers to use modern
byte-based interfaces. But that's a more invasive patch to write
and audit, compared to the simplification done here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The protocol_name field is used when selecting a driver via protocol
syntax (i.e. <protocol_name>:<filename:options:...>). Drivers that are
only selected explicitly (e.g. driver=replication,mode=primary,...)
should not have a protocol_name.
This patch removes the protocol_name field from the brdv_replication
structure so that attempts to invoke this driver using protocol syntax
will fail gracefully:
$ qemu-img info replication:foo
qemu-img: Could not open 'replication:': Unknown protocol 'replication'
Buglink: https://bugs.launchpad.net/qemu/+bug/1726733
Signed-off-by: Fabiano Rosas <farosas@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
The bdrv_reopen*() implementation doesn't like it if the graph is
changed between queuing nodes for reopen and actually reopening them
(one of the reasons is that queuing can be recursive).
So instead of draining the device only in bdrv_reopen_multiple(),
require that callers already drained all affected nodes, and assert this
in bdrv_reopen_queue().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
We currently do not guard everywhere against a NULL bs->drv where we
should be doing so. Most of the places fixed here just do not care
about that case at all.
Some care implicitly, e.g. through a prior function call to
bdrv_getlength() which would always fail for an ejected BDS. Add an
assert there to make it more obvious.
Other places seem to care, but do so insufficiently: Freeing clusters in
a qcow2 image is an error-free operation, but it may leave the image in
an unusable state anyway. Giving qcow2_free_clusters() an error code is
not really viable, it is much easier to note that bs->drv may be NULL
even after a successful driver call. This concerns bdrv_co_flush(), and
the way the check is added to bdrv_co_pdiscard() (in every iteration
instead of only once).
Finally, some places employ at least an assert(bs->drv); somewhere, that
may be reasonable (such as in the reopen code), but in
bdrv_has_zero_init(), it is definitely not. Returning 0 there in case
of an ejected BDS saves us much headache instead.
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1728660
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203111.7666-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
replication_child_perm request write
permissions for all child which will lead bdrv_check_perm fail.
replication_child_perm() should request write
permissions only if it is writable itself.
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Reviewed-by: Xie Changlong <xiechanglong@cmss.chinamobile.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated(). But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.
For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting
the public interface to backup jobs (no semantic change), including
a change to CowRequest to track by bytes instead of cluster indices.
Note that this does not change the difference between the public
interface (starting point, and size of the subsequent range) and
the internal interface (starting and end points).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Xie Changlong <xiechanglong@cmss.chinamobile.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BDRVReplicationState.replication_state is a name with a bit of
duplication, plus it could be an enum like BDRVReplicationState.mode,
which is more readable and also more straightforward in a debugger.
Rename it, and improve the type while at it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Even if hidden_disk, secondary_disk are backing files, they all need
write permissions in replication scenario. Otherwise we will encouter
below exceptions on secondary side during adding nbd server:
{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk', 'writable': true } }
{"error": {"class": "GenericError", "desc": "Conflicts with use by hidden-qcow2-driver as 'backing', which does not allow 'write' on sec-qcow2-driver-for-nbd"}}
CC: Zhang Hailiang <zhang.zhanghailiang@huawei.com>
CC: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
CC: Wen Congyang <wencongyang2@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
All callers will have to request permissions for all of their child
nodes. Block drivers that act as simply filters can use the default
implementation of .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Refactor backup_start as backup_job_create, which only creates the job,
but does not automatically start it. The old interface, 'backup_start',
is not kept in favor of limiting the number of nearly-identical interfaces
that would have to be edited to keep up with QAPI changes in the future.
Callers that wish to synchronously start the backup_block_job can
instead just call block_job_start immediately after calling
backup_job_create.
Transactions are updated to use the new interface, calling block_job_start
only during the .commit phase, which helps prevent race conditions where
jobs may finish before we even finish building the transaction. This may
happen, for instance, during empty block backup jobs.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Bubble up the internal interface to commit and backup jobs, then switch
replication tasks over to using this methodology.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
After the next patch bdrv_drain_all will have to be called without holding any
AioContext. Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be needed in the next patch to retrieve the AioContext.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-14-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Without this change, there is a race condition in tests/test-replication.
Depending on how fast the failover job (active commit) runs, there is a
chance of two bad things happening:
1) replication_done can be called after the secondary has been closed
and hence when the BDRVReplicationState is not valid anymore.
2) two copies of the active disk are present during the
/replication/secondary/stop test (that test runs immediately after
/replication/secondary/start, which tests failover). This causes the
corruption detector to fire.
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The replication driver only supports the 'top-id' parameter for the
secondary side; it must not be supplied for the primary side.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Message-id: 1476247808-15646-1-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
