The alt_grab and ctrl_grab parameter of the -display sdl option prevent
the QAPIfication of the "sdl" part of the -display option, so we should
eventually remove them. And since this feature is also rather niche anyway,
we should not clutter the top-level option list with these, so let's
also deprecate the "-alt-grab" and the "-ctrl-grab" options while we're
at it.
Once the deprecation period of "alt_grab" and "ctrl_grab" is over, we
then can finally switch the -display sdl option to use QAPI internally,
too.
Message-Id: <20210825092023.81396-3-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The -display sdl option is not using QAPI internally yet, and uses hand-
crafted parsing instead (see parse_display() in vl.c), which is quite
ugly, since most of the other code is using the QAPIfied DisplayOption
already. Unfortunately, the "alt_grab" and "ctrl_grab" use underscores in
their names which has recently been forbidden in new QAPI code, so
a straight conversion is not possible. While we could add some exceptions
to the QAPI schema parser for this, the way these parameters have been
designed was maybe a bad idea anyway: First, it's not possible to enable
both parameters at the same time, thus instead of two boolean parameters
it would be better to have only one multi-choice parameter instead.
Second, the naming is also somewhat unfortunate since the "alt_grab"
parameter is not about the ALT key, but rather about the left SHIFT key
that has to be used additionally when the parameter is enabled.
So instead of trying to QAPIfy "alt_grab" and "ctrl_grab", let's rather
introduce an alternative to these parameters instead, a new parameter
called "grab-mod" which can either be set to "lshift-lctrl-lalt" or to
"rctrl". In case we ever want to support additional modes later, we can
then also simply extend the list of supported strings here.
Message-Id: <20210825092023.81396-2-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing arguments to plugins had to be done through "arg=<argname>".
This is redundant and introduces confusion especially when the argument
has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`).
This allows passing plugin arguments directly e.g:
`-plugin plugin_name,argname=argvalue`
For now, passing arguments through "arg=" is still supports but outputs
a deprecation warning.
Also, this commit makes boolean arguments passed to plugins in the
`argname=on|off` form instead of the deprecated short-boolean form.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
The documentation of the -machine memory-backend has some minor
formatting errors:
* Misindentation of the initial line meant that the whole option
section is incorrectly indented in the HTML output compared to
the other -machine options
* The examples weren't indented, which meant that they were formatted
as plain run-on text including outputting the "::" as text.
* The a) b) list has no rst-format markup so it is rendered as
a single run-on paragraph
Fix the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210719105257.3599-1-peter.maydell@linaro.org
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The parameters of intel-iommu device are non-trivial to understand. Add an
entry for it so that people can reference to it when using.
There're actually a few more options there, but I hide them explicitly because
they shouldn't be used by normal QEMU users.
Cc: Chao Yang <chayang@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jing Zhao <jinzhao@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210707154114.197580-1-peterx@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -smp option help is peculiarly specific about mentioning the CPU
upper limits, but these are wrong. The "PC" target has varying max
CPU counts depending on the machine type picked. Notes about guest
OS limits are inappropriate for QEMU docs. There are way too many
machine types for it to be practical to mention actual limits, and
some limits are even modified by downstream distribtions. Thus it
is better to remove the specific limits entirely.
The CPU topology reporting is also not neccessarily specific to the
PC platform and descriptions around the rules of usage are somewhat
terse. Expand this information with some examples to show effects
of defaulting.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The initial CPU count number is not required, if any of the topology
options are given, since it can be computed.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The list of CPU topology options are presented in a fairly arbitrary
order currently. Re-arrange them so that they're ordered from largest to
smallest unit
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sdl and gtk display options support more parameters than currently
documented. Also the "vnc" option got lost during a recent commit,
add it again.
Fixes: ddc717581c ("Add display suboptions to man pages")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.
While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mode=control argument configures a QMP monitor.
Signed-off-by: Ali Shirvani <alishir@routerhosting.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <0799f0de89ad2482672b5d61d0de61e6eba782da.1621407918.git.alishir@routerhosting.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These headers are also included from softmmu/vl.c, so they should be
in include/. Remove qemu-options-wrapper.h, since elsewhere
we include "template" headers directly and #define the parameters in
the including file; move qemu-options.h to include/.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a parameter for dirty gfn count for dirty rings. If zero, dirty ring is
disabled. Otherwise dirty ring will be enabled with the per-vcpu gfn count as
specified. If dirty ring cannot be enabled due to unsupported kernel or
illegal parameter, it'll fallback to dirty logging.
By default, dirty ring is not enabled (dirty-gfn-count default to 0).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-9-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
'id' of memory-backend-{file,ram} is not only for '-numa''s reference, but
also other parameters like '-device nvdimm'.
More clearly call out this to avoid misinterpretation.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1619080922-83527-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Policy "crash" calls abort() when deprecated input is received.
Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright. Masking that seems unlikely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
This is only semantically useful for QMP.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the new "password-secret" option, there is no reason to use the old
inecure "password" option with -spice, so it can be deprecated.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-4-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using SPICE the "password" option provides the password
in plain text on the command line. This is insecure as it is visible
to all processes on the host. As an alternative, the password can be
provided separately via the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--spice port=5901,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-3-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using VNC the "password" flag turns on password based
authentication. The actual password has to be provided separately via
the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--vnc localhost:0,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-2-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are some more -usbdevice options that have never been mentioned
in the documentation. Now that we removed -usbdevice from the list
of deprecated features again, we should document them properly.
While we're at it, also sort them alphabetically.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-5-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "delay" option was introduced as a way to enable Nagle's algorithm
with ",nodelay". Since the short form for boolean options has now been
deprecated, introduce a more properly named "nodelay" option. The "delay"
option remains as an undocumented option.
"delay" and "nodelay" are mutually exclusive. Because the check is
done at consumption time, the code also rejects them if one of the
two is specified via -set.
Based-on: <20210226080526.651705-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functionality of -writeconfig is limited and the code
does not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping)
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
The on|off syntax has been supported since -vnc switched to use
QemuOpts in commit 4db14629c3
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-7-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation for '-machine memory-backend' CLI option and
how to use it.
And document that x-use-canonical-path-for-ramblock-id,
is considered to be stable to make sure it won't go away by accident.
x- was intended for unstable/iternal properties, and not supposed to
be stable option. However it's too late to rename (drop x-)
it as it would mean that users will have to mantain both
x-use-canonical-path-for-ramblock-id (for QEMU 5.0-5.2) versions
and prefix-less for later versions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210121161504.1007247-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let -object memory-backend-file work on read-only files when the
readonly=on option is given. This can be used to share the contents of a
file between multiple guests while preventing them from consuming
Copy-on-Write memory if guests dirty the pages, for example.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-3-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update some docs and test cases to use 'on' | 'off' as the preferred
value for bool options.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The possible choices for panic, reset and watchdog actions are inconsistent.
"-action panic=poweroff" should be renamed to "-action panic=shutdown"
on the command line. This is because "-action panic=poweroff" and
"-action watchdog=poweroff" have slightly different semantics, the first
does an unorderly exit while the second goes through qemu_cleanup(). With
this change, -no-shutdown would not have to change "-action panic=pause"
"pause", just like it does not have to change the reset action.
"-action reboot=none" should be renamed to "-action reboot=reset".
This should be self explanatory, since for example "-action panic=none"
lets the guest proceed without taking any action.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "XVP" (Xen VNC Proxy) extension defines a mechanism for a VNC client
to issue power control requests to trigger graceful shutdown, reboot, or
hard reset.
This option is not enabled by default, since we cannot assume that users
with VNC access implicitly have administrator access to the guest OS.
Thus is it enabled with a boolean "power-control" option e.g.
-vnc :1,power-control=on
While, QEMU can easily support shutdown and reset, there's no easy way
to wire up reboot support at this time. In theory it could be done by
issuing a shutdown, followed by a reset, but there's no convenient
wiring for such a pairing in QEMU. It also isn't possible to have the
VNC server directly talk to QEMU guest agent, since the agent chardev is
typically owned by an external mgmt app.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[ kraxel: rebase to master ]
[ kraxel: add missing break ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Plumb the value through to alloc_code_gen_buffer. This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It has been marked as deprecated since QEMU v5.0, replaced by the
corresponding parameter of the -display option.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
