The QEMU block layer has a limit of INT_MAX bytes per transfer.
Expose it in the block limits VPD page for both regular transfers
and WRITE SAME.
Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_cdb_length() does not return the length of the cdb, but
the transfersize encoded in the cdb. So rename it to scsi_cdb_xfer()
and also rename all other related functions to end with _xfer.
We can then add a new scsi_cdb_length() which actually does return the
length of the cdb. With that DEBUG_SCSI can now display the correct
CDB buffer.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On this way, we can assure the new bootindex take effect
during vm rebooting.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.
Let's move it to scsi-bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.
Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.
It will also make implementing asynchronous cancellation easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the next step for decoupling block accounting functions from
BlockDriverState.
In a future commit the BlockAcctStats structure will be moved from
BlockDriverState to the device models structures.
Note that bdrv_get_stats was introduced so device models can retrieve the
BlockAcctStats structure of a BlockDriverState without being aware of it's
layout.
This function should go away when BlockAcctStats will be embedded in the device
models structures.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Michael Tokarev <mjt@tls.msk.ru>
CC: John Snow <jsnow@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The middle term goal is to move the BlockAcctStats structure in the device models.
(Capturing I/O accounting statistics in the device models is good for billing)
This patch make a small step in this direction by removing a reference to BDRV.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>i
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.
Also in scsi_bus_legacy_handle_cmdline, report the error when
initializing the if=scsi devices, before returning it, because in the
callee, error_report is changed to error_setg. And the callers don't
have the right locations (e.g. "-drive if=scsi").
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows us to pass error information to caller.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The callback lets the bus provide the direction and transfer count
for passthrough commands, enabling passthrough of vendor-specific
commands.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used for both scsi_block_new_request and the scsi-block
implementation of parse_cdb.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This makes scsi_command_name() public.
This makes use of scsi_command_name() in debug output for scsi-disk and
spapr-vscsi host bus adapter. Before this, SCSI used to print hex numbers
instead of human-friendly strings.
This adds GET_EVENT_STATUS_NOTIFICATION and READ_DISC_INFORMATION to
the list of SCSI commands supported by scsi_command_name().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes a bug in scsi_block_new_request() that was introduced
by commit 137745c5c6. If the host cache
is used - i.e. if BDRV_O_NOCACHE is _not_ set - the 'break' statement
needs to be executed to 'fall back' to SG_IO.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In scsi-disk.c, if you #define DEBUG_SCSI=1, you get:
hw/scsi/scsi-disk.c: In function 'scsi_disk_emulate_command':
hw/scsi/scsi-disk.c:2018: error: 'SCSIRequest' has no member named 'buf'
Change the debugging statement to match the actual value tested.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Remove the "scsi-block:" prefix for error messages as suggested
by Markus.
Improve the previous patch by making the message the same for both
scsi-block and scsi-generic, including the strerror() output in both
and making an explicit reference to SG_IO. Also s/can not/cannot/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More often it is that bdrv_ioctl fails due to not supported by driver or
whatever reason, in this case we should be specific, because "interface
too old" is very confusing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make a VM more convincing to my application, it's useful to be able
to add a port WWN and relative target port index to the descriptors
returned for VPD page 83h. Add device properties to allow setting
these, and return them from INQUIRY commands.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SCSI defines a status code for when a thin-provisioned LUNs would
exceed the allocated space, map ENOSPC to it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* bonzini/scsi-next:
scsi: Support TEST UNIT READY in the dummy LUN0
block: add .bdrv_reopen_prepare() stub for iscsi
virtio-scsi: Prevent assertion on missed events
virtio-scsi: Cleanup of I/Os that never started
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
Conflicts:
block/iscsi.c
aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The alignment field is now set to the value that is promised to the
guest, rather than required by the host. The next patches will make
QEMU aware of the host-provided values, so make this clear.
The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some emulated disk operations (MODE SELECT, UNMAP, WRITE SAME)
can trigger asynchronous I/Os. Provide the cancel_io callback
to ensure that AIOCBs are properly cleaned up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
[Tweak commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux prefers WRITE SAME to UNMAP if the limits are zero, and WRITE
SAME does not discard anything unless the device can guarantee that
the resulting block is zero.
Setting the maximum unmap block and descriptor counts to non-zero
makes Linux choose UNMAP and fixes thin provisioning on glusterfs.
While the maximum unmap block count can have some effect on performance,
the (suggested) maximum number of descriptors is not particularly
important so I didn't add a customization option. SCSI drivers are
used to online firmware updates so I'm not yet adding versioning support
for SCSI, but we're probably getting close to the point when it's worth
thinking about it.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VERIFY emulation was completely botched (and remained botched through
all the refactorings). The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet). Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ. In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the data to be written from the input buffer. If it is all zeroes,
we can use the write_zeroes call (possibly with the new MAY_UNMAP flag).
Otherwise, do as many write cycles as needed, writing 512k at a time.
Strictly speaking, this is still incorrect because a zero cluster should
only be written if the MAY_UNMAP flag is set. But this is a bug in qcow2
and the other formats, not in the SCSI code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since we report ANC_SUP==0 in VPD page B2h, we need to return
an error (ILLEGAL REQUEST/INVALID FIELD IN CDB) for all WRITE SAME
requests with ANCHOR==1.
Inspired by a similar patch to the LIO in-kernel target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the same that is already done for WRITE SAME.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a new SCSI_DISK_F_NO_REMOVABLE_DEVOPS feature. By this
feature we can set that the scsi-block (scsi pass-through) device will still
be removable from the guest side, but from monitor it cannot be removed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tray statuses should be also reset. Some guests may lock the tray and
right after resetting the guest it should be unlocked and closed. This
is done on power-on, reset and resume from suspend/hibernate on bare-metal.
This fix is already committed for IDE CD.
Check the commit a7f3d65b65.
Test results on bare-metal:
- on reset/power-on the CD-ROM tray is closed even before the monitor
is turned on
- on resume from suspend/hibernate the tray is also closed before
the monitor is turned on
From test results it seems that this behavior is OS and probably BIOS
independent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A verify command is not an actual read (we do not implement
compare mode) and thus does not have an AIOCB attached. Do
not crash in scsi_dma_complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
