tswapl() and bswaptls() are target-dependent and only used
by user emulation. Move their definitions to a new header:
"exec/user/tswap-target.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the various open_cpuinfo functions into new files.
Move the m68k open_hardware function as well.
All other guest architectures get a boilerplate empty file.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy each guest kernel's default value, then bound it
against reserved_va or the host address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide default values that are as close as possible to the
values used by the guest's kernel.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On linux user mode, CPUX86State::gdt::base from Different CPUX86State
Objects have same value, It is incorrect! Every CPUX86State::gdt::base
Must points to independent memory space.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1405
Signed-off-by: fanwenjie <fanwj@mail.ustc.edu.cn>
Message-Id: <4172b90.58b08.18631b77860.Coremail.fanwj@mail.ustc.edu.cn>
[lv: remove unnecessary casts, split overlong line]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When the emulation stops with a hard exception it's very useful for
debugging purposes to dump the current guest memory layout (for an
example see /proc/self/maps) beside the CPU registers.
The open_self_maps() function provides such a memory dump, but since
it's located in the syscall.c file, various changes (add #includes, make
this function externally visible, ...) are needed to be able to call it
from the existing EXCP_DUMP() macro.
This patch takes another approach by re-defining EXCP_DUMP() to call
target_exception_dump(), which is in syscall.c, consolidates the log
print functions and allows to add the call to dump the memory layout.
Beside a reduced code footprint, this approach keeps the changes across
the various callers minimal, and keeps EXCP_DUMP() highlighted as
important macro/function.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y1bzAWbw07WBKPxw@p100>
[lv: remove pc declaration and setting]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux can use FXSAVE to save/restore XMM registers even on 32-bit
systems. This requires some care in order to keep the FXSAVE area
aligned to 16 bytes; for this reason, get_sigframe is changed to
pass the offset into the FXSAVE area rather than the full frame
size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Linux moved the 32-bit fpstate towards the end of the
frame, so that the variable-sized xsave data does not overwrite the
(ABI-defined) extramask[] field. Follow suit in QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide MADV_* definitions using target_mman.h header, similar to what
kernel does. Most architectures use the same values, with the exception
of alpha and hppa.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 'qemu64' CPU model implements the least featureful x86_64 CPU that's
possible. Historically this hasn't been an issue since it was rare for
OS distros to build with a higher mandatory CPU baseline.
With RHEL-9, however, the entire distro is built for the x86_64-v2 ABI
baseline:
https://developers.redhat.com/blog/2021/01/05/building-red-hat-enterprise-linux-9-for-the-x86-64-v2-microarchitecture-level
It is likely that other distros may take similar steps in the not too
distant future. For example, it has been suggested for Fedora on a
number of occasions.
This new baseline is not compatible with the qemu64 CPU model though.
While it is possible to pass a '-cpu xxx' flag to qemu-x86_64, the
usage of QEMU doesn't always allow for this. For example, the args
are typically controlled via binfmt rules that the user has no ability
to change. This impacts users who are trying to use podman on aarch64
platforms, to run containers with x86_64 content. There's no arg to
podman that can be used to change the qemu-x86_64 args, and a non-root
user of podman can not change binfmt rules without elevating privileges:
https://github.com/containers/podman/issues/15456#issuecomment-1228210973
Changing to the 'max' CPU model gives 'qemu-x86_64' maximum
compatibility with binaries it is likely to encounter in the wild,
and not likely to have a significant downside for existing usage.
Most other architectures already use an 'any' CPU model, which is
often mapped to 'max' (or similar) already, rather than the oldest
possible CPU model.
For the sake of consistency the 'i386' architecture is also changed
from using 'qemu32' to 'max'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220923110413.70593-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reduce the number of ifdefs within cpu_loop().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This has been a fixme for some time. The effect of
returning -EFAULT from the kernel code is to raise SIGSEGV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.
Note that x86_64 does not use this code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split out the mmap prototypes into a new header user-mmap.h
which we only include where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
setup_rt_frame() passes siginfo and ucontext host addresses to guest
signal handlers, causing problems when e.g. emulating x86_64 on s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803171858.148394-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provide both tagged and untagged versions of access_ok.
In a few places use thread_cpu, as the user is several
callees removed from do_syscall1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces a generic 'termbits.h' file for following
archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2',
'openrisc', 'riscv', 's390x', 'x86_64'.
Since all of these archs have the same termios flag values and
same ioctl_tty numbers, there is no need for a separate 'termbits.h'
file for each one of them. For that reason one generic 'termbits.h'
file was added for all of them and an '#include' directive was
added for this generic file in every arch 'termbits.h' file.
Also, some of the flag values that were missing were added in this
generic file so that it matches the generic 'termibts.h' and 'ioctls.h'
files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Notice the magic page during translate, much like we already
do for the arm32 commpage. At runtime, raise an exception to
return cpu_loop for emulation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a bit tidier than open-coding the 5 lines necessary
to initialize the target_siginfo_t. In addition, this zeros
the remaining bytes of the target_siginfo_t, rather than
passing in garbage.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
