This patch removes the mutex by using fancy lock-free manipulation of
the pool. Lock-free stacks and queues are not hard, but they can suffer
from the ABA problem so they are better avoided unless you have some
deferred reclamation scheme like RCU. Otherwise you have to stick
with adding to a list, and emptying it completely. This is what this
patch does, by coupling a lock-free global list of available coroutines
with per-CPU lists that are actually used on coroutine creation.
Whenever the destruction pool is big enough, the next thread that runs
out of coroutines will steal the whole destruction pool. This is positive
in two ways:
1) the allocation does not have to do any atomic operation in the fast
path, it's entirely using thread-local storage. Once every POOL_BATCH_SIZE
allocations it will do a single atomic_xchg. Release does an atomic_cmpxchg
loop, that hopefully doesn't cause any starvation, and an atomic_inc.
A later patch will also remove atomic operations from the release path,
and try to avoid the atomic_xchg altogether---succeeding in doing so if
all devices either use ioeventfd or are not submitting requests actively.
2) in theory this should be completely adaptive. The number of coroutines
around should be a little more than POOL_BATCH_SIZE * number of allocating
threads; so this also empties qemu_coroutine_adjust_pool_size. (The previous
pool size was POOL_BATCH_SIZE * number of block backends, so it was a bit
more generous. But if you actually have many high-iodepth disks, it's better
to put them in different iothreads, which will also use separate thread
pools and aio=native file descriptors).
This speeds up perf/cost (in tests/test-coroutine) by a factor of ~1.33.
No matter if we end with some kind of coroutine bypass scheme or not,
it cannot hurt to optimize hot code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These operations are trivial to implement and do not have ABA problems.
They are enough to implement simple multiple-producer, single consumer
lock-free lists or, as in the next patch, the multiple consumers can
steal a whole batch of elements and process them at their leisure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
unsigned long is not large enough to represent 1000000000 * duration there.
Just use floating point.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Destructors are the main additional feature of pthread TLS compared
to __thread. If we were using C++ (hint, hint!) we could have used
thread-local objects with a destructor. Since we are not, instead,
we add a simple Notifier-based API.
Note that the notifier must be per-thread as well. We can add a
global list as well later, perhaps.
The Win32 implementation has some complications because a) detached
threads used not to have a QemuThreadData; b) the main thread does
not go through win32_start_routine, so we have to use atexit too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ELF thread local storage is about 10% faster on tests/test-coroutine's
perf/cost test. The timing on my machine is 190ns per iteration with
pthread TLS, 170 with ELF TLS.
Based on a patch by Kevin Wolf and Peter Lieven, but redone to follow
the model of coroutine-win32.c (including the important "noinline"
attribute!).
Platforms without thread-local storage (OpenBSD probably?) will need
a new-enough GCC for this to compile, in order to use the same emutls
support that Windows already relies on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If I understand correctly, qemu-iotests never meant to be portable. We
only support Linux for all the shell cases, but didn't specify it for
python tests. Now add this and default all the python tests as Linux
only. If we cares enough later, we can override the parameter in
individual cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Other cases have this, and this test is not portable as well, as we want
to add "make check-block" to "make check", it shouldn't fail on Mac OS
X.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The former is not portable because on Mac OSX it is /usr/bin/true.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the 'xl pci-attach $DomU $BDF' command to attach more than
one PCI devices to the guest, then detach the devices with
'xl pci-detach $DomU $BDF', after that, re-attach these PCI
devices again, an error message will be reported like following:
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: receive
an error message from QMP server: Duplicate ID 'pci-pt-03_10.1'
for device.
If using the 'address_space_memory' as the parameter of
'memory_listener_register', 'xen_pt_region_del' will not be called
if the memory region's name is not 'xen-pci-pt-*' when the devices
is detached. This will cause the device's related QemuOpts object
not be released properly.
Using the device's address space can avoid such issue, because the
calling count of 'xen_pt_region_add' when attaching and the calling
count of 'xen_pt_region_del' when detaching is the same, so all the
memory region ref and unref by the 'xen_pt_region_add' and
'xen_pt_region_del' can be released properly.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Longtao Pang <longtaox.pang@intel.com>
The allocator in malloc-pc has been extracted, so it can be used in every arch.
This operation showed that both the alloc and free functions can be also
generic.
Because of this, the QGuestAllocator has been removed from is function to wrap
the alloc and free function, and now just contains the allocator parameters.
As a result, only the allocator initalizer and unitializer are arch dependent.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because of wrong return value of .save_live_pending() in
migration/block.c, migration finishes before the whole disk is
transferred. Such situation occurs when the migration process is fast
enough, for example when source and dest are on the same host.
If in the bulk phase we return something < max_size, we will skip
transferring the tail of the device. Currently we have "set pending to
BLOCK_SIZE if it is zero" for bulk phase, but there no guarantee, that
it will be < max_size.
True approach is to return, for example, max_size+1 when we are in the
bulk phase.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
Message-id: 1419933856-4018-2-git-send-email-vsementsov@parallels.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter out the "main loop: WARNING: I/O thread spun for..." warning from
qemu output (it hardly matters for code specifically testing I/O).
Furthermore, use _filter_qemu in all the custom functions which run
qemu.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mirror and migration use dirty bitmaps for their purposes, and since
commit [block: per caller dirty bitmap] they use their own bitmaps, not
the global one. But they use old functions bdrv_set_dirty and
bdrv_reset_dirty, which change all dirty bitmaps.
Named dirty bitmaps series by Fam and Snow are affected: mirroring and
migration will spoil all (not related to this mirroring or migration)
named dirty bitmaps.
This patch fixes this by adding bdrv_set_dirty_bitmap and
bdrv_reset_dirty_bitmap, which change concrete bitmap. Also, to prevent
such mistakes in future, old functions bdrv_(set,reset)_dirty are made
static, for internal block usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
CC: John Snow <jsnow@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417081246-3593-1-git-send-email-vsementsov@parallels.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes, qemu does not have a filename to work with, so it does not
know which directory to use for a backing file specified by a relative
filename. Add a test which tests that qemu exits with an appropriate
error message.
Additionally, add a test for qemu-img create with a backing filename
relative to the backed image's base directory while omitting the image
size.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a vmdk image is created with a backing file, it is opened to check
whether it is indeed a vmdk file by letting qemu probe it. When doing
so, the backing filename is relative to the image's base directory so it
should be interpreted accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Relative backing filenames are always relative to the backed image's
directory; the same applies to image creation. Therefore, if the backing
file has to be opened for determining its size (in case the size has not
been explicitly specified) its filename should be interpreted relative
to the new image's base directory and not relative to qemu's working
directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using a relative backing file name, qemu needs to know the
directory of the top image file. For JSON filenames, such a directory
cannot be easily determined (e.g. how do you determine the directory of
a qcow2 BDS directly on top of a quorum BDS?). Therefore, do not allow
relative filenames for the backing file of BDSs only having a JSON
filename.
Furthermore, BDS::exact_filename should be used whenever possible. If
BDS::filename is not equal to BDS::exact_filename, the former will
always be a JSON object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce bdrv_get_full_backing_filename_from_filename(), a function
which takes the name of the backed file and a potentially relative
backing filename to produce the full (absolute) backing filename.
Use this function from bdrv_get_full_backing_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CODING_STYLE states the following about braces around blocks:
> The opening brace is on the line that contains the control flow
> statement that introduces the new block; [...]
This is obviously impossible with multi-line conditions. Therefore,
CODING_STYLE does not make any clear statement about where to put the
opening brace after a multi-line condition.
There is a reason to prefer to place the opening brace on an own line
after such a condition while still placing it on the same line as the
"control flow statement" if possible; that reason is that the last line
of a multi-line condition is indented, in the case of "if", it is often
indented by four spaces, just as much as the first statement in the
block will be indented. This is hard to read as there is no clearly
visible distinction between condition and block. Placing the opening
brace on a separate line solves this issue.
Also, there are cases where placing the opening brace on a separate line
is the only viable option; if the previous line had nearly 80 characters
and splitting it is not desirable, the opening brace is naturally placed
on an own line.
This patch fixes checkpatch.pl to not complain about braces on own lines
if the condition introducing the block spanned more than one line, or if
the previous line had 79 or 80 characters.
Furthermore, the warning about not having braces around a block is fixed
to mind braces not being on the last line of the condition.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This saves about 15% of the clock cycles spent on allocation. Using the
slice allocator does not add a visible improvement; allocation is faster
than malloc, while freeing seems to be slower.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most reads do not go past the end of the file, and they can use the
input QEMUIOVector instead of creating one. This removes the
qemu_iovec_* functions from the profile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AioContext can be accessed recursively, in fact that's what we do with
aio_poll. Marking the GSource as recursive avoids that GLib blocks it
and unblocks it around every call to aio_dispatch, which is a pretty
expensive operation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using /tmp, which is usually mounted as tmpfs, the quick group can be
quicker.
On my laptop (Lenovo T430s with Fedora 20), this reduces the time from
50s to 30s.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJUs6GdAAoJEJykq7OBq3PISysH/RrB2GTwdBSKlivDdUbV6xgi
ak0Vnv3k9eiHTD0auJDGqgtC+DhP9AxOZTnN2GjKTCE55vhkYXgSqHLqLgQakkND
NhnUNcmZeW0fehd/QA8HGcaXukJhZKEG2MlNhFSmC1L8yK7wyXgIB6KBS5vLPfNw
yy3uujmZJW/MbR6eUvugGB6TdrX7dAvogjP7H6N7Bbp4RpQrh5Wp5zVVVbgLvEtX
6aGqfol5kTurtuZ2lxFfovO/fiwQ1BErFLbqXauUO0bTqKIXlWY3Xwgu3JLRfMw/
0EfW7ZTducz0RoWfalCanh+d0+uHEZgwTZaaeOVBslNnGk1u4A2cYIqJjr1QVAc=
=7/Iy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Mon 12 Jan 2015 10:27:41 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
hw/net/xen_nic.c: Set 'netdev->mac' to NULL after free it
hw/net/xen_nic.c: Need free 'netdev->nic' in net_free() instead of net_disconnect()
hw/net/xen_nic.c: Free 'netdev->txs' when map 'netdev->rxs' fails
net: remove all cleanup methods from NIC NetClientInfos
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since net_init() checks whether 'netdev->mac' is NULL, before alloc it;
net_release() also need set 'netdev->mac' to NULL after free it.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
net_init() and net_free() are pairs, net_connect() and net_disconnect()
are pairs. net_init() creates 'netdev->nic', so also need free it in
net_free().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When map 'netdev->rxs' fails, need free the original resource, or will
cause resource leak.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All NICs have a cleanup function that, in most cases, zeroes the pointer
to the NICState. In some cases, it frees data belonging to the NIC.
However, this function is never called except when exiting from QEMU.
It is not necessary to NULL pointers and free data here; the right place
to do that would be in the device's unrealize function, after calling
qemu_del_nic. Zeroing the NIC multiple times is also wrong for multiqueue
devices.
This cleanup function gets in the way of making the NetClientStates for
the NIC hold an object_ref reference to the object, so get rid of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Highlight is support for PCI devices on s390x. Otherwise, performance
improvements (register sync) and small cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=WEEj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150112-v3' into staging
s390x patches for 2.3.
Highlight is support for PCI devices on s390x. Otherwise, performance
improvements (register sync) and small cleanups.
# gpg: Signature made Mon 12 Jan 2015 09:49:31 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150112-v3:
kvm: extend kvm_irqchip_add_msi_route to work on s390
s390: implement pci instructions
s390: Add PCI bus support
s390x/kvm: avoid syscalls by syncing registers with kvm_run
s390x/kvm: sync register support helper function
s390x/css: Clean up unnecessary CONFIG_USER_ONLY wrappers
s390x/ccw: fix oddity in machine class init
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch implements the s390 pci instructions in qemu. It allows
to access and drive pci devices attached to the s390 pci bus.
Because of platform constrains devices using IO BARs are not
supported. Also a device has to support MSI/MSI-X to run on s390.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We can avoid loads of syscalls when dropping to user space by storing the values
of more registers directly within kvm_run.
Support is added for:
- ARCH0: CPU timer, clock comparator, TOD programmable register,
guest breaking-event register, program parameter
- PFAULT: pfault parameters (token, select, compare)
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's unify the code to sync registers by moving the checks into a helper
function can_sync_regs().
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The css functions are only used from ioinst.c and other files that are
only built for CONFIG_SOFTMMU. So we do not need the dummy wrappers for
the CONFIG_USER_ONLY target in the cpu.h header.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
ccw_machine_class_init() uses ',' instead of ';' while initializing
the class' fields. This is almost certainly a copy/paste error and,
while legal C, rather on the unusual side. Just use ';' everywhere.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This makes ROM blocks resizeable. This infrastructure is required for other
functionality we have queued.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUrme8AAoJECgfDbjSjVRpqmEH/1APnrphAi/CM6rxf2hPyvWj
f5yQDNXfeGxrHaW5vux6DvgHUkTng6KGBxz6XMSiwul6MeyRFNDqwbfMhSHjiIum
QkT//jqb5xux60kyTLXuIBTPok1SsKDtaTxbvZb0VmZrnkdYeI2CLa1Mq3cQUY0a
8DKnchQEM5lic9bxj+OuLiDFx8QYaMpQlUP9iIvNq6GjX+0zNsWvfPtkMTm00t93
lHKPvD2eVmrgfS5g+lkAwLDahLSjqwDc0YuLABOgDUFsZFz9GAUCHSpt0y8HEBwR
1NhGCfbnyyRl/1OSULtARGQ4Ddwm5dn1i5I4usoP5rLFS7FV5F7xhBu0IZlwgVA=
=pFmm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: resizeable ROM blocks
This makes ROM blocks resizeable. This infrastructure is required for other
functionality we have queued.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jan 2015 11:19:24 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi-build: make ROMs RAM blocks resizeable
memory: API to allocate resizeable RAM MR
arch_init: support resizing on incoming migration
exec: qemu_ram_alloc_resizeable, qemu_ram_resize
exec: split length -> used_length/max_length
exec: cpu_physical_memory_set/clear_dirty_range
memory: add memory_region_set_size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New year's release. This time's highlights:
- E500: More RAM support
- pseries: New SLOF release
- Migration fixes
- Simplify USB spawning logic, removes support for explicit usb=off
- TCG: Simple untansactional TM emulation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=28q1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2015-01-07
New year's release. This time's highlights:
- E500: More RAM support
- pseries: New SLOF release
- Migration fixes
- Simplify USB spawning logic, removes support for explicit usb=off
- TCG: Simple untansactional TM emulation
# gpg: Signature made Wed 07 Jan 2015 15:19:37 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (37 commits)
hw/ppc/mac_newworld: simplify usb controller creation logic
hw/ppc/spapr: simplify usb controller creation logic
hw/ppc/mac_newworld: QOMified mac99 machines
hw/usb: simplified usb_enabled
hw/machine: added machine_usb wrapper
hw/ppc: modified the condition for usb controllers to be created for some ppc machines
target-ppc: Cast ssize_t to size_t before printing with %zx
target-ppc: Mark SR() and gen_sync_exception() as !CONFIG_USER_ONLY
PPC: e500: Fix GPIO controller interrupt number
target-ppc: Introduce Privileged TM Noops
target-ppc: Introduce tcheck
target-ppc: Introduce TM Noops
target-ppc: Introduce tbegin
target-ppc: Introduce TEXASRU Bit Fields
target-ppc: Power8 Supports Transactional Memory
target-ppc: Introduce tm_enabled Bit to CPU State
target-ppc: Introduce Feature Flag for Transactional Memory
target-ppc: Introduce Instruction Type for Transactional Memory
pseries: Update SLOF firmware image to 20141202
PPC: Fix crash on spapr_tce_table_finalize()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU tries to change the "threads" option even if it was explicitly set
in the command-line, and it shouldn't do that.
The right thing to do when all options (cpus, sockets, cores, threds)
are explicitly set is to sanity check them and abort in case they don't
make sense (i.e. when sockets*cores*threads < cpus).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should confirm max_cpus, which is >= smp_cpus, is
<= the machine's true max_cpus, not just smp_cpus.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just a coding style change, to make other changes easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
