Commit Graph

35 Commits

Author SHA1 Message Date
Peter Maydell 74c21bd074 target-arm: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
2016-01-18 16:33:32 +00:00
Paolo Bonzini 15eafc2e60 kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:

    1.) The PIC, PIT, and IOAPIC are implemented in userspace while
    the LAPIC is implemented by KVM.

    2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
    kvm_set_irq. Interrupt delivery is configured via the MSI routing
    table, for which routes are reserved in target-i386/kvm.c then
    configured in hw/intc/ioapic.c

    3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
    which is handled in target-i386/kvm.c and relayed to the software
    IOAPIC via ioapic_eoi_broadcast.

Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Alex Bennée e4482ab7e3 target-arm: kvm - add support for HW assisted debug
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.

The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée 2ecb2027bc target-arm: kvm - implement software breakpoints
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.

All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Pavel Fedin dc9f06ca81 kvm: Pass PCI device pointer to MSI routing functions
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.

This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.

x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:13:07 +02:00
Pavel Fedin 34e85cd917 arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
This allows us to use different GIC types from v2. There are no kernels
which could advertise KVM_CAP_DEVICE_CTRL without the actual ability to
create GIC with it.

GIC version probe code moved to kvm_arm_vgic_probe() which will be used
later.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 015f4d9e4a8a50dfbdd734c4730558e24a69c6dc.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-24 01:29:37 +01:00
Christoffer Dall 4b7a6bf402 target-arm: kvm: Differentiate registers based on write-back levels
Some registers like the CNTVCT register should only be written to the
kernel as part of machine initialization or on vmload operations, but
never during runtime, as this can potentially make time go backwards or
create inconsistent time observations between VCPUs.

Introduce a list of registers that should not be written back at runtime
and check this list on syncing the register state to the KVM state.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1437046488-10773-1-git-send-email-christoffer.dall@linaro.org
[PMM: tweaked a few comments, added the new argument to the stub
 write_list_to_kvmstate() in target-arm/kvm-stub.c]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-21 11:18:45 +01:00
Eric Auger 1850b6b7d0 kvm: introduce kvm_arch_msi_data_to_gsi
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Paolo Bonzini 4c66375252 kvm: add support for memory transaction attributes
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30 16:55:32 +02:00
Alex Bennée 1a1753f747 target-arm: kvm: save/restore mp state
This adds the saving and restore of the current Multi-Processing state
of the machine. While the KVM_GET/SET_MP_STATE API exposes a number of
potential states for x86 we only use two for ARM. Either the process is
running or not. We then save this state into the cpu_powered TCG state
to avoid changing the serialisation format.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-01 17:57:30 +01:00
Marcel Apfelbaum b16565b396 kvm: add machine state to kvm_arch_init
Needed to query machine's properties.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11 18:16:17 +01:00
Frank Blaschka 9e03a0405d kvm: extend kvm_irqchip_add_msi_route to work on s390
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
Christoffer Dall 25f2895e0e target-arm: Check error conditions on kvm_arm_reset_vcpu
When resetting a VCPU we currently call both kvm_arm_vcpu_init() and
write_kvmstate_to_list(), both of which can fail, but we never check the
return value.

The only choice here is to print an error an exit if the calls fail.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418039630-11773-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 12:07:53 +00:00
Alex Bennée 38df27c8a7 target-arm/kvm: make reg sync code common between kvm32/64
Before we launch a guest we query KVM for the list of "co-processor"
registers it knows about. This is used to synchronize system
register state for the bulk of coprocessor/system registers.
Move this code from the 32-bit specific vcpu init function into
a common routine and call it also from the 64-bit vcpu init.

This allows system registers to migrate correctly when using
KVM, and also permits QEMU code to see the current KVM register
state (which will be needed to support big-endian guests, since
the virtio endianness callback must check for some system register
settings).

Since vcpu reset also has to sync registers, we move the
32 bit kvm_arm_reset_vcpu() into common code as well and
share it with the 64 bit version.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: just copy the 32-bit code rather than improving it along the way;
 don't share reg_syncs_via_tuple_list() between 32 and 64 bit;
 tweak function names; move reset]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 12:07:53 +00:00
Pranavkumar Sawargaonkar 228d5e048b target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64
Introduce a common kvm_arm_vcpu_init() for doing KVM_ARM_VCPU_INIT
ioctl in KVM ARM and KVM ARM64. This also helps us factor-out few
common code lines from kvm_arch_init_vcpu() for KVM ARM/ARM64.

Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402901605-24551-5-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19 18:33:02 +01:00
Christoffer Dall 1da41cc1c6 arm: vgic device control api support
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.

Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API).  If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time.  If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00
Mian M. Hamayun 26861c7ce0 target-arm: Add minimal KVM AArch64 support
Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
 * CPU initialization
 * minimal get/put register functions which only handle the
   basic state of the CPU

Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
 * code lives in kvm64.c rather than using #ifdefs
 * support '-cpu host' rather than implicitly using whatever the
   host's CPU is regardless of what the user requests
 * fix bug attempting to get/set nonexistent X[31]
 * fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17 19:42:30 +00:00
Peter Maydell b197ebd410 target-arm/kvm: Split 32 bit only code into its own file
Split ARM KVM support code which is 32 bit specific out into its
own file, which we only compile on 32 bit hosts. This will give
us a place to add the 64 bit support code without adding lots of
ifdefs to kvm.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17 19:42:29 +00:00
Peter Maydell a96c0514ab target-arm: Provide '-cpu host' when running KVM
Implement '-cpu host' for ARM when we're using KVM, broadly
in line with other KVM-supporting architectures.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-11-git-send-email-peter.maydell@linaro.org
2013-12-10 13:28:49 +00:00
Peter Maydell 3541addc88 target-arm: Don't hardcode KVM target CPU to be A15
Instead of assuming that a KVM target CPU must always be a
Cortex-A15 and hardcoding this in kvm_arch_init_vcpu(),
store the KVM_ARM_TARGET_* value in the ARMCPU class,
and use that.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-10-git-send-email-peter.maydell@linaro.org
2013-12-10 13:28:49 +00:00
Peter Maydell 5de164304a target-arm: Allow secondary KVM CPUs to be booted via PSCI
New ARM boards are generally expected to boot their secondary CPUs
via the PSCI interface, rather than ad-hoc "loop around in holding
pen code" as hw/arm/boot.c implements. In particular this is
necessary for mach-virt kernels. For KVM we achieve this by creating
the VCPUs with a feature flag marking them as starting in PSCI
powered-down state; the guest kernel will then make a PSCI call
(implemented in the host kernel) to start the secondaries at
an address of its choosing once it has got the primary CPU up.

Implement this setting of the feature flag, controlled by a
qdev property for ARMCPU, which board code can set if it is a
PSCI system.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
2013-12-10 13:28:30 +00:00
Peter Maydell 72b0cd35ad target-arm: Provide mechanism for getting KVM constants even if not CONFIG_KVM
There are a number of places where it would be convenient for ARM
code to have working definitions of KVM constants even in code
which is compiled with CONFIG_KVM not set. In this situation we
can't simply include the kernel KVM headers (which might conflict
with host header definitions or not even compile on the compiler
we're using) so we have to redefine equivalent constants.
Provide a mechanism for doing this and checking that the values
match, and use it for the constants we're currently exposing
via an ad-hoc mechanism.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org
2013-12-10 13:28:29 +00:00
Alvise Rigo 0bc2a331e4 target-arm: fix sorting issue of KVM cpreg list
The compare_u64 function was not sorting the KVM cpreg_list in the
right way due to the wrong returned value.  Since we are comparing
two 64bit values we can't simply return their difference if the
returned type is int.

Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1381513125-26802-2-git-send-email-a.rigo@virtualopensystems.com
[PMM: fixed coding style, indent and commit message formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-31 14:00:16 +01:00
Paolo Bonzini dfde4e6e1a memory: add ref/unref calls
Add ref/unref calls at the following places:

- places where memory regions are stashed by a listener and
  used outside the BQL (including in Xen or KVM).

- memory_region_find callsites

- creation of aliases and containers (only the aliased/contained
  region gets a reference to avoid loops)

- around calls to del_subregion/add_subregion, where the region
  could disappear after the first call

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Peter Maydell f7134d963d target-arm: Use tuple list to sync cp regs with KVM
Use the tuple list of cp registers for syncing KVM state to QEMU,
rather than only syncing a very minimal set by hand.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-25 18:16:10 +01:00
Peter Maydell 2d8e5a0e25 target-arm: Reinitialize all KVM VCPU registers on reset
Since the ARM KVM API doesn't include a "reset this VCPU"
ioctl, we have to capture the initial values of every
register it knows about so that we can reset the VCPU
by feeding those values back again.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-25 18:16:10 +01:00
Peter Maydell ff047453f5 target-arm: Initialize cpreg list from KVM when using KVM
When using KVM, use the kernel's initial state to set up the
cpreg list, and sync to and from the kernel when doing
migration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-25 18:16:10 +01:00
Peter Maydell 721fae1253 target-arm: Convert TCG to using (index,value) list for cp migration
Convert the TCG ARM target to using an (index,value) list for migrating
coprocessors. The primary benefit of the (index,value) list is for
passing state between KVM and QEMU, but it works for TCG-to-TCG
migration as well and is a useful self-contained first step.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-25 18:16:10 +01:00
Alexey Kardashevskiy b3a1c626fc KVM: ARM: Add dummy kvm_arch_init_irq_routing()
The common KVM code insists on calling kvm_arch_init_irq_routing()
as soon as it sees kernel header support for it (regardless of whether
QEMU supports it).  Provide a dummy function to satisfy this.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-12 13:19:10 +04:00
Peter Maydell 536f25e4c7 target-arm: Fix incorrect check of kvm_vcpu_ioctl return value
kvm_vcpu_ioctl() returns -ETHING on error, not ETHING -- correct
an incorrect check in kvm_arch_init_vcpu(). This would not have
had any significant ill-effects -- we would just have propagated
the less useful ENOENT up to the caller rather than the more
accurate EINVAL in the unlikely case that the kernel didn't
have VFP-D32 support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-05-03 18:47:22 +01:00
Peter Maydell bd2be15003 arm: fix location of some include files
The recent rearrangement of include files had some minor errors:
 devices.h is not ARM specific and should not be in arm/
 arm.h should be in arm/

Move these two headers to correct this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:01 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Peter Maydell eb035b48d5 target-arm: Use MemoryListener to identify GIC base address for KVM
When using an in-kernel GIC with KVM, we need to tell the kernel where
the GIC's memory mapped registers live. Do this by registering a
MemoryListener which tracks where the board model maps the A15's
private peripherals, so we can finish the GIC initialisation
when the GIC is actually mapped.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 00:45:25 +00:00
Peter Maydell 81635574f6 ARM KVM: save and load VFP registers from kernel
Add support for saving and restoring VFP register state from the
kernel. This includes a check that the KVM-created CPU has full
VFP support (as the TCG Cortex-A15 model always does), since for
the moment ARM QEMU doesn't have any way to tweak optional features
on created CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 00:45:13 +00:00
Christoffer Dall 494b00c76a ARM: KVM: Add support for KVM on ARM architecture
Add basic support for KVM on ARM architecture.

Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 00:45:06 +00:00