Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current implementation of bcm2835_thermal_ops sets
impl.max_access_size and valid.min_access_size to 4, but leaves
impl.min_access_size and valid.max_access_size unset, defaulting to 1.
This causes issues when the memory system is presented with an access
of size 2 at an offset of 3, leading to an attempt to synthesize it as
a pair of byte accesses at offsets 3 and 4, which trips an assert.
Additionally, the lack of valid.max_access_size setting causes another
issue: the memory system tries to synthesize a read using a 4-byte
access at offset 3 even though the device doesn't allow unaligned
accesses.
This patch addresses these issues by explicitly setting both
impl.min_access_size and valid.max_access_size to 4, ensuring proper
handling of access sizes.
Error log:
ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Bail out! ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Aborted
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine raspi3b -m 1G -qtest stdio
readw 0x3f212003
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240702154042.3018932-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In pl011_get_baudrate(), when we calculate the baudrate we can
accidentally divide by zero. This happens because although (as the
specification requires) we treat UARTIBRD = 0 as invalid, we aren't
correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit
ranges the hardware allows, and so some non-zero values of UARTIBRD can
result in a zero divisor.
Enforce the correct register field widths on guest writes and on inbound
migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address 0x55f72629b348
(pc 0x55f72629b348 bp 0x7fffa24d0e00 sp 0x7fffa24d0d60 T0)
#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17
#1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33
#2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio
writeq 0x1000b024 0xf8000000
EOF
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240702155752.3022007-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* support AST2700 network
-----BEGIN PGP SIGNATURE-----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=UygB
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu into staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_display_edid_init() can fail for many reasons and return silently.
It would be good to report the error.
Old mdev driver may not support vfio edid region and we allow to go
through in this case.
vfio_display_edid_update() isn't changed because it can be called at
runtime when UI changes (i.e. window resize).
Fixes: 08479114b0 ("vfio/display: add edid support.")
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
EDID related device region info is leaked in vfio_display_edid_init()
error path and VFIODisplay destroying path.
Fixes: 08479114b0 ("vfio/display: add edid support.")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device
assignment"), in case of bypass mode, we transiently enabled the
IOMMU MR to allow the set_page_size_mask() to be called and pass
information about the page size mask constraint of cold plugged
VFIO devices. Now we do not use the IOMMU MR callback anymore, we
can just get rid of this hack.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the Host IOMMU Device page size mask when this latter is set.
This allows to get the information much sooner than when relying on
IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR
gets enabled. We introduce check_page_size_mask() helper whose code
is inherited from current virtio_iommu_set_page_size_mask()
implementation. This callback will be removed in a subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
In case no IOMMUPciBus/IOMMUDevice are found we need to properly
set the error handle and return.
Fixes : Coverity CID 1549006
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
According to the w25q01jv datasheet at page 16,
it is required to set QE bit in "Status Register 2".
Besides, users are able to utilize "Write Status Register 1(0x01)"
command to set QE bit in "Status Register 2" and
utilize "Read Status Register 2(0x35)" command to get the QE bit status.
To support quad mode for w25q01jvq, update collecting data needed
2 bytes for WRSR command in decode_new_cmd function and
verify QE bit at the second byte of collecting data bit 2
in complete_collecting_data.
Update RDCR_EQIO command to set bit 2 of return data
if quad mode enable in decode_new_cmd.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set dma64 property for ftgmac100 model to support
64bits dram address DMA.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "TXDES 2" and "RXDES 2" to save the high part
physical address of packet buffer.
Ex: TX packet buffer address [34:0]
The "TXDES 2" bits [18:16] which corresponds the bits [34:32]
of the 64 bits address of the TX packet buffer address
and "TXDES 3" bits [31:0] which corresponds the bits [31:0]
of the 64 bits address of the TX packet buffer address.
Update TX and RX packet buffers address type to
64 bits for dram 64 bits address DMA support.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In order to keep eMMC model simpler to maintain,
extract common properties and the common code from
class_init to the (internal) TYPE_SDMMC_COMMON.
Update the corresponding QOM cast macros.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-6-philmd@linaro.org>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
So far eMMC will only use sd_sleep_state, but
all all states specified for completeness.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-81-philmd@linaro.org>
Some commands expect less than BLOCK_LENGTH.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-80-philmd@linaro.org>
All read/write on DAT lines are explicitly handled.
Reaching this point would be a programming error:
replace by an assertion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-79-philmd@linaro.org>
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-78-philmd@linaro.org>
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-77-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Handle as RAZ/WI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-3-philmd@linaro.org>
The correct command name is 'SD SEND_OP_COND',
rename accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-4-philmd@linaro.org>
Recent SDHCI expect cards to support the v3.01 spec
to negociate lower I/O voltage. Select it by default.
Versioned machine types with a version of 9.0 or
earlier retain the old default (spec v2.00).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-2-philmd@linaro.org>
Rather than using the obscure 0x4567 magic value,
use a real random one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-5-philmd@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-3-philmd@linaro.org>
Calling qemu_plugin_vcpu_init__async() on the vCPU thread
is a detail of plugins, not relevant to TCG vCPU management.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-30-alex.bennee@linaro.org>
cpu::plugin_state is allocated in cpu_common_initfn() when
the vCPU state is created. Release it in cpu_common_finalize()
when we are done.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-29-alex.bennee@linaro.org>
Really the problem here is the return values of fit_load_[kernel|fdt]() are a
little all over the place. However we don't want to somehow get
through not having set kernel_end and having it just be random unused
data.
The compiler complained on an --enable-gcov build:
In file included from ../../hw/core/loader-fit.c:20:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h: In function ‘load_fit’:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h:486:45: error: ‘kernel_end’ may be used uninitialized [-Werror=maybe-uninitialized]
486 | #define ROUND_UP(n, d) ROUND_DOWN((n) + (d) - 1, (d))
| ^
../../hw/core/loader-fit.c:270:12: note: ‘kernel_end’ was declared here
270 | hwaddr kernel_end;
| ^~~~~~~~~~
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Rikalo <arikalo@gmail.com>
Message-Id: <20240705084047.857176-5-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
romsize is an uint32_t variable. Specifying -1 as an uint32_t value is
obscure way to denote UINT32_MAX.
Worse, if int is wider than 32-bit, it will change the behavior of a
construct like the following:
romsize = -1;
if (romsize != -1) {
...
}
When -1 is assigned to romsize, -1 will be implicitly casted into
uint32_t, resulting in UINT32_MAX. On contrary, when evaluating
romsize != -1, romsize will be casted into int, and it will be a
comparison of UINT32_MAX and -1, and result in false.
Replace -1 with UINT32_MAX for statements involving the variable to
clarify the intent and prevent potential breakage.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240627-reuse-v10-10-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-9-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-8-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Release VFs failed to realize just as we do in unregister_vfs().
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-7-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-6-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-4-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-3-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF or it is powered off, and
hidden from the guest.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-2-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When a VFIO device is hoplugged in a VM using virtio-iommu, IOMMUPciBus
and IOMMUDevice cache entries are created in the .get_address_space()
handler of the machine IOMMU device. However, these entries are never
destroyed, not even when the VFIO device is detached from the machine.
This can lead to an assert if the device is reattached again.
When reattached, the .get_address_space() handler reuses an
IOMMUDevice entry allocated when the VFIO device was first attached.
virtio_iommu_set_host_iova_ranges() is called later on from the
.set_iommu_device() handler an fails with an assert on 'probe_done'
because the device appears to have been already probed when this is
not the case.
The IOMMUDevice entry is allocated in pci_device_iommu_address_space()
called from under vfio_realize(), the VFIO PCI realize handler. Since
pci_device_unset_iommu_device() is called from vfio_exitfn(), a sub
function of the PCIDevice unrealize() handler, it seems that the
.unset_iommu_device() handler is the best place to release resources
allocated at realize time. Clear the IOMMUDevice cache entry there to
fix hotplug.
Fixes: 817ef10da2 ("virtio-iommu: Implement set|unset]_iommu_device() callbacks")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240701101453.203985-1-clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
