Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When running Ubuntu 3.13.0-65-generic guest, QEMU sometimes crashes
during guest ACPI reset. It crashes on assert(s->rings_info_valid)
in pvscsi_process_io().
Analyzing the crash revealed that it happens when userspace issues
a sync during a reboot syscall.
Below are backtraces we gathered from the guests.
Guest backtrace when issuing PVSCSI_CMD_ADAPTER_RESET:
pci_device_shutdown
device_shutdown
init_pid_ns
init_pid_ns
kernel_power_off
SYSC_reboot
Guest backtrace when issuing PVSCSI_REG_OFFSET_KICK_RW_IO:
scsi_done
scsi_dispatch_cmd
blk_add_timer
scsi_request_fn
elv_rb_add
__blk_run_queue
queue_unplugged
blk_flush_plug_list
blk_finish_plug
ext4_writepages
set_next_entity
do_writepages
__filemap_fdatawrite_range
filemap_write_and_wait_range
ext4_sync_file
ext4_sync_file
do_fsync
sys_fsync
Since QEMU pvscsi should imitate VMware pvscsi device emulation,
we decided to imitate VMware's behavior in this case.
To check VMware behavior, we wrote a kernel module that issues
a reset to the pvscsi device and then issues a kick. We ran it on
VMware ESXi 6.5 and it seems that it simply ignores the kick.
Hence, we decided to ignore the kick as well.
Signed-off-by: Elazar Leibovich <elazar.leibovich@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200315132634.113632-1-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-8-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Depending on the length of sense data, vscsi_send_rsp() can
overrun the buffer size.
Do not copy more than SRP_MAX_IU_DATA_LEN bytes, and assert
that vscsi_send_iu() is always called with a size in range.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-7-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'union srp_iu' is meant as a pointer to any SRP Information
Unit type, it is not related to the size of a VIO DMA buffer.
Use a plain buffer for the VIO DMA read/write calls.
We can remove the reserved buffer from the 'union srp_iu'.
This issue was noticed when replacing the zero-length arrays
from hw/scsi/srp.h with flexible array member,
'clang -fsanitize=undefined' reported:
hw/scsi/spapr_vscsi.c:69:29: error: field 'iu' with variable sized type 'union viosrp_iu' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
union viosrp_iu iu;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-6-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce the req_iu() helper which returns a pointer to
the viosrp_iu union held in the vscsi_req structure.
This simplifies the next patch.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-5-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We already have a 'iu' pointer, use it
(this simplifies the next commit).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-4-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace sizeof() flexible arrays union srp_iu/viosrp_iu by the
SRP_MAX_IU_LEN definition, which is what this code actually meant
to use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-3-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This header use the srp_* structures declared in "hw/scsi/srp.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200305121253.19078-2-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to reduce the amount of requests issued by a guest on
1M reads/writes. This rises the performance up to 4% on that kind of
disk access pattern.
The maximum chunk size to be used for the guest disk accessing is
limited with seg_max parameter, which represents the max amount of
pices in the scatter-geather list in one guest disk request.
Since seg_max is virqueue_size dependent, increasing the virtqueue
size increases seg_max, which, in turn, increases the maximum size
of data to be read/write from a guest disk.
More details in the original problem statment:
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-id: 20200214074648.958-1-dplotnikov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 74d71ea16b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.
All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.
The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use virtio_delete_queue to make it more clear.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200117075547.60864-3-pannengyuan@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NMC93xx EEPROM is only used by few NIC cards and the
Am53C974 SCSI controller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191231183216.6781-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before the patch, seg_max parameter was immutable and hardcoded
to 126 (128 - 2) without respect to queue size. This has two negative effects:
1. when queue size is < 128, we have Virtio 1.1 specfication violation:
(2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size.
This violation affects the old Linux guests (ver < 4.14). These guests
crash on these queue_size setups.
2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>,
seg_max restrics guest's block request length which affects guests'
performance making them issues more block request than needed.
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
To mitigate this two effects, the patch adds the property adjusting seg_max
to queue size automaticaly. Since seg_max is a guest visible parameter,
the property is machine type managable and allows to choose between
old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors.
Not to change the behavior of the older VMs, prevent setting the default
seg_max_adjust value for older machine types.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE
protocol feature, then the device can be reset when requested.
If this feature is not supported, do not try a reset as this will send
a VHOST_USER_RESET_OWNER that the backend is not expecting,
potentially putting into an inoperable state.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtqueue notifications are not necessary during polling, so we disable
them. This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.
Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled. The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.
There is a measurable performance improvement of 5-10% with the null-co
block driver. Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's an old compatibility shim that just delegates to scsi-cd or scsi-hd.
Just like ide-drive, we don't need this.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relevant devices are:
* ide-hd (and ide-cd, ide-drive)
* scsi-hd (and scsi-cd, scsi-disk, scsi-block)
* virtio-blk-pci
We do not call del_boot_device_lchs() for ide-* since we don't need to -
IDE block devices do not support unplugging.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
We will need to add LCHS removal logic to scsi-hd's unrealize() in the
next commit.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
There is no DMA in Quadra 800, so the CPU reads/writes the data from the
PDMA register (offset 0x100, ESP_PDMA in hw/m68k/q800.c) and copies them
to/from the memory.
There is a nice assembly loop in the kernel to do that, see
linux/drivers/scsi/mac_esp.c:MAC_ESP_PDMA_LOOP().
The start of the transfer is triggered by the DREQ interrupt (see linux
mac_esp_send_pdma_cmd()), the CPU polls on the IRQ flag to start the
transfer after a SCSI command has been sent (in Quadra 800 it goes
through the VIA2, the via2-irq line and the vIFR register)
The Macintosh hardware includes hardware handshaking to prevent the CPU
from reading invalid data or writing data faster than the peripheral
device can accept it.
This is the "blind mode", and from the doc:
"Approximate maximum SCSI transfer rates within a blocks are 1.4 MB per
second for blind transfers in the Macintosh II"
Some references can be found in:
Apple Macintosh Family Hardware Reference, ISBN 0-201-19255-1
Guide to the Macintosh Family Hardware, ISBN-0-201-52405-8
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-4-laurent@vivier.eu>
This will be needed to implement pseudo-DMA
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-3-laurent@vivier.eu>
To prepare following patches move do_cmd and DMA special case
from handle_ti() to esp_do_dma().
This part of the code must be only executed with real DMA, not with
pseudo-DMA. And PDMA is detected in esp_do_dma(), so move this part
of the code in esp_do_dma(). We keep the code in handle_ti_cmd()
in the case no DMA is done.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-2-laurent@vivier.eu>
This patch implements basic support for the packed virtqueue. Compare
the split virtqueue which has three rings, packed virtqueue only have
one which is supposed to have better cache utilization and more
hardware friendly.
Please refer virtio specification for more information.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-8-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will help to account the operation in the following commit.
The difference is that we don't call scsi_disk_req_check_error() before
the 1st discard iteration anymore. That function also checks if
the request is cancelled, however it shouldn't get canceled until it
yields in blk_aio() functions anyway.
Same approach is already used for emulate_write_same.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190923121737.83281-7-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
it allows to report it in the error handler
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190923121737.83281-6-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
The qemu commit e6cc11d64f
has already resolved the issue for vhost scsi devices but
the fix was never applied to vhost-user scsi devices.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com
Message-Id: <1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When executing script in lsi_execute_script(), the LSI scsi adapter
emulator advances 's->dsp' index to read next opcode. This can lead
to an infinite loop if the next opcode is empty. Move the existing
loop exit after 10k iterations so that it covers no-op opcodes as
well.
Reported-by: Bugs SysSec <bugs-syssec@rub.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
scsi-disks decides whether it has a read-only device by looking at
whether the BlockBackend specified as drive=... is read-only. In the
case of an anonymous BlockBackend (with a node name specified in
drive=...), this is the read-only flag of the attached node. In the case
of an empty anonymous BlockBackend, it's always read-write because
nothing prevented it from being read-write.
This is a problem because scsi-cd would take write permissions on the
anonymous BlockBackend of an empty drive created without a drive=...
option. Using blockdev-insert-medium with a read-only node fails then
with the error message "Block node is read-only".
Fix scsi_realize() so that scsi-cd devices always take read-only
permissions on their BlockBackend instead.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1733920
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
commit a6f230c move blockbackend back to main AioContext on unplug. It set the AioContext of
SCSIDevice to the main AioContex, but s->ctx is still the iothread AioContex（if the scsi controller
is configure with iothread）. So if there are having in-flight requests during unplug, a failing assertion
happend. The bt is below:
(gdb) bt
#0 0x0000ffff86aacbd0 in raise () from /lib64/libc.so.6
#1 0x0000ffff86aadf7c in abort () from /lib64/libc.so.6
#2 0x0000ffff86aa6124 in __assert_fail_base () from /lib64/libc.so.6
#3 0x0000ffff86aa61a4 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000529118 in virtio_scsi_ctx_check (d=<optimized out>, s=<optimized out>, s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:246
#5 0x0000000000529ec4 in virtio_scsi_handle_cmd_req_prepare (s=0x2779ec00, req=0xffff740397d0) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:559
#6 0x000000000052a228 in virtio_scsi_handle_cmd_vq (s=0x2779ec00, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:603
#7 0x000000000052afa8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:59
#8 0x000000000054d94c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>) at /home/qemu-4.0.0/hw/virtio/virtio.c:2452
assert(blk_get_aio_context(d->conf.blk) == s->ctx) failed.
To avoid assertion failed, moving the "if" after qdev_simple_device_unplug_cb.
In addition, to avoid another qemu crash below, add aio_disable_external before
qdev_simple_device_unplug_cb, which disable the further processing of external clients
when doing qdev_simple_device_unplug_cb.
(gdb) bt
#0 scsi_req_unref (req=0xffff6802c6f0) at hw/scsi/scsi-bus.c:1283
#1 0x00000000005294a4 in virtio_scsi_handle_cmd_req_submit (req=<optimized out>,
s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:589
#2 0x000000000052a2a8 in virtio_scsi_handle_cmd_vq (s=s@entry=0x9c90e90,
vq=vq@entry=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:625
#3 0x000000000052afd8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>,
vq=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:60
#4 0x000000000054d97c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>)
at /home/qemu-4.0.0/hw/virtio/virtio.c:2447
#5 0x00000000009b204c in run_poll_handlers_once (ctx=ctx@entry=0x6efea40,
timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:521
#6 0x00000000009b2b64 in run_poll_handlers (ctx=ctx@entry=0x6efea40,
max_ns=max_ns@entry=4000, timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:559
#7 0x00000000009b2ca0 in try_poll_mode (ctx=ctx@entry=0x6efea40, timeout=0xffff7d7f7308,
timeout@entry=0xffff7d7f7348) at util/aio-posix.c:594
#8 0x00000000009b31b8 in aio_poll (ctx=0x6efea40, blocking=blocking@entry=true)
at util/aio-posix.c:636
#9 0x00000000006973cc in iothread_run (opaque=0x6ebd800) at iothread.c:75
#10 0x00000000009b592c in qemu_thread_start (args=0x6efef60) at util/qemu-thread-posix.c:502
#11 0x0000ffff8057f8bc in start_thread () from /lib64/libpthread.so.0
#12 0x0000ffff804e5f8c in thread_start () from /lib64/libc.so.6
(gdb) p bus
$1 = (SCSIBus *) 0x0
Signed-off-by: Zhengui li <lizhengui@huawei.com>
Message-Id: <1563696502-7972-1-git-send-email-lizhengui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1563829520-17525-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
