Commit Graph

150 Commits

Author SHA1 Message Date
Igor Mammedov
41041e5708 acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic
build_append_FOO() API.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
a86d86ac0a acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic
build_append_FOO() API.

PS:
Spec is Microsoft hosted, however 1.02 is no where to be found
(MS lists only the current revision) and the current revision is 1.07,
so bring comments in line with 1.07 as this is the only available spec.
There is no content change between originally implemented 1.02
(using QEMU code as reference) and 1.07. The only change is renaming
'Reserved2' field to 'Language', with the same 0 value.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
88b1045ead acpi: arm/virt: build_spcr: fix invalid cast
implicit cast to structure uint8_t member didn't raise error when
assigning value from incorrect enum, but when using build_append_gas()
(next patch) it will error out with (clang):
  implicit conversion from enumeration type 'AmlRegionSpace'
  to different enumeration type 'AmlAddressSpace'
fix cast error by using correct AML_AS_SYSTEM_MEMORY enum

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
271cbb2f2b acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API
Drop usage of packed structures and explicit endian conversions
when building IORT table use endian agnostic build_append_int_noprefix()
API to build it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210924122802.1455362-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
3548494e49 acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
fc02b86982 acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
37f33084ed acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table
Drop usage of packed structures and explicit endian conversions
when building MADT table for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-26-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
99a7545f92 acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-22-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
e5b6d55a6e acpi: use build_append_int_noprefix() API to compose SRAT table
Drop usage of packed structures and explicit endian conversions
when building SRAT tables for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
255bf20f2e acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build
table entries (which also removes some manual offset
calculations)

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Xingang Wang
42e0f050e3 hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3
When we build IORT table with SMMUv3 and bypass iommu feature enabled,
we can no longer setup one map from RC to SMMUv3 covering the whole RIDs.
We need to walk the PCI bus and check whether the root bus will bypass
iommu, setup RC -> SMMUv3 -> ITS map for RC which will not bypass iommu.

When a SMMUv3 node exist, we setup the idmap from SMMUv3 to ITS
covering the whole RIDs, and only modify the map from RC to SMMUv3.
We build RC -> SMMUv3 -> ITS map for root bus with bypass_iommu
disabled, and build idmap from RC to ITS directly for the rest of
the whole RID space.

For example we run qemu with command line:

qemu/build/aarch64-softmmu/qemu-system-aarch64 \
 -kernel arch/arm64/boot/Image \
 -enable-kvm \
 -cpu host \
 -m 8G \
 -smp 8,sockets=2,cores=4,threads=1 \
 -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3,default_bus_bypass_iommu=true \
 -drive file=./QEMU_EFI-pflash.raw,if=pflash,format=raw,unit=0,readonly=on \
 -device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \
 -device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x3.0x2,bypass_iommu=true \
 -device pcie-root-port,port=0x20,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \
 -device pcie-root-port,port=0x20,chassis=11,id=pci.11,bus=pci.10,addr=0x1 \
 -device pcie-root-port,port=0x20,chassis=21,id=pci.21,bus=pci.20,addr=0x1 \
 -device virtio-scsi-pci,id=scsi0,bus=pci.1,addr=0x1 \
 -device virtio-scsi-pci,id=scsi1,bus=pci.11,addr=0x1 \
 -device virtio-scsi-pci,id=scsi2,bus=pci.21,addr=0x1 \
 -initrd /mnt/davinci/wxg/kill-linux/rootfs/mfs.cpio.gz \
 -nographic \
 -append "rdinit=init console=ttyAMA0 earlycon=pl011,0x9000000 nokaslr" \

And we get guest configuration:

-+-[0000:20]---01.0-[21]--
 +-[0000:10]---01.0-[11]--
 \-[0000:00]-+-00.0  Device 1b36:0008
             +-01.0  Device 1af4:1000
             \-02.0-[01]--

With bypass_iommu enabled, the attached devices will bypass iommu.

/sys/class/iommu/smmu3.0x0000000009050000/
|-- device -> ../../../arm-smmu-v3.0.auto
|-- devices
|   `-- 0000:10:01.0 -> ../../../../../pci0000:10/0000:10:01.0

Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-7-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16 11:10:45 -04:00
Stefan Berger
f50be48a7b arm: Eliminate all TPM related code if CONFIG_TPM is not set
Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-3-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-06-15 10:54:55 -04:00
Zenghui Yu
0c38f60783 hw/arm/virt-acpi-build: Fix GSIV values of the {GERR, Sync} interrupts
The GSIV values in SMMUv3 IORT node are not correct as they don't match
the SMMUIrq enumeration, which describes the IRQ<->PIN mapping used by
our emulated vSMMU.

Fixes: a703b4f6c1 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210402084731.93-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12 11:06:24 +01:00
David Hildenbrand
6930ba0d44 acpi: Move maximum size logic into acpi_add_rom_blob()
We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
dependent on the table name, so we don't have to replicate for each and
every instance that creates such tables.

Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-4-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22 18:58:19 -04:00
David Hildenbrand
6c2b24d1d2 acpi: Set proper maximum size for "etc/table-loader" blob
The resizeable memory region / RAMBlock that is created for the cmd blob
has a maximum size of whole host pages (e.g., 4k), because RAMBlocks
work on full host pages. In addition, in i386 ACPI code:
  acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE);
makes sure to align to multiples of 4k, padding with 0.

For example, if our cmd_blob is created with a size of 2k, the maximum
size is 4k - we cannot grow beyond that. Growing might be required
due to guest action when rebuilding the tables, but also on incoming
migration.

This automatic generation of the maximum size used to be sufficient,
however, there are cases where we cross host pages now when growing at
runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when
trying to resize the resizeable memory region / RAMBlock:
  $ build/qemu-system-x86_64 --enable-kvm \
      -machine q35,nvdimm=on \
      -smp 1 \
      -cpu host \
      -m size=2G,slots=8,maxmem=4G \
      -object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \
      -device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \
      -nodefaults \
      -device vmgenid \
      -device intel-iommu

Results in:
  Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850:
  qemu-system-x86_64: Size too large: /rom@etc/table-loader:
    0x2000 > 0x1000: Invalid argument

In this configuration, we consume exactly 4k (32 entries, 128 bytes each)
when creating the VM. However, once the guest boots up and maps the MCFG,
we also create the MCFG table and end up consuming 2 additional entries
(pointer + checksum) -- which is where we try resizing the memory region
/ RAMBlock, however, the maximum size does not allow for it.

Currently, we get the following maximum sizes for our different
mutable tables based on behavior of resizeable RAMBlock:

  hw       table                max_size
  -------  ---------------------------------------------------------

  virt     "etc/acpi/tables"    ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
  virt     "etc/table-loader"   HOST_PAGE_ALIGN(initial_size)
  virt     "etc/acpi/rsdp"      HOST_PAGE_ALIGN(initial_size)

  i386     "etc/acpi/tables"    ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
  i386     "etc/table-loader"   HOST_PAGE_ALIGN(initial_size)
  i386     "etc/acpi/rsdp"      HOST_PAGE_ALIGN(initial_size)

  microvm  "etc/acpi/tables"    ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
  microvm  "etc/table-loader"   HOST_PAGE_ALIGN(initial_size)
  microvm  "etc/acpi/rsdp"      HOST_PAGE_ALIGN(initial_size)

Let's set the maximum table size for "etc/table-loader" to 64k, so we
can properly grow at runtime, which should be good enough for the future.

Migration is not concerned with the maximum size of a RAMBlock, only
with the used size - so existing setups are not affected. Of course, we
cannot migrate a VM that would have crash when started on older QEMU from
new QEMU to older QEMU without failing early on the destination when
synchronizing the RAM state:
    qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument
    qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram'
    qemu-system-x86_64: load of migration failed: Invalid argument

We'll refactor the code next, to make sure we get rid of this implicit
behavior for "etc/acpi/rsdp" as well and to make the code easier to
grasp.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-2-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22 18:58:19 -04:00
Marian Postevca
602b458201 acpi: Permit OEM ID and OEM table ID fields to be changed
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table name.

Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID
and OEM table ID for the strings "BOCHS" and "BXPC" and if they are
found, the game crashes(this may be an intentional detection
mechanism to prevent playing the game in a virtualized environment).

This patch allows you to override these default values.

The feature can be used in this manner:
qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN

The oem-id string can be up to 6 bytes in size, and the
oem-table-id string can be up to 8 bytes in size. If the string are
smaller than their respective sizes they will be padded with space.
If either of these parameters is not set, the current default values
will be used for the one missing.

Note that the the OEM Table ID field will not be extended with the
name of the table, but will use either the default name or the user
provided one.

This does not affect the -acpitable option (for user-defined ACPI
tables), which has precedence over -machine option.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-3-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-05 08:52:59 -05:00
Andrew Jones
9cd07db94b hw/arm/virt: Remove virt machine state 'smp_cpus'
virt machine's 'smp_cpus' and machine->smp.cpus must always have the
same value. And, anywhere we have virt machine state we have machine
state. So let's remove the redundancy. Also, to make it easier to see
that machine->smp is the true source for "smp_cpus" and "max_cpus",
avoid passing them in function parameters, preferring instead to get
them from the state.

No functional change intended.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20201215174815.51520-1-drjones@redhat.com
[PMM: minor formatting tweak to smp_cpus variable declaration]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08 15:13:38 +00:00
Yubo Miao
451b157041 acpi: Align the size to 128k
If table size is changed between virt_acpi_build and
virt_acpi_build_update, the table size would not be updated to
UEFI, therefore, just align the size to 128kb, which is enough
and same with x86. It would warn if 64k is not enough and the
align size should be updated.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-7-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Yubo Miao
6f9765fbad acpi/gpex: Build tables for pxb
The resources of pxbs are obtained by crs_build and the resources
used by pxbs would be moved from the resources defined for host-bridge.

The resources for pxb are composed of following two parts:
1. The bar space of the pci-bridge/pcie-root-port behined it
2. The config space of devices behind it.

Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-6-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Gerd Hoffmann
06d2dd4911 arm: use acpi_dsdt_add_gpex
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function.  No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann
7bf2567c12 acpi: move acpi_dsdt_add_power_button() to ged
Allow reuse for microvm.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-17 14:16:19 +02:00
Chen Qun
b3b0e81458 hw/arm/virt-acpi-build:Remove dead assignment in build_madt()
Clang static code analyzer show warning:
hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read
    madt = acpi_data_push(table_data, sizeof *madt);
    ^      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01 11:52:25 +02:00
Michael S. Tsirkin
9b897b399e arm/acpi: fix an out of spec _UID for PCI root
On ARM/virt machine type QEMU currently reports an incorrect _UID in
ACPI.

The particular node in question is the primary PciRoot (PCI0 in ACPI),
which gets assigned PCI0 in ACPI UID and 0 in the
DevicePath. This is due to the _UID assigned to it by build_dsdt in
hw/arm/virt-acpi-build.c Which does not correspond to the primary PCI
identifier given by pcibus_num in hw/pci/pci.c

In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with
the paragraph,

    Root PCI bridges will use the plug and play ID of PNP0A03, This will
    be stored in the ACPI Device Path _HID field, or in the Expanded
    ACPI Device Path _CID field to match the ACPI name space. The _UID
    in the ACPI Device Path structure must match the _UID in the ACPI
    name space.

(See especially the last sentence.)

A similar bug has been reported on i386, on that architecture it has
been reported to confuse at least macOS which uses ACPI UIDs to build
the DevicePath for NVRAM boot options, while OVMF firmware gets them via
an internal channel through QEMU.  When UEFI firmware and ACPI have
different values, this makes the underlying operating system unable to
report its boot option.

Cc: qemu-stable@nongnu.org
Reported-by: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-08-27 08:27:48 -04:00
Andrew Jones
2c1fb4d5c0 hw/arm/virt-acpi-build: Only expose flash on older machine types
The flash device is exclusively for the host-controlled firmware, so
we should not expose it to the OS. Exposing it risks the OS messing
with it, which could break firmware runtime services and surprise the
OS when all its changes disappear after reboot.

As firmware needs the device and uses DT, we leave the device exposed
there. It's up to firmware to remove the nodes from DT before sending
it on to the OS. However, there's no need to force firmware to remove
tables from ACPI (which it doesn't know how to do anyway), so we
simply don't add the tables in the first place. But, as we've been
adding the tables for quite some time and don't want to change the
default hardware exposed to versioned machines, then we only stop
exposing the flash device tables for 5.1 and later machine types.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200629140938.17566-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03 16:59:43 +01:00
Eric Auger
5ab540e9b7 arm/acpi: Add the TPM2.0 device under the DSDT
In case it is dynamically instantiated, add the TPM 2.0 device object
under the DSDT table in the ACPI namespace. Its HID is MSFT0101
while its current resource settings (CRS) property is initialized
with the guest physical address and MMIO size of the device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Message-Id: <20200622140620.17229-3-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-24 17:18:28 -04:00
Eric Auger
80bde69353 arm/acpi: TPM2 ACPI table support
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.

Signed-off-by: Eric Auger <eric.auger@redhat.com>

Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09 12:46:45 -04:00
Vishal Verma
c3b0cf6e7d hw/acpi/nvdimm: add a helper to augment SRAT generation
NVDIMMs can belong to their own proximity domains, as described by the
NFIT. In such cases, the SRAT needs to have Memory Affinity structures
in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node
data structures properly during NUMA initialization. See the following
for an example failure case.

https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/

Introduce a new helper, nvdimm_build_srat(), and call it for both the
i386 and arm versions of 'build_srat()' to augment the SRAT with
memory affinity information for NVDIMMs.

The relevant command line options to exercise this are below. Nodes 0-1
contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address
space.

    -object memory-backend-ram,id=mem0,size=2048M
    -numa node,nodeid=0,memdev=mem0,
    -numa cpu,node-id=0,socket-id=0
    -object memory-backend-ram,id=mem1,size=2048M
    -numa node,nodeid=1,memdev=mem1,
    -numa cpu,node-id=1,socket-id=1
    -numa node,nodeid=2,
    -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G
    -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2
    -numa node,nodeid=3,
    -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G
    -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3

Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09 11:17:59 -04:00
Dongjiu Geng
a08a64627b ACPI: Record the Generic Error Status Block address
Record the GHEB address via fw_cfg file, when recording
a error to CPER, it will use this address to find out
Generic Error Data Entries and write the error.

In order to avoid migration failure, make hardware
error table address to a part of GED device instead
of global variable, then this address will be migrated
to target QEMU.

Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14 15:03:09 +01:00
Dongjiu Geng
205cc75dee ACPI: Build Hardware Error Source Table
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
Now it only supports ARMv8 SEA, a type of Generic Hardware Error
Source version 2(GHESv2) error source. Afterwards, we can extend
the supported types if needed. For the CPER section, currently it
is memory section because kernel mainly wants userspace to handle
the memory errors.

This patch follows the spec ACPI 6.2 to build the Hardware Error
Source table. For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst

build_ghes_hw_error_notification() helper will help to add Hardware
Error Notification to ACPI tables without using packed C structures
and avoid endianness issues as API doesn't need explicit conversion.

Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14 15:03:09 +01:00
Dongjiu Geng
aa16508f1d ACPI: Build related register address fields via hardware error fw_cfg blob
This patch builds error_block_address and read_ack_register fields
in hardware errors table , the error_block_address points to Generic
Error Status Block(GESB) via bios_linker. The max size for one GESB
is 1kb, For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst

Now we only support one Error source, if necessary, we can extend to
support more.

Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14 15:03:09 +01:00
Kwangwoo Lee
b5a60bee74 hw/arm/virt: Add nvdimm hot-plug infrastructure
This adds support to init nvdimm acpi state and build nvdimm acpi tables.
Please note nvdimm_support is not yet enabled.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04 10:25:02 -04:00
Shameer Kolothum
bac78f9c69 acpi: Use macro for table-loader file name
Use macro for "etc/table-loader" and move it to the header
file similar to ACPI_BUILD_TABLE_FILE/ACPI_BUILD_RSDP_FILE etc.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200403101827.30664-2-shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-13 06:55:54 -04:00
Gerd Hoffmann
17e89077b7 acpi: add acpi=OnOffAuto machine property to x86 and arm virt
Remove the global acpi_enabled bool and replace it with an
acpi OnOffAuto machine property.

qemu throws an error now if you use -no-acpi while the machine
type you are using doesn't support acpi in the first place.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200320100136.11717-1-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-29 09:52:13 -04:00
Heyi Guo
b43bd40ba2 arm/acpi: simplify the description of PCI _CRS
The original code defines a named object for the resource template but
then returns the resource template object itself; the resulted output
is like below:

Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
{
    Name (RBUF, ResourceTemplate ()
    {
        WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
            0x0000,             // Granularity
            0x0000,             // Range Minimum
            0x00FF,             // Range Maximum
            0x0000,             // Translation Offset
            0x0100,             // Length
            ,, )
        ......
    })
    Return (ResourceTemplate ()
    {
        WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
            0x0000,             // Granularity
            0x0000,             // Range Minimum
            0x00FF,             // Range Maximum
            0x0000,             // Translation Offset
            0x0100,             // Length
            ,, )
        ......
    })
}

So the named object "RBUF" is actually useless. The more natural way
is to return RBUF instead, or simply drop RBUF definition.

Choose the latter one to simplify the code.

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-7-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:53 +00:00
Heyi Guo
f0ca15ad89 arm/acpi: fix duplicated _UID of PCI interrupt link devices
Using _UID of 0 for all PCI interrupt link devices absolutely violates
the spec. Simply increase one by one.

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-6-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:53 +00:00
Heyi Guo
c77b253159 arm/acpi: fix PCI _PRT definition
The address field in each _PRT mapping package should be constructed
with high word for device# and low word for function#, so it is wrong
to use bus_no as the high word. The existing code adds a bunch useless
entries with device #s above 31. Enumerate all possible slots
(i.e. PCI_SLOT_MAX) instead.

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-5-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:53 +00:00
Heyi Guo
93e4170001 arm/virt/acpi: remove _ADR from devices identified by _HID
According to ACPI spec, _ADR should be used for device on a bus that
has a standard enumeration algorithm, but not for device which is on
system bus and must be enumerated by OSPM. And it is not recommended
to contain both _HID and _ADR in a single device.

See ACPI 6.3, section 6.1, top of page 343:

A device object must contain either an _HID object or an _ADR object,
but should not contain both.

(https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf)

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-4-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:53 +00:00
Heyi Guo
cf48a9052e arm/virt/acpi: remove meaningless sub device "RP0" from PCI0
The sub device "RP0" under PCI0 in ACPI/DSDT does not contain any
method or property other than "_ADR", so it is safe to remove it.

Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13 14:14:53 +00:00
Heyi Guo
e04c13cdcf hw/arm/acpi: enable SHPC native hot plug
After the introduction of generic PCIe root port and PCIe-PCI bridge,
we will also have SHPC controller on ARM, so just enable SHPC native
hot plug.

Also update tests/data/acpi/virt/DSDT* to pass "make check".

Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:35 +00:00
Heyi Guo
f363581397 hw/arm/acpi: simplify AML bit and/or statement
The last argument of AML bit and/or statement is the target variable,
so we don't need to use a NULL target and then an additional store
operation; using just aml_and() or aml_or() statement is enough.

Also update tests/data/acpi/virt/DSDT* to pass "make check".

Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:35 +00:00
Shameer Kolothum
1962f31b86 hw/arm: Use GED for system_powerdown event
For machines 4.2 or higher with ACPI boot use GED for system_powerdown
event instead of GPIO. Guest boot with DT still uses GPIO.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05 17:12:09 -04:00
Shameer Kolothum
442da7dc77 hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
Generate Memory Affinity Structures for PC-DIMM ranges.

Also, Linux and Windows need ACPI SRAT table to make memory hotplug
work properly, however currently QEMU doesn't create SRAT table if
numa options aren't present on CLI. Hence add support(>=4.2) to
create numa node automatically (auto_enable_numa_with_memhp) when
QEMU is started with memory hotplug enabled but without '-numa'
options on CLI.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-7-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05 17:12:08 -04:00
Shameer Kolothum
cff51ac978 hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
This initializes the GED device with base memory and irq, configures
ged memory hotplug event and builds the corresponding aml code. With
this, both hot and cold plug of device memory is enabled now for Guest
with ACPI boot. Memory cold plug support with Guest DT boot is not yet
supported.

As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h
to avoid "make check" failure.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-10-05 17:12:08 -04:00
Tao Xu
7e721e7b10 numa: move numa global variable numa_info into MachineState
Move existing numa global numa_info (renamed as "nodes") into NumaState.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Tao Xu
118154b767 numa: move numa global variable have_numa_distance into MachineState
Move existing numa global have_numa_distance into NumaState.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Tao Xu
aa57020774 numa: move numa global variable nb_numa_nodes into MachineState
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Markus Armbruster
2e5b09fd0e hw/core: Move cpu.c, cpu.h from qom/ to hw/core/
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
2019-08-21 13:24:01 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00