The upper_mem field of the Multiboot information struct doesn't really
contain the RAM size - 1 MB like we used to calculate it, but only the
memory from 1 MB up to the first (upper) memory hole.
In order to correctly retrieve this information, the multiboot ROM now
looks at the mmap it creates anyway and tries to find the size of
contiguous usable memory from 1 MB.
Drop the multiboot.c definition of lower_mem and upper_mem because both
are queried at runtime now.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-3-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure we use the correct TARGET/PRI macros in the debug statements.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use it for all targets, but be careful not to pass invalid CPUState.
cpu_single_env can be NULL, e.g. on Xen.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Peter Crosthwaite (3) and others
# Via Peter Maydell
* pmaydell/arm-devs.for-upstream:
nand: Don't inherit from Sysbus
block/nand: Convert Sysbus::init to Device::realize
block/nand: QOM casting sweep
i.MX31: Fix PRCS bit test
arm/boot: Free dtb blob memory after use
i.MX: Rework functions/types name and use new style initialization
i.MX: Implement a more complete version of the GPT timer.
ARM: Allow dumping of device tree
Message-id: 1372184516-32397-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Cornelia Huck (2) and Christian Borntraeger (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up guest and host notifies.
virtio-ccw: Wire up ioeventfd.
s390/virtio-ccw: Fix virtio reset
Message-id: 1372177538-9812-1-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The prescribed transition from Sysbus::init function to a
Device::realize.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cppcheck detected a condition which was always false.
According to the MCIMX31 Reference Manual, the PRCS bits have to be 01
to select the Frequency Pre-Multiplier (FPM). PRCS uses bits 1 and 2,
so we have to test for 2.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id: 1370810662-32320-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371209256-11408-1-git-send-email-peter.maydell@linaro.org
* use dynamic cast whenever possible
* Change function names to some more meaningful prefix
* Change type names to a more meaningful one
* use new style device initialization
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1369898943-1993-3-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By calling qemu_devtree_dumpdtb near the end of load_dtb.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On virtio reset we must reset the indicator to avoid stale interrupts,
e.g. after a reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit 9f24a8030a.
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
# By Kevin Wolf (22) and Fam Zheng (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
vmdk: refuse to open higher version than supported
block: Always enable discard on the protocol level
qcow2: Batch discards
qcow2: Options to enable discard for freed clusters
qcow2: Add refcount update reason to all callers
Revert "block: Disable driver-specific options for 1.5"
ide: Clean up ide_exec_cmd()
ide: Convert SMART commands to ide_cmd_table handler
ide: Convert CF-ATA commands to ide_cmd_table handler
ide: Convert ATAPI commands to ide_cmd_table handler
ide: Convert SEEK to ide_cmd_table handler
ide: Convert FLUSH CACHE to ide_cmd_table handler
ide: Convert SET FEATURES to ide_cmd_table handler
ide: Convert CHECK POWER MDOE to ide_cmd_table handler
ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
ide: Convert DMA read/write commands to ide_cmd_table handler
ide: Convert PIO read/write commands to ide_cmd_table handler
ide: Convert read/write multiple commands to ide_cmd_table handler
ide: Convert verify commands to ide_cmd_table handler
ide: Convert cmd_nop commands to ide_cmd_table handler
...
Message-id: 1372065035-19601-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
configure: Add signed*signed check to [u]int128_t test
Makefile: pass include directives to dtc via CPPFLAGS, not CFLAGS
qapi: lack of two commas in dict
sd: pass bool parameter for sd_init
qemu-char: use bool in qemu_chr_open_socket and simplify code a bit
vnc: use booleans for vnc_connect, vnc_listen_read and vnc_display_add_client
block/nand: Formatting sweep
qxl: Fix QXLRam initialisation.
acl: acl_add can't insert before last list element, fix
configure: Fix "ERROR: ERROR: " for missing/incompatible DTC
audio: Replace static functions in header file by macros, remove GCC_ATTR
libcacard: Fix cppcheck warning and remove unneeded code
savevm: Fix potential memory leak
kvm: Fix potential resource leak (missing fclose)
qemu-img: Add missing GCC_FMT_ATTR
qemu-options: trivial fix for -mon args help
vl: reformat SDL ifdeffery a bit
Message-id: 1371893076-9643-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All commands are now converted to ide_cmd_table handlers, so it can be
unconditional now and the old switch block can go.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cmd_nop handles all commands that don't really do anything in our
implementation except setting status register flags.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As a preparation for moving all IDE commands into their own function
like in the ATAPI code, introduce a 'handler' callback to ide_cmd_table.
Commands using this new infrastructure get some things handled
automatically:
* The BSY flag is set before calling the handler (in order to avoid bugs
like the one fixed in f68ec837) and reset on completion.
* The (obsolete) DSC flag in the status register is set on completion if
the command is flagged with SET_DSC in the command table
* An IRQ is triggered on completion.
* The error register and the ERR flag in the status register are cleared
before calling the handler and on completion it is asserted that
either none or both of them are set.
No commands are converted at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 7b074a22da changed the serial
number of hid devices. Add compat properties to keep the old serial
number for qemu 0.12 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value. Applies to emulated devices only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next libusb release will deprecate libusb_get_port_path, and since
we compile with -Werror, this breaks the build.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add Faraday FUSBH200 support, which is slightly different from EHCI spec.
(Or maybe simply a bad/wrong implementation...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
