The return value of v9fs_mark_fids_unreclaim() is then propagated to
pdu_complete(). It should be a negative errno, not -1.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Legacy PCI device assignment has been removed from Linux in 4.12,
and had been deprecated 2 years ago there. We can remove it from
QEMU as well.
The ROM loading code was shared with Xen PCI passthrough, so move
it to hw/xen.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'dev' variable can be NULL when the guest OS calls identify on an IDE
unit that does not have a drive attached to it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171020091403.1479-1-berrange@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The allwinner code is only needed for the allwinner board (for which
we also have a separate CONFIG_ALLWINNER_A10 config switch), so it
does not make sense that we compile this for all the other boards
that need AHCI, too. Let's move it to a separate file that is only
compiled when CONFIG_ALLWINNER_A10 is set.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508784509-29377-1-git-send-email-thuth@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is surprisingly useful when trying to debug DMA issues.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This hack originated from before the memory region API was introduced, and
increased the size of the ledma DMA device to capture incorrect accesses
beyond the end of the ledma device. A full analysis can be found on Artyom's
blog at http://tyom.blogspot.co.uk/2010/10/bug-in-all-solaris-versions-after-57.html.
With the memory API we can now simply alias the incorrect access onto its
intended destination allowing us to remove the hack.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a new SPARC32_DMA container object (including an appropriate container
memory region) and add instances of the SPARC32_ESPDMA_DEVICE and
SPARC32_LEDMA_DEVICE as child objects. The benefit is that most of the gpio
wiring complexity between esp/espdma and lance/ledma is now hidden within the
SPARC32_DMA realize function.
Since the sun4m IOMMU is already QOMified we can find a reference to
it using object_resolve_path_type() allowing us to completely remove all external
references to the iommu pointer.
Finally we rework sun4m's sparc32_dma_init() to invoke the new SPARC32_DMA object
and wire up the remaining board memory regions/IRQs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This makes it possible to reference the lance device from the ledma device as
required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This enables them to be used outside of lance.c. We also update the comment to
refer to the SPARC32 lance device rather than the AMD PCNet-II device (of which
lance is a register-compatible subset).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This makes it possible to reference the esp device from the espdma device as
required, and by wiring up the device ourselves in sun4m.c we can drop use
of the esp_init() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This enables them to be used outside of esp.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This enables us to remove the last remaining (opaque) qdev property. Whilst we
are here, also update iommu_init() to use TYPE_SUN4M_IOMMU instead of a
hardcoded string.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation to allow the type to be used elsewhere.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
By using the sysbus interface it is possible to wire up the esp/le devices
to the sun4m DMA controller directly during sun4m_hw_init() instead of
passing qemu_irqs into the sparc32_dma_init() function.
This is an intermediate step to allow further reorganisation as more logic
is moved into the relevant SPARC32 DMA devices; there will be a final
refactoring of sparc32_dma_init() once this work is complete.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Due to slight differences in behaviour accessing the registers for the
esp and le devices, create two separate SPARC32_DMA_DEVICE types and
update the sun4m machine to use.
Note that by using different device types we already know the size of
the register block and the value of is_ledma at init time, allowing us to
drop the SPARC32_DMA_DEVICE realize function and the is_ledma device
property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Also update the function names to match as appropriate. While we're
here rename the type from sparc32_dma to sparc32-dma in order to
match the current QOM convention.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We exposed gpex_set_irq_num() for machines to set the INTx to
GSI routing. However if the machine forgets to call that
function we currently do not check the association was properly
done. Let's initialize gsi values to -1 and if this value is
found in gpex_route_intx_pin_to_irq, set the routing mode as
disabled.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1508776211-22175-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implemented system reset by creating SYSRESETREQ gpio
out from nvic.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Message-id: 1509253165-7434-1-git-send-email-sundeep.lkml@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixed incorrect frame size mask, validated maximum frame
size in spi_write and removed dead code.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1508898544-10307-1-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Specify the number of CPUs that can run on ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- missing \r in the BIOS console output
- CPU type name is now "s390x-cpu"
- fixup for the host-model on z14 and older machine versions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ir9v
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20171030' into staging
s390x: fixups for 2.11
- missing \r in the BIOS console output
- CPU type name is now "s390x-cpu"
- fixup for the host-model on z14 and older machine versions
# gpg: Signature made Mon 30 Oct 2017 08:34:15 GMT
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20171030:
s390-*.img: update s390 bios with latest fixes
s390-ccw: print carriage return with new lines
s390x/kvm: use cpu model for gscb on compat machines
target/s390x: change CPU type name to "s390x-cpu"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting a guest with
<os>
<type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
</os>
<cpu mode='host-model'/>
on an IBM z14 results in
"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"
This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected. As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless. So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Xen vIOMMU device model will be in Xen hypervisor. Skip vIOMMU
check for Xen here when vcpu number is more than 255.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Message-Id: <1502842933-8323-1-git-send-email-tianyu.lan@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
object_initialize() is intended for inplace initialization of
objects, but here it's first allocated with g_new0() and then
initialized with object_initialize(). QEMU already has API
to do this (object_new), so do object creation with suitable
for usecase API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-36-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
default cpu model 'any' resolves to type TYPE_SH7750R_CPU
in superh_cpu_class_by_name(), so use it directly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-21-git-send-email-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It 'works' with default CPU only because of bug in
moxie_cpu_class_by_name() where it treats cpu_model
as type name and default cpu_model also happens to be
type name. But specifying explicitly cpu on CLI,
ex: '-cpu MoxieLite', makes QEMU fail since
moxie_cpu_class_by_name() doesn't traslate cpu_model
to cpu type and fails to find corresponding object class.
Fix moxie_cpu_class_by_name() to do proper
cpu_model -> cpu type
translation and fix default cpu_model to be cpu_model
instead of being typename.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-15-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
