For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU execution should be suspended when new BH is scheduled.
This is needed to avoid guest timeouts caused by the long cycles
of the execution. In replay mode execution may hang when
vCPU sleeps and block event comes to the queue.
This patch adds notification which wakes up vCPU or interrupts
execution of guest code.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
--
v2: changed first_cpu to current_cpu (suggested by Richard Henderson)
v4: moved vCPU notification to aio_bh_enqueue (suggested by Paolo Bonzini)
Message-Id: <165364837317.688121.17680519919871405281.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
=t5eR
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-scsi: move request-related items from .h to .c
virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio-scsi: don't waste CPU polling the event virtqueue
virtio-scsi: fix ctrl and event handler functions in dataplane mode
util/event-loop-base: Introduce options to set the thread pool size
util/main-loop: Introduce the main loop into QOM
Introduce event-loop-base abstract class
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'event-loop-base' provides basic property handling for all 'AioContext'
based event loops. So let's define a new 'MainLoopClass' that inherits
from it. This will permit tweaking the main loop's properties through
qapi as well as through the command line using the '-object' keyword[1].
Only one instance of 'MainLoopClass' might be created at any time.
'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to
mark 'MainLoop' as non-deletable.
[1] For example:
-object main-loop,id=main-loop,aio-max-batch=<value>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-3-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the 'event-loop-base' abstract class, it'll hold the
properties common to all event loops and provide the necessary hooks for
their creation and maintenance. Then have iothread inherit from it.
EventLoopBaseClass is defined as user creatable and provides a hook for
its children to attach themselves to the user creatable class 'complete'
function. It also provides an update_params() callback to propagate
property changes onto its children.
The new 'event-loop-base' class will live in the root directory. It is
built on its own using the 'link_whole' option (there are no direct
function dependencies between the class and its children, it all happens
trough 'constructor' magic). And also imposes new compilation
dependencies:
qom <- event-loop-base <- blockdev (iothread.c)
And in subsequent patches:
qom <- event-loop-base <- qemuutil (util/main-loop.c)
All this forced some amount of reordering in meson.build:
- Moved qom build definition before qemuutil. Doing it the other way
around (i.e. moving qemuutil after qom) isn't possible as a lot of
core libraries that live in between the two depend on it.
- Process the 'hw' subdir earlier, as it introduces files into the
'qom' source set.
No functional changes intended.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-2-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.
The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.
This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.
Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Offset calculations are easy enough to get wrong. Let's add a few
variables to make moving around elf headers and data sections easier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330123603.107120-6-frankja@linux.ibm.com>
Let's move from a boolean to a int variable which will later enable us
to store the number of sections that are in the dump file.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220330123603.107120-4-frankja@linux.ibm.com>
There's no need to have phdr_num and sh_info at the same time. We can
make phdr_num 32 bit and set PN_XNUM when we write the header if
phdr_num >= PN_XNUM.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407094824.5074-1-frankja@linux.ibm.com>
The bug referenced in os-win32.h was fixed in mingw-w64 v6.
According to repology, version 5 used by ubuntu 18, which is
not yet out of support, so provide a meson link test for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>
Below is the updated version of the patch adding debugging support to WHPX.
It incorporates feedback from Alex Bennée and Peter Maydell regarding not
changing the emulation logic depending on the gdb connection status.
Instead of checking for an active gdb connection to determine whether QEMU
should intercept the INT1 exceptions, it now checks whether any breakpoints
have been set, or whether gdb has explicitly requested one or more CPUs to
do single-stepping. Having none of these condition present now has the same
effect as not using gdb at all.
Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only implemented for POSIX anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-30-marcandre.lureau@redhat.com>
[Add braces around if statements. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with other os_ functions that do not have POSIX
implementation, declare an inline function for the stub in os-win32.h.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-27-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Along with other state tracking functions. Rename it for consistency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-21-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer used after the previous patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220307070401.171986-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e0220bb5b2 made cpus.c target-agnostic but didn't notice
the cpu_list() function is only defined in target-specific code
in "cpu.h". Move list_cpus() declaration to "exec/cpu-common.h"
because this function is not softmmu-specific and can also be
used by user-mode, along with moving its implementation to cpu.c,
which is compiled per target.
Fixes: e0220bb5b2 ("softmmu: Build target-agnostic objects once")
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220314140108.26222-1-philippe.mathieu.daude@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route
table, which is not efficient if we are adding lots of routes in some cases.
This patch lets callers invoke the kvm_irqchip_commit_routes(), so the
callers can decide how to optimize.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo suggested adding the new API to support route changes [1]. We should invoke
kvm_irqchip_begin_route_changes() before changing the routes, increasing the
KVMRouteChange.changes if the routes are changed, and commit the changes at last.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg02898.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-2-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
module_allow_arch() is the single target-specific call in the
whole vl.c file. Move the module initialization out to arch_init.c,
that way we'll be able to build vl.o once for all targets (the
next commit).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-21-f4bug@amsat.org>
Add cpus_are_resettable() to AccelOps, and implement it for the
KVM accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-12-f4bug@amsat.org>
Add cpu_thread_is_idle() to AccelOps, and implement it for the
KVM / WHPX accelerators.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE,
expose hax_allowed to hax_enabled() macro.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
kvm_on_sigbus() and kvm_on_sigbus_vcpu() prototypes don't have
to be target specific. Remove this limitation to be able to build
softmmu/cpus.c once for all targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-7-f4bug@amsat.org>
target_ulong is target-specific, while vaddr isn't.
Remove the unnecessary "exec/cpu-defs.h" target-speficic header
from "memory_mapping.h" and use the target-agnostic "hw/core/cpu.h"
locally in memory_mapping.c.
Remove "exec/memory.h" since MemoryRegion is forward-declared in
"qemu/typedefs.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-6-f4bug@amsat.org>
Assertions in the callers of the function pointrs are already
added by previous patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220303151616.325444-30-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev functions run always under the BQL lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patches, split block-backend.h
in block-backend-io.h and block-backend-global-state.h
In addition, remove "block/block.h" include as it seems
it is not necessary anymore, together with "qemu/iov.h"
block-backend-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The daemonizing functions in os-posix (os_daemonize() and
os_setup_post()) only daemonize the process if the static `daemonize`
variable is set. Right now, it can only be set by os_parse_cmd_args().
In order to use os_daemonize() and os_setup_post() from the storage
daemon to have it be daemonized, we need some other way to set this
`daemonize` variable, because I would rather not tap into the system
emulator's arg-parsing code. Therefore, this patch adds an
os_set_daemonize() function, which will return an error on os-win32
(because daemonizing is not supported there).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-2-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
In the next commit we will use the dma_addr_t type in the QEMUSGList
structure. Since currently dma_addr_t is defined after QEMUSGList,
move the declarations to have dma_addr_t defined first. This is a
pure code-movement patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-10-f4bug@amsat.org>
DMA API should not be included in user-mode emulation.
If so, build should fail. Remove the CONFIG_USER_ONLY check.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove drive_get_max_devs, as it is not used by anyone.
Last use was removed in commit 8f2d75e81d
("hw: Drop superfluous special checks for orphaned -drive").
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211215121140.456939-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_def is only a particular use case of
qemu_opts_parse_noisily, so it can be inlined.
Also remove drive_mark_claimed_by_board, as it is only defined
but not implemented (nor used) anywhere.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211215121140.456939-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove qemu_run_machine_init_done_notifiers() since no implementation
and user.
Fixes: f66dc8737c ("vl: move all generic initialization out of vl.c")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220104024136.1433545-1-xiaoyao.li@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dma_memory_read() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
dma_memory_write() returns a MemTxResult type. Do not discard
it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-18-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-17-philmd@redhat.com>
Let devices specify transaction attributes when calling st*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-16-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
DMA operations are run on any kind of buffer, not arrays of
uint8_t. Convert dma_buf_read/dma_buf_write functions to take
a void pointer argument and save us pointless casts to uint8_t *.
Remove this pointless casts in the megasas device model.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-9-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_rw().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-5-philmd@redhat.com>
We will add the MemTxAttrs argument to dma_memory_rw() in
the next commit. Since dma_memory_rw_relaxed() is only used
by dma_memory_rw(), modify it first in a separate commit to
keep the next commit easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-4-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_set().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-3-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_valid().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-2-philmd@redhat.com>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The previous commits eliminated all uses. Drop the function.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-14-armbru@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[Extracted from Maxim's patch into a separate commit. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211111110604.207376-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of invoking select_watchdog_action from both HMP and command line,
go directly from HMP to QMP and use QemuOpts as the intermediary for the
command line.
This makes -watchdog-action explicitly a shortcut for "-action watchdog",
so that "-watchdog-action" and "-action watchdog" override each other
based on the position on the command line; previously, "-action watchdog"
always won.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dirty_pages is used to calculate dirtyrate via dirty ring, when
enabled, kvm-reaper will increase the dirty pages after gfns
being dirtied.
kvm_dirty_ring_enabled shows if kvm-reaper is working. dirtyrate
thread could use it to check if measurement can base on dirty
ring feature.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <fee5fb2ab17ec2159405fc54a3cff8e02322f816.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_fdt_add_path() works like qemu_fdt_add_subnode(), except it
also adds all missing subnodes from the given path. We'll use it
in a coming patch where we will add cpu-map to the device tree.
And we also tweak an error message of qemu_fdt_add_subnode().
Co-developed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211020142125.7516-3-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bytes argument int64_t to be consistent with modern block-layer.
Callers should be OK with it as type becomes wider.
What is inside functions?
- Conversion from int64_t to size_t. Still, we
can't have a buffer larger than SIZE_MAX, therefore bytes should not be
larger than SIZE_MAX as well. Add an assertion.
- Passing to blk_co_pwritev() / blk_co_preadv() which already has
int64_t bytes argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
We already have this marker for the blk_co_flush function declaration in
block/block-backend.c. Add it in the header too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wording tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
1. Convert bytes in BlkAioEmAIOCB:
aio->bytes is only passed to already int64_t interfaces, and set in
blk_aio_prwv, which is updated here.
2. For all updated functions the parameter type becomes wider so callers
are safe.
3. In blk_aio_prwv we only store bytes to BlkAioEmAIOCB, which is
updated here.
4. Other updated functions are wrappers on blk_aio_prwv.
Note that blk_aio_preadv and blk_aio_pwritev become safer: before this
commit, it's theoretically possible to pass qiov with size exceeding
INT_MAX, which than converted to int argument of blk_aio_prwv. Now it's
converted to int64_t which is a lot better. Still add assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion and grammar]
Signed-off-by: Eric Blake <eblake@redhat.com>
Function is updated so that parameter type becomes wider, so all
callers should be OK with it.
Look at blk_co_copy_range() itself: bytes is passed only to
blk_check_byte_request() and bdrv_co_copy_range(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert blk_pdiscard, blk_pwrite_compressed, blk_pwrite_zeroes.
These are just wrappers for functions with int64_t argument, so allow
passing int64_t as well. Parameter type becomes wider so all callers
should be OK with it.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Note also that we don't (and are not going to) convert blk_pwrite and
blk_pread: these functions return number of bytes on success, so to
update them, we should change return type to int64_t as well, which
will lead to investigating and updating all callers which is too much.
So, blk_pread and blk_pwrite remain unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We updated blk_do_pdiscard() and its wrapper blk_co_pdiscard(). Both
functions are updated so that the parameter type becomes wider, so all
callers should be OK with it.
Look at blk_do_pdiscard(): bytes is passed only to
blk_check_byte_request() and bdrv_co_pdiscard(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().
All functions are converted so that the parameter type becomes wider, so
all callers should be OK with it.
Look at blk_do_pwritev_part() body:
bytes is passed to:
- trace_blk_co_pwritev (we update it here)
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_pwritev_part - all already have int64_t argument.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.
blk_co_preadv() only passes its arguments to blk_do_preadv().
blk_do_preadv() passes bytes to:
- trace_blk_co_preadv, which is updated too
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_preadv, which are already int64_t.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
"sysemu/sev.h" is only used from x86-specific files. Let's move it
to include/hw/i386, and merge it with target/i386/sev.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007161716.453984-16-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken
up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect() is used to atomically unblock the signal and begin sleeping.
The signal is sent unconditionally so there's no need to worry about
races between actually sleeping and the "we think we're sleeping"
state. It may lead to an extra wakeup but that's better than missing
it entirely.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210916155404.86958-6-agraf@csgraf.de
[agraf: Remove unused 'set' variable, always advance PC on WFX trap,
support vm stop / continue operations and cntv offsets]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Apple Silicon available to the masses, it's a good time to add support
for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs
working, including save/restore.
Known limitations:
- WFI handling is missing (follows in later patch)
- No watchpoint/breakpoint support
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-5-agraf@csgraf.de
[PMM: added missing #include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to install a migration helper for the ARM hvf backend.
Let's introduce an arch callback for the overall hvf init chain to
do so.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-4-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Userland targers will otherwise use a poisoned CONFIG_NVMM
Signed-off-by: Reinoud Zandijk <Reinoud@NetBSD.org>
Message-Id: <20210718134650.1191-2-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add function to change bs inside blk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We added a stub for the arch_type global in commit 5964ed56d9 so
that we could compile blockdev.c into the tools. However, in commit
9db1d3a2be we removed the only use of arch_type from blockdev.c.
The stub is therefore no longer needed, and we can delete it again,
together with the QEMU_ARCH_NONE value that only the stub was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-9-peter.maydell@linaro.org
The QEMU_ARCH_VIRTIO_* defines are used only in one file,
qdev-monitor.c. Move them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210730105947.28215-7-peter.maydell@linaro.org
When Hexagon was added we forgot to add it to the QEMU_ARCH_*
enumeration. This doesn't cause a visible effect because at the
moment Hexagon is linux-user only and the QEMU_ARCH_* constants are
only used in softmmu, but we might as well add it in, since it's the
only architecture currently missing from the list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20210730105947.28215-6-peter.maydell@linaro.org
The kvm_available() function reports whether KVM support was
compiled into the QEMU binary; it returns the value of the
CONFIG_KVM define.
The only place in the codebase where we use this function is
in qmp_query_kvm(). Now that accelerators are based on QOM
classes we can instead use accel_find("kvm") and remove the
kvm_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-3-peter.maydell@linaro.org
The xen_available() function is used only to produce an error
for some Xen-specific command line options in QEMU binaries where
Xen support was not compiled in: it just returns the value of
the CONFIG_XEN define.
Now that accelerators are QOM classes, we can check for
"does this binary have Xen compiled in" with accel_find("xen"),
and drop the xen_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-2-peter.maydell@linaro.org
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's provide a way to control the use of RAM_NORESERVE via memory
backends using the "reserve" property which defaults to true (old
behavior).
Only Linux currently supports clearing the flag (and support is checked at
runtime, depending on the setting of "/proc/sys/vm/overcommit_memory").
Windows and other POSIX systems will bail out with "reserve=false".
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM. This essentially allows
avoiding to set "/proc/sys/vm/overcommit_memory == 0") when using
virtio-mem and also supporting hugetlbfs in the future.
As really only Linux implements RAM_NORESERVE right now, let's expose
the property only with CONFIG_LINUX. Setting the property to "false"
will then only fail in corner cases -- for example on very old kernels
or when memory overcommit was completely disabled by the admin.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-11-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is only one caller, and shortly we will need access
to the MachineState, which tcg_init_machine already has.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can move the definition of hvf_vcpu_exec() into our internal
hvf header, obsoleting the need for hvf-accel-ops.h.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-11-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hvf_set_phys_mem() function is only called within the same file.
Make it static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-6-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
