Libaio defines IO_CMD_FDSYNC command to sync all outstanding
asynchronous I/O operations, by flushing out file data to the
disk storage. Enable linux-aio to submit such aio request.
When using aio=native without fdsync() support, QEMU creates
pthreads, and destroying these pthreads results in TLB flushes.
In a real-time guest environment, TLB flushes cause a latency
spike. This patch helps to avoid such spikes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240425070412.37248-1-ppandit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main loop has two AioContexts: qemu_aio_context and iohandler_ctx.
The main loop runs them both, but nested aio_poll() calls on
qemu_aio_context exclude iohandler_ctx.
Which one should qemu_get_current_aio_context() return when called from
the main loop? Document that it's always qemu_aio_context.
This has subtle effects on functions that use
qemu_get_current_aio_context(). For example, aio_co_reschedule_self()
does not work when moving from iohandler_ctx to qemu_aio_context because
qemu_get_current_aio_context() does not differentiate these two
AioContexts.
Document this in order to reduce the chance of future bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240506190622.56095-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
This patch is a prep patch for the following MCQ support patch for
hw/ufs. This patch updated minimal mandatory fields to support MCQ
based on UFSHCI 4.0.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-2-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Add a parameter that enables discard-after-copy. That is mostly useful
in "push backup with fleecing" scheme, when source is snapshot-access
format driver node, based on copy-before-write filter snapshot-access
API:
[guest] [snapshot-access] ~~ blockdev-backup ~~> [backup target]
| |
| root | file
v v
[copy-before-write]
| |
| file | target
v v
[active disk] [temp.img]
In this case discard-after-copy does two things:
- discard data in temp.img to save disk space
- avoid further copy-before-write operation in discarded area
Note that we have to declare WRITE permission on source in
copy-before-write filter, for discard to work. Still we can't take it
unconditionally, as it will break normal backup from RO source. So, we
have to add a parameter and pass it thorough bdrv_open flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240313152822.626493-5-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.
That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.
The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The LuringState typedef is defined twice, in include/block/raw-aio.h and
block/io_uring.c. Move it in include/block/aio.h, which is included
everywhere the typedef is needed, since include/block/aio.h already has
to define the forward reference to the struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The term "QEMU global mutex" is identical to the more widely used Big
QEMU Lock ("BQL"). Update the code comments and documentation to use
"BQL" instead of "QEMU global mutex".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_context_set_aio_params() doesn't use its undocumented
Error** argument. Remove it to simplify.
Note this removes a use of "unchecked Error**" in
iothread_set_aio_context_params().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231120171806.19361-1-philmd@linaro.org>
The AioContext lock no longer exists.
There is one noteworthy change:
- * More specifically, these functions use BDRV_POLL_WHILE(bs), which
- * requires the caller to be either in the main thread and hold
- * the BlockdriverState (bs) AioContext lock, or directly in the
- * home thread that runs the bs AioContext. Calling them from
- * another thread in another AioContext would cause deadlocks.
+ * More specifically, these functions use BDRV_POLL_WHILE(bs), which requires
+ * the caller to be either in the main thread or directly in the home thread
+ * that runs the bs AioContext. Calling them from another thread in another
+ * AioContext would cause deadlocks.
I am not sure whether deadlocks are still possible. Maybe they have just
moved to the fine-grained locks that have replaced the AioContext. Since
I am not sure if the deadlocks are gone, I have kept the substance
unchanged and just removed mention of the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Delete these functions because nothing calls these functions anymore.
I introduced these APIs in commit 98563fc3ec ("aio: add
aio_context_acquire() and aio_context_release()") in 2014. It's with a
sigh of relief that I delete these APIs almost 10 years later.
Thanks to Paolo Bonzini's vision for multi-queue QEMU, we got an
understanding of where the code needed to go in order to remove the
limitations that the original dataplane and the IOThread/AioContext
approach that followed it.
Emanuele Giuseppe Esposito had the splendid determination to convert
large parts of the codebase so that they no longer needed the AioContext
lock. This was a painstaking process, both in the actual code changes
required and the iterations of code review that Emanuele eked out of
Kevin and me over many months.
Kevin Wolf tackled multitudes of graph locking conversions to protect
in-flight I/O from run-time changes to the block graph as well as the
clang Thread Safety Analysis annotations that allow the compiler to
check whether the graph lock is being used correctly.
And me, well, I'm just here to add some pizzazz to the QEMU multi-queue
block layer :). Thank you to everyone who helped with this effort,
including Eric Blake, code reviewer extraordinaire, and others who I've
forgotten to mention.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-11-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the AioContext lock no longer exists, AIO_WAIT_WHILE() and
AIO_WAIT_WHILE_UNLOCKED() are equivalent.
A future patch will get rid of AIO_WAIT_WHILE_UNLOCKED().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-10-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_co_lock() and bdrv_co_unlock() functions are already no-ops.
Remove them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231205182011.1976568-8-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop acquiring/releasing the AioContext lock in
bdrv_graph_wrlock()/bdrv_graph_unlock() since the lock no longer has any
effect.
The distinction between bdrv_graph_wrunlock() and
bdrv_graph_wrunlock_ctx() becomes meaningless and they can be collapsed
into one function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: bc4e68d362 "hw/ufs: Initial commit for emulated Universal-Flash-Storage"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Almost all functions that access bs->file already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-25-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK to some driver callbacks that are already called
with the graph lock held, and which will need the annotation because
they access bs->file, but don't have it yet.
This also covers a few callbacks that were not marked GRAPH_RDLOCK
before, but where updating BlockDriver is trivially possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-21-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_change_backing_file() is called both inside and outside coroutine
context. This makes it difficult for it to take the graph lock
internally. It also means that driver implementations need to be able to
run outside of coroutines, too. Switch it to the usual model with a
coroutine based implementation and a co_wrapper instead. The new
function is marked GRAPH_RDLOCK.
As the co_wrapper now runs the function in the AioContext of the node
(as it should always have done), this is not GLOBAL_STATE_CODE() any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-20-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all functions that access bs->backing already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-18-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling bdrv_replace_node(). Its callers may already want
to hold the graph lock and so wouldn't be able to call functions that
take it internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-17-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling bdrv_set_backing_hd_drained(). Basically everthing
in the function needs the lock and its callers may already want to hold
the graph lock and so wouldn't be able to call functions that take it
internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-14-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_cow_child() need to hold a reader lock for the graph because it
accesses bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-13-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_filter_child() need to hold a reader lock for the graph because it
accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-12-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_chain_contains() need to hold a reader lock for the graph because
it calls bdrv_filter_or_cow_bs(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-11-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_(un)freeze_backing_chain() need to hold a reader lock for the
graph because it calls bdrv_filter_or_cow_child(), which accesses
bs->file/backing.
Use the opportunity to make bdrv_is_backing_chain_frozen() static, it
has no external callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-10-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_skip_filters() need to hold a reader lock for the graph because it
calls bdrv_filter_child(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-9-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_skip_implicit_filters() need to hold a reader lock for the graph
because it calls bdrv_filter_child(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_filter_or_cow_bs() need to hold a reader lock for the graph because
it calls bdrv_filter_or_cow_child(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling block_job_add_bdrv(). These callers will typically
already hold the graph lock once the locking work is completed, which
means that they can't call functions that take it internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling bdrv_root_attach_child(). These callers will
typically already hold the graph lock once the locking work is
completed, which means that they can't call functions that take it
internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_filter_bs() need to hold a reader lock for the graph because
it calls bdrv_filter_child(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_has_zero_init() need to hold a reader lock for the graph because
it calls bdrv_filter_bs(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_probe_blocksizes() need to hold a reader lock for the graph because
it calls bdrv_filter_bs(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-9-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which will allow changing job-type-specific options after job
creation.
In the JobVerbTable, the same allow bits as for set-speed are used,
because set-speed can be considered an existing change command.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the code that ufs-lu was duplicating from
scsi-hd and allows them to share code.
It makes ufs-lu have a virtual scsi-bus and scsi-hd internally.
This allows scsi related commands to be passed thorugh to the scsi-hd.
The query request and nop command work the same as the existing logic.
Well-known lus do not have a virtual scsi-bus and scsi-hd, and
handle the necessary scsi commands by emulating them directly.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
This patch fixes invalid ufs register fields.
This fixes an issue reported by Bin Meng that
caused ufs to fail over riscv.
Fixes: bc4e68d362 ("hw/ufs: Initial commit for emulated Universal-Flash-Storage")
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reported-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Bin Meng <bmeng@tinylab.org>
bdrv_graph_wrlock() can't run in a coroutine (because it polls) and
requires holding the BQL. We already have GLOBAL_STATE_CODE() to assert
the latter. Assert the former as well and add a no_coroutine_fn marker.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-23-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all functions that access the child links already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-22-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all functions that access the parent link already take the graph
lock now. Add locking to the remaining user in a test case and finally
annotate the struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-21-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_get_specific_info() need to hold a reader lock for the graph.
This removes an assume_graph_lock() call in vmdk's implementation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-20-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_apply_auto_read_only() need to hold a reader lock for the graph
because it calls bdrv_can_set_read_only(), which indirectly accesses the
parents list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-19-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_op_is_blocked() need to hold a reader lock for the graph
because it calls bdrv_get_device_or_node_name(), which accesses the
parents list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-18-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
