Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If there are less than 2 arguments in version_ge(), the second
'shift' prints this error:
../configure: line 232: shift: shift count out of range
As Eric suggested, we can use 'shift ${2:+2}' which works out to
'shift 2' if $2 is set, or 'shift' (implicitly shift 1) if $2
is not set.
This patch replaces both 'shift; shift' occurrences in version_ge()
with 'shift ${2:+2}'.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200821203558.10338-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DFPU doesn't have pre-increment FP load/store opcodes, it has
post-increment opcodes instead. Test increment opcodes present in the
current config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU sets Invalid flag in FSR when at least one argument of FP
comparison opcodes is NaN, SNaN for most opcodes, any NaN for olt/ole.
Add checks for FSR and expected FSR values.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Test that madd doesn't do rounding after multiplication.
Test NaN propagation rules for FPU2000 and DFPU madd opcode.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Space for test results may be allocated in IRAM which is only
word-accessible. Use full 32-bit words to access test results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This does not implement all opcodes related to div/sqrt as specified in
the xtensa ISA, partly because the official specification is not
complete and partly because precise implementation is unnecessarily
complex. Instead instructions specific to the div/sqrt sequences are
implemented differently, most of them as nops, but the results of
div/sqrt sequences is preserved.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU may be configured with 32-bit or with 64-bit registers. Xtensa ISA
does not specify how single-precision values are stored in 64-bit
registers. Existing implementations store them in the low half of the
registers.
Add value extraction and write back to single-precision opcodes.
Add new double precision opcodes. Add 64-bit register file.
Add 64-bit values dumping to the xtensa_cpu_dump_state.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Double precision floating point unit is a FPU implementation different
from the FPU2000 in the following ways:
- it may be configured with only single or with both single and double
precision operations support;
- it may be configured with division and square root opcodes;
- FSR register accumulates inValid, division by Zero, Overflow,
Underflow and Inexact result flags of operations;
- QNaNs and SNaNs are handled properly;
- NaN propagation rules are different.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
BR registers used in FPU comparison opcodes are available as opcode
arguments for translators. Use them. This simplifies comparison helpers
interface and makes them usable in FLIX bundles.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move FSR/FCR register accessors from core opcodes to FPU2000 opcodes as
they are FPU2000-specific.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add _s suffix to all FPU2000 opcode translators and helpers that also
have double-precision variant to unify naming and allow adding DFPU
implementations. Add _fpu2k_ to the names of helpers that will have
different implementation for the DFPU .
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FLIX dependency breaking code assumes that all registers are 32 bit
wide. This may not always be correct.
Extract actual register width from the associated register file and use
it to create temporaries of correct width and generate correct data
movement instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Register file name may not uniquely identify a register file in the set
of configurations. E.g. floating point registers may have different size
in different configurations. Use register file geometry as additional
identifier.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
pickNaNMulAdd logic on Xtensa is to apply pickNaN to the inputs of the
expression (a * b) + c. However if default NaN is produces as a result
of (a * b) calculation it is not considered when c is NaN.
So with two pickNaN variants there must be two pickNaNMulAdd variants.
In addition the invalid flag is always set when (a * b) produces NaN.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Pass float_status structure pointer to the pickNaN so that
machine-specific settings are available to NaN selection code.
Add use_first_nan property to float_status and use it in Xtensa-specific
pickNaN.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
target/xtensa, the only user of NO_SIGNALING_NANS macro has FPU
implementations with and without the corresponding property. With
NO_SIGNALING_NANS being a macro they cannot be a part of the same QEMU
executable.
Replace macro with new property in float_status to allow cores with
different FPU implementations coexist.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When NMI is configured it is taken regardless of INTENABLE SR contents,
PS.INTLEVEL or PS.EXCM. It is cleared automatically once it's taken.
Add nmi_level to XtensaConfig, puth there NMI level from the overlay or
XCHAL_NUM_INTLEVELS + 1 when NMI is not configured. Add NMI mask to
INTENABLE SR and limit CINTLEVEL to nmi_level - 1 when determining
pending IRQ level in check_interrupt(). Always take and clear pending
interrupt at nmi_level in the handle_interrupt().
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's XtensaOpcodeOps::test_ill that is used to check whether opcode
generates illegal opcode exception or not. The illegal opcode exception
is not special and so this callback can be generalized to provide any
XTENSA_OP_* flags that are not completely static.
Introduce XtensaOpcodeOps::test_exceptions and convert all test_ill
users to test_exceptions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libqemuutil.a build fails with this error:
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `get_sqe':
qemu/build/../util/fdmon-io_uring.c:83: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:92: undefined reference to `io_uring_submit'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:96: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_wait':
qemu/build/../util/fdmon-io_uring.c:289: undefined reference to `io_uring_submit_and_wait'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_setup':
qemu/build/../util/fdmon-io_uring.c:328: undefined reference to `io_uring_queue_init'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_destroy':
qemu/build/../util/fdmon-io_uring.c:343: undefined reference to `io_uring_queue_exit'
collect2: error: ld returned 1 exit status
This patch fix the issue adding 'linux_io_uring' dependency for
fdmon-io_uring.c
Fixes: a81df1b68b ("libqemuutil, qapi, trace: convert to meson")
Cc: pbonzini@redhat.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200821154853.94379-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the SD spec, Standard Capacity SD Memory Card (SDSC) supports
capacity up to and including 2 GiB.
Fixes: 2d7adea4fe ("hw/sd: Support SDHC size cards")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-Id: <1598021136-49525-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
At present the function switch status data structure bit [399:376]
are wrongly pupulated. These 3 bytes encode function switch status
for the 6 function groups, with 4 bits per group, starting from
function group 6 at bit 399, then followed by function group 5 at
bit 395, and so on.
However the codes mistakenly fills in the function group 1 status
at bit 399. This fixes the code logic.
Fixes: a1bb27b1e9 ("SD card emulation (initial implementation)")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-Id: <1598021136-49525-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the recently added sdbus_read_data() to read multiple
bytes at once, instead of looping calling sdbus_read_byte().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-8-f4bug@amsat.org>
Add a sdbus_read_data() method to read multiple bytes on the
data line of a SD bus.
We might improve the tracing later, for now keep logging each
byte individually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-7-f4bug@amsat.org>
Use the recently added sdbus_write_data() to write multiple
bytes at once, instead of looping calling sdbus_write_byte().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-6-f4bug@amsat.org>
Add a sdbus_write_data() method to write multiple bytes on the
data line of a SD bus.
We might improve the tracing later, for now keep logging each
byte individually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-5-f4bug@amsat.org>
The sdbus_read_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_read_byte() and document it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-4-f4bug@amsat.org>
The sdbus_write_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_write_byte() and document it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-3-f4bug@amsat.org>
The read/write_data() methods write do a single byte access
on the data line of a SD card. Rename them as read/write_byte().
Add some documentation (not in "hw/sd/sdcard_legacy.h" which we
are going to remove soon).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-2-f4bug@amsat.org>
omap_mmc.c is the last device left using the legacy sdcard API.
Move the prototype declarations into a separate header, to
make it clear this is a legacy API.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180216022933.10945-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
sd_data_ready() belongs to the legacy API. As its last user has
been converted to the SDBus API, make it static.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180216022933.10945-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Convert disabled DPRINTF() to trace events and remove ifdef'ry.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-9-f4bug@amsat.org>
SD/MMC host controllers provide a SD Bus to plug SD cards,
but don't come with SD card plugged in :) Let the machine/board
model create and plug the SD cards when required.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-8-f4bug@amsat.org>
Convert the controller to the SDBus API:
- add the a TYPE_PL181_BUS object of type TYPE_SD_BUS,
- adapt the SDBusClass set_inserted/set_readonly handlers
- create the bus in the PL181 controller
- switch legacy sd_*() API to the sdbus_*() API.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-7-f4bug@amsat.org>
To make the code easier to manage/review/use, rename the
cardstatus[0] variable as 'card_readonly' and name the GPIO
"card-read-only".
Similarly with cardstatus[1], renamed as 'card_inserted' and
name its GPIO "card-inserted".
Adapt the users accordingly by using the qdev_init_gpio_out_named()
function.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-6-f4bug@amsat.org>
Add TODO to use Fifo32 API from "qemu/fifo32.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-4-f4bug@amsat.org>
pl181_send_command() do a bus transaction (send or receive),
rename it as pl181_do_command().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-3-f4bug@amsat.org>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <488ba8d4c562ea44119de8ea0f385a898bd8fa1e.1513790495.git.alistair.francis@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
