The extended desktop resize encoding adds support for (a) clients
sending resize requests to the server, and (b) multihead support.
This patch implements (a). All resize requests are rejected by qemu.
Qemu can't resize the framebuffer on its own, this is in the hands of
the guest, so all qemu can do is forward the request to the guest.
Should the guest actually resize the framebuffer we can notify the vnc
client later with a separate message.
This requires support in the display device. Works with virtio-gpu.
https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#extendeddesktopsize-pseudo-encoding
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-4-kraxel@redhat.com
qemu sends various state info like current cursor shape to newly connected
clients in response to a set_encoding message. This is not correct according
to the rfb spec. Send that information in response to a full (incremental=0)
framebuffer update request instead. Also send the resize information
unconditionally, not only in case of an actual server-side change.
This makes the qemu vnc server conform to the spec and allows clients to
request the complete vnc server state without reconnect.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-3-kraxel@redhat.com
Move the check whenever a cursor exists into the vnc_cursor_define()
function so callers don't have to do it.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-2-kraxel@redhat.com
The "XVP" (Xen VNC Proxy) extension defines a mechanism for a VNC client
to issue power control requests to trigger graceful shutdown, reboot, or
hard reset.
This option is not enabled by default, since we cannot assume that users
with VNC access implicitly have administrator access to the guest OS.
Thus is it enabled with a boolean "power-control" option e.g.
-vnc :1,power-control=on
While, QEMU can easily support shutdown and reset, there's no easy way
to wire up reboot support at this time. In theory it could be done by
issuing a shutdown, followed by a reset, but there's no convenient
wiring for such a pairing in QEMU. It also isn't possible to have the
VNC server directly talk to QEMU guest agent, since the agent chardev is
typically owned by an external mgmt app.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[ kraxel: rebase to master ]
[ kraxel: add missing break ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In vnc_display_open(), if tls-creds is enabled, do object_ref(object
ref 1->2) for tls-creds. While in vnc_display_close(), object_unparent
sets object ref to 1(2->1) and unparent the object for root.
Problem:
1. the object can not be found from the objects_root, while the object
is not finalized.
2. the qemu_opts of tls-creds(id: creds0) is not deleted, so new tls
object with the same id(creds0) can not be delete & add.
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210111131911.805-1-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When running QEMU's GTK UI without EGL or OGL, the
gd_monitor_update_interval function gets executed and the display refresh
rate gets updated accordingly. However, when using EGL or just regular
OGL, the function never gets executed.
Which is why I decided that the function should be in gd_egl_refresh
where the display output gets updated, in the same vain as how it's done
for normal GTK UIs (aka. those without EGL) - in it's display refresh
function.
Since the gd_monitor_update_interval function now is exposed, we are
going to use it to update the refresh rate.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Message-Id: <20210114140153.301473-3-pavlica.nikola@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The gd_egl_refresh function, as the name suggests, is responsible for
refreshing displays when using EGL graphics with QEMU's GTK UI. This is
a perfect candidate for a function to update the refresh rate in.
Since gd_monitor_update_interval is inaccessible from the gd_egl_refresh
function, we need to expose/globalize it in the include/ui/gtk.h file.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Message-Id: <20210114140153.301473-2-pavlica.nikola@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the virtual console maximum update interval to
GUI_REFRESH_INTERVAL_DEFAULT. This papers over a integer
overflow bug in gtk3 on Windows where the reported monitor
refresh frequency can be much smaller than the real refresh
frequency.
The gtk bug report can be found here:
https://gitlab.gnome.org/GNOME/gtk/-/issues/3394
On my Windows 10 system gtk reports a monitor refresh rate of
1.511Hz instead of 60.031Hz and slows down the screen update
rate in qemu to a crawl. Provided you are affected by the gtk
bug on Windows, these are the steps to reproduce the issue:
Start qemu with -display gtk and activate all qemu virtual
consoles and notice the reduced qemu refresh rate. Activating
all virtual consoles is necessary, because gui_update() in
ui/console.c uses the minimum of all display change listeners
update interval and not yet activated virtual consoles report
the default update interval (30ms).
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The type of the variable window is GtkWidget. Rename the variable
from window to widget, because windows and widgets are different
things.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Redefining SI prefixes is always wrong. 1s has per definition
1000ms. Remove the misnamed named constant and replace it with
a comment explaining the frequency to period conversion in two
simple steps. Now you can cancel out the unit mHz in the comment
with the implicit unit mHz in refresh_rate_millihz and see why
the implicit unit ms for update_interval remains.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201213165724.13418-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now move the logic verbatim. GTK+ actually has a hard requirement
on X11 if gtk+x11 is present, but we will sort that out later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU documentation can't be opened if QEMU is run from build tree
because executables are placed in the top of build tree after conversion
to meson.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vnc_write() should be locked after the RFB protocol is initialized.
Fixes: 0c426e4534 ("vnc: Add support for color map")
Cc: qemu-stable@nongnu.org
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Message-id: 20201116141338.148911-1-liangpeng10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a new vnc extension for cursors with an alpha channel. Use
it if supported by the vnc client, prefer it over the "rich cursor"
extension which supports only a bitmask for transparency.
This is a visible improvement especially on modern desktops which
actually use the alpha channel when defining cursors.
https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#cursor-with-alpha-pseudo-encoding
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-7-kraxel@redhat.com
vnc stopped using the copyrect pseudo encoding in 2017, in commit
50628d3479 ("cirrus/vnc: zap bitblit support from console code.")
So we can drop the now unused copyrect feature bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-5-kraxel@redhat.com
Use an enum for the vnc feature bits. That way they are enumerated
automatically and we don't have to do that manually when adding or
removing features.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201208115737.18581-4-kraxel@redhat.com
Use active_console in that case like we do in many other places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-3-kraxel@redhat.com
Add missing sanity check.
Reproducer: run qemu with "-device qxl" but without "-spice ..."
Fixes: 0d9b90ce5c ("console: make QMP/HMP screendump run in coroutine")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201124122936.30588-1-kraxel@redhat.com
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In graphic_hw_update(), first select an existing console,
a specific-console or active_console(if not specified),
then updating the console.
Signed-off-by: lichun <lichun@ruijie.com.cn>
Message-id: 1604682219-114389-1-git-send-email-lichun@ruijie.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we connect to vnc by websocket channel, and disconnect
(maybe by some network exception) before handshake,
qemu will left CLOSE_WAIT socket and never close it
After 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
and dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource"),
the vnc call qio_channel_add_watch only care about G_IO_IN,
but mising G_IO_HUP and G_IO_ERR.
When the websocket channel get EOF or error, it cannot callback,
because the caller ignore the event, that leads to resource leak
We need handle G_IO_HUP and G_IO_ERR event, then cleanup the channel
Fixes: 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
Fixes: dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Message-id: 20201029032241.11040-1-dinghui@sangfor.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.
The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function is going to be called from a coroutine, and may yield.
Let's ensure our image reference doesn't change over time (due to resize
etc) by keeping a ref.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Removes opengl dependency from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 66 to 60 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-15-kraxel@redhat.com
Build spice core code as module. This removes libspice-server and a
handful of indirect dependencies from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 73 to 66 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-13-kraxel@redhat.com
Rename qmp_query_spice() to qmp_query_spice_real(), add to QemuSpiceOps.
Add new qmp_query_spice() function which calls the real function via
QemuSpiceOps if available, otherwise return SpiceInfo.enabled = false.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-9-kraxel@redhat.com
