When a fd is opened using inotify_init(), a read provides
one or more inotify_event structures:
struct inotify_event {
int wd;
uint32_t mask;
uint32_t cookie;
uint32_t len;
char name[];
};
The integer fields must be byte-swapped to the target endianness.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a fd is opened using eventfd(), a read provides
a 64bit counter in the host byte order, and a
write increase the internal counter by the provided
64bit value.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As for sendmsg() or sendto(), we must call the target to
host data translator if it is defined. This is needed for
eventfd(): the write() syscall allows to add a value to
the internal counter, and so, it must be byte-swapped to
the host order.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
commit 1a8d61ddbf ("pc: ACPI BIOS: use highest NUMA node for hotplug mem
hole SRAT entry") changed generated SRAT tables, update expected files
accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For reasons unknown, Windows won't online all memory, both at command
line and hot-plugged later, unless the hotplug mem hole SRAT entry
specifies a node greater than or equal to the ones where memory is
added.
Using the highest node on the machine makes recent versions of Windows
happy.
With this example command line:
... \
-m 1024,slots=4,maxmem=32G \
-numa node,nodeid=0 \
-numa node,nodeid=1 \
-numa node,nodeid=2 \
-numa node,nodeid=3 \
-object memory-backend-ram,size=1G,id=mem-mem1 \
-device pc-dimm,id=dimm-mem1,memdev=mem-mem1,node=1
Windows reports a total of 1G of RAM without this commit and the expected
2G with this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
When forwarding TCP packets, the internal tcpiphdr struct length was wrongly
used inside the IP header. This commit changes the behaviour to what is used
by tcp_output.c, using the correct full IP header + payload length.
Signed-off-by: Sjors Gielen <sjors@sjorsgielen.nl>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Spotted by ASAN:
/x86_64/hmp/pc-0.12:
=================================================================
==22538==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 224 byte(s) in 1 object(s) allocated from:
#0 0x7f0f63cdee60 in malloc (/lib64/libasan.so.3+0xc6e60)
#1 0x556f11ff32d7 in tcp_newtcpcb /home/elmarco/src/qemu/slirp/tcp_subr.c:250
#2 0x556f11fdb1d1 in tcp_listen /home/elmarco/src/qemu/slirp/socket.c:688
#3 0x556f11fca9d5 in slirp_add_hostfwd /home/elmarco/src/qemu/slirp/slirp.c:1052
#4 0x556f11f8db41 in slirp_hostfwd /home/elmarco/src/qemu/net/slirp.c:506
#5 0x556f11f8dd83 in hmp_hostfwd_add /home/elmarco/src/qemu/net/slirp.c:535
There might be a better way to fix this, but calling slirp tcp_close()
doesn't work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This bug was introduced by https://github.com/qemu/qemu/commit/98c6305
Signed-off-by: Tao Wu <lepton@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-bu: Samuel Thibault <samuel.thibault@ens-lyon.org>
Implement NVMe Controller Memory Buffers (CMBs) which were added in
version 1.2 of the NVMe Specification. This patch adds an optional
argument (cmb_size_mb) which indicates the size of the CMB (in
MB). Currently only the Submission Queue Support (SQS) is enabled
which aligns with the current Linux driver for NVMe.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the case in our docker tests, as we use --net=none there. Skip
this method.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a small test for the image streaming error path for failing
block_job_create(), which would have found the null pointer dereference
in commit a170a91f.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
The code that tries to reopen a BlockDriverState in stream_start()
when the creation of a new block job fails crashes because it attempts
to dereference a pointer that is known to be NULL.
This is a regression introduced in a170a91fd3,
likely because the code was copied from stream_complete().
Cc: qemu-stable@nongnu.org
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
process_message_reply() was recently updated to get full message
content instead of only its request field.
There is no need to copy all the struct content into the stack,
so just pass its pointer as const.
Reviewed-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch adds a new internal "x-mtu-bypass-backend" property
to bypass backends for MTU feature negotiation.
When this property is set, the MTU feature is negotiated as soon
as supported by the guest and a MTU value is set via the host_mtu
parameter. In case the backend advertises the feature (e.g. DPDK's
vhost-user backend), the feature negotiation is propagated down to
the backend.
When this property is not set, the backend has to support the MTU
feature for its negotiation to succeed.
For compatibility purpose, this property is disabled for machine
types v2.9 and older.
Cc: Aaron Conole <aconole@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is for compatibility.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Hardware support for VT-d device passthrough. Although current Linux can
live with iommu=pt even without this, but this is faster than when using
software passthrough.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
When device-iotlb is not specified, we should fail this check. A new
function vtd_ce_type_check() is introduced.
While I'm at it, clean up the vtd_dev_to_context_entry() a bit - replace
many "else if" usage into direct if check. That'll make the logic more
clear.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
We have that now, so why not use it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Helper to fetch VT-d context entry type.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
The old names are too long and less ordered. Let's start to use
vtd_ce_*() as a pattern.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
No reason to keep tens of lines if we can do it actually far shorter.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
We were always passing in that one as "false" to assume that's an read
operation, and we also assume that IOMMU translation would always have
that read permission. A better permission would be IOMMU_NONE since the
replay is after all not a real read operation, but just a page table
rebuilding process.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
When using the mapped-file security, credentials are stored in a metadata
directory located in the parent directory. This is okay for all paths with
the notable exception of the root path, since we don't want and probably
can't create a metadata directory above the virtfs directory on the host.
This patch introduces a dedicated metadata file, sitting in the virtfs root
for this purpose. It relies on the fact that the "." name necessarily refers
to the virtfs root.
As for the metadata directory, we don't want the client to see this file.
The current code only cares for readdir() but there are many other places
to fix actually. The filtering logic is hence put in a separate function.
Before:
# ls -ld
drwxr-xr-x. 3 greg greg 4096 May 5 12:49 .
# chown root.root .
chown: changing ownership of '.': Is a directory
# ls -ld
drwxr-xr-x. 3 greg greg 4096 May 5 12:49 .
After:
# ls -ld
drwxr-xr-x. 3 greg greg 4096 May 5 12:49 .
# chown root.root .
# ls -ld
drwxr-xr-x. 3 root root 4096 May 5 12:50 .
and from the host:
ls -al .virtfs_metadata_root
-rwx------. 1 greg greg 26 May 5 12:50 .virtfs_metadata_root
$ cat .virtfs_metadata_root
virtfs.uid=0
virtfs.gid=0
Reported-by: Leo Gaspard <leo@gaspard.io>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Leo Gaspard <leo@gaspard.io>
[groug: work around a patchew false positive in
local_set_mapped_file_attrat()]
The logic to open a path currently sits between local_open_nofollow() and
the relative_openat_nofollow() helper, which has no other user.
For the sake of clarity, this patch moves all the code of the helper into
its unique caller. While here we also:
- drop the code to skip leading "/" because the backend isn't supposed to
pass anything but relative paths without consecutive slashes. The assert()
is kept because we really don't want a buggy backend to pass an absolute
path to openat().
- use strchrnul() to get a simpler code. This is ok since virtfs is for
linux+glibc hosts only.
- don't dup() the initial directory and add an assert() to ensure we don't
return the global mountfd to the caller. BTW, this would mean that the
caller passed an empty path, which isn't supposed to happen either.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[groug: fixed typos in changelog]
When using the mapped-file security mode, the creds of a path /foo/bar
are stored in the /foo/.virtfs_metadata/bar file. This is okay for all
paths unless they end with '.' or '..', because we cannot create the
corresponding file in the metadata directory.
This patch ensures that '.' and '..' are resolved in all paths.
The core code only passes path elements (no '/') to the backend, with
the notable exception of the '/' path, which refers to the virtfs root.
This patch preserves the current behavior of converting it to '.' so
that it can be passed to "*at()" syscalls ('/' would mean the host root).
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
These v9fs_co_name_to_path() call sites have always been around. I guess
no care was taken to check the return value because the name_to_path
operation could never fail at the time. This is no longer true: the
handle and synth backends can already fail this operation, and so will the
local backend soon.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
The utimensat() and futimens() syscalls have been around for ages (ie,
glibc 2.6 and linux 2.6.22), and the decision was already taken to
switch to utimensat() anyway when fixing CVE-2016-9602 in 2.9.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since chroot() doesn't change the current directory, it is indeed a good
practice to chdir() to the target directory and then then chroot(), or
to chroot() to the target directory and then chdir("/").
The current code does neither of them actually. Let's go for the latter.
This doesn't fix any security issue since all of this takes place before
the helper begins to process requests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
When trying to remove a file from a directory, both created in non-mapped
mode, the file remains and EBADF is returned to the guest.
This is a regression introduced by commit "df4938a6651b 9pfs: local:
unlinkat: don't follow symlinks" when fixing CVE-2016-9602. It changed the
way we unlink the metadata file from
ret = remove("$dir/.virtfs_metadata/$name");
if (ret < 0 && errno != ENOENT) {
/* Error out */
}
/* Ignore absence of metadata */
to
fd = openat("$dir/.virtfs_metadata")
unlinkat(fd, "$name")
if (ret < 0 && errno != ENOENT) {
/* Error out */
}
/* Ignore absence of metadata */
If $dir was created in non-mapped mode, openat() fails with ENOENT and
we pass -1 to unlinkat(), which fails in turn with EBADF.
We just need to check the return of openat() and ignore ENOENT, in order
to restore the behaviour we had with remove().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[groug: rewrote the comments as suggested by Eric]
Only pdu_complete() needs to notify the client that a request has completed.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The code only uses well known format strings. An unknown format token is a
bug.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
These bits aren't related to the transport so let's move them to the core
code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Now that ICPState objects get finalized on CPU unplug, we should unregister
reset handlers as well to avoid a QEMU crash at machine reset time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a LMB hot unplug starts, the current DRC LMB status is stored at
spapr->pending_dimm_unplugs QTAILQ. This queue isn't migrated, thus
if a migration occurs in the middle of a LMB unplug the
spapr_lmb_release callback will lost track of the LMB unplug progress.
This patch implements a new recover function spapr_recover_pending_dimm_state
that is used inside spapr_lmb_release to recover this DRC LMB release
status that is lost during the migration.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Minor stylistic changes, simplify error handling]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In pseries, a firmware abstraction called Dynamic Reconfiguration
Connector (DRC) is used to assign a particular dynamic resource
to the guest and provide an interface to manage configuration/removal
of the resource associated with it. In other words, DRC is the
'plugged state' of a device.
Before this patch, DRC wasn't being migrated. This causes
post-migration problems due to DRC state mismatch between source and
target. The DRC state of a device X in the source might
change, while in the target the DRC state of X is still fresh. When
migrating the guest, X will not have the same hotplugged state as it
did in the source. This means that we can't hot unplug X in the
target after migration is completed because its DRC state is not consistent.
https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1677552 is one
bug that is caused by this DRC state mismatch between source and
target.
To migrate the DRC state, we defined the VMStateDescription struct for
spapr_drc to enable the transmission of spapr_drc state in migration.
Not all the elements in the DRC state are migrated - only those
that can be modified by guest actions or device add/remove
operations:
- 'isolation_state', 'allocation_state' and 'indicator_state'
are involved in the DR state transition diagram from
PAPR+ 2.7, 13.4;
- 'configured', 'signalled', 'awaiting_release' and 'awaiting_allocation'
are needed in attaching and detaching devices;
- 'indicator_state' provides users with hardware state information.
These are the DRC elements that are migrated.
In this patch the DRC state is migrated for PCI, LMB and CPU
connector types. At this moment there is no support to migrate
DRC for the PHB (PCI Host Bridge) type.
In the 'realize' function the DRC is registered using vmstate_register,
similar to what hw/ppc/spapr_iommu.c does in 'spapr_tce_table_realize'.
This approach works because DRCs are bus-less and do not sit
on a BusClass that implements bc->get_dev_path, so as a fallback the
VMSD gets identified via "spapr_drc"/get_index(drc).
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pointer drc->detach_cb is being used as a way of informing
the detach() function inside spapr_drc.c which cb to execute. This
information can also be retrieved simply by checking drc->type and
choosing the right callback based on it. In this context, detach_cb
is redundant information that must be managed.
After the previous spapr_lmb_release change, no detach_cb_opaques
are being used by any of the three callbacks functions. This is
yet another information that is now unused and, on top of that, can't
be migrated either.
This patch makes the following changes:
- removal of detach_cb_opaque. the 'opaque' argument was removed from
the callbacks and from the detach() function of sPAPRConnectorClass. The
attribute detach_cb_opaque of sPAPRConnector was removed.
- removal of detach_cb from the detach() call. The function pointer
detach_cb of sPAPRConnector was removed. detach() now uses a
switch(drc->type) to execute the apropriate callback. To achieve this,
spapr_core_release, spapr_lmb_release and spapr_phb_remove_pci_device_cb
callbacks were made public to be visible inside detach().
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LMB DRC release callback, spapr_lmb_release(), uses an opaque
parameter, a sPAPRDIMMState struct that stores the current LMBs that
are allocated to a DIMM (nr_lmbs). After each call to this callback,
the nr_lmbs is decremented by one and, when it reaches zero, the callback
proceeds with the qdev calls to hot unplug the LMB.
Using drc->detach_cb_opaque is problematic because it can't be migrated in
the future DRC migration work. This patch makes the following changes to
eliminate the usage of this opaque callback inside spapr_lmb_release:
- sPAPRDIMMState was moved from spapr.c and added to spapr.h. A new
attribute called 'addr' was added to it. This is used as an unique
identifier to associate a sPAPRDIMMState to a PCDIMM element.
- sPAPRMachineState now hosts a new QTAILQ called 'pending_dimm_unplugs'.
This queue of sPAPRDIMMState elements will store the DIMM state of DIMMs
that are currently going under an unplug process.
- spapr_lmb_release() will now retrieve the nr_lmbs value by getting the
correspondent sPAPRDIMMState. A helper function called spapr_dimm_get_address
was created to fetch the address of a PCDIMM device inside spapr_lmb_release.
When nr_lmbs reaches zero and the callback proceeds with the qdev hot unplug
calls, the sPAPRDIMMState struct is removed from spapr->pending_dimm_unplugs.
After these changes, the opaque argument for spapr_lmb_release is now
unused and is passed as NULL inside spapr_del_lmbs. This and the other
opaque arguments can now be safely removed from the code.
As an additional cleanup made by this patch, the spapr_del_lmbs function
was merged with spapr_memory_unplug_request. The former was being called
only by the latter and both were small enough to fit one single function.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Minor stylistic cleanups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On current released versions of glusterfs, glfs_lseek() will sometimes
return invalid values for SEEK_DATA or SEEK_HOLE. For SEEK_DATA and
SEEK_HOLE, the returned value should be >= the passed offset, or < 0 in
the case of error:
LSEEK(2):
off_t lseek(int fd, off_t offset, int whence);
[...]
SEEK_HOLE
Adjust the file offset to the next hole in the file greater
than or equal to offset. If offset points into the middle of
a hole, then the file offset is set to offset. If there is no
hole past offset, then the file offset is adjusted to the end
of the file (i.e., there is an implicit hole at the end of
any file).
[...]
RETURN VALUE
Upon successful completion, lseek() returns the resulting
offset location as measured in bytes from the beginning of the
file. On error, the value (off_t) -1 is returned and errno is
set to indicate the error
However, occasionally glfs_lseek() for SEEK_HOLE/DATA will return a
value less than the passed offset, yet greater than zero.
For instance, here are example values observed from this call:
offs = glfs_lseek(s->fd, start, SEEK_HOLE);
if (offs < 0) {
return -errno; /* D1 and (H3 or H4) */
}
start == 7608336384
offs == 7607877632
This causes QEMU to abort on the assert test. When this value is
returned, errno is also 0.
This is a reported and known bug to glusterfs:
https://bugzilla.redhat.com/show_bug.cgi?id=1425293
Although this is being fixed in gluster, we still should work around it
in QEMU, given that multiple released versions of gluster behave this
way.
This patch treats the return case of (offs < start) the same as if an
error value other than ENXIO is returned; we will assume we learned
nothing, and there are no holes in the file.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Message-id: 87c0140e9407c08f6e74b04131b610f2e27c014c.1495560397.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
All block jobs are using block_job_defer_to_main_loop as the final
step just before the coroutine terminates. At this point,
block_job_enter should do nothing, but currently it restarts
the freed coroutine.
Now, the job->co states should probably be changed to an enum
(e.g. BEFORE_START, STARTED, YIELDED, COMPLETED) subsuming
block_job_started, job->deferred_to_main_loop and job->busy.
For now, this patch eliminates the problematic reenter by
removing the reset of job->deferred_to_main_loop (which served
no purpose, as far as I could see) and checking the flag in
block_job_enter.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-12-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This splits the part that touches job states from the part that invokes
callbacks. It will make the code simpler to understand once job states will
be protected by a different mutex than the AioContext lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-11-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Unlike test-blockjob-txn, QMP releases the reference to the transaction
before the jobs finish. Thus, qemu-iotest 124 showed a failure while
working on the next patch that the unit tests did not have. Make
the test a little nastier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-10-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Yet another pure code movement patch, preparing for the next change.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-9-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The new functions helps respecting the invariant that the coroutine
is entered with false user_resume, zero pause count and no error
recorded in the iostatus.
Resetting the iostatus is now common to all of block_job_cancel_async,
block_job_user_resume and block_job_iostatus_reset, albeit with slight
differences:
- block_job_cancel_async resets the iostatus, and resumes the job if
there was an error, but the coroutine is not restarted immediately.
For example the caller may continue with a call to block_job_finish_sync.
- block_job_user_resume resets the iostatus. It wants to resume the job
unconditionally, even if there was no error.
- block_job_iostatus_reset doesn't resume the job at all. Maybe that's
a bug but it should be fixed separately.
block_job_iostatus_reset does the least common denominator, so add some
checking but otherwise leave it as the entry point for resetting the
iostatus.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-8-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Outside blockjob.c, the block_job_iostatus_reset function is used once
in the monitor and once in BlockBackend. When we introduce the block
job mutex, block_job_iostatus_reset's client is going to be the block
layer (for which blockjob.c will take the block job mutex) rather than
the monitor (which will take the block job mutex by itself).
The monitor's call to block_job_iostatus_reset from the monitor comes
just before the sole call to block_job_user_resume, so reset the
iostatus directly from block_job_iostatus_reset. This will avoid
the need to introduce separate block_job_iostatus_reset and
block_job_iostatus_reset_locked APIs.
After making this change, move the function together with the others
that were moved in the previous patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-7-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We have two different headers for block job operations, blockjob.h
and blockjob_int.h. The former contains APIs called by the monitor,
the latter contains APIs called by the block job drivers and the
block layer itself.
Keep the two APIs separate in the blockjob.c file too. This will
be useful when transitioning away from the AioContext lock, because
there will be locking policies for the two categories, too---the
monitor will have to call new block_job_lock/unlock APIs, while blockjob
APIs will take care of this for the users.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170508141310.8674-6-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Remove use of block_job_pause/resume from outside blockjob.c, thus
making them static. The new functions are used by the block layer,
so place them in blockjob_int.h.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-5-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Outside blockjob.c, block_job_unref is only used when a block job fails
to start, and block_job_ref is not used at all. The reference counting
thus is pretty well hidden. Introduce a separate function to be used
by block jobs; because block_job_ref and block_job_unref now become
static, move them earlier in blockjob.c.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-4-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
