The function qemu_madvise() and the QEMU_MADV_* constants associated
with it are used in only 10 files. Move them out of osdep.h to a new
qemu/madvise.h header that is included where it is needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-2-peter.maydell@linaro.org
Temp pages will need to grow if we want to have multiple channels for postcopy,
because each channel will need its own temp page to cache huge page data.
Before doing that, cleanup the related code. No functional change intended.
Since at it, touch up the errno handling a little bit on the setup side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch simplifies unqueue_page() on both sides of it (itself, and caller).
Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock. IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway. Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().
Meanwhile, drop the dirty check. It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)). So that's not necessary too.
Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a helper to detect whether postcopy has pending request.
Since at it, cleanup the code a bit, e.g. in unqueue_page() we shouldn't need
to check it again on queue empty because we're the only one (besides cleanup
code, which should never run during this process) that will take a request off
the list, so the request list can only grow but not shrink under the hood.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch allows us to read the tid even without blocktime feature enabled.
It's useful when tracing postcopy fault thread on faulted pages to show thread
id too with the address.
Remove the comments - they're merely not helpful at all.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We used to do off-by-one fixup for pss->page when finished one host huge page
transfer. That seems to be unnecesary at all. Drop it.
Cc: Keqian Zhu <zhukeqian1@huawei.com>
Cc: Kunkun Jiang <jiangkunkun@huawei.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Replace direct manipulation of ram_counters.transferred with a
function.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_send_discard_bm_ram() always return zero. Since it can't
fail, simplify and do not return anything.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It will just never fail. Drop those return values where they're constantly
zeros.
A tiny touch-up on the tracepoint so trace_ram_postcopy_send_discard_bitmap()
is called after the logic itself (which sounds more reasonable).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now we loop ramblocks for twice, the 1st time chunk the dirty bits with
huge page information; the 2nd time we send the discard ranges. That's not
necessary - we can do them in a single loop.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This function calls three functions:
- postcopy_discard_send_init(ms, block->idstr);
- postcopy_chunk_hostpages_pass(ms, block);
- postcopy_discard_send_finish(ms);
However only the 2nd function call is meaningful. It's major role is to make
sure dirty bits are applied in host-page-size granule, so there will be no
partial dirty bits set for a whole host page if huge pages are used.
The 1st/3rd call are for latter when we want to send the disgard ranges.
They're mostly no-op here besides some tracepoints (which are misleading!).
Drop them, then we can directly drop postcopy_chunk_hostpages() as a whole
because we can call postcopy_chunk_hostpages_pass() directly.
There're still some nice comments above postcopy_chunk_hostpages() that explain
what it does. Copy it over to the caller's site.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It always return zero, because it just can't go wrong so far. Simplify the
code with no functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I planned to add "#ifdef DEBUG_POSTCOPY" around the function too because
otherwise it'll be compiled into qemu binary even if it'll never be used. Then
I found that maybe it's easier to just drop it for good..
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just a removal of an unused comment.
a0a8aa147a did many fixes and removed the parameter named "ms", but forget to remove the corresponding comment in function named "ram_save_host_page".
Signed-off-by: Xu Zheng <xuzheng@cmss.chinamobile.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Should qemu_savevm_state_iterate() encounter a failure when calling a
particular save_live_iterate function, report the error code returned
by the function.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The MIGRATION_STATUS_ACTIVE indicates that migration is running.
Remove it to be handled by the default operation,
It should be part of the unknown ending states.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
COLO dose not support postcopy migration and remove the Fixme.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the migration_completion() no other status is expected, for
example MIGRATION_STATUS_CANCELLING, MIGRATION_STATUS_CANCELLED, etc.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename num_normal_pages to total_normal_pages (peter)
We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.
So we receive an array of pages page->offset[N]
And we will end with:
p->normal[N - zero_pages]
p->zero[zero_pages].
In this patch, we just copy all the pages in offset to normal.
for (i = 0; i < pages->num; i++) {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
Later in the series this becomes:
for (i = 0; i < pages->num; i++) {
if (buffer_is_zero(page->offset[i])) {
p->zerol[p->zero_num] = pages->offset[i];
p->zero_num++:
} else {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
}
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)
Until now, we wrote the packet header with write(), and the rest of the
pages with writev(). Just increase the size of the iovec and do a
single writev().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It happens that there are functions to calculate the worst possible
compression size for a packet. Use them.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We always need to call it when we find a zero page, so put it in a
single place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Remove the mask in the call to ram_release_pages(). Nothing else does
it, and if the offset has that bits set, we have a lot of trouble.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove the pages argument. And s/pages/page/
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
- Use 1LL instead of casts (philmd)
- Change the whole 1ULL for TARGET_PAGE_SIZE
We only need last_stage in two places and we are passing it all
around. Just add a field to RAMState that passes it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Repeat subject (philmd suggestion)
So printing it as %d is wrong. Notice that for the channel id, that
is an uint8_t, but I changed it anyways for consistency.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-net-failover test tries several device combinations that produces
some expected warnings.
These warning can be confusing, so we disable them during the qtest
sequence.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211220145314.390697-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
[thuth: Fix memory leak by using error_free()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no need to put some trace code in the critical section.
So, moving it behind qemu_mutex_unlock_iothread() can reduce the
lock time.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When doing live migration with multifd channels 8, 16 or larger number,
the guest hangs in the presence of the network errors such as missing TCP ACKs.
At sender's side:
The main thread is blocked on qemu_thread_join, migration_fd_cleanup
is called because one thread fails on qio_channel_write_all when
the network problem happens and other send threads are blocked on sendmsg.
They could not be terminated. So the main thread is blocked on qemu_thread_join
to wait for the threads terminated.
(gdb) bt
0 0x00007f30c8dcffc0 in __pthread_clockjoin_ex () at /lib64/libpthread.so.0
1 0x000055cbb716084b in qemu_thread_join (thread=0x55cbb881f418) at ../util/qemu-thread-posix.c:627
2 0x000055cbb6b54e40 in multifd_save_cleanup () at ../migration/multifd.c:542
3 0x000055cbb6b4de06 in migrate_fd_cleanup (s=0x55cbb8024000) at ../migration/migration.c:1808
4 0x000055cbb6b4dfb4 in migrate_fd_cleanup_bh (opaque=0x55cbb8024000) at ../migration/migration.c:1850
5 0x000055cbb7173ac1 in aio_bh_call (bh=0x55cbb7eb98e0) at ../util/async.c:141
6 0x000055cbb7173bcb in aio_bh_poll (ctx=0x55cbb7ebba80) at ../util/async.c:169
7 0x000055cbb715ba4b in aio_dispatch (ctx=0x55cbb7ebba80) at ../util/aio-posix.c:381
8 0x000055cbb7173ffe in aio_ctx_dispatch (source=0x55cbb7ebba80, callback=0x0, user_data=0x0) at ../util/async.c:311
9 0x00007f30c9c8cdf4 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
10 0x000055cbb71851a2 in glib_pollfds_poll () at ../util/main-loop.c:232
11 0x000055cbb718521c in os_host_main_loop_wait (timeout=42251070366) at ../util/main-loop.c:255
12 0x000055cbb7185321 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
13 0x000055cbb6e6ba27 in qemu_main_loop () at ../softmmu/runstate.c:726
14 0x000055cbb6ad6fd7 in main (argc=68, argv=0x7ffc0c578888, envp=0x7ffc0c578ab0) at ../softmmu/main.c:50
To make sure that the send threads could be terminated, IO channels should be
shut down to avoid waiting IO.
Signed-off-by: Li Zhang <lizhang@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We were using the iov directly, but we will need this info on the
following patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will need to split it later in zero_num (number of zero pages) and
normal_num (number of normal pages). This name is better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are dividing by page_size to multiply again in the only use.
Once there, improve the comments.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It just calls buffer_is_zero(). Just change the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When the PVM guest poweroff, the COLO thread may wait a semaphore
in colo_process_checkpoint().So, we should wake up the COLO thread
before migration shutdown.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Previous operation(like vm_start and replication_start_all) will consume
extra time before update the timer, so reduce time in this patch.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The code to acquire bitmap_mutex is added in the commit of
"63268c4970a5f126cc9af75f3ccb8057abef5ec0". There is no
need to acquire bitmap_mutex in colo_flush_ram_cache(). This
is because the colo_flush_ram_cache only be called on the COLO
secondary VM, which is the destination side.
On the COLO secondary VM, only the COLO thread will touch
the bitmap of ram cache.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
if we don't reset the auto-converge counter,
it will continue to run with COLO running,
and eventually the system will hang due to the
CPU throttle reaching DEFAULT_MIGRATE_MAX_CPU_THROTTLE.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When flushing memory from ram cache to ram during every checkpoint
on secondary VM, we can copy continuous chunks of memory instead of
4096 bytes per time to reduce the time of VM stop during checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If postcopy has finished, it frees the array.
But vhost-user unregister it at cleanup time.
fixes: c4f7538
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
One might set dump-guest-core=off to make coredumps smaller and
still allow to debug many qemu bugs. Extend this option to the colo
cache.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we first stated the COLO, the last-mode is as follows:
{ "execute": "query-colo-status" }
{"return": {"last-mode": "primary", "mode": "primary", "reason": "none"}}
The last-mode is unreasonable. After the patch, will be changed to the
following:
{ "execute": "query-colo-status" }
{"return": {"last-mode": "none", "mode": "primary", "reason": "none"}}
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After the live migration, the related fd will be cleanup in
migration_incoming_state_destroy(). So, the qemu_close()
in colo_process_incoming_thread is not necessary.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The GDB statck is as follows:
Program terminated with signal SIGSEGV, Segmentation fault.
0 object_class_dynamic_cast (class=0x55c8f5d2bf50, typename=0x55c8f2f7379e "qio-channel") at qom/object.c:832
if (type->class->interfaces &&
[Current thread is 1 (Thread 0x7f756e97eb00 (LWP 1811577))]
(gdb) bt
0 object_class_dynamic_cast (class=0x55c8f5d2bf50, typename=0x55c8f2f7379e "qio-channel") at qom/object.c:832
1 0x000055c8f2c3dd14 in object_dynamic_cast (obj=0x55c8f543ac00, typename=0x55c8f2f7379e "qio-channel") at qom/object.c:763
2 0x000055c8f2c3ddce in object_dynamic_cast_assert (obj=0x55c8f543ac00, typename=0x55c8f2f7379e "qio-channel",
file=0x55c8f2f73780 "migration/qemu-file-channel.c", line=117, func=0x55c8f2f73800 <__func__.18724> "channel_shutdown") at qom/object.c:786
3 0x000055c8f2bbc6ac in channel_shutdown (opaque=0x55c8f543ac00, rd=true, wr=true, errp=0x0) at migration/qemu-file-channel.c:117
4 0x000055c8f2bba56e in qemu_file_shutdown (f=0x7f7558070f50) at migration/qemu-file.c:67
5 0x000055c8f2ba5373 in migrate_fd_cancel (s=0x55c8f4ccf3f0) at migration/migration.c:1699
6 0x000055c8f2ba1992 in migration_shutdown () at migration/migration.c:187
7 0x000055c8f29a5b77 in main (argc=69, argv=0x7fff3e9e8c08, envp=0x7fff3e9e8e38) at vl.c:4512
The root cause is that we still want to shutdown the from_dst_file in
migrate_fd_cancel() after qemu_close in colo_process_checkpoint().
So, we should set the s->rp_state.from_dst_file = NULL after
qemu_close().
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch fixed as follows:
Thread 1 (Thread 0x7f34ee738d80 (LWP 11212)):
#0 __pthread_clockjoin_ex (threadid=139847152957184, thread_return=0x7f30b1febf30, clockid=<optimized out>, abstime=<optimized out>, block=<optimized out>) at pthread_join_common.c:145
#1 0x0000563401998e36 in qemu_thread_join (thread=0x563402d66610) at util/qemu-thread-posix.c:587
#2 0x00005634017a79fa in process_incoming_migration_co (opaque=0x0) at migration/migration.c:502
#3 0x00005634019b59c9 in coroutine_trampoline (i0=63395504, i1=22068) at util/coroutine-ucontext.c:115
#4 0x00007f34ef860660 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91 from /lib/x86_64-linux-gnu/libc.so.6
#5 0x00007f30b21ee730 in ?? ()
#6 0x0000000000000000 in ?? ()
Thread 13 (Thread 0x7f30b3dff700 (LWP 11747)):
#0 __lll_lock_wait (futex=futex@entry=0x56340218ffa0 <qemu_global_mutex>, private=0) at lowlevellock.c:52
#1 0x00007f34efa000a3 in _GI__pthread_mutex_lock (mutex=0x56340218ffa0 <qemu_global_mutex>) at ../nptl/pthread_mutex_lock.c:80
#2 0x0000563401997f99 in qemu_mutex_lock_impl (mutex=0x56340218ffa0 <qemu_global_mutex>, file=0x563401b7a80e "migration/colo.c", line=806) at util/qemu-thread-posix.c:78
#3 0x0000563401407144 in qemu_mutex_lock_iothread_impl (file=0x563401b7a80e "migration/colo.c", line=806) at /home/workspace/colo-qemu/cpus.c:1899
#4 0x00005634017ba8e8 in colo_process_incoming_thread (opaque=0x563402d664c0) at migration/colo.c:806
#5 0x0000563401998b72 in qemu_thread_start (args=0x5634039f8370) at util/qemu-thread-posix.c:519
#6 0x00007f34ef9fd609 in start_thread (arg=<optimized out>) at pthread_create.c:477
#7 0x00007f34ef924293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
The QEMU main thread is holding the lock:
(gdb) p qemu_global_mutex
$1 = {lock = {_data = {lock = 2, __count = 0, __owner = 11212, __nusers = 9, __kind = 0, __spins = 0, __elision = 0, __list = {_prev = 0x0, __next = 0x0}},
__size = "\002\000\000\000\000\000\000\000\314+\000\000\t", '\000' <repeats 26 times>, __align = 2}, file = 0x563401c07e4b "util/main-loop.c", line = 240,
initialized = true}
>From the call trace, we can see it is a deadlock bug. and the QEMU main thread holds the global mutex to wait until the COLO thread ends. and the colo thread
wants to acquire the global mutex, which will cause a deadlock. So, we should release the qemu_global_mutex before waiting colo thread ends.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch fixes the following:
qemu-system-x86_64: invalid runstate transition: 'shutdown' -> 'running'
Aborted (core dumped)
The gdb bt as following:
0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
1 0x00007faa3d613859 in __GI_abort () at abort.c:79
2 0x000055c5a21268fd in runstate_set (new_state=RUN_STATE_RUNNING) at vl.c:723
3 0x000055c5a1f8cae4 in vm_prepare_start () at /home/workspace/colo-qemu/cpus.c:2206
4 0x000055c5a1f8cb1b in vm_start () at /home/workspace/colo-qemu/cpus.c:2213
5 0x000055c5a2332bba in migration_iteration_finish (s=0x55c5a4658810) at migration/migration.c:3376
6 0x000055c5a2332f3b in migration_thread (opaque=0x55c5a4658810) at migration/migration.c:3527
7 0x000055c5a251d68a in qemu_thread_start (args=0x55c5a5491a70) at util/qemu-thread-posix.c:519
8 0x00007faa3d7e9609 in start_thread (arg=<optimized out>) at pthread_create.c:477
9 0x00007faa3d710293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the compression migration fails or is canceled, the query for the value of
compression_counters during the next compression migration is wrong.
Signed-off-by: yuxiating <yuxiating@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This avoids to call migrate_get_current() in the caller function
whereas migration_cancel() already needs the pointer to the current
migration state.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce dirty-bitmap mode as the third method of calc-dirty-rate.
implement dirty-bitmap dirtyrate calculation, which can be used
to measuring dirtyrate in the absence of dirty-ring.
introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to
indicate dirty bitmap method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce global var total_dirty_pages to stat dirty pages
along with memory_global_dirty_log_sync.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We already don't ever migrate memory that corresponds to discarded ranges
as managed by a RamDiscardManager responsible for the mapped memory region
of the RAMBlock.
virtio-mem uses this mechanism to logically unplug parts of a RAMBlock.
Right now, we still populate zeropages for the whole usable part of the
RAMBlock, which is undesired because:
1. Even populating the shared zeropage will result in memory getting
consumed for page tables.
2. Memory backends without a shared zeropage (like hugetlbfs and shmem)
will populate an actual, fresh page, resulting in an unintended
memory consumption.
Discarded ("logically unplugged") parts have to remain discarded. As
these pages are never part of the migration stream, there is no need to
track modifications via userfaultfd WP reliably for these parts.
Further, any writes to these ranges by the VM are invalid and the
behavior is undefined.
Note that Linux only supports userfaultfd WP on private anonymous memory
for now, which usually results in the shared zeropage getting populated.
The issue will become more relevant once userfaultfd WP supports shmem
and hugetlb.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's factor out prefaulting/populating to make further changes easier to
review and add a comment what we are actually expecting to happen. While at
it, use the actual page size of the ramblock, which defaults to
qemu_real_host_page_size for anonymous memory. Further, rename
ram_block_populate_pages() to ram_block_populate_read() as well, to make
it clearer what we are doing.
In the future, we might want to use MADV_POPULATE_READ to speed up
population.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's use QEMU_ALIGN_DOWN() and friends to make the code a bit easier to
read.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, when someone (i.e., the VM) accesses discarded parts inside a
RAMBlock with a RamDiscardManager managing the corresponding mapped memory
region, postcopy will request migration of the corresponding page from the
source. The source, however, will never answer, because it refuses to
migrate such pages with undefined content ("logically unplugged"): the
pages are never dirty, and get_queued_page() will consequently skip
processing these postcopy requests.
Especially reading discarded ("logically unplugged") ranges is supposed to
work in some setups (for example with current virtio-mem), although it
barely ever happens: still, not placing a page would currently stall the
VM, as it cannot make forward progress.
Let's check the state via the RamDiscardManager (the state e.g.,
of virtio-mem is migrated during precopy) and avoid sending a request
that will never get answered. Place a fresh zero page instead to keep
the VM working. This is the same behavior that would happen
automatically without userfaultfd being active, when accessing virtual
memory regions without populated pages -- "populate on demand".
For now, there are valid cases (as documented in the virtio-mem spec) where
a VM might read discarded memory; in the future, we will disallow that.
Then, we might want to handle that case differently, e.g., warning the
user that the VM seems to be mis-behaving.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't want to migrate memory that corresponds to discarded ranges as
managed by a RamDiscardManager responsible for the mapped memory region of
the RAMBlock. The content of these pages is essentially stale and
without any guarantees for the VM ("logically unplugged").
Depending on the underlying memory type, even reading memory might populate
memory on the source, resulting in an undesired memory consumption. Of
course, on the destination, even writing a zeropage consumes memory,
which we also want to avoid (similar to free page hinting).
Currently, virtio-mem tries achieving that goal (not migrating "unplugged"
memory that was discarded) by going via qemu_guest_free_page_hint() - but
it's hackish and incomplete.
For example, background snapshots still end up reading all memory, as
they don't do bitmap syncs. Postcopy recovery code will re-add
previously cleared bits to the dirty bitmap and migrate them.
Let's consult the RamDiscardManager after setting up our dirty bitmap
initially and when postcopy recovery code reinitializes it: clear
corresponding bits in the dirty bitmaps (e.g., of the RAMBlock and inside
KVM). It's important to fixup the dirty bitmap *after* our initial bitmap
sync, such that the corresponding dirty bits in KVM are actually cleared.
As colo is incompatible with discarding of RAM and inhibits it, we don't
have to bother.
Note: if a misbehaving guest would use discarded ranges after migration
started we would still migrate that memory: however, then we already
populated that memory on the migration source.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
An internal version that removes -only-migratable implications. It can be used
for temporary migration blockers like dump-guest-memory.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
save_snapshot() checks migration blocker, which looks sane. At the meantime we
should also teach the blocker add helper to fail if during a snapshot, just
like for migrations.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
use dirty ring feature to implement dirtyrate calculation.
introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.
introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since main thread may "query dirty rate" at any time, it's better
to move init step into main thead so that synchronization overhead
between "main" and "get_dirtyrate" can be reduced.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <109f8077518ed2f13068e3bfb10e625e964780f1.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
registering get_dirtyrate thread in advance so that both
page-sampling and dirty-ring mode can be covered.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <d7727581a8e86d4a42fc3eacf7f310419b9ebf7e.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce "DirtyRateMeasureMode" to specify what method should be
used to calculate dirty rate, introduce "DirtyRateVcpu" to store
dirty rate for each vcpu.
use union to store stat data of specific mode
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <661c98c40f40e163aa58334337af8f3ddf41316a.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since dirty ring has been introduced, there are two methods
to track dirty pages of vm. it seems that "logging" has
a hint on the method, so rename the global_dirty_log to
global_dirty_tracking would make description more accurate.
dirty rate measurement may start or stop dirty tracking during
calculation. this conflict with migration because stop dirty
tracking make migration leave dirty pages out then that'll be
a problem.
make global_dirty_tracking a bitmask can let both migration and
dirty rate measurement work fine. introduce GLOBAL_DIRTY_MIGRATION
and GLOBAL_DIRTY_DIRTY_RATE to distinguish what current dirty
tracking aims for, migration or dirty rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <9c9388657cfa0301bd2c1cfa36e7cf6da4aeca19.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
destination:
../qemu/build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server-migration.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5902,disable-ticketing -incoming rdma:192.168.22.23:8888
qemu-system-x86_64: -spice streaming-video=filter,port=5902,disable-ticketing: warning: short-form boolean option 'disable-ticketing' deprecated
Please use disable-ticketing=on instead
QEMU 6.0.50 monitor - type 'help' for more information
(qemu) trace-event qemu_rdma_block_for_wrid_miss on
(qemu) dest_init RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
qemu_rdma_block_for_wrid_miss A Wanted wrid CONTROL SEND (2000) but got CONTROL RECV (4000)
source:
../qemu/build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5901,disable-ticketing -S
qemu-system-x86_64: -spice streaming-video=filter,port=5901,disable-ticketing: warning: short-form boolean option 'disable-ticketing' deprecated
Please use disable-ticketing=on instead
QEMU 6.0.50 monitor - type 'help' for more information
(qemu)
(qemu) trace-event qemu_rdma_block_for_wrid_miss on
(qemu) migrate -d rdma:192.168.22.23:8888
source_resolve_host RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
(qemu) qemu_rdma_block_for_wrid_miss A Wanted wrid WRITE RDMA (1) but got CONTROL RECV (4000)
NOTE: we use soft RoCE as the rdma device.
[root@iaas-rpma images]# rdma link show rxe_eth0/1
link rxe_eth0/1 state ACTIVE physical_state LINK_UP netdev eth0
This migration could not be completed when out of order(OOO) CQ event occurs.
The send queue and receive queue shared a same completion queue, and
qemu_rdma_block_for_wrid() will drop the CQs it's not interested in. But
the dropped CQs by qemu_rdma_block_for_wrid() could be later CQs it wants.
So in this case, qemu_rdma_block_for_wrid() will block forever.
OOO cases will occur in both source side and destination side. And a
forever blocking happens on only SEND and RECV are out of order. OOO between
'WRITE RDMA' and 'RECV' doesn't matter.
below the OOO sequence:
source destination
rdma_write_one() qemu_rdma_registration_handle()
1. S1: post_recv X D1: post_recv Y
2. wait for recv CQ event X
3. D2: post_send X ---------------+
4. wait for send CQ send event X (D2) |
5. recv CQ event X reaches (D2) |
6. +-S2: post_send Y |
7. | wait for send CQ event Y |
8. | recv CQ event Y (S2) (drop it) |
9. +-send CQ event Y reaches (S2) |
10. send CQ event X reaches (D2) -----+
11. wait recv CQ event Y (dropped by (8))
Although a hardware IB works fine in my a hundred of runs, the IB specification
doesn't guaratee the CQ order in such case.
Here we introduce a independent send completion queue to distinguish
ibv_post_send completion queue from the original mixed completion queue.
It helps us to poll the specific CQE we are really interested in.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The responder mr registering with ODP will sent RNR NAK back to
the requester in the face of the page fault.
---------
ibv_poll_cq wc.status=13 RNR retry counter exceeded!
ibv_poll_cq wrid=WRITE RDMA!
---------
ibv_advise_mr(3) helps to make pages present before the actual IO is
conducted so that the responder does page fault as little as possible.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Previously, for the fsdax mem-backend-file, it will register failed with
Operation not supported. In this case, we can try to register it with
On-Demand Paging[1] like what rpma_mr_reg() does on rpma[2].
[1]: https://community.mellanox.com/s/article/understanding-on-demand-paging--odp-x
[2]: http://pmem.io/rpma/manpages/v0.9.0/rpma_mr_reg.3
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To: <quintela@redhat.com>, <dgilbert@redhat.com>, <qemu-devel@nongnu.org>
CC: Li Zhijian <lizhijian@cn.fujitsu.com>
Date: Sat, 31 Jul 2021 22:05:52 +0800 (5 weeks, 4 days, 17 hours ago)
And change the default to true so that in '-incoming defer' case, user is able
to change multifd capability.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To: <quintela@redhat.com>, <dgilbert@redhat.com>, <qemu-devel@nongnu.org>
CC: Li Zhijian <lizhijian@cn.fujitsu.com>
Date: Sat, 31 Jul 2021 22:05:51 +0800 (5 weeks, 4 days, 17 hours ago)
multifd with unsupported protocol will cause a segment fault.
(gdb) bt
#0 0x0000563b4a93faf8 in socket_connect (addr=0x0, errp=0x7f7f02675410) at ../util/qemu-sockets.c:1190
#1 0x0000563b4a797a03 in qio_channel_socket_connect_sync
(ioc=0x563b4d16e8c0, addr=0x0, errp=0x7f7f02675410) at
../io/channel-socket.c:145
#2 0x0000563b4a797abf in qio_channel_socket_connect_worker (task=0x563b4cd86c30, opaque=0x0) at ../io/channel-socket.c:168
#3 0x0000563b4a792631 in qio_task_thread_worker (opaque=0x563b4cd86c30) at ../io/task.c:124
#4 0x0000563b4a91da69 in qemu_thread_start (args=0x563b4c44bb80) at ../util/qemu-thread-posix.c:541
#5 0x00007f7fe9b5b3f9 in ?? ()
#6 0x0000000000000000 in ?? ()
It's enough to check migrate_multifd_is_allowed() in multifd cleanup() and
multifd setup() though there are so many other places using migrate_use_multifd().
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The parameter is unused, let's drop it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To: qemu-devel <qemu-devel@nongnu.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>, Juan Quintela
<quintela@redhat.com>, Peter Xu <peterx@redhat.com>, Leonardo Bras Soares
Passos <lsoaresp@redhat.com>
Date: Wed, 4 Aug 2021 21:26:32 +0200 (5 weeks, 11 hours, 52 minutes ago)
[[PGP Signed Part:No public key for 35AB0B289C5DB258 created at 2021-08-04T21:26:32+0200 using RSA]]
Unconditionally unregister yank function in multifd_load_cleanup().
If it is not unregistered here, it will leak and cause a crash
in yank_unregister_instance(). Now if the ioc is still in use
afterwards, it will only lead to qemu not being able to recover
from a hang related to that ioc.
After checking the code, i am pretty sure that ref is always 1
when arriving here. So all this currently does is remove the
unneeded check.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To: qemu-devel <qemu-devel@nongnu.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>, Juan Quintela
<quintela@redhat.com>, Peter Xu <peterx@redhat.com>, Leonardo Bras Soares
Passos <lsoaresp@redhat.com>
Date: Wed, 1 Sep 2021 17:58:57 +0200 (1 week, 15 hours, 17 minutes ago)
[[PGP Signed Part:No public key for 35AB0B289C5DB258 created at 2021-09-01T17:58:57+0200 using RSA]]
When introducing yank functionality in the migration code I forgot
to cover the multifd send side.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_savevm_state_complete_postcopy assumes the iothread lock (BQL)
to be held, but instead it isn't.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20211005080751.3797161-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
init_dirty_bitmap_migration assumes the iothread lock (BQL)
to be held, but instead it isn't.
Instead of adding the lock to qemu_savevm_state_setup(),
follow the same pattern as the other ->save_setup callbacks
and lock+unlock inside dirty_bitmap_save_setup().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211005080751.3797161-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error
parameter" changed migration_incoming_setup() to take an Error **
argument, and adjusted the callers accordingly. It neglected to
change adjust multifd_load_setup(): it still exit()s on error. Clean
that up.
The error now gets propagated up two call chains: via
migration_fd_process_incoming() to rdma_accept_incoming_migration(),
and via migration_ioc_process_incoming() to
migration_channel_process_incoming(). Both chain ends report the
error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.
This is consistent with how we handle other errors here, e.g. from
multifd_recv_new_channel() via migration_ioc_process_incoming() to
migration_channel_process_incoming(). Whether it's consistently right
or consistently wrong I can't tell.
Also clean up the return value from the unusual 0 on success, 1 on
error to the more common true on success, false on error.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
We did this with scripts/coccinelle/use-error_fatal.cocci before, in
commit 50beeb6809 and 007b06578a. This commit cleans up rarer
variations that don't seem worth matching with Coccinelle.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When skipping free pages to send, their corresponding dirty bits in the
memory region dirty bitmap need to be cleared. Otherwise the skipped
pages will be sent in the next round after the migration thread syncs
dirty bits from the memory region dirty bitmap.
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20210722083055.23352-1-wei.w.wang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's efficient, but hackish to call yank unregister calls in channel_close(),
especially it'll be hard to debug when qemu crashed with some yank function
leaked.
Remove that hack, but instead explicitly unregister yank functions at the
places where needed, they are:
(on src)
- migrate_fd_cleanup
- postcopy_pause
(on dst)
- migration_incoming_state_destroy
- postcopy_pause_incoming
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-6-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migration uses QIOChannel typed qemufiles. In follow up patches, we'll need
the capability to identify this fact, so that we can get the backing QIOChannel
from a QEMUFile.
We can also define types for QEMUFile but so far since we only need to be able
to identify QIOChannel, introduce a boolean which is simpler.
Introduce another helper qemu_file_get_ioc() to return the ioc backend of a
qemufile if has_ioc is set.
No functional change.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-5-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There're plenty of places in migration/* that checks against either socket or
tls typed ioc for yank operations. Provide two helpers to hide all these
information.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-4-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Accessing from_dst_file is potentially racy in current code base like below:
if (s->from_dst_file)
do_something(s->from_dst_file);
Because from_dst_file can be reset right after the check in another
thread (rp_thread). One example is migrate_fd_cancel().
Use the same qemu_file_lock to protect it too, just like to_dst_file.
When it's safe to access without lock, comment it.
There's one special reference in migration_thread() that can be replaced by
the newly introduced rp_thread_created flag.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <20210722175841.938739-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with Peter's fixup
It's possible that the migration thread skip the join() of the rp_thread in
below race and crash on src right at finishing migration:
migration_thread rp_thread
---------------- ---------
migration_completion()
(before rp_thread quits)
from_dst_file=NULL
[thread got scheduled out]
s->rp_state.from_dst_file==NULL
(skip join() of rp_thread)
migrate_fd_cleanup()
qemu_fclose(s->to_dst_file)
yank_unregister_instance()
assert(yank_find_entry()) <------- crash
It could mostly happen with postcopy, but that shouldn't be required, e.g., I
think it could also trigger with MIGRATION_CAPABILITY_RETURN_PATH set.
It's suspected that above race could be the root cause of a recent (but rare)
migration-test break reported by either Dave or PMM:
https://lore.kernel.org/qemu-devel/YPamXAHwan%2FPPXLf@work-vm/
The issue is: from_dst_file is reset in the rp_thread, so if the thread reset
it to NULL fast enough then the migration thread will assume there's no
rp_thread at all.
This could potentially cause more severe issue (e.g. crash) after the yank code.
Fix it by using a boolean to keep "whether we've created rp_thread".
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-2-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Taking the mutex every time for each dirty bit to clear is too slow, especially
we'll take/release even if the dirty bit is cleared. So far it's only used to
sync with special cases with qemu_guest_free_page_hint() against migration
thread, nothing really that serious yet. Let's move the lock to be upper.
There're two callers of migration_bitmap_clear_dirty().
For migration, move it into ram_save_iterate(). With the help of MAX_WAIT
logic, we'll only run ram_save_iterate() for no more than 50ms-ish time, so
taking the lock once there at the entry. It also means any call sites to
qemu_guest_free_page_hint() can be delayed; but it should be very rare, only
during migration, and I don't see a problem with it.
For COLO, move it up to colo_flush_ram_cache(). I think COLO forgot to take
that lock even when calling ramblock_sync_dirty_bitmap(), where another example
is migration_bitmap_sync() who took it right. So let the mutex cover both the
ramblock_sync_dirty_bitmap() and migration_bitmap_clear_dirty() calls.
It's even possible to drop the lock so we use atomic operations upon rb->bmap
and the variable migration_dirty_pages. I didn't do it just to still be safe,
also not predictable whether the frequent atomic ops could bring overhead too
e.g. on huge vms when it happens very often. When that really comes, we can
keep a local counter and periodically call atomic ops. Keep it simple for now.
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Leonardo Bras Soares Passos <lsoaresp@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210630200805.280905-1-peterx@redhat.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For each "migrate" command, remember to clear the s->error before going on.
For one reason, when there's a new error it'll be still remembered; see
migrate_set_error() who only sets the error if error==NULL. Meanwhile if a
failed migration completes (e.g., postcopy recovered and finished), we
shouldn't dump an error when calling migrate_fd_cleanup() at last.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210708190653.252961-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Below process could crash qemu with postcopy recovery:
1. (hmp) migrate -d ..
2. (hmp) migrate_start_postcopy
3. [network down, postcopy paused]
4. (hmp) migrate -r $WRONG_PORT
when try the recover on an invalid $WRONG_PORT, cleanup_bh will be cleared
5. (hmp) migrate -r $RIGHT_PORT
[qemu crash on assert(cleanup_bh)]
The thing is we shouldn't cleanup if it's postcopy resume; the error is set
mostly because the channel is wrong, so we return directly waiting for the user
to retry.
migrate_fd_cleanup() should only be called when migration is cancelled or
completed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210708190653.252961-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When postcopy pause triggered, we rely on the migration thread to cleanup the
to_dst_file handle, and the return path thread to cleanup the from_dst_file
handle (which is stored in the local variable "rp").
Within the process, from_dst_file cleanup (qemu_fclose) is postponed until it's
setup again due to a postcopy recovery.
It used to work before yank was born; after yank is introduced we rely on the
refcount of IOC to correctly unregister yank function in channel_close(). If
without the early and on-time release of from_dst_file handle the yank function
will be leftover during paused postcopy.
Without this patch, below steps (quoted from Xiaohui) could trigger qemu src
crash:
1.Boot vm on src host
2.Boot vm on dst host
3.Enable postcopy on src&dst host
4.Load stressapptest in vm and set postcopy speed to 50M
5.Start migration from src to dst host, change into postcopy mode when migration is active.
6.When postcopy is active, down the network card(do migration via this network) on dst host.
7.Wait untill postcopy is paused on src&dst host.
8.Before up network card, recover migration on dst host, will get error like following.
9.Ignore the error of step 8, go on recovering migration on src host:
After step 9, qemu on src host will core dump after some seconds:
qemu-kvm: ../util/yank.c:107: yank_unregister_instance: Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
1.sh: line 38: 44662 Aborted (core dumped)
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210708190653.252961-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When the migration fails or is canceled we wait the end of the unplug
operation to be able to plug it back. But if the unplug operation
is never finished we stop to wait and QEMU emits a warning to inform
the user.
Based-on: 20210629155007.629086-1-lvivier@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210701131458.112036-1-lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
backtrace:
'0x00007ffff5f44ec2 in __ibv_dereg_mr_1_1 (mr=0x7fff1007d390) at /home/lizhijian/rdma-core/libibverbs/verbs.c:478
478 void *addr = mr->addr;
(gdb) bt
#0 0x00007ffff5f44ec2 in __ibv_dereg_mr_1_1 (mr=0x7fff1007d390) at /home/lizhijian/rdma-core/libibverbs/verbs.c:478
#1 0x0000555555891fcc in rdma_delete_block (block=<optimized out>, rdma=0x7fff38176010) at ../migration/rdma.c:691
#2 qemu_rdma_cleanup (rdma=0x7fff38176010) at ../migration/rdma.c:2365
#3 0x00005555558925b0 in qio_channel_rdma_close_rcu (rcu=0x555556b8b6c0) at ../migration/rdma.c:3073
#4 0x0000555555d652a3 in call_rcu_thread (opaque=opaque@entry=0x0) at ../util/rcu.c:281
#5 0x0000555555d5edf9 in qemu_thread_start (args=0x7fffe88bb4d0) at ../util/qemu-thread-posix.c:541
#6 0x00007ffff54c73f9 in start_thread () at /lib64/libpthread.so.0
#7 0x00007ffff53f3b03 in clone () at /lib64/libc.so.6 '
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210708144521.1959614-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes commit 3d0684b2ad ("ram: Update
all functions comments")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210708162159.18045-1-olaf@aepfle.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prior calls are successful, in this case a errno doesn't
indicate a real error which would just make us confused.
before:
(qemu) migrate -d rdma:192.168.22.23:8888
source_resolve_host RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
rdma_get_cm_event != EVENT_ESTABLISHED after rdma_connect: No space left on device
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210628071959.23455-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the user cancels the migration in the unplug-wait state,
QEMU will try to plug back the card and this fails because the card
is partially unplugged.
To avoid the problem, continue to wait the card unplug, but to
allow the migration to be canceled if the card never finishes to unplug
use a timeout.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1976852
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210629155007.629086-3-lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The loop is used in migration_thread() and bg_migration_thread(),
so we can move it to its own function and call it from these both places.
Moreover, in migration_thread() we have a wrong state transition from
SETUP to ACTIVE while state could be WAIT_UNPLUG. This is correctly
managed in bg_migration_thread() so use this code instead.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210629155007.629086-2-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's possible qemu_start_incoming_migration() failed at any point, when it
happens we should reset postcopy_recover_triggered to false so that the user
can still retry with a saner incoming port.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210629181356.217312-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Starting from commit b5eea99ec2, qmp_migrate_recover() calls unregister
before calling qemu_start_incoming_migration(). I believe it wanted to mitigate
the next call to yank_register_instance(), but I think that's wrong.
Firstly, if during recover, we should keep the yank instance there, not
"quickly removing and adding it back".
Meanwhile, calling qmp_migrate_recover() twice with b5eea99ec2 will directly
crash the dest qemu (right now it can't; but it'll start to work right after
the next patch) because the 1st call of qmp_migrate_recover() will unregister
permanently when the channel failed to establish, then the 2nd call of
qmp_migrate_recover() crashes at yank_unregister_instance().
This patch fixes it by moving yank ops out of qemu_start_incoming_migration()
into qmp_migrate_incoming. For qmp_migrate_recover(), drop the unregister of
yank instance too since we keep it there during the recovery phase.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210629181356.217312-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When testing migration, a Segmentation fault qemu core is generated.
0 error_free (err=0x1)
1 0x00007f8b862df647 in qemu_fclose (f=f@entry=0x55e06c247640)
2 0x00007f8b8516d59a in migrate_fd_cleanup (s=s@entry=0x55e06c0e1ef0)
3 0x00007f8b8516d66c in migrate_fd_cleanup_bh (opaque=0x55e06c0e1ef0)
4 0x00007f8b8626a47f in aio_bh_poll (ctx=ctx@entry=0x55e06b5a16d0)
5 0x00007f8b8626e71f in aio_dispatch (ctx=0x55e06b5a16d0)
6 0x00007f8b8626a33d in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>)
7 0x00007f8b866bdba4 in g_main_context_dispatch ()
8 0x00007f8b8626cde9 in glib_pollfds_poll ()
9 0x00007f8b8626ce62 in os_host_main_loop_wait (timeout=<optimized out>)
10 0x00007f8b8626cffd in main_loop_wait (nonblocking=nonblocking@entry=0)
11 0x00007f8b862ef01f in main_loop ()
Using gdb print the struct QEMUFile f = {
...,
iovcnt = 65, last_error = 21984,
last_error_obj = 0x1, shutdown = true
}
Well iovcnt is overflow, because the max size of MAX_IOV_SIZE is 64.
struct QEMUFile {
...;
struct iovec iov[MAX_IOV_SIZE];
unsigned int iovcnt;
int last_error;
Error *last_error_obj;
bool shutdown;
};
iovcnt and last_error is overwrited by add_to_iovec().
Right now, add_to_iovec() increase iovcnt before check the limit.
And it seems that add_to_iovec() assumes that iovcnt will set to zero
in qemu_fflush(). But qemu_fflush() will directly return when f->shutdown
is true.
The situation may occur when libvirtd restart during migration, after
f->shutdown is set, before calling qemu_file_set_error() in
qemu_file_shutdown().
So the safiest way is checking the iovcnt before increasing it.
Signed-off-by: Feng Lin <linfeng23@huawei.com>
Message-Id: <20210625062138.1899-1-linfeng23@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix typo in 'writeable' which is actually misnamed 'writable'
Avoid accessing QCryptoTLSCreds internals by using
the qcrypto_tls_creds_check_endpoint() helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The
new flag has the following semantics:
"
RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge
pages if applicable) is skipped: will bail out if not supported. When not
set, the OS will do the reservation, if supported for the memory type.
"
Allow passing it into:
- memory_region_init_ram_nomigrate()
- memory_region_init_resizeable_ram()
- memory_region_init_ram_from_file()
... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag.
Bail out if the flag is not supported, which is the case right now for
both, POSIX and win32. We will add Linux support next and allow specifying
RAM_NORESERVE via memory backends.
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-9-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a critical failure scenario for migration that is hard to
diagnose from existing probes. Most likely it is caused by an error
from bdrv_flush(), but we're not logging the errno anywhere, hence
this new probe.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can detect disk migration in migrate_prepare, if disk migration
is enabled in COLO mode, we can directly report an error.and there
is no need to disable block migration at every checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
introduce optional sample-pages argument in calc-dirty-rate,
making sample page count per GB configurable so that more
accurate dirtyrate can be calculated.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <3103453a3b2796f929269c99a6ad81a9a7f1f405.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrapped a couple of long lines
Delay closing the listener until the cleanup hook at the end; mptcp
needs the listener to stay open while the other paths come in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a cleanup hook for incoming migration that gets called
at the end as a way for a transport to allow cleanup.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210602023506.3821293-1-lizhijian@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After yank feature was introduced in migration, whenever migration
is started using TLS, the following error happens in both source and
destination hosts:
(qemu) qemu-kvm: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
This happens because of a missing yank_unregister_function() when using
qio-channel-tls.
Fix this by also allowing TYPE_QIO_CHANNEL_TLS object type to perform
yank_unregister_function() in channel_close() and multifd_load_cleanup().
Also, inside migration_channel_connect() and
migration_channel_process_incoming() move yank_register_function() so
it only runs once on a TLS migration.
Fixes: b5eea99ec2 ("migration: Add yank feature", 2021-01-13)
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1964326
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Changes since v2:
- Dropped all references to ioc->master
- yank_register_function() and yank_unregister_function() now only run
once in a TLS migration.
Changes since v1:
- Cast p->c to QIOChannelTLS into multifd_load_cleanup()
Message-Id: <20210601054030.1153249-1-leobras.c@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes for a loadvm regression from Kevin,
some virtiofsd cleanups from Vivek and Mahmoud, and
some RDMA migration fixups from Li.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dIM2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210526a' into staging
Virtiofs, migration and hmp pull 2021-05-26
Fixes for a loadvm regression from Kevin,
some virtiofsd cleanups from Vivek and Mahmoud, and
some RDMA migration fixups from Li.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 26 May 2021 18:43:30 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210526a:
migration/rdma: source: poll cm_event from return path
migration/rdma: destination: create the return patch after the first accept
migration/rdma: Fix rdma_addrinfo res leaks
migration/rdma: cleanup rdma in rdma_start_incoming_migration error path
migration/rdma: Fix cm_event used before being initialized
tools/virtiofsd/fuse_opt.c: Replaced a malloc with GLib's g_try_malloc
tools/virtiofsd/buffer.c: replaced a calloc call with GLib's g_try_new0
virtiofsd: Set req->reply_sent right after sending reply
virtiofsd: Check EOF before short read
virtiofsd: Simplify skip byte logic
virtiofsd: get rid of in_sg_left variable
virtiofsd: Use iov_discard_front() to skip bytes
virtiofsd: Get rid of unreachable code in read
virtiofsd: Check for EINTR in preadv() and retry
hmp: Fix loadvm to resume the VM on success instead of failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
source side always blocks if postcopy is only enabled at source side.
users are not able to cancel this migration in this case.
Let source side have chance to cancel this migration
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210525080552.28259-4-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Typo fix
destination side:
$ build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server-migration.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5902,disable-ticketing -incoming rdma:192.168.1.10:8888
(qemu) migrate_set_capability postcopy-ram on
(qemu)
dest_init RDMA Device opened: kernel name rocep1s0f0 uverbs device name uverbs0, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs0, infiniband class device path /sys/class/infiniband/rocep1s0f0, transport: (2) Ethernet
Segmentation fault (core dumped)
(gdb) bt
#0 qemu_rdma_accept (rdma=0x0) at ../migration/rdma.c:3272
#1 rdma_accept_incoming_migration (opaque=0x0) at ../migration/rdma.c:3986
#2 0x0000563c9e51f02a in aio_dispatch_handler
(ctx=ctx@entry=0x563ca0606010, node=0x563ca12b2150) at ../util/aio-posix.c:329
#3 0x0000563c9e51f752 in aio_dispatch_handlers (ctx=0x563ca0606010) at ../util/aio-posix.c:372
#4 aio_dispatch (ctx=0x563ca0606010) at ../util/aio-posix.c:382
#5 0x0000563c9e4f4d9e in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:306
#6 0x00007fe96ef3fa9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#7 0x0000563c9e4ffeb8 in glib_pollfds_poll () at ../util/main-loop.c:231
#8 os_host_main_loop_wait (timeout=12188789) at ../util/main-loop.c:254
#9 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:530
#10 0x0000563c9e3c7211 in qemu_main_loop () at ../softmmu/runstate.c:725
#11 0x0000563c9dfd46fe in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:50
The rdma return path will not be created when qemu incoming is starting
since migrate_copy() is false at that moment, then a NULL return path
rdma was referenced if the user enabled postcopy later.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210525080552.28259-3-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
rdma_freeaddrinfo() is the reverse operation of rdma_getaddrinfo()
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210525080552.28259-2-lizhijian@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
the error path after calling qemu_rdma_dest_init() should do rdma cleanup
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210520081148.17001-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A segmentation fault was triggered when i try to abort a postcopy + rdma
migration.
since rdma_ack_cm_event releases a uninitialized cm_event in these case.
like below:
2496 ret = rdma_get_cm_event(rdma->channel, &cm_event);
2497 if (ret) {
2498 perror("rdma_get_cm_event after rdma_connect");
2499 ERROR(errp, "connecting to destination!");
2500 rdma_ack_cm_event(cm_event); <<<< cause segmentation fault
2501 goto err_rdma_source_connect;
2502 }
Refer to the rdma_get_cm_event() code, cm_event will be
updated/changed only if rdma_get_cm_event() returns 0. So it's okey to
remove the ack in error patch.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210519064740.10828-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The replication.h file is included from migration/colo.c and tests/unit/test-replication.c,
so it should be in include/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CONFIG_VFIO switch only works in target specific code. Since
migration/migration.c is common code, the #ifdef does not have
the intended behavior here. Move the related code to a separate
file now which gets compiled via specific_ss instead.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Message-Id: <20210414112004.943383-3-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We never read or write beyond the used_length of memory blocks when
migrating. Make this clearer by using offset_in_ramblock() consistently.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-11-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We actually want to print the used_length, against which we check.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-10-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works with the usable_length of a ram block and
does not expect this value to change at random points in time.
In the case of postcopy, relying on used_length is racy as soon as the
guest is running. Also, when used_length changes we might leave the
uffd handler registered for some memory regions, reject valid pages
when migrating and fail when sending the recv bitmap to the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Let's remember the original used_length in a separate variable and
use it in relevant postcopy code. Make sure to update it when we resize
during precopy, when synchronizing the RAM block sizes with the source.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-9-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add two new helper functions. This will come in come handy once we want to
handle ram block resizes while postcopy is active.
Note that ram_block_from_stream() will already print proper errors.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-8-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Added brackets in host_page_from_ram_block_offset
to cause uintptr_t to cast the sum, to fix armhf-cross build
In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when
synchronizing the RAM block state with the migration source), the resized
part would not get discarded. Let's perform that when being notified
about a resize while postcopy has been advised, but is not listening
yet. With precopy, the process is as following:
1. VM created
- RAM blocks are created
2. Incomming migration started
- Postcopy is advised
- All pages in RAM blocks are discarded
3. Precopy starts
- RAM blocks are resized to match the size on the migration source.
- RAM pages from precopy stream are loaded
- Uffd handler is registered, postcopy starts listening
4. Guest started, postcopy running
- Pagefaults get resolved, pages get placed
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-7-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.
Update the documentation. Postcopy will be handled separately.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Result @blocked is redundant. Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.
Since it was deprecated from the start, we can delete it without
the customary grace period. Do so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Starting from pss->page, ram_save_host_page() will check every page
and send the dirty pages up to the end of the current host page or
the boundary of used_length of the block. If the host page size is
a huge page, the step "check" will take a lot of time.
It will improve performance to use migration_bitmap_find_dirty().
Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G)
The time of ram_save_host_page() in the last round of ram saving:
before optimize: 9250us after optimize: 34us
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When the host page is a huge page and something is sent in the
current iteration, migration_rate_limit() should be executed.
If not, it can be omitted.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bulk stage is kind of weird: migration_bitmap_find_dirty() will
indicate a dirty page, however, ram_save_host_page() will never save it, as
migration_bitmap_clear_dirty() detects that it is not dirty.
We already fill the bitmap in ram_list_init_bitmaps() with ones, marking
everything dirty - it didn't used to be that way, which is why we needed
an explicit first bulk stage.
Let's simplify: make the bitmap the single source of thuth. Explicitly
handle the "xbzrle_enabled after first round" case.
Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right
now), there is now a slight change in behavior:
- Colo: When starting, it will be disabled (was implicitly enabled)
until the first round actually finishes.
- Free page hinting: When starting, XBZRLE will be disabled (was implicitly
enabled) until the first round actually finished.
- Snapshots: When starting, XBZRLE will be disabled. We essentially only
do a single run, so I guess it will never actually get disabled.
Postcopy seems to indirectly disable it in ram_save_page(), so there
shouldn't be really any change.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210216105039.40680-1-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename 'bs' to commonly used 'block' in migration/ram.c background
snapshot code.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-5-andrey.gruzdev@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
