Add a refcount_order parameter to qcow2_create2(), use that value for
the image header and for calculating the size required for
preallocation.
For now, always pass 4.
This addition requires changes to the calculation of the file size for
the "full" and "falloc" preallocation modes. That in turn is a nice
opportunity to add a comment about that calculation not necessarily
being exact (and that being intentional).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No longer refuse to open images with a different refcount entry width
than 16 bits; only reject images with a refcount width larger than 64
bits (which is prohibited by the specification).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add helper functions for getting and setting refcounts in a refcount
array for any possible refcount order, and choose the correct one during
refcount initialization.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since refcounts do not always have to be a uint16_t, all refcount blocks
and arrays in memory should not have a specific type (thus they become
pointers to void) and for accessing them, two helper functions are used
(a getter and a setter). Those functions are called indirectly through
function pointers in the BDRVQcowState so they may later be exchanged
for different refcount orders.
With the check and repair functions using this function, the refcount
array they are creating will be in big endian byte order; additionally,
using realloc_refcount_array() makes the size of this refcount array
always cluster-aligned. Both combined allow rebuild_refcount_structure()
to drop the bounce buffer which was used to convert parts of the
refcount array to big endian byte order and store them on disk. Instead,
those parts can now be written directly.
[ kwolf: Fixed a build failure on 32 bit and another with old glib ]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function for reallocating a refcount array, independent of
the refcount order. The newly allocated space is zeroed and the function
handles failed reallocations gracefully.
The helper function will always align the buffer size to a cluster
boundary; if storing the refcounts in such an array in big endian byte
order, this makes it possible to write parts of the array directly as
refcount blocks into the image file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts may have a width of up to 64 bits, so qemu should use the same
width to represent refcount values internally.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update_refcount() and qcow2_update_cluster_refcount() currently take a
signed addend. At least one caller passes a value directly derived from
an absolute refcount that should be reached ("l2_refcount - 1" in
expand_zero_clusters_in_l1()). Therefore, the addend should be unsigned
as well; this will be especially important for 64 bit refcounts.
Because update_refcount() then no longer knows whether the refcount
should be increased or decreased, it now requires an additional flag
which specified exactly that. The same applies to
qcow2_update_cluster_refcount().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts can theoretically be of type uint64_t; in order to be able to
represent the full range, qcow2_get_refcount() cannot use a single
variable to represent both all refcount values and also keep some values
reserved for errors.
One solution would be to add an Error pointer parameter to
qcow2_get_refcount(); however, no caller could (currently) pass that
error message, so it would have to be emitted immediately and be
passed to the next caller by returning -EIO or something similar.
Therefore, an Error parameter does not offer any advantages here.
The solution applied by this patch is simpler to use. Because no caller
would be able to pass the error message, they would have to print it and
free it, whereas with this patch the caller only needs to pass the
returned integer (which is often a no-op from the code perspective,
because that integer will be stored in a variable "ret" which will be
returned by the fail path of many callers).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_update_cluster_refcount() does not have any quick access to the
new refcount value, it has to call qcow2_get_refcount(). Some callers do
not need that new value at all, others call qcow2_get_refcount()
themselves anyway (albeit in a different code path, which can however be
easily changed), therefore there is no advantage in making
qcow2_update_cluster_refcount() return the new value. Drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bit width of every refcount entry to the format-specific
information.
In contrast to lazy_refcounts and the corrupt flag, this should be
always emitted, even for compat=0.10 although it does not support any
refcount width other than 16 bits. This is because if a boolean is
optional, one normally assumes it to be false when omitted; but if an
integer is not specified, it is rather difficult to guess its value.
This new field breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two new fields regarding refcount information (the bit width of
every entry and the maximum refcount value) to the BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add virtio MMIO support.
Add virtio-blk-test MMIO test case.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-6-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This malloc is a basic interface implementation that works for any platform.
It should be replaced in the future for a real malloc implementation for each
of the platforms.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-5-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert PCI-specific constants names of libqos virtio driver.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Modularize functions in virtio-blk-test and add PCI suffix for PCI specific
components.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-3-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert use of pointers in functions of virtio to uint64_t in order to make it
platform-independent.
Add casting from pointers (in PCI functions) to uint64_t and vice versa through
uintptr_t.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 1dc936aa84 (virtio-blk: Use blk_aio_ioctl) we silently lose
the request if blk_aio_ioctl returns NULL (not implemented).
Fix it by directly returning VIRTIO_BLK_S_UNSUPP as we used to do.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed build error on win32 ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to my reading of the Intel documentation, the SYSRET instruction
is supposed to force the RPL bits of the %ss register to 3 when returning
to user mode. The actual sequence is:
SS.Selector <-- (IA32_STAR[63:48]+8) OR 3; (* RPL forced to 3 *)
However, the code in helper_sysret() leaves them at 0 (in other words, the "OR
3" part of the above sequence is missing). It does set the privilege level
bits of %cs correctly though.
This has caused me trouble with some of my VxWorks development: code that runs
okay on real hardware will crash on QEMU, unless I apply the patch below.
Signed-off-by: Bill Paul <wpaul@windriver.com>
Message-Id: <201503091548.01462.wpaul@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas",
"megasas-gen2".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-5-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When setting "realized" fails, scsi_bus_legacy_add_drive() passes the
error to qerror_report_err(), then returns an unspecific "Setting
drive property failed" error, which is reported further up the call
chain.
Example:
$ qemu-system-x86_64 -nodefaults -S -display none \
> -drive if=scsi,id=foo,file=tmp.qcow2 -global isa-fdc.driveA=foo
qemu-system-x86_64: -drive if=scsi,id=foo,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use
qemu-system-x86_64: Setting drive property failed
qemu-system-x86_64: Initialization of device lsi53c895a failed: Device initialization failed
Clean up the obvious way: simply return the original error to the
caller. Gets rid of the second message in the above error cascade.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-4-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a818a4b changed scsi_bus_legacy_handle_cmdline() to report
errors from scsi_bus_legacy_add_drive() with error_report() in
addition to returning them. That's inappropriate.
Two kinds of callers:
1. realize methods (devices "esp", "virtio-scsi-device" and
"spapr-vscsi")
The error object gets passed up the call chain until it gets
reported again and freed.
Example:
$ qemu-system-arm -M virt -S -display none \
> -drive if=scsi,id=foo,bus=1,file=tmp.qcow2 \
> -device nec-usb-xhci -device usb-storage,drive=foo \
> -device virtio-scsi-pci
qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use
qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Setting drive property failed
qemu-system-arm: -device virtio-scsi-pci: Setting drive property failed
qemu-system-arm: -device virtio-scsi-pci: Device initialization failed
qemu-system-arm: -device virtio-scsi-pci: Device 'virtio-scsi-pci' could not be initialized
The second message in this error cascade comes from
scsi_bus_legacy_handle_cmdline(). The error object then gets
passed up to the qdev_init() called from
virtio_scsi_pci_init_pci(), which reports it again.
2. init methods (devices "am53c974", "dc390", "lsi53c895a",
"lsi53c810", "megasas", "megasas-gen2")
init methods need to report their errors with qerror_report().
These don't. The inappropriate error_report() papers over the bug.
error_report() isn't the same as qerror_report() in QMP context,
but this can't actually happen: QMP can still only hot-plug, and
callers call scsi_bus_legacy_handle_cmdline() only on cold-plug.
Except for sysbus_esp_realize(), but that can't be hot-plugged at
all, as far as I can tell.
Fix the init methods and drop the inappropriate error_report() in
scsi_bus_legacy_handle_cmdline().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-2-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a NULL pointer dereference in s390x-softmmu.
On pretty much all other architectures, creating an MMIO region calls
cpu_reload_memory_map. On s390, however, there are no MMIO regions
and everything is done via hypercalls.
Fixes: 9d82b5a792
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After forking, only the calling thread is duplicated in the child process.
The call_rcu thread has to be recreated in the child. Exploit the fact
that only one thread exists (same as when constructors run), and just redo
the entire initialization to ensure the threads are in the proper state.
The only additional things to do are emptying the list of threads
registered with RCU, and unlocking the lock that was taken in the prepare
callback (implementations are allowed to fail pthread_mutex_init()
if the mutex is still locked).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PTHREAD_MUTEX_ERRORCHECK is completely broken with respect to fork.
The way to safely do fork is to bring all threads to a quiescent
state by acquiring locks (either in callers---as we do for the
iothread mutex---or using pthread_atfork's prepare callbacks)
and then release them in the child.
The problem is that releasing error-checking locks in the child
fails under glibc with EPERM, because the mutex stores a different
owner tid than the duplicated thread in the child process. We
could make it work for locks acquired via pthread_atfork, by
recreating the mutex in the child instead of unlocking it
(we know that there are no other threads that could have taken
the mutex; but when the lock is acquired in fork's caller
that would not be possible.
The simplest solution is just to forgo error checking.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The curses user interface shows both the accumulated total and the
current event counts. Add column headers so it's clear what the numbers
mean.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ademar Reis <areis@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Message-Id: <1425338947-10296-2-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable user in struct iscsi_url is a character array, not a pointer.
Therefore its address will never be NULL.
clang reports this error:
block/iscsi.c:1329:20: warning:
comparison of array 'iscsi_url->user' not equal to a null pointer
is always true [-Wtautological-pointer-compare]
Reviewed-by: Peter Lieven <pl@kamp.de>
Acked-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1425719670-5486-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity reports that s->chr is checked after put_packet dereferences it.
Move the check earlier, consistent with the code used for user-mode
emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
man gcc:
Warn if in a loop with constant number of iterations the compiler
detects undefined behavior in some statement during one or more of
the iterations.
Milkymist pfpu has no jump instructions, so checking for MICROCODE_WORDS
instructions should have kept us in bounds of s->microcode, but i++
allowed one loop too many,
hw/misc/milkymist-pfpu.c: In function ‘pfpu_write’:
hw/misc/milkymist-pfpu.c:365:20: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
if (i++ >= MICROCODE_WORDS) {
^
hw/misc/milkymist-pfpu.c:167:14: note: possible undefined statement is here
uint32_t insn = s->microcode[pc];
^
The code can still access out of bounds, because it presumes that PC register
always begins at 0, and we allow writing to it.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
man gcc:
Warn about logical not used on the left hand side operand of a
comparison. This option does not warn if the RHS operand is of a
boolean type.
By preferring bool over int where sensible, but without modifying any
depending code, make GCC happy in cases like this,
qemu-img.c: In function ‘compare_sectors’:
qemu-img.c:992:39: error: logical not is only applied to the left hand
side of comparison [-Werror=logical-not-parentheses]
if (!!memcmp(buf1, buf2, 512) != res) {
hw/ide/core.c:1836 doesn't throw an error,
assert(!!s->error == !!(s->status & ERR_STAT));
even thought the second operand is int (and first hunk of this patch has
a very similar case), maybe GCC developers still have a little faith in
C programmers.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Remove trailing whitespace (fixes 9 errors from checkpatch.pl).
One comment line was longer than 80 characters, so wrap it
and fix a typo, too.
* Replace tabs by blanks (fixes 1 error).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
gcc reports this warning with -Wclobbered:
util/oslib-posix.c: In function ‘os_mem_prealloc’:
util/oslib-posix.c:374:49: error: argument ‘memory’ might be clobbered by
‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Fix this and simplify the code by using an existing macro.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
disas/microblaze.c:289:3: warning:
symbol 'opcodes' was not declared. Should it be static?
disas/microblaze.c:570:6: warning:
symbol 'register_prefix' was not declared. Should it be static?
disas/microblaze.c:571:6: warning:
symbol 'special_register_prefix' was not declared. Should it be static?
disas/microblaze.c:572:6: warning:
symbol 'fsl_register_prefix' was not declared. Should it be static?
disas/microblaze.c:573:6: warning:
symbol 'pvr_register_prefix' was not declared. Should it be static?
Remove the unused variable special_register_prefix.
The variable pvr_register_prefix was unused, too, but can be used.
Add also 'const' where possible.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
disas/arm.c:1552:15: warning:
symbol 'last_type' was not declared. Should it be static?
disas/arm.c:1553:5: warning:
symbol 'last_mapping_sym' was not declared. Should it be static?
disas/arm.c:1554:9: warning:
symbol 'last_mapping_addr' was not declared. Should it be static?
Instead of adding 'static', the unused variables and the unused code which
refers to those variables (which was deactivated a long time ago in
commit 4b0f1a8b) are removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If ret = macio_initfn_ide() is less than 0, the timer_memory
will leak the memory it points to.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
numero sign is the number sign key of Russian keyboard layout, we
get this key with 'shift + 3'. It's missing in current Russian keymap file,
this patch fixes it.
As number sign does not exsit in Russian keyboard layout[1][2], this
patch also removes the 'numbersign' from Russian keymap.
[1] http://en.wikipedia.org/wiki/Keyboard_layout#Russian
[2] http://kbd-intl.narod.ru/english/layouts
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds missing cyrillic character 'numerosign' to the VNC
keysym table, it's needed by Russian keyboard. And I get the keysym from
'<X11/keysymdef.h>', the current keysym table in Qemu was generated from
it.
Signed-off-by: Wang xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The value is called channel-type, not connection-type
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function is not used anymore, and thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
