Where VQSHL of a signed 8/16/32 bit value saturated, the result
value was not being calculated correctly (it should be either
the minimum or maximum value for the size of the signed type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a pointless else clause in the neon_qshl_u64 helper.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VQSHL of a signed 64 bit non-zero value by a shift count >= 64 should
saturate; return the correct value in this case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a missing '-' which meant that we were misinterpreting the shift
argument for VQSHL of 64 bit signed values and treating almost every
shift value as if it were an extremely large right shift.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the arguments passed when generating neon qshl_{u,s}64()
helpers so that we use the correct registers.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The translation of REVSH shifted the low byte 8 steps left before performing
an 8-bit sign extend, causing this part of the expression to alwas be 0.
Reported-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the softfloat conversion routines for conversion to 16 bit
integers, because just casting to a 16 bit type truncates the
value rather than saturating it at 16-bit MAXINT/MININT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
VCVT of 16 bit fixed point to float should ignore the top 16 bits
of the source register. Cast to int16_t and friends rather than
int16 -- the former is guaranteed exactly 16 bits wide where the
latter is merely at least 16 bits wide (and so is usually 32 bits).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The ARM ARM defines that if the input to a single<->double conversion
is a NaN then the output is always forced to be a quiet NaN by setting
the most significant bit of the fraction part.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The ARM architecture mandates that converting a NaN value to
integer gives zero (if Invalid Operation FP exceptions are
not being trapped). This isn't the behaviour of the SoftFloat
library, so NaNs must be special-cased.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Fix errors in the decoding of the Neon forms of fixed-point VCVT:
* fixed-point VCVT is op 14 and 15, not 15 and 16
* the fbits immediate field was being misinterpreted
* the sense of the to_fixed bit was inverted
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Correct the decoding of source and destination registers
for the VFP forms of the VCVT instructions which convert
between floating point and integer or fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Correct ldrexd and strexd code to always read and write the
high word of the 64-bit value from addr+4.
Also make ldrexd and strexd agree that for a 64 bit value the
address in env->exclusive_addr is that of the low word.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/670883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Refine check on bkpt so that smc and undefined instruction encodings are
handled as an undefined instruction and trap.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The thumb2 decoder contained a mixup between the bit controlling
doubling and the bit controlling if the operation was an add or a sub.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The PKHxx instructions were not recognized by the thumb2 decoder. The
solution provided in this changeset is identical to the arm-mode
implementation.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Expose the vfp_get_fpscr() and vfp_set_fpscr() functions to C
code as well as generated code, so we can use them to read and
write the FPSCR when saving and restoring VFP registers across
signal handlers in linux-user mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
In linux-user mode, the XScale/iWMMXT coprocessors must be enabled
at reset so that we can run code that uses these instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When combining multiple values as part of a NEON array load, do explcit
shift/or rather than using gen_bfi. This voids redundant mask
operations.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Booting an arm kernel has been broken a while when booting from non zero start
address. This is due to the order of events: board init loads the kernel and
sets register 15 to the start address and then qemu_system_reset reset the cpu
making register 15 zero again.
This patch fixes the usage of the register 15 start address trick in
combination with arm_load_kernel.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This prevent coprocessor IO structure from being reset on cpu reset. This was
a problem for PXA which uses coprocessor 6 and 14.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch fixes few resource leaks in the iwmmxt disassemble.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move ARMv7-M PC/SP initialization to the CPU reset routine. Add a board
reset routine to call this. Also load values directly from ROM as
images have not been copied yet.
Avoid clearing the NVIC pointer on cpu reset.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Don't set PAGE_EXEC for XN pages, to avoid a bypass of XN protection
checking if the page is already in the TLB.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Do not try to insert a conditional jump over next instruction when the
condition code is AL as this will trigger an internal error.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
The rfe instruction can be used with any register, not just sp. Adjust the
condition check accordingly.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's a return missing in the srs handling which leads to srs always being
treated an an invalid op.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
implementation only widened the 32bit source vector elements into a
64bit destination vector but forgot to perform the actual shifting
operation.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The rounding/truncating options were inverted. truncating
was done when rounding was meant and vice verse.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the "subs pc, lr" Thumb-2 exception return instruction.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Paul Brook <paul@codesourcery.com>
The Thumb CPS currently does not work correctly: CPSID touches more bits
than the instruction wants to, and CPSIE does nothing. Fix it by
passing the correct mask (the "affect" bits) and value.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.
This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.
While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Current code is broken at least on recent compilers, comparison
between signed and unsigned types yield incorrect code and render
the neon shift helper functions defunct. This is the third revision
of this patch, casting all comparisons with the sizeof operator to
signed ssize_t type to force comparisons to be between signed integral
types.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Shift by immediate value is incorrectly overwritten by a temporary
variable in the processing of NEON vsri, vshl and vsli instructions.
This patch has been revised to also include a fix for the special
case where the code would previously try to shift an integer value
over 31 bits left/right.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other bits except for the EN in the VFP FPEXC register are defined
as subarchitecture specific and real functionality for any of the
other bits has not been implemented in QEMU. However, current code
allows modifying all bits in the VFP FPEXC register leading to
problems when guest code is writing 1's to the subarchitecture
specific bits and checking whether the bits stay up to verify the
existence of functionality which in fact does not exist in QEMU.
This patch has been revised to include the same behavior change in
the gdb register write function.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for NEON vld1.64 and vst1.64 instructions. This patch is
revised to follow more closely the specification and raises
undefined exception if 64bit element size is used for vld2/vst2 or
vld4/vst4 instructions.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the existing code shift value is clobbered during the pass loop.
This patch changes the code so that it stores the intermediate
result in the target neon register directly and eliminates the need
to use a temporary to hold the intermediate value thus leaving the
shift value in the temporary variable intact. This is a new patch
in this version of the patch series.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tmp4 and tmp5 temporary variables are allocated using tcg_const_i32
but incorrectly released using dead_tmp which will cause resource
leak tracking to report false leaks.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Current implementation of thumb mul instruction is implemented as a
32x32->64 multiply which then uses only 32 least significant bits of
the result. Replace that with a simple 32x32->32 multiply.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Revised patch for getting rid of tcg temporary variable leaks in
target-arm/translate.c. This version also includes the leak patch for
gen_set_cpsr macro, now converted as a static inline function, which I
sent earlier as a separate patch on top of this patch.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(INT32_MIN / -1) triggers an overflow, and the result depends on the
host architecture (INT32_MIN on arm, -1 on ppc, SIGFPE on x86). Use a
test to output the correct value.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
The goal is eventually to get rid of all cpu_T register usage and to use
just short-lived tmp/tmp2 registers. This patch converts all the places where
cpu_T was used in the Thumb code and replaces it with explicit TCG register
allocation.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Uninitialized register was used instead of proper TCG variable.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The neon_trn_u8, neon_trn_u16, neon_unzip_u8, neon_zip_u8 and neon_zip_u16
helpers used fixed registers to return values. This patch replaces that with
TCG code, so T0/T1 is no longer directly used by the helper functions.
Bugs in the gen_neon_unzip register load code were also fixed.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of 'IA' and 'DB' conditions was swapped.
SRS instruction must store banked SPSR instead of CPSR at the specific address.
Missing 'return' statement at the end of RFE handling.
Fixed write-back code to reference correct registers.
From: Hyeonsung Jang <hsjang@ok-labs.com>
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The temporary variable cache in no longer need since tcg_temp_free was introduced.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently each read/write of ARM register involves a LD/ST TCG operation. This
patch uses TCG memory-backed registers to represent the ARM register set. With
memory-backed registers the LD/ST operations are transparently generated by TCG
and host registers could be used to optimize the generated code.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
handle_cpu_signal is very nearly copy-paste code for each target, with a
few minor variations. This patch sets up appropriate defaults for a
generic handle_cpu_signal and provides overrides for particular targets
that did things differently. Fixing things like the persistent (XXX:
use sigsetjmp) should now become somewhat easier.
Previous comments on this patch suggest that the "activate soft MMU for
this block" comments refer to defunct functionality. I have removed
such blocks for the appropriate targets in this patch.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ARMv7 defines a new behavior for ARM data processing instructions
compared to earlier architecture revisions; when the destination
register is R15, a Branch and Exchange operation is executed rather
than a simple Branch to the target address. This patch corrects the
behavior of the emulation for the aforementioned operations. To be
applied after applying the previous patch in this patch set.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Paul Brook <paul@codesourcery.com>
Modernize parts of target-arm/translate.c in preparation for the
modifications in the subsequent patch in this patch set. This is done
in order to avoid writing new code to target-arm/translate.c that
would use deprecated methods and/or variables.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Paul Brook <paul@codesourcery.com>
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
According to ARM Cortex A8 Technical Reference Manual, the reset value for CP15 c1 auxiliary control
register is 2, not zero (page 3.12).
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6771 c046a42c-6fe2-441c-8c8c-71466251a162
Fix remaining arm warnings - except for the mess in the NetWinder FP
emulator.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6766 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes:
/scratch/froydnj/qemu.git/target-arm/helper.c:451: warning: no previous prototype for 'cpu_arm_handle_mmu_fault'
by moving the declaration of the function to cpu.h from exec.h. cpu.h
seems to be the place most other ports declare the corresponding
function.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6550 c046a42c-6fe2-441c-8c8c-71466251a162
Original idea&code by Kevin Wolf, split-up in two patches and added more
archs.
This patch introduces a flag to log CPU resets. Useful for tracing
unexpected resets (such as those triggered by x86 triple faults).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6452 c046a42c-6fe2-441c-8c8c-71466251a162
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
EE state, just the associated system coprocessor registers. It is sufficient
to keep OS setup and context switching code happy.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6104 c046a42c-6fe2-441c-8c8c-71466251a162
The TSC2102 chip is not included in documentation because a patch is
pending.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6038 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the destination and accumulator registers for the smmul
and smmla instructions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5913 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the destination and accumulator registers for the usad8
and usada8 instructions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5912 c046a42c-6fe2-441c-8c8c-71466251a162
- gen_set_CF_bit31: use the right value to set carry flag
- shifter_out_im: remove a spurious semi-colon
- add a break for VSHRN, VRSHRN, VQSHRN, VQRSHRN
size 2 case
- sbfx, ubfx are v6t2 instructions
The correct cps user mode behaviour is unclear so it's left out from the
commit until ARM decides it.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5908 c046a42c-6fe2-441c-8c8c-71466251a162
- remove macros that are not used
- remove disass structure is_mem field which value is never used
- correct a typo in a comment.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5907 c046a42c-6fe2-441c-8c8c-71466251a162
All archs use the same cpu_loop_exit, so move the prototype in a common
header. i386 was carrying a __hidden attribute, but that was empty for
this arch anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5820 c046a42c-6fe2-441c-8c8c-71466251a162
This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162
Now that we can properly restore the pc on watchpoint hits, there is no
more need for prematurely terminating TBs if watchpoints are present.
Remove all related bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5742 c046a42c-6fe2-441c-8c8c-71466251a162
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the
succeeding enhancements this series comes with.
First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching
to dynamically allocated data structures that are kept in linked lists.
This also allows to return a stable reference to the related objects,
required for later introduced x86 debug register support.
Breakpoints and watchpoints are stored with their full information set
and an additional flag field that makes them easily extensible for use
beyond pure guest debugging.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
This patch refactors the way the CPU state is handled that is associated
with a TB. The basic motivation is to move more arch specific code out
of generic files. Specifically the long #ifdef clutter in tb_find_fast()
has to be overcome in order to avoid duplicating it for the gdb
watchpoint fixes (patch "Restore pc on watchpoint hits").
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5736 c046a42c-6fe2-441c-8c8c-71466251a162
as macros should be avoided when possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5735 c046a42c-6fe2-441c-8c8c-71466251a162
After a quick code review, it seems to be a bad cut-n-paste between
16-bit and 8-bit UADD/USUB, indeed UADD8/USUB8 tries to set GE bits by
pair instead of one at a time.
Besides, the addition operations (UADD8/UADD16) set GE bits to "NOT
carry" instead of "carry" (probably once again due to a copy of the
substraction code which sets flags to "NOT borrow")
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4900 c046a42c-6fe2-441c-8c8c-71466251a162
According to ARM Reference Manual (DDI0100 A4.1.16),
bit 5 is fixed to 0 (bit 4 is the MSB of the mode), so the instruction mask
should be 0x0ff10020 not 0x0ff10010.
Besides, mmod flag is bit 17 (b14 is SBZ)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4899 c046a42c-6fe2-441c-8c8c-71466251a162
helper.c
- copy reference c0_c2 to runtime c0_c2 and not c0_c1
op_helper.c
- remove old code (PARAM1, probably some left over from old dyngen)
that broke do_[us]sat
translate.c
- gen_smul_dual should sign-extend from 16 bit to 32 bit and not from
8 to 32
- disas_arm_insn:
* smlalxy: that was completely wrong; now the addition is
performed as for smlald
* pkhtb: optional ASR not taken into account (similar
* to [us]sat)
* pkhtb/pkhbt: tmp2 is dead
* smlald, smlsld, smuad, smusd, smlad, smlsd: rd
* and rn swapped
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4898 c046a42c-6fe2-441c-8c8c-71466251a162
Save and restore env->interrupt_request and env->halted.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4817 c046a42c-6fe2-441c-8c8c-71466251a162
This adds basic support for emulating Sharp Zaurus SL-6000 PDA (tosa).
Currently it provides only basic support: no kbd/lcd, sound, ts, etc.
But it's able at least to boot Linux from CF.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4643 c046a42c-6fe2-441c-8c8c-71466251a162
Add the OMAP242x (arm1136 core) initialisation with basic on-chip
peripherals and update OMAP1 peripherals which are re-used in OMAP2.
Make palmte.c and sd.c errors go to stderr.
Allow disabling SD chipselect.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4213 c046a42c-6fe2-441c-8c8c-71466251a162
The fconst change is partly a guess.
VFP_OP1 is still unused.
An ARMv6 target still won't boot.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4210 c046a42c-6fe2-441c-8c8c-71466251a162
