Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.
Cc: qemu-s390x@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At present, we're referencing env->psw.mask directly, which
fails to ensure that env->cc_op is incorporated or updated.
Use s390_cpu_{set_psw,get_psw_mask} to fix this.
Mirror the kernel's cleaning of the psw.mask in save_sigregs
and restore_sigregs. Ignore PSW_MASK_RI for now, as qemu does
not support that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reorder the function bodies to correspond to the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At point of usage, it's not immediately obvious that
we don't need a loop to copy these arrays.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The original value of frame_addr is still required for
its use in the call to unlock_user_struct below.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to properly present these arguments, we need to add
code to target/s390x to record LowCore parameters for user-only.
But in the meantime, at least zero the missing last_break
argument, and fixup the comment style in the vicinity.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA}
in the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "save" routines copied from the kernel, which are currently
commented out, are unnecessary in qemu. We can copy from env
where the kernel needs special instructions. Fix comment style.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the host address of &frame->sregs is incorrect.
We need the guest address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Directly reading sc->regs.psw.addr misses the bswap
that may be performed by __get_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function cannot fail.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is an unnecessary complication since we only
support 64-bit mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the right type simplifies the frame setup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Noticed via gitlab clang-user job:
TEST signals on s390x
../linux-user/s390x/signal.c:258:9: runtime error: \
1.84467e+19 is outside the range of representable values of \
type 'unsigned long'
Which points to the fact that we were performing a double-to-uint64_t
conversion while storing the fp registers, instead of just copying
the data across.
Turns out there are several errors:
target_ulong is the size of the target register, whereas abi_ulong
is the target 'unsigned long' type. Not a big deal here, since we
only support 64-bit s390x, but not correct either.
In target_sigcontext and target ucontext, we used a host pointer
instead of a target pointer, aka abi_ulong.
Fixing this allows the removal of a cast to __put_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When setting up the pointer for the sigreturn stub in the return
address register (r14) we currently use the host frame address instead
of the guest frame address.
Note: This only caused problems if Qemu has been built with
--disable-pie (as it is in distros nowadays). Otherwise guest_base
defaults to 0 hiding the actual problem.
Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324185128.63971-1-krebbel@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
No code change, only move code from signal.c to
s390x/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-10-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>