This caused an assertion failure until recently because the BlockBackend
would be detached on unplug, but was in fact never attached in the first
place. Add a regression test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This test makes sure that all block devices show up on 'info block',
with all of the expected information, in different configurations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 181 only works for formats which support live migration (naturally,
as it is a live migration test). Disable it for all formats which do
not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170621131157.16584-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 138 and 158 iotests exercise the legacy qcow2 aes encryption
code path and they work fine with qcow v1 too.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-16-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 048 is designed to verify data preservation during an
image resize. The qcow (v1) format impl has never supported
resize so always fails.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 042 is designed to verify operation with zero sized images.
Such images are not supported with qcow (v1), so this test has
always failed.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Perform the savevm/loadvm test with both iothread on and off. This
covers the recently found savevm/loadvm hang when iothread is enabled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy -hda option does not support -drive/-device parameters. They
will be required by the next patch that extends this test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
After _cleanup_qemu(), test cases should be able to start the next qemu
process and call _cleanup_qemu() for that one as well. For this to work
cleanly, we need to improve the cleanup so that the second invocation
doesn't try to kill the qemu instances from the first invocation a
second time (which would result in error messages).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kkU0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 29 May 2017 03:34:59 PM BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream:
block/file-*: *_parse_filename() and colons
block: Fix backing paths for filenames with colons
block: Tweak error message related to qemu-img amend
qemu-img: Fix leakage of options on error
qemu-img: copy *key-secret opts when opening newly created files
qemu-img: introduce --target-image-opts for 'convert' command
qemu-img: fix --image-opts usage with dd command
qemu-img: add support for --object with 'dd' command
qemu-img: Fix documentation of convert
qcow2: remove extra local_error variable
mirror: Drop permissions on s->target on completion
nvme: Add support for Controller Memory Buffers
iotests: 147: Don't test inet6 if not available
qemu-iotests: Test streaming with missing job ID
stream: fix crash in stream_start() when block_job_create() fails
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When converting a 1.1 image down to 0.10, qemu-iotests 060 forces
a contrived failure where allocating a cluster used to replace a
zero cluster reads unaligned data. Since it is a zero cluster
rather than a data cluster being converted, changing the error
message to match our earlier change in 'qcow2: Make distinction
between zero cluster types obvious' is worthwhile.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170508171302.17805-1-eblake@redhat.com
[mreitz: Commit message fixes]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is the case in our docker tests, as we use --net=none there. Skip
this method.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a small test for the image streaming error path for failing
block_job_create(), which would have found the null pointer dereference
in commit a170a91f.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host. While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management. The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.
Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.
Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).
Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:
event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}
Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup. Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.
See also https://bugzilla.redhat.com/1384007
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We've already improved discards to operate efficiently on the tail
of an unaligned qcow2 image; it's time to make a similar improvement
to write zeroes. The special case is only valid at the tail
cluster of a file, where we must recognize that any sectors beyond
the image end would implicitly read as zero, and therefore should
not penalize our logic for widening a partial cluster into writing
the whole cluster as zero.
However, note that for now, the special case of end-of-file is only
recognized if there is no backing file, or if the backing file has
the same length; that's because when the backing file is shorter
than the active layer, we don't have code in place to recognize
that reads of a sector unallocated at the top and beyond the backing
end-of-file are implicitly zero. It's not much of a real loss,
because most people don't use images that aren't cluster-aligned,
or where the active layer is a different size than the backing
layer (especially where the difference falls within a single cluster).
Update test 154 to cover the new scenarios, using two images of
intentionally differing length.
While at it, fix the test to gracefully skip when run as
./check -qcow2 -o compat=0.10 154
since the older format lacks zero clusters already required earlier
in the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-11-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
No tests were covering write zeroes with unmap. Additionally,
I needed to prove that my previous patches for correct status
reporting and write zeroes optimizations actually had an impact.
The test works for cluster_size between 8k and 2M (for smaller
sizes, it fails because our allocation patterns are not contiguous
with small clusters - in part, the largest consecutive allocation
we tend to get is often bounded by the size covered by one L2
table).
Note that testing for zero clusters is tricky: 'qemu-io map'
reports whether data comes from the current layer of the image
(useful for sniffing out which regions of the file have
QCOW_OFLAG_ZERO) - but doesn't show which clusters have mappings;
while 'qemu-img map' sees "zero":true for both unallocated and
zero clusters for any qcow2 with no backing layer (so less useful
at detecting true zero clusters), but reliably shows mappings.
So we have to rely on both queries side-by-side at each point of
the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-10-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Although _filter_qemu_img_map documents that it scrubs offsets, it
was only doing so for human mode. Of the existing tests using the
filter (97, 122, 150, 154, 176), two of them are affected, but it
does not hurt the validity of the tests to not require particular
mappings (another test, 66, uses offsets but intentionally does not
pass through _filter_qemu_img_map, because it checks that offsets
are unchanged before and after an operation).
Another justification for this patch is that it will allow a future
patch to utilize 'qemu-img map --output=json' to check the status of
preallocated zero clusters without regards to the mapping (since
the qcow2 mapping can be very sensitive to the chosen cluster size,
when preallocation is not in use).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-9-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Treat plain zero clusters differently from allocated ones, so that
we can simplify the logic of checking whether an offset is present.
Do this by splitting QCOW2_CLUSTER_ZERO into two new enums,
QCOW2_CLUSTER_ZERO_PLAIN and QCOW2_CLUSTER_ZERO_ALLOC.
I tried to arrange the enum so that we could use
'ret <= QCOW2_CLUSTER_ZERO_PLAIN' for all unallocated types, and
'ret >= QCOW2_CLUSTER_ZERO_ALLOC' for allocated types, although
I didn't actually end up taking advantage of the layout.
In many cases, this leads to simpler code, by properly combining
cases (sometimes, both zero types pair together, other times,
plain zero is more like unallocated while allocated zero is more
like normal).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-7-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use blkdebug's new geometry constraints to emulate setups that
have needed past regression fixes: write zeroes asserting
when running through a loopback block device with max-transfer
smaller than cluster size, and discard rounding away portions
of requests not aligned to preferred boundaries. Also, add
coverage that the block layer is honoring max transfer limits.
For now, a single iotest performs all actions, with the idea
that we can add future blkdebug constraint test cases in the
same file; but it can be split into multiple iotests if we find
reason to run one portion of the test in more setups than what
are possible in the other.
For reference, the final portion of the test (checking whether
discard passes as much as possible to the lowest layers of the
stack) works as follows:
qemu-io: discard 30M at 80000001, passed to blkdebug
blkdebug: discard 511 bytes at 80000001, -ENOTSUP (smaller than
blkdebug's 512 align)
blkdebug: discard 14371328 bytes at 80000512, passed to qcow2
qcow2: discard 739840 bytes at 80000512, -ENOTSUP (smaller than
qcow2's 1M align)
qcow2: discard 13M bytes at 77M, succeeds
blkdebug: discard 15M bytes at 90M, passed to qcow2
qcow2: discard 15M bytes at 90M, succeeds
blkdebug: discard 1356800 bytes at 105M, passed to qcow2
qcow2: discard 1M at 105M, succeeds
qcow2: discard 308224 bytes at 106M, -ENOTSUP (smaller than qcow2's
1M align)
blkdebug: discard 1 byte at 111457280, -ENOTSUP (smaller than
blkdebug's 512 align)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-10-eblake@redhat.com
[mreitz: For cooperation with image locking, add -r to the qemu-io
invocation which verifies the image content]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mixing byte offset and sector allocation counts is a bit
confusing. Also, reporting n/m sectors, where m decreases
according to the remaining size of the file, isn't really
adding any useful information; and reporting an offset at
both the front and end of the line, with large amounts of
whitespace, is pointless. Update the output to use byte
counts and shorter lines, then adjust the affected tests
(./check -qcow2 102, ./check -vpc 146).
Note that 'qemu-io map' is MUCH weaker than 'qemu-img map';
the former only shows which regions of the active layer are
allocated, without regards to where the allocation comes from
or whether the allocated portion is known to read as zero
(because it is using the weaker bdrv_is_allocated()); while the
latter (especially in --output=json mode) reports more details
from bdrv_get_block_status().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-4-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For the 'alloc' command, accepting an offset in bytes but a length
in sectors, and reporting output in sectors, is confusing. Do
everything in bytes, and adjust the expected output accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-3-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
