AHCI provides two ways of reading/writing data:
1) NCQ
2) ATA commands with the LBA in the command FIS
In the second code path, we didn't handle any LBAs that were bigger than
16 bits, so whenever a guest that used high LBA numbers wanted to access
data, the LBA got truncated down to 16 bits, giving the guest garbage.
This patch adds support for LBAs higher than 16 bits. I've tested that it
works just fine with SeaBIOS and Linux guests. This patch also unbreaks
the often reported grub errors people have seen with AHCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes qemu ignore unplug requests from the guest for pci
devices which are tagged as non-hotpluggable. Trouble spot is the
piix4 chipset with the ISA bridge. Requests to unplug that one will
make it go away together with all ISA bus devices, which are not
prepared to be unplugged and thus don't cleanup, leaving active
qemu timers behind in free'ed memory.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No users of bdrv_get_type_hint() left. bdrv_set_type_hint() can make
the media removable by side effect. Make that explicit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
query-block's specification documents response member "type" with
values "hd", "cdrom", "floppy", "unknown".
Its value is unreliable: a block device used as floppy has type
"floppy" if created with if=floppy, but type "hd" if created with
if=none.
That's because with if=none, the type is at best a declaration of
intent: the drive can be connected to any guest device. Its type is
really the guest device's business. Reporting it here is wrong.
No known user of QMP uses "type". It's unlikely that any unknown
users exist, because its value is useless unless you know how the
block device was created. But then you also know the true value.
Fixing the broken value risks breaking (hypothetical!) clients that
somehow rely on the current behavior. Not fixing the value risks
breaking (hypothetical!) clients that rely on the value to be
accurate. Can't entirely avoid hypothetical lossage. Change the
value to be always "unknown".
This makes "info block" always report "type=unknown". Pointless.
Change it to not report the type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ide-hd has to suppress the default CD-ROM, or else you can't put one
on secondary master without -nodefaults.
Unlike legacy scsi-disk, scsi-cd suppresses default CD-ROM.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A "scsi-disk" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "scsi-hd" and "scsi-cd" to model disk vs. CD in
the guest part.
Keep scsi-disk for backward compatibility.
Don't copy scsi-disk property removable to scsi-cd. It's not used and
always zero(!) there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An "ide-drive" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "ide-hd" and "ide-cd" to model disk vs. CD in
the guest part.
Keep ide-drive for backward compatibility.
"ide-disk" would perhaps be a nicer name than "ide-hd", but there's
already "scsi-disk", which is like "ide-drive", and will be likewise
split in the next commit. {ide,scsi}-{hd,cd} is the best consistent
set of names I could find within the backward compatibility
straightjacket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The .bdrv_truncate() operation resizes images and growing is easy to
implement in QED. Simply check that the new size is valid and then
update the image_size header field to reflect the new size.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I run qemu-img under profiler and realized, that most of CPU time is
consumed by is_not_zero() function. I had made a couple of optimizations
on it and got the following output for `time qemu-img convert -O qcow2
volume.qcow2 snapshot.qcow2`:
Original qemu-img:
real 0m56.159s
user 0m34.670s
sys 0m12.079s
Patched qemu-img:
real 0m34.805s
user 0m18.445s
sys 0m12.552s
Signed-off-by: Dmitry Konishchev <konishchev@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.
QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed. In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.
It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed. This patch adds a timer
after the last allocating write request completes. When the timer fires
it will flush and then clear the dirty bit. The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers may use timers for flushing metadata to disk or
reconnecting to a network drive. Stub out the following functions in
qemu-tool.c:
QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, int scale,
QEMUTimerCB *cb, void *opaque)
void qemu_free_timer(QEMUTimer *ts)
void qemu_del_timer(QEMUTimer *ts)
void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time)
int64_t qemu_get_clock_ns(QEMUClock *clock)
They will result in timers never firing when linked against qemu-tool.o.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If ahci_dma_set_inactive is called a while there is still a pending BH
from a previous run, we will crash on the second run of
ahci_check_cmd_bh as it overwrites AHCIDevice::check_bh. Avoid this
broken and redundant duplicate registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These printfs aren't really debug messages, but clearly indicate a bug if they
ever become effective. Noone uses DEBUG_IDE, let's re-enable the check
unconditionally and make it an assertion instead of printfs in the device
emulation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
hw/xen_disk.c:309: style:
Variable 'len' is assigned a value that is never used
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A thread should only be counted as idle when it really is waiting for new
requests. Without this patch, sometimes too few threads are started as busy
threads are counted as idle.
Not sure if it makes a difference in practice outside some artificial
qemu-io/qemu-img tests, but I think the change makes sense in any case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix regression of 667bb59: ahci_init initializes ahci.mem, so we have to
move bar registration after it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
target-ppc/cpu.h now needs ffs(), too, so ffs() must be declared
before this file is included.
Moving the declaration from qemu-common.h to qemu-os-win32.h
(which is included in qemu-common.h early) fixes the compiler
warning for w32.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Include the list of available targets in the --help output
for the --target-list= option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
cppcheck report:
target-lm32/translate.c:587: style:
Variable 't0' is assigned a value that is never used
target-lm32/translate.c:588: style:
Variable 'l1' is assigned a value that is never used
Remove both variables. Please check whether that is the correct solution.
Cc: Michael Walle <michael@walle.cc>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct handling of NaNs for VFP VMLA, VMLS, VNMLS and VNMLA requires that
we implement the set of negations and additions specified by the ARM ARM;
plausible looking simplifications like turning (-A + B) into (B - A) or
computing (A + B) rather than (B + A) result in selecting the wrong NaN or
returning a NaN with the wrong sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Phillip Merensky reported that the special keys (e.g. Ctrl-Alt-f for full
screen) did not work correctly if -alt-grab is used.
BUG: 696530
Review of ui/sdl.c:sdl_refresh indicates that this is the intended behaviour,
so we should update the documentation to match the actual behaviour, as
suggested by Phillip in the bug report.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
Fix wrong number of bits used when sign extending the branch offset of BPcc
instructions.
Reported-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use TCG local to work around TCG register flush due to a branch.
Thanks to Artyom Tarasenko, Igor Kovalenko and Aurelien Jarno.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The e500 PCI controller isn't qdev'ified yet. This leads to severe issues
when running with -drive.
To be able to use a virtio disk with an e500 VM, let's convert the PCI
controller over to qdev.
Reviewed-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have some nice helpers that can find us a TLB entry, let's
use that on the machine initialization code, so we don't need to know
about the internals of the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
To enable quick runtime detection of instruction groups to the currently
selected CPU emulation, we have a feature mask of what exactly the respective
instruction supports.
This feature mask is 64 bits long and we just successfully exceeded those 64
bits. To add more features, we need to think of something.
The easiest solution that came to my mind was to simply add another 64 bits
that we can also match on. Since the comparison is only done on start of the
qemu process to generate an internal opcode calling table, we should be fine
on any performance penalties here.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation was only used with KVM so far, so some
parts of the code didn't provide proper values for non-KVM execution.
This patch makes the machine work without KVM enabled. To actually use
this, you also need proper e500v2 MMU emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation code ignored the user defined -cpu switch.
This patch enables it to only provide a sane default, not force an e500v2
CPU inside.
Signed-off-by: Alexander Graf <agraf@suse.de>
The pSeries machine uses two tables to look up guest hcalls for emulation.
One of these is exactly one entry too small to hold all the hcalls it needs
to, leading to memory corruption.
This patch fixes the bug, and while we're at it, make both tables 'static'
since they're never used from other modules.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On ppc64 host, recursion into pc-bios/spapr-rtas/ fails for
out-of-tree builds. Add missing dir and symlink.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, the default PAGE_SIZE is 64kb. Unfortunately, the hardware
alignments don't match here: There are RAM and MMIO regions within
a single page when it's 64kb in size.
So the only way out for now is to tell the user that he should use 4k
PAGE_SIZE.
This patch gives the user a hint on that, telling him that failing to
register a prefix slot is most likely to be caused by mismatching PAGE_SIZE.
This way it's also more future-proof, as bigger PAGE_SIZE can easily be
supported by other machines then, as long as they stick to 64kb granularities.
Signed-off-by: Alexander Graf <agraf@suse.de>
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Classic/server ppc has had SREGS for a while now (though I think not
always?), but it's still missing for booke. Check the capability before
calling KVM_SET_SREGS.
Without this, booke kvm fails to boot as of commit
84b4915dd2 (kvm: Handle kvm_init_vcpu
errors).
Also, don't write random stack state into the non-PVR sregs fields --
have kvm fill it in first.
Eventually booke will have sregs and it will have its own capability to
be tested here. However, we will want a way for platform code to request
to look like the actual CPU we're running on, especially if SoC devices
are being directly assigned.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Darwin assembler fails to build it.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the qemu pseries machine numbers its virtual serial devices
from 0. However, existing pSeries machines running pHyp number them from
0x30000000.
In theory these indices are arbitrary, since everything necessary for the
kernel to find them is advertised in the device tree. However the debian
installer, at least, incorrectly looks for a device named vty@30... to
determine whether to use the hypervisor console.
Therefore this patch moves the numbers we use to match the existing pHyp
practice, in order to workaround broken userspace apps of this type.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the qemu emulated pseries machine puts
"qemu,emulated-pSeries-LPAR" in the device tree's root level 'model'
property. Unfortunately this confuses some installers and ybin, which
expect this to start with "IBM" on pSeries machines. This patch addresses
this problem, making the property more closely resemble the pattern of
existing real hardware.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The original pSeries machine was limited to 32 CPUs, more or less
arbitrarily. Particularly when we get SMT KVM guests it will be
pretty easy to exceed this. Therefore, raise the max number of CPUs
in a pseries machine guest to 256.
Signed-off-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
