Commit Graph

40 Commits

Author SHA1 Message Date
Alexander Graf
332261de2b pci: Move PCI VGA to pci.mak
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move
it to pci.mak to enable it for everyone.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13 05:46:08 +00:00
Maciej W. Rozycki
dff4021730 mips: Remove CONFIG_VT82C686 from non-Fulong configs
Fix the regression introduced with commit
47934d0aad [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS.  Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).

Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07 11:15:49 +00:00
Aurelien Jarno
cc413a3935 mips_malta: do not raise exceptions when accessing invalid memory
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.

Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.

Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-14 16:47:30 +02:00
Paolo Bonzini
be6d08be25 default-configs: add test device to all machines supporting ISA
This will let these machines run an endianness test for ISA
I/O port space.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini
61fcb62862 isa_mmio: delete
It is not used anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:27 -05:00
Paolo Bonzini
98af93fde2 audio: replace audio card configuration with default-configs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:16:37 -05:00
Paolo Bonzini
47934d0aad hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini
0ddfaf7fe4 hw: move MC146818RTC to hw/timer/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini
49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Gerd Hoffmann
6c83f81542 make usb devices configurable
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally.  Make the other ones configurable.

Exceptions:
  - bluetooth: not qdevified yet, has a vl.c dependency because
    of that, thus disabling isn't as easy as not linking the
    object file.
  - smardcard: ccid-card-emulated depends on that one *and*
    CONFIG_SMARTCARD_NSS.  So it isn't a one-liner and comes
    as separate patch because of that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19 12:28:48 +01:00
Hervé Poussineau
78207d80a3 jazz-led: compile it only twice
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22 09:02:19 -06:00
Blue Swirl
3d402831de vga: make Cirrus ISA device optional
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-22 07:28:23 +00:00
Jan Kiszka
cfce6d8934 i8259: Move to hw library
No target-specific bits remaining, let's move it over.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 11:11:56 +00:00
Blue Swirl
1213406bf8 g364fb: compile in hwlib
Compile g364fb in hwlib. Two compilations less for the full build.

Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 14:46:12 +00:00
Alexander Graf
461d13d31c config: move ide core and pci to pci.mak
Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17 16:11:02 +01:00
Paul Brook
f8f5cfbaa4 PCI config include
Split PCI config options into a separate file

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Blue Swirl
08af49da7e piix4: compile only once
Compile piix4 in hwlib. Two compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:49:47 +00:00
Blue Swirl
4556bd8b25 Compile dma only once
Use a qemu_irq to request CPU exit.

7 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 08:00:52 +00:00
Blue Swirl
956a3e6bb7 Compile pckbd only once
Use a qemu_irq to indicate A20 line changes. Move I/O port 92
to pckbd.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 07:59:01 +00:00
Blue Swirl
c69ea0dff2 Compile acpi_piix4, apm and pm_smbus only once
12 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17 19:32:37 +00:00
Blue Swirl
3d08ff698b Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:56 +00:00
Blue Swirl
53b67b3052 Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.

Avoid using kvm.h, which uses CPUState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl
57448a975e Compile vmware_vga only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 18:18:17 +00:00
Blue Swirl
b970ea8f8d Compile some MIPS devices only once
Move CPU specific declarations to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 07:26:16 +00:00
Blue Swirl
f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Alexander Graf
b305b9d7d6 target-s390: Don't compile in virtio-pci
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic
gets confused and tries to give us PCI devices instead of S390 virtio devices.

Since we don't have PCI on S390, we can safely not compile virtio-pci at all.

In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I
enabled for every platform except S390. Thanks to this the change should be a
complete nop for every other platform.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 23:41:10 +01:00
Blue Swirl
70615c38de Compile sound devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:40 +00:00
Blue Swirl
2d48377a85 Compile serial only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:11 +00:00
Blue Swirl
d3ffc7a6e7 Compile ne2000_isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:10 +00:00
Blue Swirl
35da37e141 Compile fdc only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:06 +00:00
Blue Swirl
9953b2fc28 Compile most IDE devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:05 +00:00
Blue Swirl
4c65f1e5ba Compile usb-uhci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:04 +00:00
Blue Swirl
7f55c7ced6 Compile vga-isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:03 +00:00
Blue Swirl
7109371158 Compile pcspk only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl
df6327780d Compile i8254 only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl
b994504610 Compile parallel only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:01 +00:00
Blue Swirl
1afdfddc41 Compile vga-pci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:00 +00:00
Juan Quintela
9f376df1b2 Only compile esp when one target uses it
Patchworks-ID: 35206
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:12 -05:00
Juan Quintela
185c66c81d Only compile isa_mmio when one target uses it
Patchworks-ID: 35200
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:11 -05:00
Juan Quintela
1f3d3c8fd7 Add new config-devices.mak for each target
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.

Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:10 -05:00