This patch adds 'memory' support to qapi and also switches over
the memory chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'pipe' support to qapi and also switches over the
pipe chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'console' support to qapi and also switches over the
console chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch switches over the pty chardev initialization
to the new qapi code path.
Bonus: Taking QemuOpts out of the loop allows some nice
cleanups along the way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'stdio' support to qapi and also switches over the
stdio chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch add support for a new way to initialize chardev devices.
Instead of calling a initialization function with a QemuOpts we will
now create a (qapi) ChardevBackend, optionally call a function to
fill ChardevBackend from QemuOpts, then go create the chardev using
the new qapi code path which is also used by chardev-add.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adds ramblocks' names to their backing files when using -mem-path. Eases
introspection and debugging.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Message-id: 1362423265-15855-1-git-send-email-peter@gridcentric.ca
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch allows to specify multiple directories where qemu should look
for data files. To implement that the behavior of the -L switch is
slightly different now: Instead of replacing the data directory the
path specified will be appended to the data directory list. So when
specifiying -L multiple times all directories specified will be checked,
in the order they are specified on the command line, instead of just the
last one.
Additionally the default paths are always appended to the directory
data list. This allows to specify a incomplete directory (such as the
seabios out/ directory) via -L. Anything not found there will be loaded
from the default paths, so you don't have to create a symlink farm for
all the rom blobs.
For trouble-shooting a tracepoint has been added, logging which blob
has been loaded from which location.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1362739344-8068-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets with softmmu.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using
echo "1" > /sysfs/class/misc/tpm0/device/cancel
This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based of off version 9 of Stefan Berger's patch series
"QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.
This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).
This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].
Usage example:
qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
-device tpm-tis,tpmdev=tpm0 \
-cdrom test.iso -boot d
Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.
Regards,
Andreas Niederl, Stefan Berger
[1] http://trustedjava.sourceforge.net/
Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch uses the possibility to add a vendor-specific register and
adds a debug register useful for dumping the TIS's internal state. This
register is only active in a debug build (#define DEBUG_TIS).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-4-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to QEMU. The code is largely based on the previous implementation
for Xen but has been significantly extended to meet the standard's
requirements, such as the support for changing of localities and all the
functionality of the available flags.
Communication with the backend (i.e., for Xen or the libtpms-based one)
is cleanly separated through an interface which the backend driver needs
to implement.
Whenever the frontend has collected a complete packet, it will submit
a task to the backend, which then starts processing the command. Once
the result has been returned, the backend invokes a callback function
(tpm_tis_receive_cb()).
Testing the proper functioning of the different flags and localities
cannot be done from user space when running in Linux for example, since
access to the address space of the TPM TIS interface is not possible. Also
the Linux driver itself does not exercise all functionality. So, for
testing there is a fairly extensive test suite as part of the SeaBIOS patches
since from within the BIOS one can have full access to all the TPM's registers.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-3-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does now
proper handling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add a vmstate_lm32_cpu referencing the previous VMStateDescription as a
sub-struct and hook it up to CPUClass::vmsd. Drop cpu_{save,load}().
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enable ARMCPUInfo to specify a custom class_init functions.
Introduce arm_v7m_class_init() and use it for "cortex-m3" model.
Instead of forwarding from arm_cpu_do_interrupt() to do_interrupt_v7m(),
override CPUClass::do_interrupt with arm_v7m_cpu_do_interrupt()
in arm_v7m_class_init().
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reindent, add missing braces and drop/adjust whitespace.
Prepares for CPUArchState-to-CPUState field movements in
cpu_cris_handle_mmu_fault(), do_interruptv10() and do_interrupt().
The remaining functions were so minor that they can be fixed in one go.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This setter avoids redefining each VMStateDescription value to
vmstate_dummy by not referencing the value for CONFIG_USER_ONLY.
Suggested-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instance_id instead of -1.
Therefore add a CPU-specific CPUClass::vmsd field.
Unlike the legacy CPUArchState registration, rather register CPUState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
This avoids adding a duplicate stub for CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive
class lookup.
List CPUs by iterating over TYPE_SUPERH_CPU subclasses.
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, just less usages of first_cpu and next_cpu fields.
env is passed to cpu_memory_rw_debug(), which in turn passes it to
target-specific cpu_get_phys_page_debug(). Changing both would be a
larger refactoring, so defer that by using env_ptr for now.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, just a reduction of CPU loops.
The mon_cpu field is left untouched for now since changing that requires
a number of larger prerequisites, including cpu_synchronize_state() and
mon_get_cpu().
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 55e5c2850 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by returning CPU only if env is not NULL, otherwise CPU is
not found and function should return NULL.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hosts hold on to handles provided by guest-file-open for periods that can
span beyond the life of the qemu-ga process that issued them. Since these
are issued starting from 0 on every restart, we run the risk of issuing
duplicate handles after restarts/reboots.
As a result, users with a stale copy of these handles may end up
reading/writing corrupted data due to their existing handles effectively
being re-assigned to an unexpected file or offset.
We unfortunately do not issue handles as strings, but as integers, so a
solution such as using UUIDs can't be implemented without introducing a
new interface.
As a workaround, we fix this by implementing a persistent key-value store
that will be used to track the value of the last handle that was issued
across restarts/reboots to avoid issuing duplicates.
The store is automatically written to the same directory we currently
set via --statedir to track fsfreeze state, and so should be applicable
for stable releases where this flag is supported.
A follow-up can use this same store for handling fsfreeze state, but
that change is cosmetic and left out for now.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
* fixed guest_file_handle_add() return value from uint64_t to int64_t
We currently maintain a whitelist of commands that are safe during
fsfreeze. During fsfreeze, we disable all commands that aren't part of
that whitelist.
guest-sync-delimited meets the criteria for being whitelisted, and is
also required for qemu-ga clients that rely on guest-sync-delimited for
re-syncing the channel after a timeout.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
