Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL functions such that a return code is propagated
back to the main IPL calling function (rather than terminating immediately),
which facilitates possible error recovery in the future.
A select few panics remain, which indicate fatal non-devices errors that must
result in termination.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-13-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from Netboot specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-12-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from DASD IPL specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-11-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from virtio-scsi IPL specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-10-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from ECKD block device IPL specific functions so that
error recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-9-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL ISO El Torito specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-8-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the information about the separate s390-netboot.img from
the documentation.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-7-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the netboot code has been merged into the main s390-ccw.img,
it also does not make sense to keep the build rules in a separate
file. Thus let's merge netboot.mak into the main Makefile.
Message-Id: <20240621082422.136217-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We originally built a separate binary for the netboot code since it
was considered as experimental and we could not be sure that the
necessary SLOF module had been checked out. Time passed, the code
proved its usefulness, and the build system nowadays makes sure that
the SLOF module is checked out if you have a s390x compiler available
for building the s390-ccw bios. So there is no real compelling reason
anymore to keep the netboot code in a separate binary. Linking the
code together with the main s390-ccw.img will make future enhancements
much easier, like supporting more than one boot device.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-4-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are already using the libc from SLOF for the s390-netboot.img, and
this libc implementation is way more complete and accurate than the
simple implementation that we currently use for the s390-ccw.img binary.
Since we are now always assuming that the SLOF submodule is available
when building the s390-ccw bios (see commit bf6903f694), we can drop
the simple implementation and use the SLOF libc for the s390-ccw.img
binary, too.
Additionally replace sclp_print calls with puts/printf now that it is
available.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-3-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Current definition yields a negative 32bits value, messing up hwprobe
result when Zvfhmin extension presents. Replace it by using a 1ULL bit
shift value as done in kernel upstream.
Link: 5ea6764d90
Fixes: a3432cf227 ("linux-user/riscv: Sync hwprobe keys with Linux")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yao Zi <ziyao@disroot.org>
Message-ID: <20241022160136.21714-2-ziyao@disroot.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 9651cead2f ("linux-user: add openat2 support in linux-user")
ships a definition of struct open_how_ver0 while assuming type __u64 is
available in code, which is not the case when building QEMU on musl.
Let's replaces __u64 with uint64_t.
Fixes: 9651cead2f ("linux-user: add openat2 support in linux-user")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20241022122929.17465-2-ziyao@disroot.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a function for formatting target sigsets. It can be useful for
other syscalls in the future, so put it into the beginning of strace.c.
For simplicity, do not implement the strace's ~[] output syntax.
Add a rt_sigprocmask return handler.
Example outputs:
753914 rt_sigprocmask(SIG_BLOCK,[SIGCHLD SIGTSTP SIGTTIN SIGTTOU],0x00007f80fddfe380,8) = 0 (oldset=[SIGTTOU])
753914 rt_sigprocmask(SIG_SETMASK,[SIGCHLD],NULL,8) = 0
753914 rt_sigprocmask(SIG_BLOCK,NULL,0x00007f80fddff3c0,8) = 0 (oldset=[])
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241022102726.18520-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_setcontext() copies the target sigmask without endianness handling
and then uses target_to_host_sigset_internal(), which expects a
byte-swapped one. Use target_to_host_sigset() instead.
Fixes: bcd4933a23 ("linux-user: ppc signal handling")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241017125811.447961-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If one thread modifies the mappings and another thread prints them,
a situation may occur that the printer thread sees a guest mapping
without a corresponding host mapping, leading to a crash in
open_self_maps_2().
Cc: qemu-stable@nongnu.org
Fixes: 7b7a3366e1 ("linux-user: Use walk_memory_regions for open_self_maps")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241014203441.387560-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This argument is no longer used.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241013184733.1423747-4-richard.henderson@linaro.org>
The probe_access_full_mmu function was designed for this purpose,
and does not report the memory operation event to plugins.
Cc: qemu-stable@nongnu.org
Fixes: 6d03226b42 ("plugins: force slow path when plugins instrument memory ops")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241013184733.1423747-3-richard.henderson@linaro.org>
When translating virtual to physical address with a guest CPU that
supports nested paging (NPT), we need to perform every page table walk
access indirectly through the NPT, which we correctly do.
However, we treat real mode (no page table walk) special: In that case,
we currently just skip any walks and translate VA -> PA. With NPT
enabled, we also need to then perform NPT walk to do GVA -> GPA -> HPA
which we fail to do so far.
The net result of that is that TCG VMs with NPT enabled that execute
real mode code (like SeaBIOS) end up with GPA==HPA mappings which means
the guest accesses host code and data. This typically shows as failure
to boot guests.
This patch changes the page walk logic for NPT enabled guests so that we
always perform a GVA -> GPA translation and then skip any logic that
requires an actual PTE.
That way, all remaining logic to walk the NPT stays and we successfully
walk the NPT in real mode.
Cc: qemu-stable@nongnu.org
Fixes: fe441054bb ("target-i386: Add NPT support")
Signed-off-by: Alexander Graf <graf@amazon.com>
Reported-by: Eduard Vlad <evlad@amazon.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240921085712.28902-1-graf@amazon.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG IR sequence:
mov_i32 tmp97,$0xc4240000 dead: 1 pref=0xffffffff
mov_i32 tmp98,$0x0 pref=0xffffffff
rotr_i32 tmp97,tmp97,tmp98 dead: 1 2 pref=0xffffffff
was translated to `slwi r15, r14, 0` instead of `slwi r14, r14, 0`
due to SH field overflow. SH field is 5 bits, and tcg_out_rlw is called
in some situations with `32-n`, when `n` is 0 it results in an overflow
to RA field.
This commit prevents overflow of that field and adds debug assertions
for the other fields
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Dani Szebenyi <szedani@linux.ibm.com>
Message-ID: <20241022133535.69351-2-szedani@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use vrsub.vi to subtract from a constant.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend comparison results from mask registers to SEW-width elements,
following recommendations in The RISC-V SPEC Volume I (Version 20240411).
This aligns with TCG's cmp_vec behavior by expanding compare results to
full element width: all 1s for true, all 0s for false.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241007025700.47259-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The RISC-V vector instruction set utilizes the LMUL field to group
multiple registers, enabling variable-length vector registers. This
implementation uses only the first register number of each group while
reserving the other register numbers within the group.
In TCG, each VEC_IR can have 3 types (TCG_TYPE_V64/128/256), and the
host runtime needs to adjust LMUL based on the type to use different
register groups.
This presents challenges for TCG's register allocation. Currently, we
avoid modifying the register allocation part of TCG and only expose the
minimum number of vector registers.
For example, when the host vlen is 64 bits and type is TCG_TYPE_V256, with
LMUL equal to 4, we use 4 vector registers as one register group. We can
use a maximum of 8 register groups, but the V0 register number is reserved
as a mask register, so we can effectively use at most 7 register groups.
Moreover, when type is smaller than TCG_TYPE_V256, only 7 registers are
forced to be used. This is because TCG cannot yet dynamically constrain
registers with type; likewise, when the host vlen is 128 bits and
TCG_TYPE_V256, we can use at most 15 registers.
There is not much pressure on vector register allocation in TCG now, so
using 7 registers is feasible and will not have a major impact on code
generation.
This patch:
1. Reserves vector register 0 for use as a mask register.
2. When using register groups, reserves the additional registers within
each group.
Signed-off-by: Huang Shiyuan <swung0x48@outlook.com>
Co-authored-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241007025700.47259-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add support for probing RISC-V vector extension availability in
the backend. This information will be used when deciding whether
to use vector instructions in code generation.
Cache lg2(vlenb) for the backend. The storing of lg2(vlenb) means
we can convert all of the division into subtraction.
While the compiler doesn't support RISCV_HWPROBE_EXT_ZVE64X,
we use RISCV_HWPROBE_IMA_V instead. RISCV_HWPROBE_IMA_V is more
strictly constrainted than RISCV_HWPROBE_EXT_ZVE64X. At least in
current QEMU implemenation, the V vector extension depends on the
zve64d extension.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241007025700.47259-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first immediate field is unsigned, whereas operand_vimm
extracts a signed value. There is no need to mask the result
with 'u'; just print the immediate with 'i'.
Fixes: 07f4964d17 ("disas/riscv.c: rvv: Add disas support for vector instructions")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This pointer needs to be reset after overflow just like
code_buf and code_ptr.
Cc: qemu-stable@nongnu.org
Fixes: 57a269469d ("tcg: Infrastructure for managing constant pools")
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to link the SLOF libc into the s390-ccw.img, and this
libc needs more memory for providing space for malloc() and friends.
Thus bump the memory size that we reserve for the bios to 3 MiB
instead of only 2 MiB. While we're at it, add a proper check that
there is really enough memory assigned to the machine before blindly
using it.
Message-ID: <20240621082422.136217-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
s->offset and s->size are only set at the end of the function and still
contain the old values when formatting the error message. Print the
parameters with the new values that we actually checked instead.
Fixes: 500e243420 ('raw-format: Split raw_read_options()')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240829185527.47152-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BLOCK_IO_ERROR events comes from guest, so we must throttle them.
We still want per-device throttling, so let's use device id as a key.
Signed-off-by: Leonid Kaplan <xeor@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20241002151806.592469-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need something more reliable than "device" (which absent in modern
interfaces) and "node-name" (which may absent, and actually don't
specify the device, which is a source of error) to make a per-device
throttling for the event in the following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20241002151806.592469-2-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Relying on disk usage is bad thing, and test just doesn't work on XFS.
Let's instead add a dirty bitmap to track writes to test image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240620144402.65896-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make variable reusable in code for checks. Don't care to change "512 *
1024" invocations as they will be dropped in the next commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240620144402.65896-2-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the VDI SECTOR_SIZE define be a 64-bit constant; this matches
how we define BDRV_SECTOR_SIZE. The benefit is that it means that we
don't need to carefully cast to 64-bits when doing operations like
"n_sectors * SECTOR_SIZE" to avoid doing a 32x32->32 multiply, which
might overflow, and which Coverity and other static analysers tend to
warn about.
The specific potential overflow Coverity is highlighting is the one
at the end of vdi_co_pwritev() where we write out n_sectors sectors
to the block map. This is very unlikely to actually overflow, since
the block map has 4 bytes per block and the maximum number of blocks
in the image must fit into a 32-bit integer. So this commit is not
fixing a real-world bug.
An inspection of all the places currently using SECTOR_SIZE in the
file shows none which care about the change in its type, except for
one call to error_setg() which needs the format string adjusting.
Resolves: Coverity CID 1508076
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241008164708.2966400-5-peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 52b10c9c0c in 2023 the QAPI MapEntry struct was
updated to add a 'compressed' field. That commit updated a number
of iotest expected-output files, but missed 211, which is vdi
specific. The result is that
./check -vdi
and more specifically
./check -vdi 211
fails because the expected and actual output don't match.
Update the reference output.
Cc: qemu-stable@nongnu.org
Fixes: 52b10c9c0c ("qemu-img: map: report compressed data blocks")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241008164708.2966400-4-peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In compare_fingerprint() we effectively check whether the characters
in the fingerprint are valid hex digits twice: first we do so with
qemu_isxdigit(), but then the hex2decimal() function also has a code
path where it effectively detects an invalid digit and returns -1.
This causes Coverity to complain because it thinks that we might use
that -1 value in an expression where it would be an integer overflow.
Avoid the double-check of hex digit validity by testing the return
values from hex2decimal() rather than doing separate calls to
qemu_isxdigit().
Since this means we now use the illegal-character return value
from hex2decimal(), rewrite it from "-1" to "UINT_MAX", which
has the same effect since the return type is "unsigned" but
looks less confusing at the callsites when we detect it with
"c0 > 0xf".
Resolves: Coverity CID 1547813
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241008164708.2966400-3-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the loop in qemu_gluster_parse_json() we do:
char *str = NULL;
for(...) {
str = g_strdup_printf(...);
...
if (various errors) {
goto out;
}
...
g_free(str);
str = NULL;
}
return 0;
out:
various cleanups;
g_free(str);
...
return -errno;
Coverity correctly complains that the assignment "str = NULL" at the
end of the loop is unnecessary, because we will either go back to the
top of the loop and overwrite it, or else we will exit the loop and
then exit the function without ever reading str again. The assignment
is there as defensive coding to ensure that str is only non-NULL if
it's a live allocation, so this is intentional.
We can make Coverity happier and simplify the code here by using
g_autofree, since we never need 'str' outside the loop.
Resolves: Coverity CID 1527385
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241008164708.2966400-2-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
