On 32-bit hosts op_qemu_ld32s is unused. Remove it to fix the
following assertion failure:
qemu-alpha: tcg/tcg.c:1055:
tcg_add_target_add_op_defs: Assertion `tcg_op_defs[op].used' failed.
Signed-off-by: Jay Foad <jay.foad@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Previously ORC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Previously ANDC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The fallback implementation of "ret = arg1 ^ -1" isn't ideal
because of the extra tcg op to load the minus one.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The fallback implementation of "ret = 0 - arg1" isn't ideal,
first because of the extra tcg op to load the zero, and second
because we fail to handle zero as %g0 for arg1 of the sub.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
New version after malc's comments. (This avoids having to do
#if defined __linux__ || defined __FreeBSD__ || defined __FreeBSD_kernel__
for the third case.)
Submitted by: Andreas Tobler <andreast@fgznet.ch> (original version)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
When compiled with CONFIG_DEBUG_TCG, this code looks
for missing, duplicate and wrong entries in the
op definitions.
Errors will raise an assertion at program start
(all checks are done in the initial phase).
The current code contains such errors, at least for
i386 guest on i386 host.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Returns the condition as if with swapped comparison operands.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The address register is overriden when it corresponds to v0 and the fast
path is taken, which leads to a crash. Fix that by using the a0 register
instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are places, like brcond2, where we know that the destination
of a forward branch will be within 127 bytes.
Add the R_386_PC8 relocation type to support this. Add a flag to
tcg_out_jxx and tcg_out_brcond* to enable it. Set the flag in the
brcond2 label_next branches; pass along the input flag otherwise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It is very handy to have a reliable mapping of a condition to its inverse.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Defines setcond_{i32,i64} and setcond2_i32 for 64-on-32-bit.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The internal opcodes brcond2, add2, sub2, mulu2 were undocumented.
Place these in a new section that clearly indicates that they are
not to be emitted by translators.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing P_REXB internal opcode flag unconditionally emits
the REX prefix. Technically it's not needed if the register in
question is %al, %bl, %cl, %dl.
Eliding the prefix requires splitting the P_REXB flag into two,
in order to indicate whether the byte register in question is
in the REG or the R/M field. Within TCG, the byte register is
in the REG field only for stores.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This avoids an unnecessary REX.W prefix when dealing with AND
operands that fit into a 32-bit quantity. The most common change
actually seen is movz[wb]q -> movz[wb]l.
Similarly, avoid REXW in ext{8,16}u_i64 tcg opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The 32-bit right-shift instructions is defined to extend the shifted
output to 64-bits. A shift count of zero therefore is a simple
extension without actually shifting.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The {div,divu}2 opcodes are intended for systems for which the
division instruction produces both quotient and remainder. Sparc
is not such a system. Indeed, the remainder must be computed as
quot = a / b
rem = a - (quot * b)
Split out a tcg_out_div32 function that properly initializes Y
with the extension of the input to 64-bits. Discard the code
that used the 64-bit DIVX on sparc9/sparcv8plus without extending
the inputs to 64-bits. Implement remainders in terms of division
followed by multiplication.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[blauwirbel@gmail.com: applied rth's typo fix in tcg_out_div32]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a function to handle the register-vs-immediate test for arithmetic.
Also, adjust the OP_32_64 macro so that it auto-indents properly.
Rename the gen_arith32 label to gen_arith, since it handles 64-bit
arithmetic as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Returns an unsigned version of a signed condition;
returns the original condition otherwise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out tcg_out_cmp and properly handle immediate arguments.
Fix constraints on brcond to match what SUBCC accepts.
Add tcg_out_brcond2_i32 for 32-bit host.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The test TCG_TARGET_REG_BITS==64 is exactly the feature that we
are checking for, whereas something involving __sparc_v9__ or
__sparc_v8plus__ should be reserved for something ISA related,
as with SMULX.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Generate sign-extended 32-bit constants with SETHI+XOR.
Otherwise tidy the routine to avoid the need for
conditional compilation and code duplication with movi_imm32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We were unnecessarily restricting imm13 constants to 12 bits.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Qemu won't let us run a KVM target without having host TCG support. Well, for
now we don't have any so let's implement a fake target that only stubs out
everything.
I tried to keep the patch as close to Uli's source as possible, so whenever
he feels like it he can easily diff his version against this one.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
A few words about design choices:
* Two registers, at and t0, are reserved for TCG internal use. They are
useful for bswap and 64-bit ops.
* Most ops supports a constant argument with value 0, which is actually
mapped to the zero register.
* While the at register is available for constant loading, ops only
support a limited range of constants. TCG does a better job doing the
register allocation and constant loading by itself. There are plenty of
registers available anyway.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
