and if we have failures we call xen_pt_destroy introduced in
'xen/pt: Move bulk of xen_pt_unregister_device in its own routine.'
and free all of the allocated structures.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This way we can call it if we fail during init.
This code movement introduces no changes.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To deal with xen_host_pci_[set|get]_ functions returning error values
and clearing ourselves in the init function we should make the
.exit (xen_pt_unregister_device) function be idempotent in case
the generic code starts calling .exit (or for fun does it before
calling .init!).
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We seem to only use these functions when de-activating the
MSI - so just log errors.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To help with troubleshooting in the field.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We do not want to have two entries to cache the guest configuration
registers: XenPTReg->data and dev.config. Instead we want to use
only the dev.config.
To do without much complications we rip out the ->data field
and replace it with an pointer to the dev.config. This way we
have the type-checking (uint8_t, uint16_t, etc) and as well
and pre-computed location.
Alternatively we could compute the offset in dev.config by
using the XenPTRRegInfo and XenPTRegGroup every time but
this way we have the pre-computed values.
This change also exposes some mis-use:
- In 'xen_pt_status_reg_init' we used u32 for the Capabilities Pointer
register, but said register is an an u16.
- In 'xen_pt_msgdata_reg_write' we used u32 but should have only use u16.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
It should never happen, but in case it does (an developer adds
a new register and the 'init_val' expands past the register
size) we want to report. The code will only write up to
reg->size so there is no runtime danger of the register spilling
across other ones - however to catch this sort of thing
we still return an error.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
For a passthrough device we maintain a state of emulated
registers value contained within d->config. We also consult
the host registers (and apply ro and write masks) whenever
the guest access the registers. This is done in xen_pt_pci_write_config
and xen_pt_pci_read_config.
Also in this picture we call pci_default_write_config which
updates the d->config and if the d->config[PCI_COMMAND] register
has PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) acts on those changes.
On startup the d->config[PCI_COMMAND] are the host values, not
what the guest initial values should be, which is exactly what
we do _not_ want to do for 64-bit BARs when the guest just wants
to read the size of the BAR. Huh you say?
To get the size of 64-bit memory space BARs, the guest has
to calculate ((BAR[x] & 0xFFFFFFF0) + ((BAR[x+1] & 0xFFFFFFFF) << 32))
which means it has to do two writes of ~0 to BARx and BARx+1.
prior to this patch and with XSA120-addendum patch (Linux kernel)
the PCI_COMMAND register is copied from the host it can have
PCI_COMMAND_MEMORY bit set which means that QEMU will try to
update the hypervisor's P2M with BARx+1 value to ~0 (0xffffffff)
(to sync the guest state to host) instead of just having
xen_pt_pci_write_config and xen_pt_bar_reg_write apply the
proper masks and return the size to the guest.
To thwart this, this patch syncs up the host values with the
guest values taking into account the emu_mask (bit set means
we emulate, PCI_COMMAND_MEMORY and PCI_COMMAND_IO are set).
That is we copy the host values - masking out any bits which
we will emulate. Then merge it with the initial emulation register
values. Lastly this value is then copied both in
dev.config _and_ XenPTReg->data field.
There is also reg->size accounting taken into consideration
that ends up being used in patch.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
This fixes errors such as these:
(XEN) memory_map:add: dom2 gfn=fffe0 mfn=fbce0 nr=20
(DEBUG) 189 pci dev 04:0 BAR16 wrote ~0.
(DEBUG) 200 pci dev 04:0 BAR16 read 0x0fffe0004.
(XEN) memory_map:remove: dom2 gfn=fffe0 mfn=fbce0 nr=20
(DEBUG) 204 pci dev 04:0 BAR16 wrote 0x0fffe0004.
(DEBUG) 217 pci dev 04:0 BAR16 read upper 0x000000000.
(XEN) memory_map:add: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20
(XEN) p2m.c:883:d0v0 p2m_set_entry failed! mfn=ffffffffffffffff rc:-22
(XEN) memory_map:fail: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 ret:-22
(XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20
(XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00000 type:4
(XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00001 type:4
..
(XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff]
(DEBUG) 222 pci dev 04:0 BAR16 read upper 0x0ffffffff.
(XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20
(XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff]
[The DEBUG is to illustate what the hvmloader was doing]
Also we swap from xen_host_pci_long to using xen_host_pci_get_[byte,word,long].
Otherwise we get:
xen_pt_config_reg_init: Offset 0x0004 mismatch! Emulated=0x0000, host=0x2300017, syncing to 0x2300014.
xen_pt_config_reg_init: Error: Offset 0x0004:0x2300014 expands past register size(2)!
which is not surprising. We read the value as an 32-bit (from host),
then operate it as a 16-bit - and the remainder is left unchanged.
We end up writing the value as 16-bit (so 0014) to dev.config
(as we use proper xen_set_host_[byte,word,long] so we don't spill
to other registers) but in XenPTReg->data it is as 32-bit (0x2300014)!
It is harmless as the read/write functions end up using an size mask
and never modify the bits past 16-bit (reg->size is 2).
This patch fixes the warnings by reading the value using the
proper size.
Note that the check for size is still left in-case the developer
sets bits past the reg->size in the ->init routines. The author
tried to fiddle with QEMU_BUILD_BUG to make this work but failed.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
During init time we treat the dev.config area as a cache
of the host view. However during execution time we treat it
as guest view (by the generic PCI API). We need to sync Xen's
code to the generic PCI API view. This is the first step
by replacing all of the code that uses dev.config or
pci_get_[byte|word] to get host value to actually use the
xen_host_pci_get_[byte|word] functions.
Interestingly in 'xen_pt_ptr_reg_init' we also needed to swap
reg_field from uint32_t to uint8_t - since the access is only
for one byte not four bytes. We can split this as a seperate
patch however we would have to use a cast to thwart compiler
warnings in the meantime.
We also truncated 'flags' to 'flag' to make the code fit within
the 80 characters.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bjta
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-10' into staging
error: On abort, report where the error was created
# gpg: Signature made Thu 10 Sep 2015 13:01:39 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-09-10:
error: On abort, report where the error was created
error: Revamp interface documentation
error: error_set_errno() is unused, drop
qga/vss-win32: Document the DLL requires non-null errp
qga: Clean up unnecessarily dirty casts
error: Make error_setg() a function
error: De-duplicate code creating Error objects
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If XEN_PT_LOGGING_ENABLED is enabled the XEN_PT_LOG macros start
using the first argument. Which means if within the function there
is only one user of the argument ('d') and XEN_PT_LOGGING_ENABLED
is not set, we get compiler warnings. This is not the case now
but with the "xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config"
we will hit - so this sync up the function to the rest of them.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We would like to know what the MSI register value is to help
in troubleshooting in the field. As such modify the logging
logic to include such details in xen_pt_msgctrl_reg_write.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
However the init routines assume that on errors the return
code is -1 (as the libxc API is) - while those xen_host_* routines follow
another paradigm - negative errno on return, 0 on success.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
As we do not use it outside our code.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
It has changed but the comments still refer to the old names.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
.errors - as it will most likely have the proper error value.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The OpRegion shouldn't be mapped 1:1 because the address in the host
can't be used in the guest directly.
This patch traps read and write access to the opregion of the Intel
GPU config space (offset 0xfc).
The original patch is from Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently we just register this isa bridge when we use IGD
passthrough in Xen side.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently IGD drivers always need to access PCH by 1f.0. But we
don't want to poke that directly to get ID, and although in real
world different GPU should have different PCH. But actually the
different PCH DIDs likely map to different PCH SKUs. We do the
same thing for the GPU. For PCH, the different SKUs are going to
be all the same silicon design and implementation, just different
features turn on and off with fuses. The SW interfaces should be
consistent across all SKUs in a given family (eg LPT). But just
same features may not be supported.
Most of these different PCH features probably don't matter to the
Gfx driver, but obviously any difference in display port connections
will so it should be fine with any PCH in case of passthrough.
So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
scenarios, 0x9cc3 for BDW(Broadwell).
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Now we retrieve VGA bios like kvm stuff in qemu but we need to
fix Device Identification in case if its not matched with the
real IGD device since Seabios is always trying to compare this
ID to work out VGA BIOS.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
[Replace pread with lseek and read to fix Windows build]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This is particularly useful when we abort in error_propagate(),
because there the stack backtrace doesn't lead to where the error was
created. Looks like this:
Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322:
qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action
Aborted (core dumped)
Note: to get this example output, I monkey-patched drive_new() to pass
&error_abort to blockdev_init().
To keep the error handling boiler plate from growing even more, all
error_setFOO() become macros expanding into error_setFOO_internal()
with additional __FILE__, __LINE__, __func__ arguments. Not exactly
pretty, but it works.
The macro trickery breaks down when you take the address of an
error_setFOO(). Fortunately, we do that in just one place: qemu-ga's
Windows VSS provider and requester DLL wants to call
error_setg_win32() through a function pointer "to avoid linking glib
to the DLL". Use error_setg_win32_internal() there. The use of the
function pointer is already wrapped in a macro, so the churn isn't
bad.
Code size increases by some 35KiB for me (0.7%). Tolerable. Could be
less if we passed relative rather than absolute source file names to
the compiler, or forwent reporting __func__.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
requester.cpp uses this pattern to receive an error and pass it on to
the caller (err_is_set() macro peeled off for clarity):
... code that may set errset->errp ...
if (errset->errp && *errset->errp) {
... handle error ...
}
This breaks when errset->errp is null. As far as I can tell, it
currently isn't, so this is merely fragile, not actually broken.
The robust way to do this is to receive the error in a local variable,
then propagate it up, like this:
Error *err = NULL;
... code that may set err ...
if (err)
... handle error ...
error_propagate(errset->errp, err);
}
See also commit 5e54769, 0f230bf, a903f40.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qga_vss_fsfreeze() casts error_set_win32() from
void (*)(Error **, int, ErrorClass, const char *, ...)
to
void (*)(void **, int, int, const char *, ...)
The result is later called. Since the two types are not compatible,
the call is undefined behavior. It works in practice anyway.
However, there's no real need for trickery here. Clean it up as
follows:
* Declare struct Error, and fix the first parameter.
* Switch to error_setg_win32(). This gets rid of the troublesome
ErrorClass parameter. Requires converting error_setg_win32() from
macro to function, but that's trivially easy, because this is the
only user of error_set_win32().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Duplicated when commit 680d16d added error_set_errno(), and again when
commit 20840d4 added error_set_win32().
Make the original copy in error_set() reusable by factoring out
error_setv(), then rewrite error_set_errno() and error_set_win32() on
top of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV8UpiAAoJECgfDbjSjVRp3RUH/AuDtZqyRoQuvK+Ec3faN5sk
LWChCpaVe+UqoIUT3gC6SnIpJrbJu8Kd9SppiQQALyDZctJZ+UbQ8EhcUdi+nZz6
ZLjMog5GO246O5NA7LeBJu/099IACRAMdv/upG1liJ9e6O1jtkOwl+y9/845hibG
XDfwPQL9YCpBbQTH/R7/wxUW1yYqEPDr/gMDumB2YDn5Zvz7PGE8+In004nQkbxF
RTQN3ZbnvM3u0Iup4sbhxN9GiquwTepUPTBeTjoKwLEivi+hXjR12JputBL5d5pd
Fb9O+0xJOdFdm1DI+W+KnIOVPGX9mNBY93NHiIwWbIa34iAyWcQStL2Y4lHeNDY=
=9CYg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi fixes, cleanups
Fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 10 Sep 2015 10:16:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/pci: fix pci_update_mappings() trace events
pc: memhotplug: keep reserved-memory-end broken on 2.4 and earlier machines
pc: memhotplug: fix incorrectly set reserved-memory-end
acpi: Remove unused definition.
virtio: avoid leading underscores for helpers
pc: Remove redundant arguments from xen_hvm_init()
pci: Fix pci_device_iommu_address_space() bus propagation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20
The slot and function values are in reverse order.
Stick with the conventional BDF notation.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will prevent guests on old machines from seeing
inconsistent memory mapping in firmware/ACPI views.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
reserved-memory-end tells firmware address from which
it could start treating memory as PCI address space
and map PCI BARs after it to avoid collisions with
RAM.
Currently it is incorrectly pointing to address where
hotplugged memory range starts which could redirect
hotplugged RAM accesses to PCI BARs when firmware
maps them over RAM or viceverse.
Fix this by pointing reserved-memory-end to the end
of memory hotplug area.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
he current code walks up the bus tree for an iommu, however it passes
to the iommu_fn() callback the bus/devfn of the immediate child of
the level where the callback was found, rather than the original
bus/devfn where the search started from.
This prevents iommu's like POWER8 (and in fact also Q35) to properly
provide an address space for a subset of devices that aren't immediate
children of the iommu.
PCIe carries the originator bdfn acccross to the iommu on all DMA
transactions, so we must be able to properly identify devices at all
levels.
This changes the function pci_device_iommu_address_space() to pass
the original pointers to the iommu_fn() callback instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux returns 0 if no conversion was made, while OS X and presumably
the BSDs return EINVAL. The OS X convention rejects more invalid
inputs, so convert to it and adjust the test case.
Windows returns 1 from strtoul and strtoull (instead of -1) for
negative out-of-range input; fix it up.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tb_lock has to be taken inside the mmap_lock (example:
tb_invalidate_phys_range is called by target_mmap), but
tb_link_page is taking the mmap_lock and it is called
with the tb_lock held.
To fix this, take the mmap_lock in tb_find_slow, not
in tb_link_page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is some iffy lock hierarchy going on in translate-all.c. To
fix it, we need to take the mmap_lock in cpu-exec.c. Make the
functions globally available.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
page_find is reading the radix tree outside all locks, so it has to
use the RCU primitives. It does not need RCU critical sections
because the PageDescs are never removed, so there is never a need
to wait for the end of code sections that use a PageDesc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This just removes spinlock as it is not used anymore.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-6-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This hides the tcg_halt_cond and tcg_cpu_thread global variables
inside qemu_tcg_init_vcpu. Multi-threaded TCG will need one
QemuCond and one QemuThread per virtual cpu, so it's preferrable
to use cpu->halt_cond and cpu->thread.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-9-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protect the list of queued work items with something other than
the BQL, as a preparation for running the work items outside it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
