When using the 9P2000.u version of the protocol, the following shell
command line in the guest can cause QEMU to crash:
while true; do rm -rf aa; mkdir -p a/b & touch a/b/c & mv a aa; done
With 9P2000.u, file renaming is handled by the WSTAT command. The
v9fs_wstat() function calls v9fs_complete_rename(), which calls
v9fs_fix_path() for every fid whose path is affected by the change.
The involved calls to v9fs_path_copy() may race with any other access
to the fid path performed by some worker thread, causing a crash like
shown below:
Thread 12 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555a25da2 in local_open_nofollow (fs_ctx=0x555557d958b8, path=0x0,
flags=65536, mode=0) at hw/9pfs/9p-local.c:59
59 while (*path && fd != -1) {
(gdb) bt
#0 0x0000555555a25da2 in local_open_nofollow (fs_ctx=0x555557d958b8,
path=0x0, flags=65536, mode=0) at hw/9pfs/9p-local.c:59
#1 0x0000555555a25e0c in local_opendir_nofollow (fs_ctx=0x555557d958b8,
path=0x0) at hw/9pfs/9p-local.c:92
#2 0x0000555555a261b8 in local_lstat (fs_ctx=0x555557d958b8,
fs_path=0x555556b56858, stbuf=0x7fff84830ef0) at hw/9pfs/9p-local.c:185
#3 0x0000555555a2b367 in v9fs_co_lstat (pdu=0x555557d97498,
path=0x555556b56858, stbuf=0x7fff84830ef0) at hw/9pfs/cofile.c:53
#4 0x0000555555a1e9e2 in v9fs_stat (opaque=0x555557d97498)
at hw/9pfs/9p.c:1083
#5 0x0000555555e060a2 in coroutine_trampoline (i0=-669165424, i1=32767)
at util/coroutine-ucontext.c:116
#6 0x00007fffef4f5600 in __start_context () at /lib64/libc.so.6
#7 0x0000000000000000 in ()
(gdb)
The fix is to take the path write lock when calling v9fs_complete_rename(),
like in v9fs_rename().
Impact: DoS triggered by unprivileged guest users.
Fixes: CVE-2018-19489
Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
When the submission and completion queues are being torn down
the IRQ will be asserted for the completion queue when the
submsission queue is deleted. Then when the completion queue
is deleted it stays asserted. Thus, on systems that do
not use MSI, no further interrupts can be triggered on the host.
Linux sees this as a long delay when unbinding the nvme device.
Eventually the interrupt timeout occurs and it continues.
To fix this we ensure we deassert the IRQ for a CQ when it is
deleted.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The CMB is marked as DEVICE_LITTLE_ENDIAN, so the data must be
read/written as if it was little-endian output (in the case of
big endian, we get two swaps, one in the memory core and one
in nvme.c).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the CMB BAR has a min_access_size of 2, if you read the last
byte it will try to memcpy *2* bytes from n->cmbuf, causing an off-by-one
error. This is CVE-2018-16847.
Another way to fix this might be to register the CMB as a RAM memory
region, which would also be more efficient. However, that might be a
change for big-endian machines; I didn't think this through and I don't
know how real hardware works. Add a basic testcase for the CMB in case
somebody does this change later on.
Cc: Keith Busch <keith.busch@intel.com>
Cc: qemu-block@nongnu.org
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When blk_flush called in NVMe reset path S/C queues are already freed
which means that re-entering AIO handling loop having some IO requests
unfinished will lockup or crash as their SG structures being potentially
reused. Call blk_drain before freeing the queues to avoid this nasty
scenario.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 40dce4ee6 "scsi-disk: fix rerror/werror=ignore" introduced a
bug which causes qemu to crash with the assertion error below if the
host file or disk returns an error:
qemu-system-x86_64: hw/scsi/scsi-bus.c:1374: scsi_req_complete:
Assertion `req->status == -1' failed.
Kevin Wolf suggested this fix:
< kwolf> Hm, should the final return false; in that patch
actually be a return true?
< kwolf> Because I think he didn't intend to change anything
except BLOCK_ERROR_ACTION_IGNORE
Buglink: https://bugs.launchpad.net/qemu/+bug/1804323
Fixes: 40dce4ee61
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have a couple of PC_COMPAT_3_0, so we should have 3.1 PC machines,
and update the 3.0 machines to make use of those.
Fixes a "Known issue" from https://wiki.qemu.org/Planning/3.1.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181120132604.22854-1-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Recent commit 5b76ef50f6 fixed a race where v9fs_co_open2() could
possibly overwrite a fid path with v9fs_path_copy() while it is being
accessed by some other thread, ie, use-after-free that can be detected
by ASAN with a custom 9p client.
It turns out that the same can happen at several locations where
v9fs_path_copy() is used to set the fid path. The fix is again to
take the write lock.
Fixes CVE-2018-19364.
Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Update the onenand device to use qemu_log_mask() for reporting
guest errors and unimplemented features, rather than plain
fprintf() and hw_error().
(We leave the hw_error() in onenand_reset(), as that is
triggered by a failure to read the underlying block device
for the bootRAM, not by guest action.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181115143535.5885-3-peter.maydell@linaro.org
An off-by-one error in a switch case in onenand_read() allowed
a misbehaving guest to read off the end of a block of memory.
NB: the onenand device is used only by the "n800" and "n810"
machines, which are usable only with TCG, not KVM, so this is
not a security issue.
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181115143535.5885-2-peter.maydell@linaro.org
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The UART and timer devices for the stm32f205 were being created
with memory regions that were too large. Use the size specified
in the chip datasheet.
The old sizes were so large that the devices would overlap with
each other in the SoC memory map, so this fixes a bug that
caused odd behavior and/or crashes when trying to set up multiple
UARTs.
Signed-off-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rephrased commit message to follow our usual standard]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit c8a35f1cf0 "fdc: use IsaDma interface instead of global DMA_*
functions" accidentally introduced a segfault in fdctrl_stop_transfer() for
non-DMA transfers.
If fdctrl->dma_chann has not been configured then the fdctrl->dma interface
reference isn't initialised during isabus_fdc_realize(). Unfortunately
fdctrl_stop_transfer() unconditionally references the DMA interface when
finishing the transfer causing a NULL pointer dereference.
Fix the issue by adding a check in fdctrl_stop_transfer() so that the DMA
interface reference and release method is only invoked if fdctrl->dma_chann
has been set.
(This issue was discovered by Martin testing a recent change in the NetBSD
installer under qemu-system-sparc)
Cc: qemu-stable@nongnu.org
Reported-by: Martin Husemann <martin@duskware.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the nvme_cmb_ops mr doesn't check the addr and size.
This can lead an oob access issue. This is triggerable in the guest.
Add check to avoid this issue.
Fixes CVE-2018-16847.
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pull request contains four patches that aren't really related to
each other aside from all being bug fixes that I think should go in for
3.1.0:
* The second half of Alistair's memory leak patch set that I missed last
week.
* A fix to make fclass.d availiable only on RV64IFD systems (without
this it's availiable on RV32IFD systems, truncating the result).
* A fix to make sfence.vm availiable only in priv-1.9.1, and sfence.vma
only availiable in priv-1.10.
* A change to respect fences in user-mode emulators, which were
previously treated as NOPs.
As usual, this builds and boot Linux for me. I don't think I have
anything else planned for 3.1.0, but I may be wrong as things are a bit
hectic this week.
-----BEGIN PGP SIGNATURE-----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=Y5YG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-rc2' into staging
RISC-V Patches for 3.1-rc2
This pull request contains four patches that aren't really related to
each other aside from all being bug fixes that I think should go in for
3.1.0:
* The second half of Alistair's memory leak patch set that I missed last
week.
* A fix to make fclass.d availiable only on RV64IFD systems (without
this it's availiable on RV32IFD systems, truncating the result).
* A fix to make sfence.vm availiable only in priv-1.9.1, and sfence.vma
only availiable in priv-1.10.
* A change to respect fences in user-mode emulators, which were
previously treated as NOPs.
As usual, this builds and boot Linux for me. I don't think I have
anything else planned for 3.1.0, but I may be wrong as things are a bit
hectic this week.
# gpg: Signature made Tue 13 Nov 2018 23:48:38 GMT
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/riscv/tags/riscv-for-master-3.1-rc2:
RISC-V: Respect fences for user-only emulators
target/riscv: Fix sfence.vm/a both available in any priv version
target/riscv: Fix FCLASS_D being treated as RV64 only
hw/riscv/virt: Free the test device tree node name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb7XzBAAoJEHWtZYAqC0IR3EsIAM6zSEaYlo5fh/VX4KCorYDT
4nb8agEgVdEP4qdRG2PGPeSvN3D63IEgAhR8dugUs8bGey1MU9SEctb5BR5XdJ3c
WEh6x7kNazN7Gsu1R5j0ApBnKh7jfObBVgKMc0c3i2TmAQMypwiZY6GJuLcvgAhV
NJHf8ldu6ephOwForYqerItTD3Cf2Pe0rmggRTEL5LFLgfGW2oem+fwSWLHbyjoC
qKoQDNZ1d+DatJIz92iygUeF1TDhhOa9+QCW3HujAw5v2DFSbSDtlsU7yf5AKJ11
/g91DQOK37vEd9Bhu9Z4bEeeoV2DHGCY18WpV4KESG1GYix14kVhd5goxF3A0II=
=Sw53
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-11-15-1' into staging
Merge tpm 2018/11/15 v1
# gpg: Signature made Thu 15 Nov 2018 14:03:45 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-11-15-1:
tests: tpm: Use g_test_message rather than fprintf
tpm: use loop iterator to set sts data field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When TIS request is done, set 'sts' data field across all localities.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Right now, errors during realize()/pre_plug/plug of the zPCI device
would result in QEMU crashing instead of failing nicely when creating
a zPCI device for a PCI device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181113121710.18490-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit af7d64ede0 (hw/arm/sysbus-fdt: Allow device matching with DT
compatible value) introduced a match_fn callback which gets called
for each registered combo to check whether a sysbus device can be
dynamically instantiated. However the callback gets called even if
the device type does not match the binding combo typename field.
This causes an assert when passing "-device ramfb" to the qemu
command line as vfio_platform_match() gets called on a non
vfio-platform device.
To fix this regression, let's change the add_fdt_node() logic so
that we first check the type and if the match_fn callback is defined,
then we also call it.
Binding combos only requesting a type check do not define the
match_fn callback.
Fixes: af7d64ede0 (hw/arm/sysbus-fdt: Allow device matching with
DT compatible value)
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 20181106184212.29377-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This avoid a memory leak in unhotplug nvme device.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, when hotplug/unhotplug nvme device, it will cause an
assert in object.c. Following is the backtrack:
ERROR:qom/object.c:981:object_unref: assertion failed: (obj->ref > 0)
Thread 2 "qemu-system-x86" received signal SIGABRT, Aborted.
[Switching to Thread 0x7fffcbd32700 (LWP 18844)]
0x00007fffdb9e4fff in raise () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) bt
/lib/x86_64-linux-gnu/libglib-2.0.so.0
/lib/x86_64-linux-gnu/libglib-2.0.so.0
qom/object.c:981
/home/liqiang02/qemu-upstream/qemu/memory.c:1732
/home/liqiang02/qemu-upstream/qemu/memory.c:285
util/qemu-thread-posix.c:504
/lib/x86_64-linux-gnu/libpthread.so.0
This is caused by memory_region_unref in nvme_exit.
Remove it to make the PCIdevice refcount correct.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181016175236.5840-1-peter.maydell@linaro.org
Simplify the code that doesn't need strncpy() since length of string
is already computed.
/home/elmarco/src/qemu/hw/display/edid-generate.c: In function 'edid_desc_text':
/home/elmarco/src/qemu/hw/display/edid-generate.c:168:5: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy((char *)(desc + 5), text, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/edid-generate.c:164:11: note: length computed here
len = strlen(text);
^~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181110111623.31356-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181108111531.30671-7-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The assumption that the fid cannot be used by any other operation is
wrong. At least, nothing prevents a misbehaving client to create a
file with a given fid, and to pass this fid to some other operation
at the same time (ie, without waiting for the response to the creation
request). The call to v9fs_path_copy() performed by the worker thread
after the file was created can race with any access to the fid path
performed by some other thread. This causes use-after-free issues that
can be detected by ASAN with a custom 9p client.
Unlike other operations that only read the fid path, v9fs_co_open2()
does modify it. It should hence take the write lock.
Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Coverity caught a malloc() call that was never freed. This patch ensures
that we free the memory but also updates the allocation to use
g_strdup_printf() instead of malloc().
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add the spapr cap SPAPR_CAP_NESTED_KVM_HV to be used to control the
availability of nested kvm-hv to the level 1 (L1) guest.
Assuming a hypervisor with support enabled an L1 guest can be allowed to
use the kvm-hv module (and thus run it's own kvm-hv guests) by setting:
-machine pseries,cap-nested-hv=true
or disabled with:
-machine pseries,cap-nested-hv=false
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity points out in CID 1390588 that the test for sh == 0
in sdram_size() can never fire, because we calculate sh with
sh = 1024 - ((bcr >> 6) & 0x3ff);
which must result in a value between 1 and 1024 inclusive.
Without the relevant manual for the SoC, we're not completely
sure of the correct behaviour here, but we can remove the
dead code without changing how QEMU currently behaves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In ppc_core99_init(), we allocate an openpic_irqs array, which
we then use to collect up the various qemu_irqs which we're
going to connect to the interrupt controller. Once we've
called sysbus_connect_irq() to connect them all up, the
array is no longer required, but we forgot to free it.
Since board init is only run once at startup, the memory
leak is not a significant one.
Spotted by Coverity: CID 1192916.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix missing terminator in VMStateDescription
Fixes: d811d61fbc
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When allocating an array, it is a recommended coding practice to call
g_new(FooType, n) instead of g_malloc(n * sizeof(FooType)) because
it takes care to avoid overflow when calculating the size of the
allocated block and it returns FooType *, which allows the compiler
to perform type checking.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-rng device is suboptimal when compared to virtio-rng, so
users might want to disable it in their builds. Thus let's introduce
a proper CONFIG switch to allow us to compile QEMU without this device.
The function spapr_rng_populate_dt is required for linking, so move it
to a different location.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pass other sense, such as UNIT_ATTENTION or BUSY, directly to the
guest.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulation of the block limits VPD page called back into scsi-disk.c,
which however expected the request to be for a SCSIDiskState and
accessed a scsi-generic device outside the bounds of its struct
(namely to retrieve s->max_unmap_size and s->max_io_size).
To avoid this, move the emulation code to a separate function that
takes a new SCSIBlockLimits struct and marshals it into the VPD
response format.
Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A device can report an excessive number of VPD pages when asked for a
list; this can cause an out-of-bounds access to buf in
scsi_generic_set_vpd_bl_emulation. It should not happen, but
it is technically not incorrect so handle it: do not check any byte
past the allocation length that was sent to the INQUIRY command.
Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block limits emulation is just placing 0xb0 as the final byte of the
VPD pages list. However, VPD page numbers must be sorted, so change
that to an in-place insert. Since I couldn't find any disk that triggered
the loop more than once, this was tested by adding manually 0xb1
at the end of the list and checking that 0xb0 was added before.
Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While writing a message in 'lsi_do_msgin', message length value
in 'msg_len' could be invalid due to an invalid migration stream.
Add an assertion to avoid an out of bounds access, and reject
the incoming migration data if it contains an invalid message
length.
Discovered by Deja vu Security. Reported by Oracle.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20181026194314.18663-1-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_new() returns a new backend with refcount == 1 and
then later object_property_add_child() increases refcount to 2
So when ivshmem is destroyed, the backend it has created isn't
destroyed along with it as children cleanup will bring
backend's refcount only to 1, which leaks backend including
resources it is using.
Drop the original reference from object_new() once backend
is attached to its parent.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1541069086-167036-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 5503e28504
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'q35' machine type implements an Intel Series 3 chipset,
of which there are several variants:
https://www.intel.com/Assets/PDF/datasheet/316966.pdf
The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0)
and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter
has an integrated graphics adapter. QEMU does not implement integrated
graphics, so uses the PCI ID for the 82P35 chipset, despite calling the
machine type 'q35'. Thus we rename the PCI device ID constant to reflect
reality, to avoid confusing future developers. The new name more closely
matches what pci.ids reports it to be:
$ grep P35 /usr/share/hwdata/pci.ids | grep 29
29c0 82G33/G31/P35/P31 Express DRAM Controller
29c1 82G33/G31/P35/P31 Express PCI Express Root Port
29c4 82G33/G31/P35/P31 Express MEI Controller
29c5 82G33/G31/P35/P31 Express MEI Controller
29c6 82G33/G31/P35/P31 Express PT IDER Controller
29c7 82G33/G31/P35/P31 Express Serial KT Controller
$ grep Q35 /usr/share/hwdata/pci.ids | grep 29
29b0 82Q35 Express DRAM Controller
29b1 82Q35 Express PCI Express Root Port
29b2 82Q35 Express Integrated Graphics Controller
29b3 82Q35 Express Integrated Graphics Controller
29b4 82Q35 Express MEI Controller
29b5 82Q35 Express MEI Controller
29b6 82Q35 Express PT IDER Controller
29b7 82Q35 Express Serial KT Controller
Arguably the QEMU machine type should be named 'p35'. At this point in
time, however, it is not worth the churn for management applications &
documentation to worry about renaming it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180830105757.10577-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Remove can't-happen if() from handle_vec_simd_shli()
* hw/arm/exynos4210: Zero memory allocated for Exynos4210State
* Set S and PTW in 64-bit PAR format
* Fix ATS1Hx instructions
* milkymist: Check for failure trying to load BIOS image
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7I2F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181106' into staging
target-arm queue:
* Remove can't-happen if() from handle_vec_simd_shli()
* hw/arm/exynos4210: Zero memory allocated for Exynos4210State
* Set S and PTW in 64-bit PAR format
* Fix ATS1Hx instructions
* milkymist: Check for failure trying to load BIOS image
# gpg: Signature made Tue 06 Nov 2018 11:37:30 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20181106:
target/arm: Fix ATS1Hx instructions
target/arm: Set S and PTW in 64-bit PAR format
hw/arm/exynos4210: Zero memory allocated for Exynos4210State
milkymist: Check for failure trying to load BIOS image
target/arm: Remove can't-happen if() from handle_vec_simd_shli()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
