The number of blocks is defined in the lower bits [15:0].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-6-philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-5-philmd@linaro.org>
Per the spec v4.3 these commands are mandatory,
but we don't implement them.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-4-philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-3-philmd@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
When ram_block_discard_require() fails, errno is passed to error_setg_errno().
It's a stale value or 0 which is unrelated to ram_block_discard_require().
As ram_block_discard_require() already returns -EBUSY in failure case,
use it as errno for error_setg_errno().
Fixes: 852f0048f3 ("make guest_memfd require uncoordinated discard")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240716064213.290696-1-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Don't pass NULL to module_object_class_by_name(), when the interface is
unavailable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715114420.2062870-1-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add accelerated cursor composition to ui/cocoa. This does not only
improve performance for display devices that exposes the capability to
the guest according to dpy_cursor_define_supported(), but fixes the
cursor display for devices that unconditionally expects the availability
of the capability (e.g., virtio-gpu).
The common pattern to implement accelerated cursor composition is to
replace the cursor and warp it so that the replaced cursor is shown at
the correct position on the guest display for relative pointer devices.
Unfortunately, ui/cocoa cannot do the same because warping the cursor
position interfers with the mouse input so it uses CALayer instead;
although it is not specialized for cursor composition, it still can
compose images with hardware acceleration.
Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-3-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CGImageCreate | Apple Developer Documentation
https://developer.apple.com/documentation/coregraphics/1455149-cgimagecreate
> The color space is retained; on return, you may safely release it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715-cursor-v3-1-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The transfer size check was originally added to prevent consecutive DMA TI
commands from causing an assert() due to an existing SCSI request being in
progress, but since the last set of updates [*] this is no longer required.
Remove the transfer size check from DMA DATA IN and DATA OUT transfers so
that issuing a DMA TI command when there is no data left to transfer does
not cause an assert() due to an existing SCSI request being in progress.
[*] See commits f3ace75be8..78d68f312a
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2415
Message-ID: <20240713224249.468084-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This factors the CPU pause function from pause_all_vcpus() into a
new cpu_pause() function, similarly to cpu_resume(). cpu_resume()
is moved to keep it next to cpu_pause().
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240712120247.477133-17-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
load_image_gzipped() does not seem to be used anywhere. Remove it.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240711072448.32673-1-anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The doc comments for the functions for named GPIO inputs and
outputs had a couple of problems:
* some copy-and-paste errors meant the qdev_connect_gpio_out_named()
doc comment had references to input GPIOs that should be to
output GPIOs
* it wasn't very clear that named GPIOs are arrays and so the
connect functions specify a single GPIO line by giving both
the name of the array and the index within that array
Fix the copy-and-paste errors and slightly expand the text
to say that functions are connecting one line in a named GPIO
array, not a single named GPIO line.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240708153312.3109380-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Makes the code more comprehensible, matches the datasheet and
the piix4 device model.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240704205854.18537-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The read() syscall is not guaranteed to return all data from a file. The
default ROM loader implementation currently does not take this into account,
instead failing if all bytes are not read at once. This change loads the ROM
using g_file_get_contents() instead, which correctly reads all data using
multiple calls to read() while also returning the loaded ROM size.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628182706.99525-1-gregorhaas1997@gmail.com>
[PMD: Use gsize with g_file_get_contents()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is how the steps are ordered in the manual. EFLAGS.NT is
overwritten after the fact in the saved image.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This takes care of probing the vaddr range in advance, and is also faster
because it avoids repeated TLB lookups. It also matches the Intel manual
better, as it says "Checks that the current (old) TSS, new TSS, and all
segment descriptors used in the task switch are paged into system memory";
note however that it's not clear how the processor checks for segment
descriptors, and this check is not included in the AMD manual.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This step is listed in the Intel manual: "Checks that the new task is available
(call, jump, exception, or interrupt) or busy (IRET return)".
The AMD manual lists the same operation under the "Preventing recursion"
paragraph of "12.3.4 Nesting Tasks", though it is not clear if the processor
checks the busy bit in the IRET case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the MMU index to the StackAccess struct, so that it can be cached
or (in the next patch) computed from information that is not in
CPUX86State.
Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupts and call gates should use accesses with the DPL as
the privilege level. While computing the applicable MMU index
is easy, the harder thing is how to plumb it in the code.
One possibility could be to add a single argument to the PUSH* macros
for the privilege level, but this is repetitive and risks confusion
between the involved privilege levels.
Another possibility is to pass both CPL and DPL, and adjusting both
PUSH* and POP* to use specific privilege levels (instead of using
cpu_{ld,st}*_data). This makes the code more symmetric.
However, a more complicated but much nicer approach is to use a structure
to contain the stack parameters, env, unwind return address, and rewrite
the macros into functions. The struct provides an easy home for the MMU
index as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not pre-decrement esp, let the macros subtract the appropriate
operand size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a bug wherein i386/tcg assumed an interrupt return using
the IRET instruction was always returning from kernel mode to either
kernel mode or user mode. This assumption is violated when IRET is used
as a clever way to restore thread state, as for example in the dotnet
runtime. There, IRET returns from user mode to user mode.
This bug is that stack accesses from IRET and RETF, as well as accesses
to the parameters in a call gate, are normal data accesses using the
current CPL. This manifested itself as a page fault in the guest Linux
kernel due to SMAP preventing the access.
This bug appears to have been in QEMU since the beginning.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Co-developed-by: Robert R. Henry <rrh.henry@gmail.com>
Signed-off-by: Robert R. Henry <rrh.henry@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This truncation is now handled by MMU_*32_IDX. The introduction of
MMU_*32_IDX in fact applied correct 32-bit wraparound to 16-bit accesses
with a high segment base (e.g. big real mode or vm86 mode), which did
not use SEG_ADDL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In long mode, POP to memory will write a full 64-bit value. However,
the call to gen_writeback() in gen_POP will use MO_32 because the
decoding table is incorrect.
The bug was latent until commit aea49fbb01 ("target/i386: use gen_writeback()
within gen_POP()", 2024-06-08), and then became visible because gen_op_st_v
now receives op->ot instead of the "ot" returned by gen_pop_T0.
Analyzed-by: Clément Chigot <chigot@adacore.com>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3787324101 ("hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)",
2009-04-17) applied the fix only to the low 32-bits of the comparator, but
it should be done for the high bits as well. Otherwise, the high 32-bits
of the comparator cannot be written and they remain fixed to 0xffffffff.
Co-developed-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When writing a new period, the clamping should use a maximum value
rather tyhan a bit mask. Also, when writing the high bits new_val
is shifted right by 32, so the maximum allowed period should also
be shifted right.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The description of '-runas' and '-run-with' didn't explain that QEMU
will use setuid/setgid to implement the option, so the user might get
confused if using 'elevateprivileges=deny' as well.
Since '-runas' is going to be deprecated and replaced by '-run-with'
in the coming qemu9.1, add the message there.
Signed-off-by: Boqiao Fu <bfu@redhat.com>
Link: https://lore.kernel.org/r/CAFRHJ6J9uMk+HMZL+W+KE1yoRCOLPgbPUVVDku55sdXYiGXXHg@mail.gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3089637461 ("scsi: Don't ignore most usb-storage properties")
removed the call to object_property_set_int() and thus the 'set'
method for the bootindex property was also not called anymore. Here
that method is device_set_bootindex() (as configured by
scsi_dev_instance_init() -> device_add_bootindex_property()) which as
a side effect registers the device via add_boot_device_path().
As reported by a downstream user [0], the bootindex property did not
have the desired effect anymore for legacy drives. Fix the regression
by explicitly calling the add_boot_device_path() function after
checking that the bootindex is not yet used (to avoid
add_boot_device_path() calling exit()).
[0]: https://forum.proxmox.com/threads/149772/post-679433
Cc: qemu-stable@nongnu.org
Fixes: 3089637461 ("scsi: Don't ignore most usb-storage properties")
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Link: https://lore.kernel.org/r/20240710152529.1737407-1-f.ebner@proxmox.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9876359990 ("hw/scsi/lsi53c895a: add timer to scripts
processing") reduced the maximum allowed instruction count by
a factor of 100 all the way down to 100.
This causes the "Check Point R81.20 Gaia" appliance [0] to fail to
boot after fully finishing the installation via the appliance's web
interface (there is already one reboot before that).
With a limit of 150, the appliance still fails to boot, while with a
limit of 200, it works. Bump to 500 to fix the regression and be on
the safe side.
Originally reported in the Proxmox community forum[1].
[0]: https://support.checkpoint.com/results/download/124397
[1]: https://forum.proxmox.com/threads/149772/post-683459
Cc: qemu-stable@nongnu.org
Fixes: 9876359990 ("hw/scsi/lsi53c895a: add timer to scripts processing")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Sven Schnelle <svens@stackframe.org>
Link: https://lore.kernel.org/r/20240715131403.223239-1-f.ebner@proxmox.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capstone v6 made major changes, such as renaming for AArch64, which
broke programs using the old headers, like QEMU. However, Capstone v6
provides the CAPSTONE_AARCH64_COMPAT_HEADER compatibility definition
allowing to build against v6 with the old definitions, so fix the QEMU
build using it.
We can lift that definition and switch to the new naming once our
supported distros have Capstone v6 in place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240715213943.1210355-1-gustavo.romero@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running qemu-system-aarch64 -M virt -nographic and terminating it will
result in a LeakSanitizer error due to remaining queued CPU work so
free it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20240714-cpu-v1-1-19c2f8de2055@daynix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 2b316774f6.
After 038b421788 ("Revert "chardev: use a child source for qio input
source"") we've been observing the "iwp->src == NULL" assertion
triggering periodically during the initial capabilities querying by
libvirtd. One of possible backtraces:
Thread 1 (Thread 0x7f16cd4f0700 (LWP 43858)):
0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
1 0x00007f16c6c21e65 in __GI_abort () at abort.c:79
2 0x00007f16c6c21d39 in __assert_fail_base at assert.c:92
3 0x00007f16c6c46e86 in __GI___assert_fail (assertion=assertion@entry=0x562e9bcdaadd "iwp->src == NULL", file=file@entry=0x562e9bcdaac8 "../chardev/char-io.c", line=line@entry=99, function=function@entry=0x562e9bcdab10 <__PRETTY_FUNCTION__.20549> "io_watch_poll_finalize") at assert.c:101
4 0x0000562e9ba20c2c in io_watch_poll_finalize (source=<optimized out>) at ../chardev/char-io.c:99
5 io_watch_poll_finalize (source=<optimized out>) at ../chardev/char-io.c:88
6 0x00007f16c904aae0 in g_source_unref_internal () from /lib64/libglib-2.0.so.0
7 0x00007f16c904baf9 in g_source_destroy_internal () from /lib64/libglib-2.0.so.0
8 0x0000562e9ba20db0 in io_remove_watch_poll (source=0x562e9d6720b0) at ../chardev/char-io.c:147
9 remove_fd_in_watch (chr=chr@entry=0x562e9d5f3800) at ../chardev/char-io.c:153
10 0x0000562e9ba23ffb in update_ioc_handlers (s=0x562e9d5f3800) at ../chardev/char-socket.c:592
11 0x0000562e9ba2072f in qemu_chr_fe_set_handlers_full at ../chardev/char-fe.c:279
12 0x0000562e9ba207a9 in qemu_chr_fe_set_handlers at ../chardev/char-fe.c:304
13 0x0000562e9ba2ca75 in monitor_qmp_setup_handlers_bh (opaque=0x562e9d4c2c60) at ../monitor/qmp.c:509
14 0x0000562e9bb6222e in aio_bh_poll (ctx=ctx@entry=0x562e9d4c2f20) at ../util/async.c:216
15 0x0000562e9bb4de0a in aio_poll (ctx=0x562e9d4c2f20, blocking=blocking@entry=true) at ../util/aio-posix.c:722
16 0x0000562e9b99dfaa in iothread_run (opaque=0x562e9d4c26f0) at ../iothread.c:63
17 0x0000562e9bb505a4 in qemu_thread_start (args=0x562e9d4c7ea0) at ../util/qemu-thread-posix.c:543
18 0x00007f16c70081ca in start_thread (arg=<optimized out>) at pthread_create.c:479
19 0x00007f16c6c398d3 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
io_remove_watch_poll(), which makes sure that iwp->src is NULL, calls
g_source_destroy() which finds that iwp->src is not NULL in the finalize
callback. This can only happen if another thread has managed to trigger
io_watch_poll_prepare() callback in the meantime.
Move iwp->src destruction back to the finalize callback to prevent the
described race, and also remove the stale comment. The deadlock glib bug
was fixed back in 2010 by b35820285668 ("gmain: move finalization of
GSource outside of context lock").
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@nutanix.com>
Link: https://lore.kernel.org/r/20240712092659.216206-1-sergey.dyasli@nutanix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if the 'legacy-vm-type' property of the sev-guest object is
'on', QEMU will attempt to use the newer KVM_SEV_INIT2 kernel
interface in conjunction with the newer KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM KVM VM types.
This can lead to measurement changes if, for instance, an SEV guest was
created on a host that originally had an older kernel that didn't
support KVM_SEV_INIT2, but is booted on the same host later on after the
host kernel was upgraded.
Instead, if legacy-vm-type is 'off', QEMU should fail if the
KVM_SEV_INIT2 interface is not provided by the current host kernel.
Modify the fallback handling accordingly.
In the future, VMSA features and other flags might be added to QEMU
which will require legacy-vm-type to be 'off' because they will rely
on the newer KVM_SEV_INIT2 interface. It may be difficult to convey to
users what values of legacy-vm-type are compatible with which
features/options, so as part of this rework, switch legacy-vm-type to a
tri-state OnOffAuto option. 'auto' in this case will automatically
switch to using the newer KVM_SEV_INIT2, but only if it is required to
make use of new VMSA features or other options only available via
KVM_SEV_INIT2.
Defining 'auto' in this way would avoid inadvertantly breaking
compatibility with older kernels since it would only be used in cases
where users opt into newer features that are only available via
KVM_SEV_INIT2 and newer kernels, and provide better default behavior
than the legacy-vm-type=off behavior that was previously in place, so
make it the default for 9.1+ machine types.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
cc: kvm@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240710041005.83720-1-michael.roth@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function ufs_is_mcq_reg() and ufs_is_mcq_op_reg() only evaluated
the range of the mcq_reg and mcq_op_reg offset, which is defined as
a constant. Therefore, it was possible for them to return true
even though the ufs device is configured to not support the mcq.
This could cause ufs_mmio_read()/ufs_mmio_write() to result in
Null-pointer-dereference.
So fix it.
Resolves: #2428
Fixes: 5c079578d2 ("hw/ufs: Add support MCQ of UFSHCI 4.0")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
In general, the Use_SSI workaround is no longer needed, and neither is
the pre-1.6 logging shim for kerneldoc.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240703175235.239004-3-jsnow@redhat.com
[rebased on top of origin/master. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
With RHEL 8 support retired (It's been two years since RHEL9 released),
our very oldest build platform version of Sphinx is now 3.4.3; and
keeping backwards compatibility for versions as old as v1.6 when using
domain extensions is a lot of work we don't need to do.
This patch is motivated by my work creating a new QAPI domain, which
unlike the dbus documentation, cannot be allowed to regress by creating
a "dummy" doc when operating under older sphinx versions. Easier is to
raise our minimum version as far as we can push it forwards, reducing my
burden in creating cross-compatibility hacks and patches.
A sampling of sphinx versions from various distributions, courtesy
https://repology.org/project/python:sphinx/versions
Alpine 3.16: v4.3.0 (QEMU support ended 2024-05-23)
Alpine 3.17: v5.3.0
Alpine 3.18: v6.1.3
Alpine 3.19: v6.2.1
Ubuntu 20.04 LTS: EOL
Ubuntu 22.04 LTS: v4.3.2
Ubuntu 22.10: EOL
Ubuntu 23.04: EOL
Ubuntu 23.10: v5.3.0
Ubuntu 24.04 LTS: v7.2.6
Debian 11: v3.4.3 (QEMU support ends 2024-07-xx)
Debian 12: v5.3.0
Fedora 38: EOL
Fedora 39: v6.2.1
Fedora 40: v7.2.6
CentOS Stream 8: v1.7.6 (QEMU support ended 2024-05-17)
CentOS Stream 9: v3.4.3
OpenSUSE Leap 15.4: EOL
OpenSUSE Leap 15.5: 2.3.1, 4.2.0 and 7.2.6
RHEL9 / CentOS Stream 9 becomes the new defining factor in staying at
Sphinx 3.4.3 due to downstream offline build requirements that force us
to use platform Sphinx instead of newer packages from PyPI.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240703175235.239004-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python 3.13 is in beta and Fedora 41 is preparing to make it the default
system interpreter; enable testing for it.
(In the event problems develop prior to release, it should only impact
the check-python-tox job, which is not run by default and is allowed to
fail.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240626232230.408004-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python 3.13 isn't out yet, but it's in beta and Fedora is ramping up to
make it the default system interpreter for Fedora 41.
They moved our cheese for where ContextManager lives; add a conditional
to locate it while we support both pre-3.9 and 3.13+.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20240626232230.408004-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
New bleeding edge versions, new nits to iron out. This addresses the
'check-python-tox' optional GitLab test, while 'check-python-minreqs'
saw no regressions, since it's frozen on an older version of pylint.
Fixes:
qemu/machine/machine.py:345:52: E0606: Possibly using variable 'sock' before assignment (possibly-used-before-assignment)
qemu/utils/qemu_ga_client.py:168:4: R1711: Useless return at end of function or method (useless-return)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240626232230.408004-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZpCKgwAKCRBAov/yOSY+
3yuEBADmzjhomzzTnTHvOTPcK8Ugrru1QY9gT+5m7+I3cdbSRsYxEZLOdnjDAPBJ
aVO+ZOkNFHspOOAo5A55QRC0PA4YGDGMg+ZcB7AVhzbdmra7SKdzMzrrVfYJYpk5
CtcrI+4OPt+U6mh/eTKuaXaWgjuoZ+TOjZqhL+rrpIFjcN78Rw==
=vhZy
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240712' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240712
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZpCKgwAKCRBAov/yOSY+
# 3yuEBADmzjhomzzTnTHvOTPcK8Ugrru1QY9gT+5m7+I3cdbSRsYxEZLOdnjDAPBJ
# aVO+ZOkNFHspOOAo5A55QRC0PA4YGDGMg+ZcB7AVhzbdmra7SKdzMzrrVfYJYpk5
# CtcrI+4OPt+U6mh/eTKuaXaWgjuoZ+TOjZqhL+rrpIFjcN78Rw==
# =vhZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jul 2024 06:44:35 PM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240712' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix cpu_reset set wrong CSR_CRMD
target/loongarch: Set CSR_PRCFG1 and CSR_PRCFG2 values
target/loongarch: Remove avail_64 in trans_srai_w() and simplify it
target/loongarch/kvm: Add software breakpoint support
MAINTAINERS: Add myself as a reviewer of LoongArch virt machine
hw/loongarch/virt: Remove unused assignment
hw/loongarch: Change the tpm support by default
hw/loongarch/boot.c: fix out-of-bound reading
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
