We're hitting an assert when we pass in alignment == 0 since that's not
a power of two. so pass in the ideal page size.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230728162927.5009-1-imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With reserved_va, mmap.c expects to have pre-allocated host address
space for the entire guest address space. When combined with the -B
command-line option, ensure that the chosen address does not overlap
anything else. Ensure that mmap_next_start is within reserved_va,
as we use it within mmap.c without checking.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230727161148.444988-1-richard.henderson@linaro.org>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
Use the interval tree to find empty space, rather than
probing each page in turn.
Cc: Warner Losh <imp@bsdimp.com>
Cc: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-bt: Warner Losh <imp@bsdimp.com>
Message-Id: <20230707204054.8792-18-richard.henderson@linaro.org>
The previous check returned -1 when any page within
[start, start+len) is unmapped, not when all are unmapped.
Cc: Warner Losh <imp@bsdimp.com>
Cc: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230707204054.8792-11-richard.henderson@linaro.org>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not reverse the order of environment variables in the target environ
array relative to the incoming environ order. Some testsuites depend on a
specific order, even though it is not defined by any standard.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <mvmlejfsivd.fsf@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is pure duplication now. Both bsd-user and linux-user have
builtin strace support and we can also track syscalls via the plugins
system.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-2-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-2-alex.bennee@linaro.org>
[Remove unused variable in do_freebsd_syscall() reported by Richard
Henderson.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
The '-singlestep' option is confusing, because it doesn't actually
have anything to do with single-stepping the CPU. What it does do
is force TCG emulation to put one guest instruction in each TB,
which can be useful in some situations.
Create a new command line argument -one-insn-per-tb, so we can
document that -singlestep is just a deprecated synonym for it,
and eventually perhaps drop it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-6-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
do_freebsd_sysctlbyname needs to translate the 'name' back down to a OID
so we can intercept the special ones. Do that and call the common wrapper
do_freebsd_sysctl_oid.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the wrapper function for sysctl(2). This puts the oid
arguments into a standard form and calls the common
do_freebsd_sysctl_oid.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Co-Authored-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Co-Authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Intercept some syscalls that we need to translate (like the archiecture
we're running on) and translate them. These are only the simplest ones
so far.
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Co-Authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Co-Authored-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
do_freebsd_sysctl_oid filters out some of the binary and special sysctls
where host != target. None of the sysctls that have to be translated from
host to target are handled here.
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Co-Authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Co-Authored-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Helper functions for sysctl implementations. sysctl_name2oid and
sysctl_oidfmt convert oids between host and targets
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
oidfmt uses undocumented system call to get the type of the sysctl.
Co-Authored-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Co-Authored-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Co-Authored-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Signed-off-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
cap_memory - Caps the memory to just below MAXINT
scale_to_guest_pages - Account for difference in host / guest page size
h2g_long_sat - converts a int64_t to a int32_t, saturating at max / min values
h2g_ulong_sat - converts a uint64_t to a uint32_t, saturating at max value
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Connect up the sysarch system call.
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Co-authored-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
System call return values on FreeBSD are in a register (which is spelled
abi_long in qemu). This was being assigned into an int variable which
causes problems for 64bit targets.
Resolves: https://github.com/qemu-bsd-user/qemu-bsd-user/issues/40
Signed-off-by: Doug Rabson <dfr@rabson.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
[ Edited commit message for upstreaming into qemu-project ]
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since bsd-user/mmap.c uses the
pthread API. Therefore when building it with -Wthread-safety the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-3-eesposit@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-6-armbru@redhat.com>
Some versions of FreeBSD now require sys/param.h for machine/pmap.h on
x86. Include them here to meet that requirement. It does no harm on
older versions, so there's no need to #ifdef it.
Signed-off-by: Muhammad Moinur Rahman <bofh@FreeBSD.org>
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf7130851, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the last series, I inadvertantly didn't remove this inline, but did
all the others. Remove it for consistency.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
These implement both the old-pre INO64 mknod variations, as well as the
now current INO64 variant. Make direct syscall calls for these older
syscalls to avloid too many dependencies.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implemenet rmdir and __getcwd. __getcwd is the undocumented
back end to getcwd(3).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Plus the helper LOCK_PATH2 and UNLOCK_PATH2 macros.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
