However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Any one TB will have only one space value. If we change spaces,
we change TBs. Thus BE and BEV must exit the TB immediately.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions force the destination privilege level
of the branch destination to be no higher than current.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the system virtual address width to 64-bit and
incorporates the space registers into load/store operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the E bit is only used for pa2.0 mfctl,w from sar,
the otherwise reserved bit does not appear to be decoded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most aspects of privilege are not yet handled. But this
gives us the start from which to begin checking.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes. Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't actually do anything with most of the bits yet,
but at least they have names and we have somewhere to
store them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the addition of default-configs/hppa-softmmu.mak, this
will compile. It is not enabled with this patch, however.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJab54VAAoJEHWtZYAqC0IRZ+IH+QFtVX3R9fVxlSmFtPs7L9+s
a+WbbVbYf0toiTg1taRoYgyGkryc8Gtw8VJrN2iowM8KFjEx+h2cZ3qoRd15GqP6
jFAGb0lc6tjOk0O5pDiJU8hErSrIda8biBp/I0QDz3RkXeGrAZ7FrQemj0FXQjEG
0o+xGstCYKrVfGxrnDysfvyGSDOad0HnBqwc0rerbVjBJe5p8UErP8DSPsNCaj6W
qbSSgySeMnTeXGOwIXgCW43eTEJG13eBQ/rNJRqrcoIXiBd/txPb+c+E1iBBAmrF
XZHxS4v8vP+8rVRgBut4sIr2psx1DZvktHRThJDgu+Cyv6h7c6okQ0wxmo0+9bo=
=k7Fh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-01-26-2' into staging
Merge tpm 2018/01/26 v2
# gpg: Signature made Mon 29 Jan 2018 22:20:05 GMT
# gpg: using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-01-26-2:
tpm: add CRB device
tpm: report backend request error
tpm: replace GThreadPool with AIO threadpool
tpm: lookup cancel path under tpm device class
tpm: fix alignment issues
tpm: Set the flags of the CMD_INIT command to 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SPARC code in linux-user/signal.c defines a set of
MC_* constants. On some SPARC hosts these are also defined
by sys/ucontext.h, resulting in build failures:
linux-user/signal.c:2786:0: error: "MC_NGREG" redefined [-Werror]
#define MC_NGREG 19
In file included from /usr/include/signal.h:302:0,
from include/qemu/osdep.h:86,
from linux-user/signal.c:19:
/usr/include/sparc64-linux-gnu/sys/ucontext.h:59:0: note: this is the location of the previous definition
# define MC_NGREG __MC_NGREG
Rename all these constants to SPARC_MC_* to avoid the clash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1517318239-15764-1-git-send-email-peter.maydell@linaro.org
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use an Error** for request to let the caller handle error reporting.
This will also allow to inform the frontend of a backend error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The TPM backend uses a GThreadPool to handle IO in a seperate
thread. However, GThreadPool isn't integrated with Qemu main loops,
making it unnecessarily complicated to deal with.
Qemu has a AIO threadpool, that is better integrated with loops and
various IO functions, provides completion BH by default etc.
Remove the only user of GThreadPool from qemu, use AIO threadpool.
Note that the backend:
- no longer accepts queing multiple requests (unneeded so far)
- increase ref to itself when handling a command, for extra safety
- tpm_backend_thread_end() is renamed tpm_backend_finish_sync() and
will wait for completion of BH (request_completed), which will help
migration handling.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Since Linux commit 313d21eeab9282e, tpm devices have their own device
class "tpm" and the cancel path must be looked up under
/sys/class/tpm/ instead of /sys/class/misc/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The new tpm-crb-test fails on sparc host:
TEST: tests/tpm-crb-test... (pid=230409)
/i386/tpm-crb/test:
Broken pipe
FAIL
GTester: last random seed: R02S29cea50247fe1efa59ee885a26d51a85
(pid=230423)
FAIL: tests/tpm-crb-test
and generates a new clang sanitizer runtime warning:
/home/petmay01/linaro/qemu-for-merges/hw/tpm/tpm_util.h:36:24: runtime
error: load of misaligned address 0x7fdc24c00002 for type 'const
uint32_t' (aka 'const unsigned int'), which requires 4 byte alignment
0x7fdc24c00002: note: pointer points here
<memory cannot be printed>
The sparc architecture does not allow misaligned loads and will
segfault if you try them. For example, this function:
static inline uint32_t tpm_cmd_get_size(const void *b)
{
return be32_to_cpu(*(const uint32_t *)(b + 2));
}
Should read,
return ldl_be_p(b + 2);
As a general rule you can't take an arbitrary pointer into a byte
buffer and try to interpret it as a structure or a pointer to a
larger-than-bytesize-data simply by casting the pointer.
Use this clean up as an opportunity to remove unnecessary temporary
buffers and casts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The flags of the CMD_INIT control channel command were not
initialized properly. Fix this and set to 0.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJabtfbAAoJEO8Ells5jWIROgUH/2SeXD7Du1w0Ry5Bc7uKBR51
jGm+324jfT5mqajlWQ5rGMTEUHLGX8H4s05FT3/gTl0xTea5rSrUTeW+7RgJaE+N
pOaF0vEhms3sg9rZoF84XlkKjKKsZvAFcK4QRrp4Jc1djQQmOc7d+7wbiGFN5+Ii
OCzq3V4hhVhyFvpasP92aIxdvmz4yW1Vng35njVLm7xTyblMm4mQ/S6qH+/j5UXT
8vEheABU5nt9XTMJO8FaeFe2XzsXgV9ng5NiwR7aPLdghRFffSKUsxTsDJ061BIJ
PbJh/XpELIgsscK6SpEhACeV2gcr2qYbqXS94kWNXziEYdl+oU7ZYLEEMdQIKeE=
=sd76
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
MAINTAINERS: update Dmitry Fleytman email
qemu-doc: Get rid of "vlan=X" example in the documentation
net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'
net: Allow hubports to connect to other netdevs
colo: compare the packet based on the tcp sequence number
colo: modified the payload compare function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's another batch of patches for ppc, spapr and related things.
Higlights:
* Implement (with a bunch of necessary infrastructure) a hypercall
to let guests properly apply Spectre and Meltdown workarounds.
* Convert a number of old devices to trace events
* Fix some bugs
-----BEGIN PGP SIGNATURE-----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=N96F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180129' into staging
ppc patch queue 2018-01-29
Here's another batch of patches for ppc, spapr and related things.
Higlights:
* Implement (with a bunch of necessary infrastructure) a hypercall
to let guests properly apply Spectre and Meltdown workarounds.
* Convert a number of old devices to trace events
* Fix some bugs
# gpg: Signature made Mon 29 Jan 2018 03:27:30 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180129:
target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS
target/ppc/spapr_caps: Add new tristate cap safe_indirect_branch
target/ppc/spapr_caps: Add new tristate cap safe_bounds_check
target/ppc/spapr_caps: Add new tristate cap safe_cache
target/ppc/spapr_caps: Add support for tristate spapr_capabilities
target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch]
spapr_pci: fix MSI/MSIX selection
input: add missing newline from trace-events
uninorth: convert to trace-events
grackle: convert to trace-events
ppc: Deprecate qemu-system-ppcemb
ppc/pnv: fix PnvChip redefinition in <hw/ppc/pnv_xscom.h>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
C functions with no arguments must be declared foo(void) instead of
foo(). The tracetool argument list parser has never accepted an empty
argument list. This patch adds a clear error message for this error
case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The terminology used by tracetool is not consistent with C sprintf or
docs/devel/tracing.txt. The word "formats" is sometimes used to mean
"format strings".
This patch clarifies comments and error messages that contain this word.
Note that the error message lines are longer than 80 characters but I
have not wrapped them to aid grepping.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the file line number in the message that is printed when
trace-events parse errors are raised.
[Use enumerate(fobj, 1) to avoid having to increment a 0-based index
later, as suggested by Eric Blake.
--Stefan]
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace the keymap_qcode table with automatically generated
tables.
Missing entries in keymap_qcode now fixed:
Q_KEY_CODE_ASTERISK -> KEY_KPASTERISK
Q_KEY_CODE_KP_MULTIPLY -> KEY_KPASTERISK
Q_KEY_CODE_STOP -> KEY_STOP
Q_KEY_CODE_AGAIN -> KEY_AGAIN
Q_KEY_CODE_PROPS -> KEY_PROPS
Q_KEY_CODE_UNDO -> KEY_UNDO
Q_KEY_CODE_FRONT -> KEY_FRONT
Q_KEY_CODE_COPY -> KEY_COPY
Q_KEY_CODE_OPEN -> KEY_OPEN
Q_KEY_CODE_PASTE -> KEY_PASTE
Q_KEY_CODE_FIND -> KEY_FIND
Q_KEY_CODE_CUT -> KEY_CUT
Q_KEY_CODE_LF -> KEY_LINEFEED
Q_KEY_CODE_HELP -> KEY_HELP
Q_KEY_CODE_COMPOSE -> KEY_COMPOSE
Q_KEY_CODE_RO -> KEY_RO
Q_KEY_CODE_HIRAGANA -> KEY_HIRAGANA
Q_KEY_CODE_HENKAN -> KEY_HENKAN
Q_KEY_CODE_YEN -> KEY_YEN
Q_KEY_CODE_KP_COMMA -> KEY_KPCOMMA
Q_KEY_CODE_KP_EQUALS -> KEY_KPEQUAL
Q_KEY_CODE_POWER -> KEY_POWER
Q_KEY_CODE_SLEEP -> KEY_SLEEP
Q_KEY_CODE_WAKE -> KEY_WAKEUP
Q_KEY_CODE_AUDIONEXT -> KEY_NEXTSONG
Q_KEY_CODE_AUDIOPREV -> KEY_PREVIOUSSONG
Q_KEY_CODE_AUDIOSTOP -> KEY_STOPCD
Q_KEY_CODE_AUDIOPLAY -> KEY_PLAYPAUSE
Q_KEY_CODE_AUDIOMUTE -> KEY_MUTE
Q_KEY_CODE_VOLUMEUP -> KEY_VOLUMEUP
Q_KEY_CODE_VOLUMEDOWN -> KEY_VOLUMEDOWN
Q_KEY_CODE_MEDIASELECT -> KEY_MEDIA
Q_KEY_CODE_MAIL -> KEY_MAIL
Q_KEY_CODE_CALCULATOR -> KEY_CALC
Q_KEY_CODE_COMPUTER -> KEY_COMPUTER
Q_KEY_CODE_AC_HOME -> KEY_HOMEPAGE
Q_KEY_CODE_AC_BACK -> KEY_BACK
Q_KEY_CODE_AC_FORWARD -> KEY_FORWARD
Q_KEY_CODE_AC_REFRESH -> KEY_REFRESH
Q_KEY_CODE_AC_BOOKMARKS -> KEY_BOOKMARKS
NB, the virtio-input device reports a bitmask to the guest driver that
has a bit set for each Linux keycode that the host is able to send to
the guest.
Thus by adding these extra key mappings we are technically changing the
host<->guest ABI. This would also happen any time we defined new mappings
for QEMU keycodes in future.
When a keycode is removed from the list of possible keycodes that host can
send to the guest, it means that the guest OS will think it is possible
to receive a key that in pratice can never be generated, which is harmless.
When a keycode is added to the list of possible keycodes that the host can
send to the guest, it means that the guest OS can see an unexpected event.
The Linux virtio_input.c driver code simply forwards this event to the
input_event() method in the Linux input subsystem. This in turn calls
input_handle_event(), which then calls input_get_disposition(). This method
checks if the input event is present in the permitted keys bitmap, and if
not returns INPUT_IGNORE_EVENT. Thus the unexpected event will get dropped,
which is harmless.
If the guest OS reboots, or otherwise re-initializes the virt-input device,
it will read the new keycode bitmap. No matter how many keys are defined,
the config space has a fixed 128 byte bitmap. There is, however, a size
field defiend which says how many bytes in the bitmap are used. So the guest
OS reads the size of the bitmap, and then it reads the data from bitmap upto
the designated size. So if the guest OS re-initializes at precisely the time
that QEMU is migrated across versions, in the worst case, it could conceivably
read the old size field, but then get the newly updated bitmap. If a key were
added this is harmless, since it simply means it may not process the newly
added key. If a key were removed, then it could be readnig a byte from the
bitmap that was not initialized. Fortunately QEMU always memsets() the entire
bitmap to 0, prior to setting keybits. Thus the guest OS will simply read
zeros, which is again harmless.
Based on this analysis, it is believed that there is no need to preserve the
virtio-input-hid keymaps across migration, as the host<->guest ABI change is
harmless and self-resolving at time of guest reboot.
NB, this behaviour should perhaps be formalized in the virtio-input spec
to declare how guest OS drivers should be written to be robust in their
handling of the potentially changable key bitmaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
During Qemu guest migration, a destination process invokes ps2
post_load function. In that, if 'rptr' and 'count' values were
invalid, it could lead to OOB access or infinite loop issue.
Add check to avoid it.
Reported-by: Cyrille Chatras <cyrille.chatras@orange.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171116075155.22378-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Linux, a mouse event is generated for both down and up when mouse
wheel is used. This caused virtio_input_send() to be called twice each
time the wheel was used.
This commit adds a check for the button down state and only calls
virtio_input_send() when it is true.
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20171222152531.1849-4-miika9764@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vlan concept is marked as deprecated, so we should not use
this for examples in the documentation anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It does not make much sense to limit these commands to the legacy 'vlan'
concept only, they should work with the modern netdevs, too. So now
it is possible to use this command with one, two or three parameters.
With one parameter, the command installs a hostfwd rule on the default
"user" network:
hostfwd_add tcp:...
With two parameters, the command installs a hostfwd rule on a netdev
(that's the new way of using this command):
hostfwd_add netdev_id tcp:...
With three parameters, the command installs a rule on a 'vlan' (aka hub):
hostfwd_add hub_id name tcp:...
Same applies to the hostfwd_remove command now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
