Commit Graph

2918 Commits

Author SHA1 Message Date
Richard Henderson
c8e7fef102 target/s390x: Implement s390_cpu_record_sigsegv
Move the masking of the address from cpu_loop into
s390_cpu_record_sigsegv -- this is governed by hw, not linux.
This does mean we have to raise our own exception, rather
than return to the fallback.

Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING.
Use the appropriate si_code for each in cpu_loop.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
263e2ab20c target/riscv: Make riscv_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for riscv linux-user.

Remove the code from cpu_loop that raised SIGSEGV.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
12f0bc5579 target/openrisc: Make openrisc_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient for
openrisc linux-user.

This makes all of the code in mmu.c sysemu only, so remove
the ifdefs and move the file to openrisc_softmmu_ss.
Remove the code from cpu_loop that handled EXCP_DPF.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
d315712b69 linux-user/openrisc: Abort for EXCP_RANGE, EXCP_FPE
QEMU does not allow the system control bits for either exception to
be enabled in linux-user, therefore both exceptions are dead code.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
52d4899bf3 target/mips: Make mips_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for mips linux-user.

This means we can remove tcg/user/tlb_helper.c entirely.
Remove the code from cpu_loop that raised SIGSEGV.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
fd297732a2 target/microblaze: Make mb_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for microblaze linux-user.

Remove the code from cpu_loop that handled the unnamed 0xaa exception.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
028772c45c target/m68k: Make m68k_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for m68k linux-user.

Remove the code from cpu_loop that handled EXCP_ACCESS.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
860e0b965b target/hppa: Make hppa_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for hppa linux-user.

Remove the code from cpu_loop that raised SIGSEGV.
This makes all of the code in mem_helper.c sysemu only,
so remove the ifdefs and move the file to hppa_softmmu_ss.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
70863887a8 target/hexagon: Remove hexagon_cpu_tlb_fill
The fallback code in cpu_loop_exit_sigsegv is sufficient
for hexagon linux-user.

Remove the code from cpu_loop that raises SIGSEGV.

Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
5753605412 target/cris: Make cris_cpu_tlb_fill sysemu only
The fallback code in cpu_loop_exit_sigsegv is sufficient
for cris linux-user.

Remove the code from cpu_loop that handled the unnamed 0xaa exception.
This makes all of the code in helper.c sysemu only, so remove the
ifdefs and move the file to cris_softmmu_ss.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
90113883af target/alpha: Implement alpha_cpu_record_sigsegv
Record trap_arg{0,1,2} for the linux-user signal frame.

Fill in the stores to trap_arg{1,2} that were missing
from the previous user-only alpha_cpu_tlb_fill function.
Use maperr to simplify computation of trap_arg1.

Remove the code for EXCP_MMFAULT from cpu_loop, as
that part is now handled by cpu_loop_exit_sigsegv.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
72d2bbf9ff linux-user: Add cpu_loop_exit_sigsegv
This is a new interface to be provided by the os emulator for
raising SIGSEGV on fault.  Use the new record_sigsegv target hook.

Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
04de121aaf linux-user/signal: Drop HOST_SIGNAL_PLACEHOLDER
Now that all of the linux-user hosts have been converted
to host-signal.h, drop the compatibility code.

Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
4f3bbd9cfb linux-user/host/riscv: Improve host_signal_write
Do not read 4 bytes before we determine the size of the insn.
Simplify triple switches in favor of checking major opcodes.
Include the missing cases of compact fsd and fsdsp.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:52 -04:00
Richard Henderson
97be8c6a95 linux-user/host/riscv: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:51 -04:00
Richard Henderson
b12161120a linux-user/host/mips: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:50 -04:00
Richard Henderson
66ee11d407 linux-user/host/s390: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:46 -04:00
Richard Henderson
cf5f42fd07 linux-user/host/aarch64: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:45 -04:00
Richard Henderson
a30bfaa7bd linux-user/host/arm: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:44 -04:00
Richard Henderson
8b5bd46193 linux-user/host/sparc: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Drop the Solaris code as completely unused.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:43 -04:00
Richard Henderson
44c8f2cd90 linux-user/host/alpha: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:42 -04:00
Richard Henderson
8cc7b85d56 linux-user/host/ppc: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:41 -04:00
Richard Henderson
85442fce49 linux-user/host/x86: Populate host_signal.h
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02 07:00:38 -04:00
Richard Henderson
e6037d04c5 linux-user: Reorg handling for SIGSEGV
Add stub host-signal.h for all linux-user hosts.
Add new code replacing cpu_signal_handler.
Full migration will happen one host at a time.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-30 09:52:04 -07:00
Richard Henderson
ba0e733362 configure: Merge riscv32 and riscv64 host architectures
The existing code for safe-syscall.inc.S will compile
without change for riscv32 and riscv64.  We may also
drop the meson.build stanza that merges them for tcg/.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-30 09:52:04 -07:00
Richard Henderson
e91a7227cb target/riscv: Split misa.mxl and misa.ext
The hw representation of misa.mxl is at the high bits of the
misa csr.  Representing this in the same way inside QEMU
results in overly complex code trying to check that field.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Matheus Ferst
10de052188 linux-user: Fix XER access in ppc version of elf_core_copy_regs
env->xer doesn't hold some bits of XER, like OV and CA. To write the
complete register in the core dump we should read XER value with
cpu_read_xer.

Reported-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-4-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-21 11:42:47 +11:00
Matheus Ferst
66c6b40aba linux-user/ppc: Fix XER access in save/restore_user_regs
We should use cpu_read_xer/cpu_write_xer to save/restore the complete
register since some of its bits are in other fields of CPUPPCState. A
test is added to prevent future regressions.

Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-2-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-21 11:42:47 +11:00
Warner Losh
dda2da6c94 meson: *-user: only descend into *-user when configured
To increase flexibility, only descend into *-user when that is
configured. This allows *-user to selectively include directories based
on the host OS which may not exist on all hosts. Adopt Paolo's
suggestion of checking the configuration in the directories that know
about the configuration.

Message-Id: <20210926220103.1721355-2-f4bug@amsat.org>
Message-Id: <20210926220103.1721355-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Warner Losh <wlosh@bsdimp.com>
Acked-by: Paolo Bonzini <pbonzinni@redhat.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
2021-10-18 12:51:39 -06:00
Richard Henderson
525c4670c5 linux-user: Remove default for TARGET_ARCH_HAS_SIGTRAMP_PAGE
All targets now define TARGET_ARCH_HAS_SIGTRAMP_PAGE.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-26-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
55e83c2005 linux-user/xtensa: Implement setup_sigtramp
Create and record the rt signal trampoline.
Use it when the guest does not use SA_RESTORER.

Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
3f7685eaf9 linux-user/sparc: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.

Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
b9188f9ccc linux-user/sh4: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
31330e6cec linux-user/s390x: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.

Cc: qemu-s390x@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
3c62b5d201 linux-user/riscv: Implement setup_sigtramp
Create and record the rt signal trampoline.

This fixes a bug wrt libgcc fallback unwinding.  It expects
the stack pointer to point to the siginfo_t, whereas we had
inexplicably placed our private signal trampoline at the start
of the signal frame instead of the end.  Now moot because we
have removed it from the stack frame entirely.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
c790e4ebfe linux-user/ppc: Implement setup_sigtramp
Create and record the two signal trampolines.

Cc: qemu-ppc@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
5d2fc70f57 linux-user/ppc: Simplify encode_trampoline
The sigret parameter is never 0, and even if it was the encoding
of the LI instruction would still work.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
9ce3ad4452 linux-user/openrisc: Implement setup_sigtramp
Create and record the rt signal trampoline.

Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
f32d3b6793 linux-user/nios2: Document non-use of setup_sigtramp
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
317a33b6eb linux-user/mips: Implement setup_sigtramp
Create and record the two signal trampolines.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
4f7a0a4c86 linux-user/mips: Tidy install_sigtramp
The return value is constant 0, and unused as well -- change to void.
Drop inline marker.  Change tramp type to uint32_t* for clarity.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
8004316d81 linux-user/microblaze: Implement setup_sigtramp
Create and record the rt signal trampoline.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
5125aced7c linux-user/m68k: Implement setup_sigtramp
Create and record the two signal trampolines.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
db20554159 linux-user/x86_64: Raise SIGSEGV if SA_RESTORER not set
This has been a fixme for some time.  The effect of
returning -EFAULT from the kernel code is to raise SIGSEGV.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
8ee8a10480 linux-user/i386: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.
Note that x86_64 does not use this code.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
a22fccd8b7 linux-user/hppa: Document non-use of setup_sigtramp
We cannot use a raw sigtramp page for hppa,
but must wait for full vdso support.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
c8ef02b1ac linux-user/hexagon: Implement setup_sigtramp
Continue to initialize the words on the stack, as documented.
However, use the off-stack trampoline.

Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
e281c2bafe linux-user/cris: Implement setup_sigtramp
Split out setup_sigreturn so that we can continue to
initialize the words on the stack, as documented.
However, use the off-stack trampoline.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
dd55f1c8b2 linux-user/alpha: Implement setup_sigtramp
Create and record the two signal trampolines.
Use them when the guest does not use ka_restorer.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
b5d66e0dd8 linux-user/arm: Implement setup_sigtramp
Mirror what the kernel does in arch/arm/kernel/signal.h,
using the old sigframe struct in the rt sigframe struct.

Update the trampoline code to match the kernel: this uses
sp-relative accesses rather than pc-relative.

Copy the code into frame->retcode from the trampoline page.
This minimises the different cases wrt arm vs thumb vs fdpic.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210929130553.121567-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
b807a1087e linux-user/arm: Drop "_v2" from symbols in signal.c
Since we no longer support "v1", there's no need to distinguish "v2".

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
eef9790007 linux-user/arm: Drop v1 signal frames
Version 2 signal frames are used from 2.6.12 and since cbc14e6f28,
we have set UNAME_MINIMUM_RELEASE to 2.6.32.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
c70887a382 linux-user/aarch64: Implement setup_sigtramp
Create and record the rt signal trampoline.
Use it when the guest does not use SA_RESTORER.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:48 +02:00
Richard Henderson
db2af69d6b linux-user: Add infrastructure for a signal trampoline page
Allocate a page to hold the signal trampoline(s).
Invoke a guest-specific hook to fill in the contents
of the page before marking it read-execute again.

Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-01 12:03:47 +02:00
Peter Maydell
fce9608d02 linux-user/aarch64: Use force_sig_fault()
Use the new force_sig_fault() function instead of setting up
a target_siginfo_t and calling queue_signal().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:43:58 +02:00
Peter Maydell
4c90f0ba9d linux-user/arm: Use force_sig_fault()
Use the new force_sig_fault() function instead of setting up
a target_siginfo_t and calling queue_signal().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:43:34 +02:00
Peter Maydell
af7969605e linux-user: Provide new force_sig_fault() function
In many places in the linux-user code we need to queue a signal for
the guest using the QEMU_SI_FAULT si_type.  This requires that the
caller sets up and passes us a target_siginfo, including setting the
appropriate part of the _sifields union for the si_type. In a number
of places the code forgets to set the _sifields union field.

Provide a new force_sig_fault() function, which does the same thing
as the Linux kernel function of that name -- it takes the signal
number, the si_code value and the address to use in
_sifields._sigfault, and assembles the target_siginfo itself.  This
makes the callsites simpler and means it's harder to forget to pass
in an address value.

We follow force_sig() and the kernel's force_sig_fault() in not
requiring the caller to pass in the CPU pointer but always acting
on the CPU of the current thread.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:42:55 +02:00
Peter Maydell
819121b9b0 linux-user: Zero out target_siginfo_t in force_sig()
The target_siginfo_t we populate in force_sig() will eventually
get copied onto the target's stack. Zero it out so that any extra
padding in the sifields union is consistently zero when the guest
sees it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:42:55 +02:00
Peter Maydell
babe6d5c88 linux-user/arm: Use force_sig() to deliver fpa11 emulation SIGFPE
In the Arm target code, when the fpa11 emulation code tells us we
need to send the guest a SIGFPE, we do this with queue_signal(), but
we are using the wrong si_type, and we aren't setting the _sifields
union members corresponding to either the si_type we are using or the
si_type we should be using.

As the existing comment notes, the kernel code for this calls the old
send_sig() function to deliver the signal.  This eventually results
in the kernel's signal handling code fabricating a siginfo_t with a
SI_KERNEL code and a zero pid and uid.  For QEMU this means we need
to use QEMU_SI_KILL.  We already have a function for that:
force_sig() sets up the whole target_siginfo_t the way we need it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:42:55 +02:00
Peter Maydell
1af354120d linux-user/arm: Set siginfo_t addr field for SIGTRAP signals
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field
to the PC where the breakpoint/singlestep trap occurred; this is
what the kernel does for this signal for this architecture.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:42:55 +02:00
Peter Maydell
1fb6a87d0b linux-user/aarch64: Set siginfo_t addr field for SIGTRAP signals
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field
to the PC where the breakpoint/singlestep trap occurred; this is
what the kernel does for this signal for this architecture.

Fixes: Coverity 1459154
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210813131809.28655-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23 14:42:55 +02:00
Peter Maydell
c99e34e537 Pull request linux-user 20210916
Code cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmFDXr4SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748iUEP/Rf7tFkzvRjSBYaFEsJ1vKi3azPO90fk
 YZ1CfSp+NNLkWcO82Eyl0PUx5lY4rXNIDIpawh5t0LddMwiQRzZKU7VQM/wLsNZB
 n98KLZKmJFpevsFK3+N9VGg5uLLXdGySQIGyZvdIB0zOTnYlHsg4u2MlETeY2H00
 amgJzZOQZIiUPfzHQ8DUtDuC+rmfEaIFsM3EpBkEsuc0UITW6L3ZVqffveOxejkv
 i4bTcOqmpwZPZ5doa1PiN31KhqWE8F1mc1h+Aqg2KxOG5UqY5xouYFM3h7VoXNau
 nBFUtVdqH3XGsbBV7arupt0iMpucgNdOH9D16JAnJnw6oBHxq4Rfn3OFKmbzwXM9
 R+VnXsUjC7XJYtgKgiGEjRk0kPdlYWEhooncQnqTcG7A3ruTgnCtQpa5XW7yAxzt
 LqvICuERbeaXa5cqlr7nePdprxO4Z96nisgIlccMAUUycuZRADe88y/nrbJ/htiA
 rryMSAp4ywmKWGSzaoML7XdyaBfixCPy/2uCq/OIpFpnCvEaJHJ0UCbVYyzFUJiZ
 cPD/Onkvn2axCZ3G367pHXzopOgeoAOkOeKW3lru0kVwmuRqt4LgGxuT//14y8yA
 neJJWdeqCm0MeN5iqEeFXpS5PJQzSVYJ1i/ERJbl0IrLxmWZwFWyxiHyHs1uibPG
 gNyFWN70WtUk
 =+BMT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-6.2-pull-request' into staging

Pull request linux-user 20210916

Code cleanup

# gpg: Signature made Thu 16 Sep 2021 16:11:58 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-6.2-pull-request:
  linux-user: Check lock_user result for ip_mreq_source sockopts
  linux-user: Drop unneeded includes from qemu.h
  linux-user: Don't include gdbstub.h in qemu.h
  linux-user: Split linux-user internals out of qemu.h
  linux-user: Split safe-syscall macro into its own header
  linux-user: Split mmap prototypes into user-mmap.h
  linux-user: Split loader-related prototypes into loader.h
  linux-user: Split signal-related prototypes into signal-common.h
  linux-user: Split strace prototypes into strace.h
  linux-user: Fix coding style nits in qemu.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-16 21:09:18 +01:00
Peter Maydell
74e43b04b0 linux-user: Check lock_user result for ip_mreq_source sockopts
In do_setsockopt(), the code path for the options which take a struct
ip_mreq_source (IP_BLOCK_SOURCE, IP_UNBLOCK_SOURCE,
IP_ADD_SOURCE_MEMBERSHIP and IP_DROP_SOURCE_MEMBERSHIP) fails to
check the return value from lock_user().  Handle this in the usual
way by returning -TARGET_EFAULT.

(In practice this was probably harmless because we'd pass a NULL
pointer to setsockopt() and the kernel would then return EFAULT.)

Fixes: Coverity CID 1459987
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210809155424.30968-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-16 17:04:21 +02:00
Philippe Mathieu-Daudé
76d0042bb2 user: Remove cpu_get_pic_interrupt() stubs
cpu_get_pic_interrupt() is now unreachable from user-mode,
delete the unnecessary stubs.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-25-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14 12:00:21 -07:00
Peter Maydell
d0a7920eb4 linux-user: Drop unneeded includes from qemu.h
Trim down the #includes in qemu.h where we can, either by
dropping unneeded headers or by moving them to user-internals.h.

This includes deleting a couple of #includes that appear at
weird points midway through the header file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-10-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell
85b4fa0cd1 linux-user: Don't include gdbstub.h in qemu.h
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason
why it should do this; include it directly from the C files which require
it, and drop the include line in qemu.h.

(Note that several of the C files previously relying on this indirect
include were going out of their way to only include gdbstub.h conditionally
on not CONFIG_USER_ONLY!)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell
3b249d2661 linux-user: Split linux-user internals out of qemu.h
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).

Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
 * the definition of the TaskState struct
 * the user-access functions and macros
 * do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.

The addition of all the extra #include lines was done with
  sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell
a57e0c3657 linux-user: Split safe-syscall macro into its own header
Split the safe-syscall macro from qemu.h into a new safe-syscall.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell
5423e6d3a4 linux-user: Split mmap prototypes into user-mmap.h
Split out the mmap prototypes into a new header user-mmap.h
which we only include where required.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:45 +02:00
Peter Maydell
3ad0a76928 linux-user: Split loader-related prototypes into loader.h
Split guest-binary loader prototypes out into a new header
loader.h which we include only where required.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:44 +02:00
Peter Maydell
2113aed687 linux-user: Split signal-related prototypes into signal-common.h
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:44 +02:00
Peter Maydell
a44d57a3b9 linux-user: Split strace prototypes into strace.h
The functions implemented in strace.c are only used in a few files in
linux-user; split them out of qemu.h and into a new strace.h header
which we include in the places that need it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:44 +02:00
Peter Maydell
400b7f6d14 linux-user: Fix coding style nits in qemu.h
We're about to move a lot of the code in qemu.h out into different
header files; fix the coding style nits first so that checkpatch
is happy with the pure code-movement patches. This is mostly
block-comment style but also a few whitespace issues.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13 20:35:44 +02:00
Mahmoud Mandour
3a445acb49 plugins: allow plugin arguments to be passed directly
Passing arguments to plugins had to be done through "arg=<argname>".
This is redundant and introduces confusion especially when the argument
has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`).

This allows passing plugin arguments directly e.g:

    `-plugin plugin_name,argname=argvalue`

For now, passing arguments through "arg=" is still supports but outputs
a deprecation warning.

Also, this commit makes boolean arguments passed to plugins in the
`argname=on|off` form instead of the deprecated short-boolean form.

Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
2021-09-02 11:29:34 +01:00
Peter Maydell
e784807cd2 target/arm: Do hflags rebuild in cpsr_write()
Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags.  This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.

Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.

We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway.  For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.

This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.

This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
2021-08-26 17:02:01 +01:00
Ilya Leoshkevich
030912e01c linux-user/elfload: byteswap i386 registers when dumping core
Core dumps from emulating x86_64 on big-endian hosts contain incorrect
register values.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210803172013.148446-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-05 12:17:30 +02:00
Ilya Leoshkevich
0c40c18ecd linux-user: fix guest/host address mixup in i386 setup_rt_frame()
setup_rt_frame() passes siginfo and ucontext host addresses to guest
signal handlers, causing problems when e.g. emulating x86_64 on s390x.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803171858.148394-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-05 12:15:44 +02:00
Jonathan Albrecht
ccb5f2708f linux-user/s390x: signal with SIGFPE on compare-and-trap
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.

Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
 * Only raise SIGILL if DXC == 0
 * If DXC matches a non-simulated IEEE exception, raise SIGFPE with
   correct si_code
 * Raise SIGFPE with si_code == 0 for everything else

When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.

Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03 15:17:38 +02:00
Ilya Leoshkevich
54ba2161d8 target/s390x: Fix SIGILL and SIGFPE psw.addr reporting
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.

Fix by advancing psw.addr for these signals.

Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-08-03 15:17:32 +02:00
Richard Henderson
211364c21e linux-user/syscall: Remove unused variable from execve
From clang-13:
linux-user/syscall.c:8503:17: error: variable 'total_size' set but not used \
    [-Werror,-Wunused-but-set-variable]

Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-26 07:07:28 -10:00
Alex Bennée
f7e68c9c99 tcg/plugins: implement a qemu_plugin_user_exit helper
In user-mode emulation there is a small race between preexit_cleanup
and exit_group() which means we may end up calling instrumented
instructions before the kernel reaps child threads. To solve this we
implement a new helper which ensures the callbacks are flushed along
with any translations before we let the host do it's a thing.

While we are at it make the documentation of
qemu_plugin_register_atexit_cb clearer as to what the user can expect.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-21-alex.bennee@linaro.org>
2021-07-23 17:22:16 +01:00
Richard Henderson
9ef0c6d6a7 qemu/atomic: Add aligned_{int64,uint64}_t types
Use it to avoid some clang-12 -Watomic-alignment errors,
forcing some structures to be aligned and as a pointer when
we have ensured that the address is aligned.

Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21 07:45:38 -10:00
Laurent Vivier
2fa4ad3f90 linux-user: update syscall.tbl to Linux v5.13
Updated running scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210708215756.268805-4-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13 13:59:59 +02:00
Laurent Vivier
e2dcdcea23 linux-user, mips: update syscall-args-o32.c.inc to Linux v5.13
Updated running scripts/update-mips-syscall-args.sh

scripts/update-mips-syscall-args.sh has been updated to reflect
file directory changes in strace repository.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210708215756.268805-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13 13:59:59 +02:00
Laurent Vivier
3a2f19b7ee linux-user: update syscall_nr.h to Linux v5.13
Automatically generated using scripts/gensyscalls.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20210708215756.268805-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13 13:59:59 +02:00
Owen Anderson
c093364f4d fd-trans: Fix race condition on reallocation of the translation table.
The mapping from file-descriptors to translator functions is not guarded
on realloc which may cause invalid function pointers to be read from a
previously deallocated mapping.

Signed-off-by: Owen Anderson <oanderso@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210701221255.107976-1-oanderso@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:54:46 +02:00
Philippe Mathieu-Daudé
4f6a9f84f1 linux-user/syscall: Remove ERRNO_TABLE_SIZE check
Now than target_to_host_errno() always return an errno, we can
remove the unused and arbitrary ERRNO_TABLE_SIZE definition.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
3ffe3268ea linux-user: Simplify host <-> target errno conversion using macros
Convert the host_to_target_errno_table[] array to a switch
case to allow compiler optimizations (such noticing the identity
function when host and guest errnos match). Extract the errnos
list as to a new includible unit, using a generic macro. Remove
the code related to target_to_host_errno_table[] initialization.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-8-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
f317c0ee57 linux-user/mips: Move errno definitions to 'target_errno_defs.h'
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
366d1ef2e6 linux-user/hppa: Move errno definitions to 'target_errno_defs.h'
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-6-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
a4c7e27d47 linux-user/alpha: Move errno definitions to 'target_errno_defs.h'
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-5-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
8f968b6a24 linux-user: Extract target errno to 'target_errno_defs.h'
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
f007472331 linux-user/sparc: Rename target_errno.h -> target_errno_defs.h
We want to have one generic target_errno.h (API to access target
errno), and will add target errno definitions in target_errno_defs.h.
The sparc target already have its errnos in an header, simply rename
it.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
f7588fe906 linux-user/syscall: Fix RF-kill errno (typo in ERFKILL)
Affected targets: alpha, hppa, mips/64, sparc

Fixes: fe8ed7d579 ("linux-user: Handle ERFKILL and EHWPOISON")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12 21:53:35 +02:00
Philippe Mathieu-Daudé
c632ea1dd9 linux-user/syscall: Remove hardcoded tabs (code style)
We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210704183755.655002-12-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:34:21 +02:00
Philippe Mathieu-Daudé
04b853935f linux-user/alpha: Remove hardcoded tabs (code style)
We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:30:38 +02:00
Philippe Mathieu-Daudé
bc3359f739 linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:26:46 +02:00
Philippe Mathieu-Daudé
db10481c00 linux-user/hppa: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:26:03 +02:00
Philippe Mathieu-Daudé
f5f35cec5a linux-user/alpha: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:25:10 +02:00
Richard Henderson
a46955ff61 linux-user: Fix style problems in linuxload.c
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706234932.356913-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:22:35 +02:00
Andreas Schwab
7aa9fe3a52 linux-user: fill ppid field in /proc/self/stat
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmwnqnef5g.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:16:58 +02:00
Kito Cheng
cb46938c45 linux-user/elfload: Implement ELF_HWCAP for RISC-V
Set I, M, A, F, D and C bit for hwcap if misa is set.

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-07 21:14:47 +02:00
Peter Maydell
b22726abdf Linux-user pull request 20210621
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmDQchkSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748ERcP/1tXctiLD49fBUUT66u++Lrn4OKpmvor
 gVh0FQUIJoOI4af4mhiug2dvkJg61exrcIpIuEfhg1XpChJwtn2MqmEfePIzEocM
 ipYnNBwlQ14bqjylReCYKSWsZhK8/1wYzcgk5j1uvCdSxH+dkoJejiUeH6Wz6b1H
 4SQiJ49LEYulUC2zke6I9p/wpfKkE5kFn0LdT96bjP5Aa+GV4rKxLs+0y49oEjII
 x2vNAgiLiED0ndpUwTCLSnkulmxyrn80pum4EOm0jl62Joww7YR7J4fmN2sATtpe
 TxMab1BDls9PTnBrubjSQE1UCnDqPvyZsene4hv1nVyn+mBAHc+/Vja8e4YoJXh3
 s/7kuY+p8wdPiHYTdT2E4WCLTGo+LahNm2EN6OOgRUJJrBZBwU9T7U/aQOUsvawn
 VmVDHN/hLWQr32HvI05JlSie7lDXofu/dl81gcCL0A+OPEdrYgPYXh2t1AVBxeEa
 VqWxIo+wyGjg4ZoOlw51M0Lku8NCy1rENP78hxd9wQQH3QPk5jXgu/Fx+iddolzt
 dQHqB8W3rEa8c21RBs/ehPQNAbmsWbtqFbUfFzcAq/sfDmN5Z0g/9aTXYLJMVpBt
 qLaVh4sNJS+pK1BTCm+Fw2bOXXwV5E68fAbAgkJ4KhZvAuUnWizt9gRnByZCJtMt
 ECp9co7VFmPj
 =r2Ym
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-6.1-pull-request' into staging

Linux-user pull request 20210621

# gpg: Signature made Mon 21 Jun 2021 12:03:53 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-6.1-pull-request:
  linux-user: Use public sigev_notify_thread_id member if available
  linux-user: Fix incorrect use of feature-test-macros
  linux-user: Check for ieee128 fpbits in PPC64 HWCAP2 feature list
  tests/tcg/linux-test: Check that sigaction can query SIGKILL/SIGSTOP
  linux-user: Let sigaction query SIGKILL/SIGSTOP
  linux-user: Implement pivot_root
  linux-user/trace-events: fix minor typo in format string
  linux-user: Disable static assert involving __SIGRTMAX if it is missing
  linux-user: Set CF_PARALLEL when mapping shared memory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-22 16:07:53 +01:00
Richard Henderson
10b81272b3 linux-user/s390x: Save and restore psw.mask properly
At present, we're referencing env->psw.mask directly, which
fails to ensure that env->cc_op is incorporated or updated.
Use s390_cpu_{set_psw,get_psw_mask} to fix this.

Mirror the kernel's cleaning of the psw.mask in save_sigregs
and restore_sigregs.  Ignore PSW_MASK_RI for now, as qemu does
not support that.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21 08:48:21 +02:00
David Hildenbrand
da215c2394 linux-user: elf: s390x: Prepare for Vector enhancements facility
Let's check for S390_FEAT_VECTOR_ENH and set HWCAP_S390_VXRS_EXT
accordingly. Add all missing HWCAP defined in upstream Linux.

Cc: Laurent Vivier <laurent@vivier.eu>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-25-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21 08:48:21 +02:00
Michael Forney
96ff758c6e linux-user: Use public sigev_notify_thread_id member if available
_sigev_un._tid is an internal glibc field and is not available on
musl libc. The sigevent(7) man page and Linux UAPI headers both use
sigev_notify_thread_id as a public way to access this field.

musl libc supports this field since 1.2.2[0], and glibc plans to
add support as well[1][2].

If sigev_notify_thread_id is not available, fall back to _sigev_un._tid
as before.

[0] http://git.musl-libc.org/cgit/musl/commit/?id=7c71792e87691451f2a6b76348e83ad1889f1dcb
[1] https://www.openwall.com/lists/musl/2019/08/01/5
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27417

Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035556.7931-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-20 16:41:47 +02:00
Michael Forney
febf6fade6 linux-user: Fix incorrect use of feature-test-macros
The _POSIX_C_SOURCE and _XOPEN_SOURCE macros are used by the
application to indicate to libc which declarations it should expose.
Since qemu does not define them anywhere, it does not make sense
to check their value.

Instead, since the intent is to determine whether the host struct
stat supports the st_*tim fields, use the configure test result
which does exactly that.

Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035531.7871-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-20 16:40:11 +02:00
Khem Raj
8a589aeb27 linux-user: Check for ieee128 fpbits in PPC64 HWCAP2 feature list
glibc 2.34 is now checking for this in hwcaps at
runtime [1] and failing to run the binary if machine
does not support 128bit IEEE fp

Fixes
Fatal glibc error: CPU lacks float128 support (POWER 9 or later required)

[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=d337345ce145e23c5f3a956f349d924fdf54ce2d;hp=eb24865637a271ab7dad13190330105eab0d478d

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210614191729.2981488-1-raj.khem@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-20 16:36:40 +02:00
Ilya Leoshkevich
ee3500d33a linux-user: Let sigaction query SIGKILL/SIGSTOP
The kernel allows doing this, so let's allow this in qemu as well.
Valgrind relies on this.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210601145600.3131040-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-20 16:21:01 +02:00
YAMAMOTO Takashi
e10fbe8f34 linux-user: Implement pivot_root
Used by runc.

Signed-off-by: YAMAMOTO Takashi <yamamoto@midokura.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210531055019.10149-6-yamamoto@midokura.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-20 16:04:01 +02:00
Alex Bennée
0e88769704 linux-user/trace-events: fix minor typo in format string
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210614144245.17660-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-17 16:09:11 +02:00
Michael Forney
144bff0304 linux-user: Disable static assert involving __SIGRTMAX if it is missing
This check is to ensure that the loop in signal_table_init() from
SIGRTMIN to SIGRTMAX falls within the bounds of host_to_target_signal_table
(_NSIG). However, it is not critical, since _NSIG is already defined
to be the one larger than the largest signal supported by the system
(as specified in the upcoming POSIX revision[0]).

musl libc does not define __SIGRTMAX, so disabling this check when
it is missing fixes one of the last remaining errors when building
qemu.

[0] https://www.austingroupbugs.net/view.php?id=741

Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526190203.4255-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-15 08:38:18 +02:00
Richard Henderson
228168cbb7 linux-user: Set CF_PARALLEL when mapping shared memory
Signal the translator to use host atomic instructions for
guest operations, insofar as it is possible.  This is the
best we can do to allow the guest to interact atomically
with other processes.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/121
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210612060828.695332-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-15 08:28:56 +02:00
Richard Henderson
b0a0794a0f tcg: Re-order tcg_region_init vs tcg_prologue_init
Instead of delaying tcg_region_init until after tcg_prologue_init
is complete, do tcg_region_init first and let tcg_prologue_init
shrink the first region by the size of the generated prologue.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-11 09:26:28 -07:00
Philippe Mathieu-Daudé
180d4ef3ad linux-user/syscall: Constify bitmask_transtbl fcntl/mmap flags_tlb[]
Keep bitmask_transtbl in .rodata by marking the arrays const.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210517055243.830491-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-05 21:13:29 +02:00
Richard Henderson
8da5f1dbb0 softfloat: Introduce Floatx80RoundPrec
Use an enumeration instead of raw 32/64/80 values.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-03 14:04:02 -07:00
Richard Henderson
6c47a9053c linux-user/aarch64: Enable hwcap bits for bfloat16
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-03 16:43:26 +01:00
Stefano Garzarella
d0fb9657a3 docs: fix references to docs/devel/tracing.rst
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

  sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-06-02 06:51:09 +02:00
Richard Henderson
cdc8d8b273 linux-user/aarch64: Enable hwcap bits for sve2 and related extensions
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-92-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-25 16:01:44 +01:00
Richard Henderson
6086c751c3 target/ppc: Replace POWERPC_EXCP_BRANCH with DISAS_NORETURN
The translation of branch instructions always results in exit from
the TB. Remove the synthetic "exception" after no more uses.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:29 +10:00
Richard Henderson
d736de8ff6 target/ppc: Replace POWERPC_EXCP_STOP with DISAS_EXIT_UPDATE
Remove the synthetic "exception" after no more uses.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-19 10:30:29 +10:00
Ilya Leoshkevich
4a1e8931ec linux-user/elfload: add s390x core dumping support
Provide the following definitions required by the common code:

* ELF_NREG: with the value of sizeof(s390_regs) / sizeof(long).
* target_elf_gregset_t: define it like all the other arches do.
* elf_core_copy_regs(): similar to kernel's s390_regs_get().
* USE_ELF_CORE_DUMP.
* ELF_EXEC_PAGESIZE.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205608.22587-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:46 +02:00
Ilya Leoshkevich
5f779a3a26 linux-user/elfload: fix filling psinfo->pr_psargs
The current code dumps the memory between arg_start and arg_end,
which contains the argv pointers. This results in the

    Core was generated by `<garbage>`

message when opening the core file in GDB. This is because the code is
supposed to dump the actual arg strings. Fix by using arg_strings and
env_strings instead of arg_start and arg_end.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205814.22821-1-iii@linux.ibm.com>
[lv: add missing braces]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:46 +02:00
Richard Henderson
fb80439b1e linux-user: Tidy TARGET_NR_rt_sigaction
Initialize variables instead of elses.
Use an else instead of a goto.
Add braces.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210422230227.314751-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:46 +02:00
Richard Henderson
02d0de101c linux-user/alpha: Share code for TARGET_NR_sigaction
There's no longer a difference between the alpha code and
the generic code.

There is a type difference in target_old_sigaction.sa_flags,
which can be resolved with a very much smaller ifdef, which
allows us to finish sharing the target_sigaction definition.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:46 +02:00
Richard Henderson
0f6f99032e linux-user/alpha: Define TARGET_ARCH_HAS_KA_RESTORER
This means that we can share the TARGET_NR_rt_sigaction code,
and the target_rt_sigaction structure is unused.  Untangling
the ifdefs so that target_sigaction can be shared will wait
until the next patch.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:45 +02:00
Richard Henderson
ca192277db linux-user: Honor TARGET_ARCH_HAS_SA_RESTORER in do_syscall
Do not access a field that may not be present.  This will
become an issue when sharing more code in the next patch.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210422230227.314751-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:45 +02:00
Richard Henderson
02fb28e8ef linux-user: Pass ka_restorer to do_sigaction
The value of ka_restorer needs to be saved in sigact_table.
At the moment, the attempt to save it in do_syscall is
improperly clobbering user memory.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-4-richard.henderson@linaro.org>
[lv: remove tab]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:10:32 +02:00
Richard Henderson
f20a9ca6d0 linux-user/alpha: Rename the sigaction restorer field
Use ka_restorer, in line with TARGET_ARCH_HAS_KA_RESTORER
vs TARGET_ARCH_HAS_SA_RESTORER, since Alpha passes this
field as a syscall argument.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:58 +02:00
Richard Henderson
8f5141a9e1 linux-user/alpha: Fix rt sigframe return
We incorrectly used the offset of the non-rt sigframe.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210422230227.314751-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:58 +02:00
Daniel P. Berrangé
68af19ad72 linux-user: use GDateTime for formatting timestamp for core file
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210505103702.521457-7-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:58 +02:00
Giuseppe Musacchio
0fa259dd79 linux-user: Fix erroneous conversion in copy_file_range
The implicit cast from abi_long to size_t may introduce an intermediate
unwanted sign-extension of the value for 32bit targets running on 64bit
hosts.

Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210503174159.54302-3-thatlemon@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:58 +02:00
Giuseppe Musacchio
db3221454d linux-user: Add copy_file_range to strace.list
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210503174159.54302-2-thatlemon@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:58 +02:00
Richard Henderson
0b16f04c1f linux-user/s390x: Handle vector regs in signal stack
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-16-richard.henderson@linaro.org>
[lv: fix indentation]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-18 07:09:36 +02:00
Richard Henderson
79d6f2baa4 linux-user/s390x: Clean up signal.c
Reorder the function bodies to correspond to the kernel source.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
9e0fb648b2 linux-user/s390x: Add build asserts for sigset sizes
At point of usage, it's not immediately obvious that
we don't need a loop to copy these arrays.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
ac1a92ec8f linux-user/s390x: Fix frame_addr corruption in setup_frame
The original value of frame_addr is still required for
its use in the call to unlock_user_struct below.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
6c18757dc5 linux-user/s390x: Add stub sigframe argument for last_break
In order to properly present these arguments, we need to add
code to target/s390x to record LowCore parameters for user-only.

But in the meantime, at least zero the missing last_break
argument, and fixup the comment style in the vicinity.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
7e5355578e linux-user/s390x: Set psw.mask properly for the signal handler
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA}
in the kernel source.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
2080734880 linux-user/s390x: Clean up single-use gotos in signal.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
82839490e4 linux-user/s390x: Tidy save_sigregs
The "save" routines copied from the kernel, which are currently
commented out, are unnecessary in qemu.  We can copy from env
where the kernel needs special instructions.  Fix comment style.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
bb17fc5b47 linux-user/s390x: Use tswap_sigset in setup_rt_frame
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
4e4a08200b linux-user/s390x: Fix sigcontext sregs value
Using the host address of &frame->sregs is incorrect.
We need the guest address.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
bd45be9f5f linux-user/s390x: Fix trace in restore_regs
Directly reading sc->regs.psw.addr misses the bswap
that may be performed by __get_user.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
e6f960fcbe linux-user/s390x: Remove restore_sigregs return value
The function cannot fail.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
915c69dc02 linux-user/s390x: Remove PSW_ADDR_AMODE
This is an unnecessary complication since we only
support 64-bit mode.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
cb1f198296 linux-user/s390x: Use uint16_t for signal retcode
Using the right type simplifies the frame setup.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
5d79bd111f linux-user/s390x: Fix sigframe types
Noticed via gitlab clang-user job:

  TEST    signals on s390x
../linux-user/s390x/signal.c:258:9: runtime error: \
  1.84467e+19 is outside the range of representable values of \
  type 'unsigned long'

Which points to the fact that we were performing a double-to-uint64_t
conversion while storing the fp registers, instead of just copying
the data across.

Turns out there are several errors:

target_ulong is the size of the target register, whereas abi_ulong
is the target 'unsigned long' type.  Not a big deal here, since we
only support 64-bit s390x, but not correct either.

In target_sigcontext and target ucontext, we used a host pointer
instead of a target pointer, aka abi_ulong.

Fixing this allows the removal of a cast to __put_user.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:44:38 +02:00
Richard Henderson
bb3347f80f linux-user/sparc: Implement sparc64 rt signals
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:43:23 +02:00
Richard Henderson
e76f2f847d linux-user/sparc: Implement sparc32 rt signals
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15 21:43:23 +02:00