Adding the fw_cfg cmd line support patch by
Gabriel L. Somlo hits the limit.
Fix this by making the array larger.
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
The new bitmap_test_and_clear_atomic() function clears a range and
returns whether or not the bits were set.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1417519399-3166-3-git-send-email-stefanha@redhat.com>
[Test before xchg; then a full barrier is needed at the end just like
in the previous patch. The barrier can be avoided if we did at least
one xchg. - Paolo]
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use atomic_or() for atomic bitmaps where several threads may set bits at
the same time. This avoids the race condition between threads loading
an element, bitwise ORing, and then storing the element.
When setting all bits in a word we can avoid atomic ops and instead just
use an smp_mb() at the end.
Most bitmap users don't need atomicity so introduce new functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1417519399-3166-2-git-send-email-stefanha@redhat.com>
[Avoid barrier in the single word case, use full barrier instead of write.
- Paolo]
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'socket_optslist' structure does not contain the 'localaddr' and
'localport' options that are parsed in case you are creating a
'connect' type UDP character device.
I've noticed it happening after commit f43e47dbf6
made qemu abort() after seeing the invalid option.
A minimal reproducer for the case is:
$ qemu-system-x86_64 -chardev udp,id=charrng0,host=127.0.0.1,port=1234,localaddr=,localport=1234
qemu-system-x86_64: -chardev udp,id=charrng0,host=127.0.0.1,port=1234,localaddr=,localport=1234: Invalid parameter 'localaddr'
Aborted (core dumped)
Prior to the commit mentioned above the error would be printed but the
value for localaddr and localport was simply ignored. I did not go
through the code to find out when it was broken.
Add the two fields so that the options can again be parsed correctly and
qemu doesn't abort().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1220252
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The qemu_read_password() method looks for \r to terminate the
reading of the a password. This is what will be seen when
reading the password from a TTY. When scripting though, it is
useful to be able to send the password via a pipe, in which
case we must look for \n to terminate password input.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-img.c file has a read_password() method impl that is
used to prompt for passwords on the console, with impls for
POSIX and Windows. This will be needed by qemu-io.c too, so
move it into the QEMU osdep/oslib files where it can be shared
without code duplication
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Consider this case:
$ ls -ld ~/root-owned/
drwx--x--x. 2 root root 4096 Apr 29 12:55 /home/crobinso/root-owned/
$ ls -l ~/root-owned/foo.sock
-rwxrwxrwx. 1 crobinso crobinso 0 Apr 29 12:55 /home/crobinso/root-owned/foo.sock
$ qemu-system-x86_64 -vnc unix:~/root-owned/foo.sock
qemu-system-x86_64: -vnc unix:/home/crobinso/root-owned/foo.sock: Failed to start VNC server: Failed to bind socket to /home/crobinso/root-owned/foo.sock: Address already in use
...which is techinically true, but the real error is that we failed to
unlink. So report it.
This may seem pathological but it's a real possibility via libvirt.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Delete the unused functions qemu_signalfd_available(),
qemu_send_full() and qemu_recv_full().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We add a bitmap merge operation to assist in error cases
where we wish to combine two bitmaps together.
This is algorithmically O(bits) provided HBITMAP_LEVELS remains
constant. For a full bitmap on a 64bit machine:
sum(bits/64^k, k, 0, HBITMAP_LEVELS) ~= 1.01587 * bits
We may be able to improve running speed for particularly sparse
bitmaps by using iterators, but the running time for dense maps
will be worse.
We present the simpler solution first, and we can refine it later
if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a convenience: between incremental backups, bitmap migrations
and bitmap persistence we seem to need to recalculate these a lot.
Because the lengths are a little bit-twiddly, let's just solidly
cache them and be done with it.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently it is impossible to set an option in a config file to an empty
string, because the parser matches only lines containing non-empty
strings between double-quotes.
As sscanf() "[" conversion specifier only matches non-empty strings, add
a special case for empty strings.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 49d2e64 (machine: remove qemu_machine_opts global list)
made machine options specific to machine sub-type, leaving
the qemu_machine_opts desc array empty. Sadly this is the place
qmp_query_command_line_options is looking for supported options.
As a fix for for 2.3 the machine_qemu_opts (the generic ones)
are restored only for qemu-config scope.
We need to find a better fix for 2.4.
Reported-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <1427906841-1576-1-git-send-email-marcel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread. There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec. Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.
Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.
This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.
User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.
Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And while at it, replace tabs by eight spaces in this function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <1424887718-10800-2-git-send-email-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After forking, only the calling thread is duplicated in the child process.
The call_rcu thread has to be recreated in the child. Exploit the fact
that only one thread exists (same as when constructors run), and just redo
the entire initialization to ensure the threads are in the proper state.
The only additional things to do are emptying the list of threads
registered with RCU, and unlocking the lock that was taken in the prepare
callback (implementations are allowed to fail pthread_mutex_init()
if the mutex is still locked).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PTHREAD_MUTEX_ERRORCHECK is completely broken with respect to fork.
The way to safely do fork is to bring all threads to a quiescent
state by acquiring locks (either in callers---as we do for the
iothread mutex---or using pthread_atfork's prepare callbacks)
and then release them in the child.
The problem is that releasing error-checking locks in the child
fails under glibc with EPERM, because the mutex stores a different
owner tid than the duplicated thread in the child process. We
could make it work for locks acquired via pthread_atfork, by
recreating the mutex in the child instead of unlocking it
(we know that there are no other threads that could have taken
the mutex; but when the lock is acquired in fork's caller
that would not be possible.
The simplest solution is just to forgo error checking.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gcc reports this warning with -Wclobbered:
util/oslib-posix.c: In function ‘os_mem_prealloc’:
util/oslib-posix.c:374:49: error: argument ‘memory’ might be clobbered by
‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Fix this and simplify the code by using an existing macro.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Avoid truncation of a 64-bit long to a 32-bit int, and check for errno
(especially ERANGE).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5gJq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150304-1' into staging
misc spice/qxl fixes.
# gpg: Signature made Wed Mar 4 13:57:42 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-20150304-1:
hmp: info spice: take out webdav
hmp: info spice: Show string channel name
qxl: drop update_displaychangelistener call for secondary qxl devices
vga: refactor vram_size clamping and rounding
qxl: refactor rounding up to a nearest power of 2
spice: fix invalid memory access to vga.vram
qxl: document minimal video memory for new modes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have pow2floor, mirror it and use instead of a function with
similar results (same in used domain), to clarify our intent.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't convert numbers or bools to strings for use with qemu_opt_set(),
simply use qemu_opt_set_number() or qemu_opt_set_bool() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since I'm touching qemu_opts_parse() anyway, write a function comment
for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU48JYAAoJEDNTyc7xCLWEK+AH/R6b+ycKU3LKG3ZKcGE/vV45
szTtE6SKRQmANs1GwQy2qMubBtEFnmfsJSiWQNmPArmP20rZK0Yyy4PaLm7UrTYs
mpfNee6mlc8PnaMjdzlgBJInwJIx3hgV0UNl4e1h+DM6Xe6GqC6NGc8vdfuIW6is
zHCtH5mAId7ykC03KCVAtTTWFJlJyujrytsNd2jP3zkZlwcCOS08JG1U0SMaBjTq
WCZAxbDPuODUqrwimevST1IFstg50cnsW9wq2oLLCp/ZnsYtCdeSZQGIVDkjL8zR
stJRDKukY4ByU0zLjcDrBpdzTwOb6ndZp929ti6y+3dQUX3oTOhqgE8JT/kR+Qo=
=KpkU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag' into staging
tag for qga-pull-2015-02-16-v2
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
# gpg: Signature made Tue Feb 17 22:36:08 2015 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag:
qemu-ga-win: Fail loudly on bare 'set-time'
qga: add memory block command that unsupported
qga: implement qmp_guest_get_memory_block_info() for Linux with sysfs
qga: implement qmp_guest_set_memory_blocks() for Linux with sysfs
qga: implement qmp_guest_get_memory_blocks() for Linux with sysfs
qga: introduce three guest memory block commmands with stubs
qga: implement file commands for Windows guest
guest agent: guest-file-open: refactoring
utils: drop strtok_r from envlist_parse
qga: add guest-set-user-password command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I've typed error_report("%s", error_get_pretty(ERR)) too many times
already, and I've fixed too many instances of qerror_report_err(ERR)
to error_report("%s", error_get_pretty(ERR)) as well. Capture the
pattern in a convenience function.
Since it's almost invariably followed by error_free(), stuff that into
the convenience function as well.
The next patch will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The problem is that mingw 4.9.1 fails to compile the code with the
following warning:
/mingw/include/string.h:88:9: note: previous declaration of 'strtok_r'
was here
char *strtok_r(char * __restrict__ _Str,
const char * __restrict__ _Delim,
char ** __restrict__ __last);
/include/sysemu/os-win32.h:83:7: warning: redundant redeclaration of
'strtok_r' [-Wredundant-decls]
char *strtok_r(char *str, const char *delim, char **saveptr);
The problem is that compiles just fine on previous versions of mingw.
Compiler version check here is not a good idea. Though fortunately
strtok_r is used only once in the code and we could simply rewrite
the code without it.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This needs to go away sooner or later, but one complication is the
complex VFIO data structures that are modified in instance_finalize.
Take a shortcut for now.
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always process them within a short time. Even though waiting a little
is useful, it is not okay to delay e.g. qemu_opts_del forever.
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
uri_resolve_relative() calls strcmp(bas->path, ref->path). However,
either argument could be null! Evidence: the code checks for null
after the comparison. Spotted by Coverity.
I suspect this was screwed up when we stole the code from libxml2.
There the conditional reads
xmlStrEqual((xmlChar *)bas->path, (xmlChar *)ref->path)
with
int
xmlStrEqual(const xmlChar *str1, const xmlChar *str2) {
if (str1 == str2) return(1);
if (str1 == NULL) return(0);
if (str2 == NULL) return(0);
do {
if (*str1++ != *str2) return(0);
} while (*str2++);
return(1);
}
Fix by replicating libxml2's logic faithfully.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Spotted by Coverity with preview checker ALLOC_FREE_MISMATCH enabled
and my "coverity: Model g_free() isn't necessarily free()" model patch
applied.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_opt_value() takes a write-only buffer, so zeroing it is pointless.
We don't do it elsewhere, either.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The size of the stack allocated host[] array didn't account for the
terminating '\0' byte that sscanf() writes. Fix the array size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
bits is checked to be 128, 192 or 256 at the beginning of the function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Coverity complains about not checking the returned value of mkstemp. While
at it, also improve error checking for snprintf, and refine error messages
in general.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Asynchronous callbacks provided by call_rcu are particularly important
for QEMU, because the BQL makes it hard to use synchronize_rcu.
In addition, the current RCU implementation is not particularly friendly
to multiple concurrent synchronize_rcu callers, making call_rcu even
more important.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes a (mangled) copy of the liburcu code. The main changes
are: 1) removing dependencies on many other header files in liburcu; 2)
removing for simplicity the tentative busy waiting in synchronize_rcu,
which has limited performance effects; 3) replacing futexes in
synchronize_rcu with QemuEvents for Win32 portability. The API is
the same as liburcu, so it should be possible in the future to require
liburcu on POSIX systems for example and use our copy only on Windows.
Among the various versions available I chose urcu-mb, which is the
least invasive implementation even though it does not have the
fastest rcu_read_{lock,unlock} implementation. The urcu flavor can
be changed later, after benchmarking.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This had a possible deadlock that was visible with rcutorture.
qemu_event_set qemu_event_wait
----------------------------------------------------------------
cmpxchg reads FREE, writes BUSY
futex_wait: pthread_mutex_lock
futex_wait: value == BUSY
xchg reads BUSY, writes SET
futex_wake: pthread_cond_broadcast
futex_wait: pthread_cond_wait
<deadlock>
The fix is simply to avoid condvar tricks and do the obvious locking
around pthread_cond_broadcast:
qemu_event_set qemu_event_wait
----------------------------------------------------------------
cmpxchg reads FREE, writes BUSY
futex_wait: pthread_mutex_lock
futex_wait: value == BUSY
xchg reads BUSY, writes SET
futex_wake: pthread_mutex_lock
(blocks)
futex_wait: pthread_cond_wait
(mutex unlocked)
futex_wake: pthread_cond_broadcast
futex_wake: pthread_mutex_unlock
futex_wait: pthread_mutex_unlock
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Destructors are the main additional feature of pthread TLS compared
to __thread. If we were using C++ (hint, hint!) we could have used
thread-local objects with a destructor. Since we are not, instead,
we add a simple Notifier-based API.
Note that the notifier must be per-thread as well. We can add a
global list as well later, perhaps.
The Win32 implementation has some complications because a) detached
threads used not to have a QemuThreadData; b) the main thread does
not go through win32_start_routine, so we have to use atexit too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change the message printing code to output a separator for each option
string before it instead of after, then we don't one more extra ' ' in
the end.
To update qemu-iotests output files, most of the times one would just
copy the *.out.bad to *.out. With this change we will not have the
space disliked by checkpatch.pl.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If 'i != index' for all acl->entries, variable
entry leaks the storage it points to.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when the preallocating guest memory process fails, a not
so helpful error message is printed out:
# virsh start migt10
error: Failed to start domain migt10
error: internal error: process exited while connecting to monitor:
os_mem_prealloc: failed to preallocate pages
From the error message it's not clear at the first glance where the
problem lies. However, changing the error message might give users a
clue.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IDs have long spread beyond QemuOpts: not everything with an ID
necessarily goes through QemuOpts. Commit 9aebf3b is about such a
case: block layer names are meant to be well-formed IDs, but some of
them don't go through QemuOpts, and thus weren't checked. The commit
fixed that the straightforward way: rename the internal QemuOpts
helper id_wellformed() to qemu_opts_id_wellformed() and give it
external linkage.
Instead of using it directly in block.c, the commit adds wrapper
bdrv_is_valid_name(), probably to hide the connection to QemuOpts.
Go one logical step further: emancipate IDs from QemuOpts. Rename the
function back to id_wellformed(), and put it in another file. While
there, clean up its value to bool. Peel off the bdrv_is_valid_name()
wrapper.
[Replaced stray return 0 with return false to match bool returns used
elsewhere in id_wellformed().
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments. This trickiness has become pointless. Clean
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The device_name of a BlockDriverState is currently checked because it is
always used as a QemuOpts ID and qemu_opts_create() checks whether such
IDs are wellformed.
node-name is supposed to share the same namespace, but it isn't checked
currently. This patch adds explicit checks both for device_name and
node-name so that the same rules will still apply even if QemuOpts won't
be used any more at some point.
qemu-img used to use names with spaces in them, which isn't allowed any
more. Replace them with underscores.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently you can specify whether you want a UDP chardev backend
to be IPv4 or IPv6 using the ipv4 or ipv6 options if you use the
QemuOpts parsing code in inet_dgram_opts(). However the QMP struct
parsing code in socket_dgram() doesn't provide this flexibility
(which in turn prevents us from converting the UDP backend handling
to the new style QAPI framework).
Use the existing inet_addr_to_opts() function to convert the
remote->inet address to option strings; this handles ipv4 and
ipv6 flags as well as host and port. (It will also convert any
'to' specification, which is harmless as it is ignored in this
context.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-3-git-send-email-peter.maydell@linaro.org
So that we won't have an empty getauxval.o which is disliked by ranlib.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this file, we don't check the return value of malloc/strdup/realloc which may fail.
Instead of using these routines, we use the GLib memory APIs g_malloc/g_strdup/g_realloc.
They will exit on allocation failure, so there is no need to test for failure,
which would be fine for setup.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This function returns NULL instead of aborting when an allocation fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The current implementation depends on a configure-time generated list of
block modules. When any of them is absent, module_load() emits a warning.
This is suboptimal because extracting code to modules was mainly done to
allow separate packaging of modules with intrusive dependencies. Absence
of optional packages then leads to absence of modules and an error
message, which users may recognize as new and report as error.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file path is not used for error reporting, so we can free it
directly after use.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=YxHy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc2 (v2)
# gpg: Signature made Mon 14 Jul 2014 11:04:12 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
ide: Treat read/write beyond end as invalid
virtio-blk: Treat read/write beyond end as invalid
virtio-blk: Bypass error action and I/O accounting on invalid r/w
virtio-blk: Factor common checks out of virtio_blk_handle_read/write()
dma-helpers: Fix too long qiov
qtest: fix vhost-user-test compilation with old GLib
tests: Fix unterminated string output visitor enum human string
AioContext: do not rely on aio_poll(ctx, true) result to end a loop
virtio-blk: embed VirtQueueElement in VirtIOBlockReq
virtio-blk: avoid g_slice_new0() for VirtIOBlockReq and VirtQueueElement
dataplane: do not free VirtQueueElement in vring_push()
virtio-blk: avoid dataplane VirtIOBlockReq early free
block: Assert qiov length matches request length
qed: Make qiov match request size until backing file EOF
qcow2: Make qiov match request size until backing file EOF
block: Make qiov match the request size until EOF
AioContext: speed up aio_notify
test-aio: fix GSource-based timer test
block: drop aio functions that operate on the main AioContext
block: prefer aio_poll to qemu_aio_wait
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the size of the scatter/gather list isn't a multiple of 512, the
number of sectors for the block layer request is rounded down, resulting
in a qiov that doesn't match the request length. Truncate the qiov to the
new length of the request.
This fixes the IDE qtest case /x86_64/ide/bmdma/short_prdt.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Newer versions of gcc report a warning (or an error with -Werror) when
compiler option -Wclobbered (or -Wextra) is active:
util/oslib-posix.c:372:12: error:
variable ‘hpagesize’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
The rewritten code fixes this warning: variable 'hpagesize' is now set and
used in a block without any call of sigsetjmp or similar functions.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running a libvirt test suite I've noticed the qemu-img is
crashing occasionally. Tracing the problem down led me to the
following valgrind output:
qemu.git $ valgrind -q ./qemu-img create -f qed -obacking_file=/dev/null,backing_fmt=raw qed
==14881== Invalid write of size 8
==14881== at 0x1D263F: qemu_opts_create (qemu-option.c:692)
==14881== by 0x130782: bdrv_img_create (block.c:5531)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881== Address 0x11fedd38 is 24 bytes inside a block of size 232 free'd
==14881== at 0x4C2CA5E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14881== by 0x592D35E: g_realloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==14881== by 0x1D38D8: qemu_opts_append (qemu-option.c:1129)
==14881== by 0x13075E: bdrv_img_create (block.c:5528)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881==
Formatting 'qed', fmt=qed size=0 backing_file='/dev/null' backing_fmt='raw' cluster_size=65536
==14881== Invalid write of size 8
==14881== at 0x1D28BE: qemu_opts_del (qemu-option.c:750)
==14881== by 0x130BF3: bdrv_img_create (block.c:5638)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881== Address 0x11fedd38 is 24 bytes inside a block of size 232 free'd
==14881== at 0x4C2CA5E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14881== by 0x592D35E: g_realloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==14881== by 0x1D38D8: qemu_opts_append (qemu-option.c:1129)
==14881== by 0x13075E: bdrv_img_create (block.c:5528)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881==
The problem is apparently in the qemu_opts_append(). Well, if it
gets called twice or more. On the first call, when @dst is NULL
some initialization is done during which @dst->head list gets
initialized. The list is initialized in a way, so that the list
tail points at the list head. However, the next time
qemu_opts_append() is called for new options to be added,
g_realloc() may move @dst to a new address making the old list tail
point at an invalid address. If that's the case, we must update the
list pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.
Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Some places will call bdrv_create_file(filename, NULL, &local_err), where
opts is NULL. Check NULL in qemu_opt_get and qemu_opt_get_*_del functions,
to avoid extra effort of checking opts before calling them every time.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
=Oxdt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (109 commits)
numa: use RAM_ADDR_FMT with ram_addr_t
qapi/string-output-visitor: fix bugs
tests: simplify code
qapi: fix input visitor bugs
acpi: rephrase comment
qmp: add ACPI_DEVICE_OST event handling
qmp: add query-acpi-ospm-status command
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
acpi: introduce TYPE_ACPI_DEVICE_IF interface
qmp: add query-memory-devices command
numa: handle mmaped memory allocation failure correctly
pc: acpi: do not hardcode preprocessor
qmp: clean out whitespace
qdev: recursively unrealize devices when unrealizing bus
qdev: reorganize error reporting in bus_set_realized
qapi: fix build on glib < 2.28
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
tests: fix memory leak in test of string input visitor
hmp: add info memdev
...
Conflicts:
include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So that backends can use it.
Since we need the page size for efficiency, move code to compute it
out of translate-all.c and into util/oslib-win32.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/bonzini/scsi-next:
virtio-scsi: define dummy handle_output for vhost-scsi vqs
block/iscsi: drop obsolete pointers from iscsi_co_writev
block/iscsi: fix init value for iTask->retries
block/iscsi: bump libiscsi requirement to 1.9.0
virtio-scsi: add support for the any_layout feature
virtio-scsi: introduce virtio_scsi_complete_cmd_req
virtio-scsi: prepare sense data handling for any_layout
virtio-scsi: add extra argument and return type to qemu_sgl_concat
virtio-scsi: add target swap for VirtIOSCSICtrlTMFReq fields
virtio-scsi: start preparing for any_layout
util: add return value to qemu_iovec_concat_iov
megasas: use PCI DMA API
scsi: Print command name in debug
scsi-disk: fix bug in scsi_block_new_request() introduced by commit 137745c
scsi-disk.c: Fix compilation with -DDEBUG_SCSI
block/iscsi: use 16 byte CDBs only when necessary
block/iscsi: fix potential segfault on early callback
block/iscsi: handle BUSY condition
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 5a007547df tried to fix a
performance degradation caused by bad handling of small timeouts
in the original implementation of g_poll.
Since that commit, hard disk I/O no longer works.
Instead of rewriting the g_poll implementation, this patch simply copies
the original code (released under LGPL) from latest glib and only modifies
it where needed (see comments in the code). URL of the original code:
https://git.gnome.org/browse/glib/tree/glib/gpoll.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1401291744-14314-1-git-send-email-sw@weilnetz.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hi5L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the table implementation of the Advanced Encryption Standard (AES)
InvMixColumns transformation.
The patch is intentionally asymmetrical -- the MixColumns table is not added because
there is no known use for it at this time.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds tables that implement the Advanced Encryption Standard (AES) ShiftRows
and InvShiftRows transformations. These are commonly used in instruction models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds tables for the S-Box and InvS-Box transformations commonly used by various
Advanced Encription Standard (AES) instruction models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now only qemu_opts_append uses 'allocated' to indicate free memory.
For this function only, we can also let result list's (const char *)
members point to input list's members, only if the input list has
longer lifetime than result list. In current code, that is true.
So, we can remove the 'allocated' member from QemuOptsList definition
to keep code clean.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Export qemu_opt_find for qcow2 driver using it.
After replacing QEMUOptionParameter with QemuOpts, qcow2 driver will
use qemu_opt_find to judge if an option is explicitly set, to replace
the usage of .assigned in QEMUOptionParameter.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To simplify later using of qemu_opts_del, accept NULL input.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For later merge .create_opts of drv and proto_drv in qemu-img commands.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add two temp conversion functions between QEMUOptionParameter to QemuOpts,
so that next patch can use it. It will simplify later patch for easier
review. And will be finally removed after all backend drivers switch to
QemuOpts.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
print_option_help takes QEMUOptionParameter as parameter, add
qemu_opts_print_help to take QemuOptsList as parameter for later
replace work.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_opt_get_del, qemu_opt_get_bool_del, qemu_opt_get_number_del and
qemu_opt_get_size_del to replace the same handling of QEMUOptionParameter
(get and delete).
Several drivers are coded to parse a known subset of options, then
remove them from the list before handing all remaining options to a
second driver for further option processing. get_*_del makes it easier
to retrieve a known option (or its default) and remove it from the list
all in one action.
Share common helper function:
For qemu_opt_get_bool/size/number, they and their get_*_del counterpart
could share most of the code except whether or not deleting the opt from
option list, so generate common helper functions.
For qemu_opt_get and qemu_opt_get_del, keep code duplication, since
1. qemu_opt_get_del returns malloc'd memory while qemu_opt_get returns
in-place memory
2. qemu_opt_get_del returns (char *), qemu_opt_get returns (const char *),
and could not change to (char *), since in one case, it will return
desc->def_value_str, which is (const char *).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In later patch, qemu_opt_get_del functions will be added, they will
first get the option value, then call qemu_opt_del to remove the option
from opt list. To prepare for that purpose, move qemu_opt_del ahead first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_opt_del() already assumes that all QemuOpt instances contain
malloc'd name and value; but it had to cast away const because
opts_start_struct() was doing its own thing and using static storage
instead. By using the correct type and malloced strings everywhere, the
usage of this struct becomes clearer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change qapi interfaces to output the newly added def_value_str when querying
command line options.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add def_value_str (default value) to QemuOptDesc, to replace function of the
default value in QEMUOptionParameter.
Improve qemu_opts_get_* functions: if find opt, return opt->str; otherwise,
if desc->def_value_str is set, return desc->def_value_str; otherwise, return
input defval.
Improve qemu_opts_print: if option is set, print opt->str; otherwise, if
desc->def_value_str is set, print it.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently this function is not used anywhere. In later patches, it will
replace print_option_parameters. To avoid print info changes, change
qemu_opts_print from fprintf stderr to printf, and remove last printf.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't use atoi() function which doesn't detect errors, switch to
strtol and error out on failures. Also add a range check while
being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
There is no need to clutter the user's choices with repeating the same value
multiple times.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Include termios.h as POSIX fallback when not glibc, bsd or solaris.
POSIX says that termios.h should define struct termios and TCAFLUSH.
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/termios.h.html
This fixes the following compile errors with musl libc:
util/qemu-openpty.c: In function 'qemu_openpty_raw':
util/qemu-openpty.c:112:20: error: storage size of 'tty' isn't known
struct termios tty;
^
...
util/qemu-openpty.c:128:24: error: 'TCSAFLUSH' undeclared (first use in this function)
tcsetattr(*aslave, TCSAFLUSH, &tty);
^
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function popcountl() in hbitmap.c is effectively a reimplementation
of what host-utils.h provides as ctpopl(). Use ctpopl() directly; this fixes
a failure to compile on NetBSD (whose strings.h erroneously exposes a
system popcountl() which clashes with this one).
Reported-by: Martin Husemann <martin@duskware.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'on' variable is never used, and 'off' is only used
if IPV6_V6ONLY is defined; delete 'on' and move 'off' to
the point where it is used. This avoids warnings from
clang 3.4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Block I/O throttling uses timers and currently always adds them to the
main loop. Throttling will break if bdrv_set_aio_context() is used to
move a BlockDriverState to a different AioContext.
This patch adds throttle_detach/attach_aio_context() interfaces so the
throttling timers and uses them to move timers to the new AioContext.
Note that bdrv_set_aio_context() already drains all requests so we're
sure no throttled requests are pending.
The test cases need to be updated since the throttle_init() interface
has changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Separate the search for a working addrinfo from the code that does
something with it. Makes for a clearer search loop.
Use a local Error * to simplify resetting the error in the search
loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTbSUxAAoJEJykq7OBq3PIh+EH/1pfLspteDS4hlTZZ8D5r+iN
AEmemUQpMDGawLHQSJcK3xgNWSz5ei3HxLuXz9+5f3ZhP+ECsrTnf+60uzHkdd6j
axG1viAHEBtX0ZumTdo0XY6FtCZmCRqRz8nfqxs1Q3O7UtZaDqLf1m/BNguw5K8G
VHtuPAVidTWcS6QT6CoEdJ4coA3F8ZuK1viTU2nsBE28lqB99ZG9Zkr2pOCXXra2
5d6OIZYyc+PNW2HuNZTmma41aVoYJnT797qr2cLbZ3q38ykwmWU6cNrLsf+O91yT
wnsCG6g1MdQb9mwVp0spPU/X/IuKbRg449XOzY9Ko4HmuSn1Inf6gUIBMigecjQ=
=wmRq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 09 May 2014 19:57:53 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
glib: fix g_poll early timeout on windows
block: qemu-iotests - test for live migration
block: qemu-iotests - update 085 to use common.qemu
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests
block/raw-posix: Try both FIEMAP and SEEK_HOLE
gluster: Correctly propagate errors when volume isn't accessible
vl.c: remove init_clocks call from main
block: Fix open flags with BDRV_O_SNAPSHOT
qemu-iotests: Test converting to streamOptimized from small cluster size
vmdk: Implement .bdrv_get_info()
vmdk: Implement .bdrv_write_compressed
qemu-img: Convert by cluster size if target is compressed
block/iscsi: bump year in copyright notice
block/nfs: Check for NULL server part
qemu-img: sort block formats in help message
iotests: Use configured python
qcow2: Fix alloc_clusters_noref() overflow detection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_poll has a problem on Windows when using
timeouts < 10ms, in glib/gpoll.c:
/* If not, and we have a significant timeout, poll again with
* timeout then. Note that this will return indication for only
* one event, or only for messages. We ignore timeouts less than
* ten milliseconds as they are mostly pointless on Windows, the
* MsgWaitForMultipleObjectsEx() call will timeout right away
* anyway.
*/
if (retval == 0 && (timeout == INFINITE || timeout >= 10))
retval = poll_rest (poll_msgs, handles, nhandles, fds, nfds, timeout);
so whenever g_poll is called with timeout < 10ms it does
a quick poll instead of wait, this causes significant performance
degradation of QEMU, thus we should use WaitForMultipleObjectsEx
directly
Signed-off-by: Stanislav Vorobiov <s.vorobiov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using error_is_set(ERRP) to find out whether to bail out due to
previous error is either wrong, fragile, or unnecessarily opaque.
It's wrong when ERRP may be null, because errors go undetected when it
is. It's fragile when proving ERRP non-null involves a non-local
argument. Else, it's unnecessarily opaque (see commit 84d18f0).
The error_is_set(state->errp) in qemu_opts_from_qdict_1() is merely
fragile, because the callers never pass state argument with null
state->errp.
Make the code more robust and more obviously correct: test
*state->errp directly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qemu_parse_fd() used to handle at least the following strings incorrectly:
o "-2": simply let through
o "2147483648": returned as LONG_MAX==INT_MAX on ILP32 (with ERANGE
ignored); implementation-defined behavior on LP64
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
glib >= 2.31 always enables thread support and g_thread_supported()
is #defined to 1, there's no need to call g_thread_init() anymore,
and it definitely does not need to report error which never happens.
Keep code for old < 2.31 glibc anyway for now, just #ifdef it
differently.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-trivial@nongnu.org
Fields "name" (created with strdup in new_entry) and "pathname"
(created with g_strdup_printf in new_entry) of pathelem struct should
be freed before the whole struct is.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Makes it a bit clear how the interdependencies work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
monitor_printf will drop the requested output if cur_mon is qmp (for
good reason). However these messages are often helpful for debugging
issues with via libvirt.
If we know the message won't hit the monitor, send it to stderr.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTNWRMAAoJECgfDbjSjVRp6CoH/A3iLi+jkV4EhQQzU8U6vOmi
PIV71600rZd29u4hk6w5pyev6yyXSBwatmWk+vzHvINUIcc22KUue+773nXPW/fH
3oIgTwjKndE98V5vTSeOgOdD7iFuWlcgHQHLXXMsgpY1hVMS/1kidZdb+36o8euI
kdE+AxYGXS8Z3oBRFfROpT4v0UZ17qIaL4tqA4JJWMh/A3Qp3HY+ffU3ODAvKSQw
KWVWmKvbh82I25HOvALoMwtu26x48jhzu586pHBuEsHgTJKKBrAUdWph+2f1eSC+
xTgduKWEgK6Z9dCYDQwDaM8CqNzjqVzfgRu0RCSHtgTxCWaIN3dQbxEFi7WQ2Yo=
=dfqJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iJwEAAECAAYFAlM0QokACgkQUlPFrXTwyDg0MAP/aV+I1bH7nAIXEPxfFNUd4bBQ
PsgaDTOd44G8SGjBqpO7EvgElBPfKnRfQjDmNV2LqYK6p+NMtlUh+ULDjxEBMBRU
hDXOWMlhHUU1to3vdN6qsRhCHNMEQUFeJWpv5EVIaD/VZkcgpz90F4WF6ZE0Xs9R
ZuUVbV/bapaow7bKoIk=
=3iLr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-03-27' into staging
trivial patches for 2014-03-27
# gpg: Signature made Thu 27 Mar 2014 15:23:53 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-27: (23 commits)
linux-user: remove duplicate statement
hw/timer/grlib_gptimer: remove unnecessary assignment
hw/pci-host/apb.c: Avoid shifting left into sign bit
hw/intc/xilinx_intc: Avoid shifting left into sign bit
hw/intc/slavio_intctl: Avoid shifting left into sign bit
tests/libqos/pci-pc: Avoid shifting left into sign bit
hw/ppc: Avoid shifting left into sign bit
hw/intc/openpic: Avoid shifting left into sign bit
hw/usb/hcd-ohci.c: Avoid shifting left into sign bit
target-mips: Avoid shifting left into sign bit
hw/i386/acpi_build.c: Avoid shifting left into sign bit
hw/pci/pci_host.c: Avoid shifting left into sign bit
hw/intc/apic.c: Use uint32_t for mask word in foreach_apic
target-i386: Avoid shifting left into sign bit
CODING_STYLE: Section about mixed declarations
doc: update default PowerPC framebuffer settings
doc: update sun4m documentation
fix return check for KVM_GET_DIRTY_LOG ioctl
target-i386: Add missing 'static' and 'const' attributes
util: Add 'static' attribute to function implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The static code analyzer smatch complains because of a missing 'static'
attribute:
util/module.c:166:6: warning:
symbol 'module_load' was not declared. Should it be static?
'static' is used in the forward declaration, but not in the implementation.
Add it there, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds a helper to format ethernet MAC address.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
glib versions prior to 2.31.0 require an explicit g_thread_init() call
to enable multi-threading.
Failure to initialize threading causes glib to take single-threaded code
paths without synchronization. For example, the g_slice allocator will
crash due to race conditions.
Fix this for all QEMU tool programs (qemu-nbd, qemu-io, qemu-img) by
moving the g_thread_init() call from vl.c:main() into a new
osdep.c:thread_init() constructor function.
thread_init() has __attribute__((constructor)) and is automatically
invoked by the runtime during startup.
We can now drop the "simple" trace backend's g_thread_init() call since
thread_init() already called it.
Note that we must keep coroutine-gthread.c's g_thread_init() call which
is located in a constructor function. There is no guarantee for
constructor function ordering so thread_init() may only be called later.
Reported-by: Mario de Chenno <mario.dechenno@unina2.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 10f5bff622 (util: Split out
exec_dir from os_find_datadir) moved code from os-posix.c to
util/oslib-posix.c but forgot to move a FreeBSD #include alongside,
needed for CTL_KERN among others.
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1394717279-23406-1-git-send-email-andreas.faerber@web.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QemuMutex does not guarantee fairness and cannot be acquired
recursively:
Fairness means each locker gets a turn and the scheduler cannot cause
starvation.
Recursive locking is useful for composition, it allows a sequence of
locking operations to be invoked atomically by acquiring the lock around
them.
This patch adds RFifoLock, a recursive lock that guarantees FIFO order.
Its first user is added in the next patch.
RFifoLock has one additional feature: it can be initialized with an
optional contention callback. The callback is invoked whenever a thread
must wait for the lock. For example, it can be used to poke the current
owner so that they release the lock soon.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pthread_setname_np was introduced with 2.12.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch adds the Divide Doubleword Extended instructions.
The implementation builds on the unsigned helper provided in
the previous patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended Unsigned
instructions. This instruction requires dividing a 128-bit
value by a 64 bit value. Since 128 bit integer division is
not supported in TCG, a helper is used. An architecture
independent 128-bit division routine is added to host-utils.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[agraf: use ||]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Compiling util/modules.c with modules enabled fails now.
Fix it by including qemu-common.h before #ifdef testing in module.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1393453893-12125-1-git-send-email-famz@redhat.com
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In config_parse_qdict_section(), the QList returned by
qdict_array_split() is assumed to only contain QDicts. Currently, this
is true but it may (and will) change in the future. Therefore, check
whether the assumption actually holds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
has_help_option() checks if any help option ('help' or '?') occurs
anywhere in an option string, so that things like 'cluster_size=4k,help'
are recognised.
is_valid_option_list() ensures that the option list doesn't have options
with leading commas or trailing unescaped commas.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To improve the predictability of fifo8_pop_buf(), the fifo head is set
to the start of data buffer upon a reset so that the first call to the
function will be able to retrieve all data in the fifo.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch adds functions fifo8_push_all() and fifo8_pop_buf() which
can be used respectively to push the content of a memory buffer to the
fifo and to pop multiple bytes obtaining a pointer to the fifo backing
buffer.
In addition, it implements fifo8_num_free() and fifo8_num_used() which
allow to check if a multi-byte operation can be performed.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
osdep.c does not use trace_*() so we can just drop the include.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions used by qemu_memalign() require an alignment that is at
least sizeof(void*). Adjust it if it is too small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
Since commit a7aae221 ('Switch SIG_IPI to SIGUSR1'), SIGUSR1 is blocked
during startup, breaking the progress report in tools.
This patch reenables the signal when initialising a progress report.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This function basically parses command-line options given as a QDict
replacing a config file.
For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:
[section]
opt1 = 42
opt2 = 23
It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:
inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update
This would correspond to the following config file:
[inject-error "inject-error.0"]
event = reftable_load
[inject-error "inject-error.1"]
event = l2_load
[set-state]
event = l1_update
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using stdin with readline.c requires disabling echo and line buffering.
Add a portable wrapper to set the terminal attributes under Linux and
Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/. Put the header into include/qemu/.
Move the source file into util/ so it can be linked as part of
libqemuutil.a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit d32934c84c.
The original implementation before this patch makes abortive error
messages much more friendly. The underlying bug that required this
change is now fixed. Revert.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special Error * that can be passed to error handling APIs to
signal that any errors are fatal and should abort QEMU. There are two
advantages to this:
- allows for brevity when wishing to assert success of Error **
accepting APIs. No need for this pattern:
Error * local_err = NULL;
api_call(foo, bar, &local_err);
assert_no_error(local_err);
This also removes the need for _nofail variants of APIs with
asserting call sites now reduced to 1LOC.
- SIGABRT happens from within the offending API. When a fatal error
occurs in an API call (when the caller is asserting sucess) failure
often means the API itself is broken. With the abort happening in the
API call now, the stack frames into the call are available at debug
time. In the assert_no_error scheme the abort happens after the fact.
The exact semantic is that when an error is raised, if the argument
Error ** matches &error_abort, then the abort occurs immediately. The
error messaged is reported.
For error_propagate, if the destination error is &error_abort, then
the abort happens at propagation time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=uEdP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches for 2.0 (flushing block-next)
# gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (17) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony: (41 commits)
qemu-iotests: Add sample image and test for VMDK version 3
vmdk: Allow read only open of VMDK version 3
qemu-iotests: Filter out 'qemu-io> ' prompt
qemu-iotests: Filter qemu-io output in 025
block: Use BDRV_O_NO_BACKING where appropriate
qemu-iotests: Test snapshot mode
block: Enable BDRV_O_SNAPSHOT with driver-specific options
qemu-iotests: Make test case 030, 040 and 055 deterministic
qemu-iotest: Add pause_drive and resume_drive methods
blkdebug: add "remove_break" command
qemu-iotests: Drop local version of cancel_and_wait from 040
sheepdog: support user-defined redundancy option
sheepdog: refactor do_sd_create()
qdict: Optimise qdict_do_flatten()
qdict: Fix memory leak in qdict_do_flatten()
MAINTAINERS: add sheepdog development mailing list
COW: Extend checking allocated bits to beyond one sector
COW: Speed up writes
qapi: Change BlockDirtyInfo to list
block: per caller dirty bitmap
...
Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There may be calls to error_setg() and especially error_setg_errno()
which blindly (and until now wrongly) assume these functions not to
clobber errno (e.g., they pass errno to error_setg_errno() and return
-errno afterwards). Instead of trying to find and fix all of these
constructs, just make sure error_setg() and error_setg_errno() indeed do
not clobber errno.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This emulates Win32 manual-reset events using futexes or conditional
variables. Typical ways to use them are with multi-producer,
single-consumer data structures, to test for a complex condition whose
elements come from different threads:
for (;;) {
qemu_event_reset(ev);
... test complex condition ...
if (condition is true) {
break;
}
qemu_event_wait(ev);
}
Or more efficiently (but with some duplication):
... evaluate condition ...
while (!condition) {
qemu_event_reset(ev);
... evaluate condition ...
if (!condition) {
qemu_event_wait(ev);
... evaluate condition ...
}
}
QemuEvent provides a very fast userspace path in the common case when
no other thread is waiting, or the event is not changing state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_thread_create already does signal blocking and detaching for us.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
migration: Fix compiler warning ('caps' may be used uninitialized)
util/path: Fix type which is longer than 8 bit for MinGW
hw/9pfs: Fix errno value for xattr functions
vl: Clean up unnecessary boot_order complications
qemu-char: Fix potential out of bounds access to local arrays
pci-ohci: Add missing 'break' in ohci_service_td
sh4: Fix serial line access for Linux kernels later than 3.2
hw/alpha: Fix compiler warning (integer constant is too large)
target-i386: Fix compiler warning (integer constant is too large)
block: Remove unused assignment (fixes warning from clang)
exec: cleanup DEBUG_SUBPAGE
tests: Fix schema parser test for in-tree build
tests: Update .gitignore for test-int128 and test-bitops
.gitignore: ignore tests/qemu-iotests/socket_scm_helper
Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
While dirent->d_type is 8 bit for most systems, it is 32 bit for MinGW.
Reducing it to 8 bit results in a compiler warning because the macro
is_dir_maybe compares that 8 bit value with 32 bit constants.
Using 'unsigned' instead of 'unsigned char' matches the declaration for
MinGW and does not harm the other systems.
MinGW-w64 is not affected: it does not declare d_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If a socket is closed it remains in TIME_WAIT state for some time. On operating
systems using BSD sockets the endpoint of the socket may not be reused while in
this state unless SO_REUSEADDR was set on the socket. On windows on the other
hand the default behaviour is to allow reuse (i.e. identical to SO_REUSEADDR on
other operating systems) and setting SO_REUSEADDR on a socket allows it to be
bound to a endpoint even if the endpoint is already used by another socket
independently of the other sockets state. This can even result in undefined
behaviour.
Many sockets used by QEMU should not block the use of their endpoint after being
closed while they are still in TIME_WAIT state. Currently QEMU sets SO_REUSEADDR
for such sockets, which can lead to problems on Windows. This patch introduces
the function socket_set_fast_reuse that should be used instead of setting
SO_REUSEADDR when fast socket reuse is desired and behaves correctly on all
operating systems.
As a failure of this function can only be caused by bad QEMU internal errors, an
assertion handles these situations. The return value is still passed on, to
minimize changes in client code and prevent unused variable warnings if NDEBUG
is defined.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
Print a warning when opening a file O_DIRECT fails with EINVAL. This
saves users a lot of time trying to figure out the EINVAL error, which
is typical when attempting to open a file O_DIRECT on Linux tmpfs.
Reported-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We abort() on memory allocation failure. abort() is appropriate for
programming errors. Maybe most memory allocation failures are
programming errors, maybe not. But guest memory allocation failure
isn't, and aborting when the user asks for more memory than we can
provide is not nice. exit(1) instead, and do it in just one place, so
the error message is consistent.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
qemu-ga: Call Windows VSS requester in fsfreeze command handler
qemu-ga: Add Windows VSS provider and requester as DLL
error: Add error_set_win32 and error_setg_win32
qemu-ga: Add configure options to specify path to Windows/VSS SDK
Add a script to extract VSS SDK headers on POSIX system
checkpatch.pl: Check .cpp files
Add c++ keywords to QAPI helper script
configure: Support configuring C++ compiler
mips_malta: support up to 2GiB RAM
Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 6d4cd40 fixed qemu_opts_set_defaults() for an existing corner
case, but broke it for another one that can't be reached in current
code.
Quote from its commit message:
I believe [opts_parse()] attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
The only caller that passes true for defaults is
qemu_opts_set_defaults().
The commit message then claims:
A straightforward call of qemu_opts_create() does exactly that.
Wrong. When !list->merge_lists, and the option string doesn't contain
id=, and options without ID exist, then we don't actually modify the
existing options, we create new ones.
Not reachable, because we never pass lists with !list->merge_lists to
qemu_opts_set_defaults().
Guard against possible (if unlikely) future misuse with assert().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1375428840-5275-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this patch, iov_send_recv() never returns when do_send_recv()
returns zero.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current code includes assert.h very early (from qemu-common.h),
so the definition of NDEBUG was without any effect.
In the initial version from 2004, NDEBUG was used to disable the assertions.
Those assertions are not in time critical code, so it is no longer
reasonable to disable them and the definition of NDEBUG can be removed.
Type u16 is also unused and therefore does not need a type definition.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 4f6dd9a changed the initialization of opts in opts_parse() to
this:
if (defaults) {
if (!id && !QTAILQ_EMPTY(&list->head)) {
opts = qemu_opts_find(list, NULL);
} else {
opts = qemu_opts_create(list, id, 0);
}
} else {
opts = qemu_opts_create(list, id, 1);
}
Same as before for !defaults.
If defaults is true, and params has no ID, and options exist, we use
the first assignment. It sets opts to null if all options have an ID.
opts_parse() then returns null. qemu_opts_set_defaults() asserts the
value is non-null. It's the only caller that passes true for
defaults.
To reproduce, try "-M xenpv -machine id=foo" (yes, "id=foo" is silly,
but it shouldn't crash).
I believe the function attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
A straightforward call of qemu_opts_create() does exactly that.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Crashes when the first list member has an ID. Admittedly nonsensical
reproducer:
$ qemu-system-x86_64 -nodefaults -machine id=foo -machine ""
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372943363-24081-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
notifier_list_notify() has no return value. This is fine when we just
want to invoke side-effects.
Sometimes it's useful for notifiers to produce a return value. This
allows notifiers to "veto" an operation and will be used by the block
layer before-write notifier.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Watch this:
$ upstream-qemu -nodefaults -S -vnc :0,acl,sasl -monitor stdio
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username drei allow
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow drei
(qemu) acl_add vnc.username zwei allow 1
acl: added rule at position 2
(qemu) acl_show vnc.username
policy: deny
1: allow drei
2: allow zwei
(qemu) acl_add vnc.username eins allow 1
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow eins
2: allow drei
3: allow zwei
The second acl_add inserts at position 2 instead of 1.
Root cause is an off-by-one in qemu_acl_insert(): when index ==
acl->nentries, it appends instead of inserting before the last list
element.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to RFC 1123 [1], hostnames can start with a digit too.
[1] http://tools.ietf.org/html/rfc1123#page-13
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
[Use strspn, not strcspn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
This function returns ${prefix}/var/RELATIVE_PATHNAME on POSIX-y systems,
and <CSIDL_COMMON_APPDATA>/RELATIVE_PATHNAME on Win32.
http://msdn.microsoft.com/en-us/library/bb762494.aspx
[...] This folder is used for application data that is not user
specific. For example, an application can store a spell-check
dictionary, a database of clip art, or a log file in the
CSIDL_COMMON_APPDATA folder. [...]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the Castagnoli CRC32C algorithm, using the 0x11EDC6F41
polynomial.
This is extracted from the linux kernel cryptographic crc32.c module.
The algorithm is based on:
Castagnoli93: Guy Castagnoli and Stefan Braeuer and Martin Herrman
"Optimization of Cyclic Redundancy-Check Codes with 24
and 32 Parity Bits", IEEE Transactions on Communication,
Volume 41, Number 6, June 1993
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit e9d8fbf (qemu-file: do not use stdio for qemu_fdopen, 2013-03-27)
introduced a usage of writev, which mingw32 does not have. Even though
qemu_fdopen itself is not used on mingw32, the future-proof solution is
to add an implementation of it. This is simple and similar to how we
emulate sendmsg/recvmsg in util/iov.c.
Some files include osdep.h without qemu-common.h, so move the definition
of iovec to osdep.h too, and include osdep.h from qemu-common.h
unconditionally (protection against including files when NEED_CPU_H is
defined is not needed since the removal of AREG0).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduces a new utility function: parse_debug_env to avoid code
duplication.
This overrides whatever debug value is set on the corresponding devices
from the command line, and is meant to ease the usage with any
management stack. For libvirt you can set environment variables by
extending the dom namespace, i.e:
<domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<qemu:commandline>
<qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/>
<qemu:env name='QEMU_CCID_DEBUG' value='4'/>
</qemu:commandline>
</domain>
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
vscclient needs to call socket_init() for portability.
Moving to osdep.c since it has no internal dependency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Partial writes can still happen in sendmsg and recvmsg, if a
signal is received in the middle of a write. To handle this,
retry the operation with a new offset/bytes pair.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"si" and "ei" are merged in a single variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not touch the "bytes" argument anymore. Instead, remember the
original length of the last iovec if we touch it, and restore it
afterwards.
This requires undoing the changes in opposite order. The previous
algorithm didn't care.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once the initial part of the iov is dropped, it is not used anymore.
Modify iov/iovcnt directly instead of adjusting them with the "si"
variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using qemu_memalign only leaves the RAM zero by chance, because libc
will usually use mmap to satisfy our huge requests. But memory will
not be zero when using MALLOC_PERTURB_ with a nonzero value. In the
case of incoming migration, this breaks a recently-introduced
invariant (commit f1c7279, migration: do not sent zero pages in
bulk stage, 2013-03-26).
To fix this, use mmap ourselves to get a well-aligned, always zero
block for the RAM. Mmap-ed memory is easy to "trim" at the sides.
This also removes the need to do something special on valgrind
(see commit c2a8238a, Support running QEMU on Valgrind, 2011-10-31),
thus effectively reverts that patch.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365522223-20153-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove static attribute to Td[0-5] and Te[0-5] tables so that they
can be used outside of aes.c. Change their type from u32 to uint32_t,
to keep the u32 udef local to aes.c. Prefix them with AES_ so that they
do not conflict with other symbols.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a fix for OpenBSD which was
listed in one function as part of the previous hard coded list of OS's
for the functions to support but not in the other.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20130405003748.GH884@rox.home.comstyle.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for file descriptor passing,
otherwise we could unexpectedly be using a blocking file descriptor.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
this patch adopts the loop unrolling idea of bitmap_is_zero() to
speed up the skipping of large areas with zeros in find_next_bit().
this routine is extensively used to find dirty pages in
live migration.
testing only the find_next_bit performance on a zeroed bitfield
the loop onrolling decreased executing time by approx. 50% on x86_64.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
performance gain on SSE2 is approx. 20-25%. altivec
is not tested. performance for unsigned long arithmetic
is unchanged.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
this adds buffer_find_nonzero_offset() which is a SSE2/Altivec
optimized function that searches for non-zero content in a
buffer.
the function starts full unrolling only after the first few chunks have
been checked one by one. analyzing real memory page data has revealed
that non-zero pages are non-zero within the first 256-512 bits in
most cases. as this function is also heavily used to check for zero memory
pages this tweak has been made to avoid the high setup costs of the fully
unrolled check for non-zero pages.
due to the optimizations used in the function there are restrictions
on buffer address and search length. the function
can_use_buffer_find_nonzero_content() can be used to check if
the function can be used safely.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
# By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
nbd: Check against invalid option combinations
nbd: Use default port if only host is specified
block: Allow omitting the file name when using driver-specific options
block: Make find_image_format safe with NULL filename
block: Rename variable to avoid shadowing
block: Introduce .bdrv_parse_filename callback
nbd: Accept -drive options for the network connection
nbd: Remove unused functions
nbd: Keep hostname and port separate
qemu-socket: Make socket_optslist public
block: Pass bdrv_file_open() options to block drivers
block: Add options QDict to bdrv_file_open() prototypes
block: complete all IOs before resizing a device
Revert "block: complete all IOs before .bdrv_truncate"
The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.
Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
