18bb73b327
186 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gerd Hoffmann
|
18bb73b327 |
tests/acpi: add microvm pcie test
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-11-kraxel@redhat.com |
||
|
Gerd Hoffmann
|
62b61b8552 |
tests/acpi: factor out common microvm test setup
... into new test_acpi_microvm_prepare helper Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-10-kraxel@redhat.com |
||
|
Gerd Hoffmann
|
928dda4301 |
tests/acpi: allow updates for expected data files
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-8-kraxel@redhat.com |
||
|
Michael S. Tsirkin
|
f142e4ede7 |
tests/acpi: drop unnecessary files
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes:
|
||
|
Ani Sinha
|
0ed93f4c05 |
tests/acpi: update golden master DSDT binary table blobs for q35
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
c4bb646ffb |
Add ACPI DSDT tables for q35 that are being updated by the next patch
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
8b434b031f |
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
This patch adds a binary blob corresponding to the DSDT acpi table. It is used
to unit test the flag 'acpi-pci-hotplug-with-bridge-support' used with pci
bridges.
This change also clears the file tests/qtest/bios-tables-test-allowed-diff.h
so that future changes which affect the table can be caught.
The following is the diff between files tests/data/acpi/pc/DSDT.bridge and
tests/data/acpi/pc/DSDT.hpbridge after disassembly :
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 23:21:34 2020
+ * Disassembly of /tmp/aml-7UURQ0, Fri Sep 11 23:21:34 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001A89 (6793)
+ * Length 0x0000131F (4895)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x09
+ * Checksum 0xF9
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -859,522 +859,32 @@
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
- Name (BSEL, One)
- Device (S00)
- {
- Name (_SUN, Zero) // _SUN: Slot User Number
- Name (_ADR, Zero) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S08)
- {
- Name (_SUN, One) // _SUN: Slot User Number
- Name (_ADR, 0x00010000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S10)
- {
- Name (_SUN, 0x02) // _SUN: Slot User Number
- Name (_ADR, 0x00020000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S18)
- {
- Name (_SUN, 0x03) // _SUN: Slot User Number
- Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S20)
- {
- Name (_SUN, 0x04) // _SUN: Slot User Number
- Name (_ADR, 0x00040000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S28)
- {
- Name (_SUN, 0x05) // _SUN: Slot User Number
- Name (_ADR, 0x00050000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S30)
- {
- Name (_SUN, 0x06) // _SUN: Slot User Number
- Name (_ADR, 0x00060000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S38)
- {
- Name (_SUN, 0x07) // _SUN: Slot User Number
- Name (_ADR, 0x00070000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S40)
- {
- Name (_SUN, 0x08) // _SUN: Slot User Number
- Name (_ADR, 0x00080000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S48)
- {
- Name (_SUN, 0x09) // _SUN: Slot User Number
- Name (_ADR, 0x00090000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S50)
- {
- Name (_SUN, 0x0A) // _SUN: Slot User Number
- Name (_ADR, 0x000A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S58)
- {
- Name (_SUN, 0x0B) // _SUN: Slot User Number
- Name (_ADR, 0x000B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S60)
- {
- Name (_SUN, 0x0C) // _SUN: Slot User Number
- Name (_ADR, 0x000C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S68)
- {
- Name (_SUN, 0x0D) // _SUN: Slot User Number
- Name (_ADR, 0x000D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S70)
- {
- Name (_SUN, 0x0E) // _SUN: Slot User Number
- Name (_ADR, 0x000E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S78)
- {
- Name (_SUN, 0x0F) // _SUN: Slot User Number
- Name (_ADR, 0x000F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S80)
- {
- Name (_SUN, 0x10) // _SUN: Slot User Number
- Name (_ADR, 0x00100000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S88)
- {
- Name (_SUN, 0x11) // _SUN: Slot User Number
- Name (_ADR, 0x00110000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S90)
- {
- Name (_SUN, 0x12) // _SUN: Slot User Number
- Name (_ADR, 0x00120000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S98)
- {
- Name (_SUN, 0x13) // _SUN: Slot User Number
- Name (_ADR, 0x00130000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA0)
- {
- Name (_SUN, 0x14) // _SUN: Slot User Number
- Name (_ADR, 0x00140000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA8)
- {
- Name (_SUN, 0x15) // _SUN: Slot User Number
- Name (_ADR, 0x00150000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB0)
- {
- Name (_SUN, 0x16) // _SUN: Slot User Number
- Name (_ADR, 0x00160000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB8)
- {
- Name (_SUN, 0x17) // _SUN: Slot User Number
- Name (_ADR, 0x00170000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC0)
- {
- Name (_SUN, 0x18) // _SUN: Slot User Number
- Name (_ADR, 0x00180000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC8)
- {
- Name (_SUN, 0x19) // _SUN: Slot User Number
- Name (_ADR, 0x00190000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD0)
- {
- Name (_SUN, 0x1A) // _SUN: Slot User Number
- Name (_ADR, 0x001A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD8)
- {
- Name (_SUN, 0x1B) // _SUN: Slot User Number
- Name (_ADR, 0x001B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE0)
- {
- Name (_SUN, 0x1C) // _SUN: Slot User Number
- Name (_ADR, 0x001C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE8)
- {
- Name (_SUN, 0x1D) // _SUN: Slot User Number
- Name (_ADR, 0x001D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF0)
- {
- Name (_SUN, 0x1E) // _SUN: Slot User Number
- Name (_ADR, 0x001E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF8)
- {
- Name (_SUN, 0x1F) // _SUN: Slot User Number
- Name (_ADR, 0x001F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Method (DVNT, 2, NotSerialized)
- {
- If ((Arg0 & One))
- {
- Notify (S00, Arg1)
- }
-
- If ((Arg0 & 0x02))
- {
- Notify (S08, Arg1)
- }
-
- If ((Arg0 & 0x04))
- {
- Notify (S10, Arg1)
- }
-
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
- If ((Arg0 & 0x10))
- {
- Notify (S20, Arg1)
- }
-
- If ((Arg0 & 0x20))
- {
- Notify (S28, Arg1)
- }
-
- If ((Arg0 & 0x40))
- {
- Notify (S30, Arg1)
- }
-
- If ((Arg0 & 0x80))
- {
- Notify (S38, Arg1)
- }
-
- If ((Arg0 & 0x0100))
- {
- Notify (S40, Arg1)
- }
-
- If ((Arg0 & 0x0200))
- {
- Notify (S48, Arg1)
- }
-
- If ((Arg0 & 0x0400))
- {
- Notify (S50, Arg1)
- }
-
- If ((Arg0 & 0x0800))
- {
- Notify (S58, Arg1)
- }
-
- If ((Arg0 & 0x1000))
- {
- Notify (S60, Arg1)
- }
-
- If ((Arg0 & 0x2000))
- {
- Notify (S68, Arg1)
- }
-
- If ((Arg0 & 0x4000))
- {
- Notify (S70, Arg1)
- }
-
- If ((Arg0 & 0x8000))
- {
- Notify (S78, Arg1)
- }
-
- If ((Arg0 & 0x00010000))
- {
- Notify (S80, Arg1)
- }
-
- If ((Arg0 & 0x00020000))
- {
- Notify (S88, Arg1)
- }
-
- If ((Arg0 & 0x00040000))
- {
- Notify (S90, Arg1)
- }
-
- If ((Arg0 & 0x00080000))
- {
- Notify (S98, Arg1)
- }
-
- If ((Arg0 & 0x00100000))
- {
- Notify (SA0, Arg1)
- }
-
- If ((Arg0 & 0x00200000))
- {
- Notify (SA8, Arg1)
- }
-
- If ((Arg0 & 0x00400000))
- {
- Notify (SB0, Arg1)
- }
-
- If ((Arg0 & 0x00800000))
- {
- Notify (SB8, Arg1)
- }
-
- If ((Arg0 & 0x01000000))
- {
- Notify (SC0, Arg1)
- }
-
- If ((Arg0 & 0x02000000))
- {
- Notify (SC8, Arg1)
- }
-
- If ((Arg0 & 0x04000000))
- {
- Notify (SD0, Arg1)
- }
-
- If ((Arg0 & 0x08000000))
- {
- Notify (SD8, Arg1)
- }
-
- If ((Arg0 & 0x10000000))
- {
- Notify (SE0, Arg1)
- }
-
- If ((Arg0 & 0x20000000))
- {
- Notify (SE8, Arg1)
- }
-
- If ((Arg0 & 0x40000000))
- {
- Notify (SF0, Arg1)
- }
-
- If ((Arg0 & 0x80000000))
- {
- Notify (SF8, Arg1)
- }
- }
-
- Method (PCNT, 0, NotSerialized)
- {
- BNUM = One
- DVNT (PCIU, One)
- DVNT (PCID, 0x03)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1779,22 +1289,21 @@
If ((Arg0 & 0x40000000))
{
Notify (SF0, Arg1)
}
If ((Arg0 & 0x80000000))
{
Notify (SF8, Arg1)
}
}
Method (PCNT, 0, NotSerialized)
{
BNUM = Zero
DVNT (PCIU, One)
DVNT (PCID, 0x03)
- ^S18.PCNT ()
}
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-9-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
5e3a486211 |
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
This change adds a new unit test for the global flag 'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci bridges in i440fx. The flag can be used to turn off ACPI based hotplug support on all pci bridges. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-8-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Ani Sinha
|
0fb41e8987 |
tests/acpi: list added acpi table binary file for pci bridge hotplug test
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under i440fx. This change documents this fact. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-7-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Ani Sinha
|
df00a52972 |
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
to unit test hotplug on/off capability on the root pci bus for i440fx.
The diff between the table DSDT.bridge and DSDT.roothp is listed below:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 22:51:04 2020
+ * Disassembly of /tmp/aml-UGIHQ0, Fri Sep 11 22:51:04 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001A89 (6793)
+ * Length 0x0000140A (5130)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x09
+ * Checksum 0xE6
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -831,61 +831,60 @@
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0510, // Range Minimum
0x0510, // Range Maximum
0x01, // Alignment
0x0C, // Length
)
})
}
}
Scope (\_SB)
{
Scope (PCI0)
{
- Name (BSEL, Zero)
Device (S00)
{
Name (_ADR, Zero) // _ADR: Address
}
Device (S10)
{
Name (_ADR, 0x00020000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
- Name (BSEL, One)
+ Name (BSEL, Zero)
Device (S00)
{
Name (_SUN, Zero) // _SUN: Slot User Number
Name (_ADR, Zero) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S08)
{
Name (_SUN, One) // _SUN: Slot User Number
Name (_ADR, 0x00010000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
@@ -1345,456 +1344,30 @@
Notify (SE8, Arg1)
}
If ((Arg0 & 0x40000000))
{
Notify (SF0, Arg1)
}
If ((Arg0 & 0x80000000))
{
Notify (SF8, Arg1)
}
}
Method (PCNT, 0, NotSerialized)
{
- BNUM = One
+ BNUM = Zero
DVNT (PCIU, One)
DVNT (PCID, 0x03)
}
}
- Device (S20)
- {
- Name (_SUN, 0x04) // _SUN: Slot User Number
- Name (_ADR, 0x00040000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S28)
- {
- Name (_SUN, 0x05) // _SUN: Slot User Number
- Name (_ADR, 0x00050000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S30)
- {
- Name (_SUN, 0x06) // _SUN: Slot User Number
- Name (_ADR, 0x00060000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S38)
- {
- Name (_SUN, 0x07) // _SUN: Slot User Number
- Name (_ADR, 0x00070000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S40)
- {
- Name (_SUN, 0x08) // _SUN: Slot User Number
- Name (_ADR, 0x00080000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S48)
- {
- Name (_SUN, 0x09) // _SUN: Slot User Number
- Name (_ADR, 0x00090000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S50)
- {
- Name (_SUN, 0x0A) // _SUN: Slot User Number
- Name (_ADR, 0x000A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S58)
- {
- Name (_SUN, 0x0B) // _SUN: Slot User Number
- Name (_ADR, 0x000B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S60)
- {
- Name (_SUN, 0x0C) // _SUN: Slot User Number
- Name (_ADR, 0x000C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S68)
- {
- Name (_SUN, 0x0D) // _SUN: Slot User Number
- Name (_ADR, 0x000D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S70)
- {
- Name (_SUN, 0x0E) // _SUN: Slot User Number
- Name (_ADR, 0x000E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S78)
- {
- Name (_SUN, 0x0F) // _SUN: Slot User Number
- Name (_ADR, 0x000F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S80)
- {
- Name (_SUN, 0x10) // _SUN: Slot User Number
- Name (_ADR, 0x00100000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S88)
- {
- Name (_SUN, 0x11) // _SUN: Slot User Number
- Name (_ADR, 0x00110000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S90)
- {
- Name (_SUN, 0x12) // _SUN: Slot User Number
- Name (_ADR, 0x00120000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S98)
- {
- Name (_SUN, 0x13) // _SUN: Slot User Number
- Name (_ADR, 0x00130000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA0)
- {
- Name (_SUN, 0x14) // _SUN: Slot User Number
- Name (_ADR, 0x00140000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA8)
- {
- Name (_SUN, 0x15) // _SUN: Slot User Number
- Name (_ADR, 0x00150000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB0)
- {
- Name (_SUN, 0x16) // _SUN: Slot User Number
- Name (_ADR, 0x00160000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB8)
- {
- Name (_SUN, 0x17) // _SUN: Slot User Number
- Name (_ADR, 0x00170000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC0)
- {
- Name (_SUN, 0x18) // _SUN: Slot User Number
- Name (_ADR, 0x00180000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC8)
- {
- Name (_SUN, 0x19) // _SUN: Slot User Number
- Name (_ADR, 0x00190000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD0)
- {
- Name (_SUN, 0x1A) // _SUN: Slot User Number
- Name (_ADR, 0x001A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD8)
- {
- Name (_SUN, 0x1B) // _SUN: Slot User Number
- Name (_ADR, 0x001B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE0)
- {
- Name (_SUN, 0x1C) // _SUN: Slot User Number
- Name (_ADR, 0x001C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE8)
- {
- Name (_SUN, 0x1D) // _SUN: Slot User Number
- Name (_ADR, 0x001D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF0)
- {
- Name (_SUN, 0x1E) // _SUN: Slot User Number
- Name (_ADR, 0x001E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF8)
- {
- Name (_SUN, 0x1F) // _SUN: Slot User Number
- Name (_ADR, 0x001F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Method (DVNT, 2, NotSerialized)
- {
- If ((Arg0 & 0x10))
- {
- Notify (S20, Arg1)
- }
-
- If ((Arg0 & 0x20))
- {
- Notify (S28, Arg1)
- }
-
- If ((Arg0 & 0x40))
- {
- Notify (S30, Arg1)
- }
-
- If ((Arg0 & 0x80))
- {
- Notify (S38, Arg1)
- }
-
- If ((Arg0 & 0x0100))
- {
- Notify (S40, Arg1)
- }
-
- If ((Arg0 & 0x0200))
- {
- Notify (S48, Arg1)
- }
-
- If ((Arg0 & 0x0400))
- {
- Notify (S50, Arg1)
- }
-
- If ((Arg0 & 0x0800))
- {
- Notify (S58, Arg1)
- }
-
- If ((Arg0 & 0x1000))
- {
- Notify (S60, Arg1)
- }
-
- If ((Arg0 & 0x2000))
- {
- Notify (S68, Arg1)
- }
-
- If ((Arg0 & 0x4000))
- {
- Notify (S70, Arg1)
- }
-
- If ((Arg0 & 0x8000))
- {
- Notify (S78, Arg1)
- }
-
- If ((Arg0 & 0x00010000))
- {
- Notify (S80, Arg1)
- }
-
- If ((Arg0 & 0x00020000))
- {
- Notify (S88, Arg1)
- }
-
- If ((Arg0 & 0x00040000))
- {
- Notify (S90, Arg1)
- }
-
- If ((Arg0 & 0x00080000))
- {
- Notify (S98, Arg1)
- }
-
- If ((Arg0 & 0x00100000))
- {
- Notify (SA0, Arg1)
- }
-
- If ((Arg0 & 0x00200000))
- {
- Notify (SA8, Arg1)
- }
-
- If ((Arg0 & 0x00400000))
- {
- Notify (SB0, Arg1)
- }
-
- If ((Arg0 & 0x00800000))
- {
- Notify (SB8, Arg1)
- }
-
- If ((Arg0 & 0x01000000))
- {
- Notify (SC0, Arg1)
- }
-
- If ((Arg0 & 0x02000000))
- {
- Notify (SC8, Arg1)
- }
-
- If ((Arg0 & 0x04000000))
- {
- Notify (SD0, Arg1)
- }
-
- If ((Arg0 & 0x08000000))
- {
- Notify (SD8, Arg1)
- }
-
- If ((Arg0 & 0x10000000))
- {
- Notify (SE0, Arg1)
- }
-
- If ((Arg0 & 0x20000000))
- {
- Notify (SE8, Arg1)
- }
-
- If ((Arg0 & 0x40000000))
- {
- Notify (SF0, Arg1)
- }
-
- If ((Arg0 & 0x80000000))
- {
- Notify (SF8, Arg1)
- }
- }
-
Method (PCNT, 0, NotSerialized)
{
- BNUM = Zero
- DVNT (PCIU, One)
- DVNT (PCID, 0x03)
^S18.PCNT ()
}
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
274763957b |
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
|
||
|
Ani Sinha
|
eb9609a17d |
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
|
||
|
Igor Mammedov
|
6e2e2e8a42 |
tests: acpi: update acpi blobs with new AML
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
2f509200bb |
tests: acpi: mark to be changed tables in bios-tables-test-allowed-diff
... to let tests pass until binary blobs are updated with new AML Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200923094650.1301166-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
63e79833c4 |
cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants. Users should use device_add command instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200915120403.1074579-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Dima Stepanov
|
892040dc8b |
tests/qtest/vhost-user-test: prepare the tests for adding new dev class
For now only vhost-user-net device is supported by the test. Other vhost-user devices are not tested. As a first step make source code refactoring so new devices can reuse the same test routines. To make this provide a new vhost_user_ops structure with the methods to initialize device, its command line or make a proper vhost-user responses. Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Peter Maydell
|
a6a0c8394c |
microvm: add acpi support
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCgAGBQJfY2pCAAoJEEy22O7T6HE4LegQANGeb7oAWgdD6rI9aFQTD6zK tU3jjfIbt/xsxnbnWVlNeouoxwKTJUiBxmVNgPPZdgXYd7GgKn8qZe5ccnnF6TX2 n9+GCV1Jvc7clBMVvj3EceSaKQrd859i2mXc85YEeC6T/Hcq9zSwDN9UTCeQYOCZ 27r6wzWpL2sU6/vHXzb24VSZzKl91uQAekFI7WM7z+/fv3kz5KGff2zzq2Rp+77s do5MU++fcnAmz31c9vBoT9v5tvNWe6xXu79Fn2ay9orDj/uThkF+PqGGVQiyxeOi 6E2X321AhMxSUqVgev1j0O+ZcxECxXoK8/7RQu72JLbTUPBAyC8jyuFATuMbQd7Z xS5WNBEe0Qo7zA1ZBvpnQyPrW21Wi95mON9GPrk0ixH0ECl6Bb+vMRunBK6tiUtw 635qi73VfpNbu4fi7CBQwd/9+LDfgVb3+uEoO0EEL5WWbK9XjoklK+7chGbu4RFg H0or5yvX2CbR7z52W+HXNMuseUFvIQrJ8taOla8AoS/I9cKxj+j99AEYv8MNMVwe rRvJF0iL/hl1pdgeOm+noRDG9ledefYxscvUdVAs+5rdiOEMKDbNbm+Ff6BKfM5N 8rTS7d6s8PXFql/YTc1CLTQmMh2q6RpiSO929mKFQc+MiQOBzwWP5tCpFOy1ywMQ 0sxmqx24FzwVakd22k7/ =IWLS -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20200917-pull-request' into staging microvm: add acpi support # gpg: Signature made Thu 17 Sep 2020 14:53:06 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/microvm-20200917-pull-request: (21 commits) microvm: enable ramfb tests/acpi: update expected data files for microvm tests/acpi: add microvm test tests/acpi: allow override blkdev tests/acpi: allow microvm test data updates. microvm: wire up hotplug x86: move cpu hotplug from pc to x86 x86: move acpi_dev from pc/microvm x86: constify x86_machine_is_*_enabled microvm/acpi: disable virtio-mmio cmdline hack microvm/acpi: use seabios with acpi=on microvm/acpi: use GSI 16-23 for virtio microvm/acpi: add acpi_dsdt_add_virtio() for x86 microvm/acpi: add minimal acpi support microvm: make virtio irq base runtime configurable acpi: move acpi_dsdt_add_power_button() to ged acpi: ged: add x86 device variant. acpi: ged: add control regs seabios: add bios-microvm.bin binary seabios: add microvm config, update build rules ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Gerd Hoffmann
|
312354f8c9 |
tests/acpi: update expected data files for microvm
Also clear tests/qtest/bios-tables-test-allowed-diff.h Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200915120909.20838-21-kraxel@redhat.com |
||
|
Gerd Hoffmann
|
c06cbf3d79 |
tests/acpi: add microvm test
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-20-kraxel@redhat.com |
||
|
Gerd Hoffmann
|
3cac3784f7 |
tests/acpi: allow override blkdev
microvm needs virtio-blk instead of ide. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-19-kraxel@redhat.com |
||
|
Gerd Hoffmann
|
34b36c3bee |
tests/acpi: allow microvm test data updates.
Also add empty test data files. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200915120909.20838-18-kraxel@redhat.com |
||
|
Thomas Huth
|
d97b4b0d0c |
tests/qtest/qmp-cmd-test: Use inclusive language
We simply want to ignore certain queries here, so let's rather use the term 'ignore' to express this intention. Message-Id: <20200914163755.42618-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Alexander Bulekov
|
d287961f25 |
fuzz: Change the way we write qtest log to stderr
Telling QTest to log to /dev/fd/2, essentially results in dup(2). This is fine, if other code isn't logging to stderr. Otherwise, the order of the logs is mixed due to buffering issues, since two file-descriptors are used to write to the same file. We can avoid this, since just specifying "-qtest" sets the log fd to stderr. If we want to disable qtest logs, we can just add -qtest-log none. Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200819061110.1320568-2-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Alexander Bulekov
|
54c9e41d47 |
fuzz: Add support for custom fuzzing library
On oss-fuzz, we must use the LIB_FUZZING_ENGINE and CFLAGS environment variables, rather than -fsanitize=fuzzer. With this change, when LIB_FUZZING_ENGINE is set, the --enable-fuzzing configure option will use that environment variable during the linking stage, rather than -fsanitize=fuzzer Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200902173652.307222-3-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Alexander Bulekov
|
c46f76d158 |
meson: specify fuzz linker script as a project arg
With this change, the fuzzer-linker script should be specified outside any --start-group/--end-group pairs. We need this on oss-fuzz, where partially applying the linker-script results in a linker failure Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200902173652.307222-2-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
c138156ba5 |
meson: fix libqos linking
Add genh to the sources to avoid race conditions between QAPI file generation and libqos compilation. Make the name_suffix .fa for consistency with other link_whole static libraries and to work around a Meson issue where lots of linker flags are placed between -Wl,--start-group and -Wl,--end-group and this breaks the fork-fuzz.ld linker script. Reported-by: Claudio Fontana <cfontana@suse.de> Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
cc9962d8ea |
tests/qtest: do not list ahci-test twice
This is caught by "meson test", which complains about two tests with the
same name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200904120342.11370-1-pbonzini@redhat.com>
Fixes:
|
||
|
Markus Armbruster
|
3bc1b8ee8c |
libqtest: Rename qmp_assert_error_class() to qmp_expect_error_and_unref()
qmp_assert_error_class() does more than just assert: it also unrefs the @rsp argument. Rename to qmp_expect_error_and_unref() to reduce confusion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200902115733.1229537-1-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Philippe Mathieu-Daudé
|
978382b453 |
tests/qtest/ipmi-kcs: Fix assert side-effect
Fix assert side-effect reported by Coverity:
/qemu/tests/qtest/ipmi-kcs-test.c: 84 in kcs_wait_obf()
83 while (IPMI_KCS_CMDREG_GET_OBF() == 0) {
>>> CID 1432368: Incorrect expression (ASSERT_SIDE_EFFECT)
>>> Argument "--count" of g_assert() has a side effect. The containing function might work differently in a non-debug build.
84 g_assert(--count != 0);
Reported-by: Coverity (CID 1432368)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080801.160652-2-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Philippe Mathieu-Daudé
|
ed943cc934 |
tests/qtest/tpm: Declare input buffers const and static
The functions using these arrays expect a "const unsigned char *" argument, it is safe to declare these as 'static const'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902080909.161034-1-philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Philippe Mathieu-Daudé
|
df1a312fea |
tests/qtest/ahci: Improve error handling (NEGATIVE_RETURNS)
Fix an error handling issue reported by Coverity: /qemu/tests/qtest/ahci-test.c: 1452 in prepare_iso() 1444 int fd = mkstemp(cdrom_path); >>> CID 1432375: Error handling issues (NEGATIVE_RETURNS) >>> "fd" is passed to a parameter that cannot be negative. 1452 ret = write(fd, patt, size); Reported-by: Coverity (CID 1432375) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902080552.159806-1-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Ying Fang
|
e1647539b1 |
tests/bios-tables-test: add smbios cpu speed test
Add smbios type 4 CPU speed check for we added new options to set smbios type 4 "max speed" and "current speed". The default value should be 2000 when no option is specified, just as the old version did. We add the test case to one machine of each architecture, though it doesn't really run on aarch64 platform for smbios test can't run on uefi only platform yet. Signed-off-by: Ying Fang <fangying1@huawei.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-Id: <20200806035634.376-3-fangying1@huawei.com> |
||
|
Michael S. Tsirkin
|
af1dfe1ec0 |
acpi: update expected DSDT files with _UID changes
_UID of the PCI root has been changed to 0.
Update expected files accordingly, and re-enable their testing.
Full diff of changed files disassembly:
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.acpihmat.dsl /tmp/new/tests/data/acpi/pc/DSDT.acpihmat.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.acpihmat.dsl 2020-08-04 17:37:55.727798633 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.acpihmat.dsl 2020-08-04 17:42:57.258859861 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.bridge.dsl /tmp/new/tests/data/acpi/pc/DSDT.bridge.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.bridge.dsl 2020-08-04 17:37:55.737798601 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.bridge.dsl 2020-08-04 17:42:57.262859849 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.cphp.dsl /tmp/new/tests/data/acpi/pc/DSDT.cphp.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.cphp.dsl 2020-08-04 17:37:55.745798576 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.cphp.dsl 2020-08-04 17:42:57.265859839 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.dimmpxm.dsl /tmp/new/tests/data/acpi/pc/DSDT.dimmpxm.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.dimmpxm.dsl 2020-08-04 17:37:55.759798533 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.dimmpxm.dsl 2020-08-04 17:42:57.268859830 -0400
@@ -52,7 +52,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.dsl /tmp/new/tests/data/acpi/pc/DSDT.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.dsl 2020-08-04 17:37:55.713798676 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.dsl 2020-08-04 17:42:57.256859867 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.ipmikcs.dsl /tmp/new/tests/data/acpi/pc/DSDT.ipmikcs.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.ipmikcs.dsl 2020-08-04 17:37:55.765798514 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.ipmikcs.dsl 2020-08-04 17:42:57.270859824 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.memhp.dsl /tmp/new/tests/data/acpi/pc/DSDT.memhp.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.memhp.dsl 2020-08-04 17:37:55.773798489 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.memhp.dsl 2020-08-04 17:42:57.273859814 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/pc/DSDT.numamem.dsl /tmp/new/tests/data/acpi/pc/DSDT.numamem.dsl
--- /tmp/old/tests/data/acpi/pc/DSDT.numamem.dsl 2020-08-04 17:37:55.782798461 -0400
+++ /tmp/new/tests/data/acpi/pc/DSDT.numamem.dsl 2020-08-04 17:42:57.276859805 -0400
@@ -50,7 +50,7 @@
{
Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
}
}
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.acpihmat.dsl /tmp/new/tests/data/acpi/q35/DSDT.acpihmat.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.acpihmat.dsl 2020-08-04 17:37:55.911798060 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.acpihmat.dsl 2020-08-04 17:42:57.327859646 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.bridge.dsl /tmp/new/tests/data/acpi/q35/DSDT.bridge.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.bridge.dsl 2020-08-04 17:37:55.920798032 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.bridge.dsl 2020-08-04 17:42:57.331859634 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.cphp.dsl /tmp/new/tests/data/acpi/q35/DSDT.cphp.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.cphp.dsl 2020-08-04 17:37:55.930798001 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.cphp.dsl 2020-08-04 17:42:57.336859618 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.dimmpxm.dsl /tmp/new/tests/data/acpi/q35/DSDT.dimmpxm.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.dimmpxm.dsl 2020-08-04 17:37:55.942797963 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.dimmpxm.dsl 2020-08-04 17:42:57.340859606 -0400
@@ -53,7 +53,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.dsl /tmp/new/tests/data/acpi/q35/DSDT.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.dsl 2020-08-04 17:37:55.898798100 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.dsl 2020-08-04 17:42:57.323859659 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.ipmibt.dsl /tmp/new/tests/data/acpi/q35/DSDT.ipmibt.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.ipmibt.dsl 2020-08-04 17:37:55.952797932 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.ipmibt.dsl 2020-08-04 17:42:57.344859593 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.memhp.dsl /tmp/new/tests/data/acpi/q35/DSDT.memhp.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.memhp.dsl 2020-08-04 17:37:55.962797901 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.memhp.dsl 2020-08-04 17:42:57.348859581 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.mmio64.dsl /tmp/new/tests/data/acpi/q35/DSDT.mmio64.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.mmio64.dsl 2020-08-04 17:37:55.972797870 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.mmio64.dsl 2020-08-04 17:42:57.351859572 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.numamem.dsl /tmp/new/tests/data/acpi/q35/DSDT.numamem.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.numamem.dsl 2020-08-04 17:37:55.983797836 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.numamem.dsl 2020-08-04 17:42:57.354859562 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/q35/DSDT.tis.dsl /tmp/new/tests/data/acpi/q35/DSDT.tis.dsl
--- /tmp/old/tests/data/acpi/q35/DSDT.tis.dsl 2020-08-04 17:37:55.993797804 -0400
+++ /tmp/new/tests/data/acpi/q35/DSDT.tis.dsl 2020-08-04 17:42:57.358859550 -0400
@@ -51,7 +51,7 @@
Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID
Name (_ADR, Zero) // _ADR: Address
- Name (_UID, One) // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities
{
CreateDWordField (Arg3, Zero, CDW1)
diff -ru /tmp/old/tests/data/acpi/virt/DSDT.dsl /tmp/new/tests/data/acpi/virt/DSDT.dsl
--- /tmp/old/tests/data/acpi/virt/DSDT.dsl 2020-08-04 17:37:56.121797406 -0400
+++ /tmp/new/tests/data/acpi/virt/DSDT.dsl 2020-08-04 17:42:57.408859394 -0400
@@ -641,7 +641,7 @@
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
- Name (_UID, "PCI0") // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
diff -ru /tmp/old/tests/data/acpi/virt/DSDT.memhp.dsl /tmp/new/tests/data/acpi/virt/DSDT.memhp.dsl
--- /tmp/old/tests/data/acpi/virt/DSDT.memhp.dsl 2020-08-04 17:37:56.129797381 -0400
+++ /tmp/new/tests/data/acpi/virt/DSDT.memhp.dsl 2020-08-04 17:42:57.411859385 -0400
@@ -643,7 +643,7 @@
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
- Name (_UID, "PCI0") // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
diff -ru /tmp/old/tests/data/acpi/virt/DSDT.numamem.dsl /tmp/new/tests/data/acpi/virt/DSDT.numamem.dsl
--- /tmp/old/tests/data/acpi/virt/DSDT.numamem.dsl 2020-08-04 17:37:56.141797343 -0400
+++ /tmp/new/tests/data/acpi/virt/DSDT.numamem.dsl 2020-08-04 17:42:57.413859379 -0400
@@ -641,7 +641,7 @@
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
- Name (_UID, "PCI0") // _UID: Unique ID
+ Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Michael S. Tsirkin
|
42a62c2092 |
acpi: allow DSDT changes
We are updating all DSDTs with UID 0 for PCI Root. Allow changes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Peter Maydell
|
30aa19446d |
9pfs: Fix severe performance issue of Treaddir requests.
-----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAl8zvx0XHHFlbXVfb3Nz QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5Uthw//cXXwifzzjUaLccxkTCRejdZH tRLVhx8Asp4JG5WV+djF78dAh8UGw6DPMGIejqgZyBW3fDwQzbJGSycMWCfLtDwS 176rDS0yYfpHM4hVW3dVIvSC6ea1hXlzZQP4STe1ZSghVXYLjFLY6u5aFJmvtS2E vh33VecxE/MyKvJlTBpNG4h/oNz5PIJXPOsBI/N9kIX7sBDXZMI/X90SSJ0m/MJa heT/DRXTDJo+9m8K4Eibso/Akx8h+ZuyMwSR+b5e/9OKqylMdFKKBoGSSPDY2h8r q5OweV0Aewfj885qnD7BfH/Iis6re/qbFcQz6gxqZW0j/aW71yRoFXbFucvgX0ie 1HLiLHd/gv9HAwT8TeYUT7bldIDyk2jiD14cvhkE9PXlWmGigu0aMiXhPJ2/Jbx2 uJUIbLRXk6d/eds8q+2KO8+H6c6PmXMy40rqXDMFbUHCJIYDVH0K3hvH+4h8uE63 PKRuwoI+XOryw6dxEQlx206CfDUrjnZ+X4+v7UloTEy6/4BxlcagFQDCgyHEqyJL PVlkOjRyJWDt8Q1k6YpZImj+OaTzLmnLE8/ucLzCnaHEVqWQUJwwO/jeeCgFt3a0 oAUoTZUnpS7OM/oNWRx6YiheM8Ynk9nb6rAjeCpGnNgDhihq9Oh9/PKsXwTXUdyL sywT9dVI0Y4m3LyF7ok= =1Qh/ -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20200812' into staging 9pfs: Fix severe performance issue of Treaddir requests. # gpg: Signature made Wed 12 Aug 2020 11:06:21 BST # gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395 # gpg: issuer "qemu_oss@crudebyte.com" # gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4 # Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395 * remotes/cschoenebeck/tags/pull-9p-20200812: 9pfs: clarify latency of v9fs_co_run_in_worker() 9pfs: differentiate readdir lock between 9P2000.u vs. 9P2000.L 9pfs: T_readdir latency optimization 9pfs: add new function v9fs_co_readdir_many() 9pfs: split out fs driver core of v9fs_co_readdir() 9pfs: make v9fs_readdir_response_size() public tests/virtio-9p: added split readdir tests Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Paolo Bonzini
|
859aef026e |
meson: replace create-config with meson configure_file
Move the create-config logic to meson.build; create a configuration_data object and let meson handle the quoting and output. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
64ed6f92ff |
meson: link emulators without Makefile.target
The binaries move to the root directory, e.g. qemu-system-i386 or qemu-arm. This requires changes to qtests, CI, etc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
a2ce7dbd91 |
meson: convert tests/qtest to meson
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Christian Schoenebeck
|
46488b627a |
tests/virtio-9p: added split readdir tests
The previous, already existing 'basic' readdir test simply used a 'count' parameter big enough to retrieve all directory entries with a single Treaddir request. In the 3 new 'split' readdir tests added by this patch, directory entries are retrieved, split over several Treaddir requests by picking small 'count' parameters which force the server to truncate the response. So the test client sends as many Treaddir requests as necessary to get all directory entries. The following 3 new tests are added (executed in this sequence): 1. Split readdir test with count=512 2. Split readdir test with count=256 3. Split readdir test with count=128 This test case sequence is chosen because the smaller the 'count' value, the higher the chance of errors in case of implementation bugs on server side. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <569b2e05ab1d0223b14a12dfbdf3ad5e8b3ac131.1596012787.git.qemu_oss@crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> |
||
|
Alexander Bulekov
|
bcbad8b05c |
fuzz: Fix leak when assembling datadir path string
We freed the string containing the final datadir path, but did not free the path to the executable's directory that we get from g_path_get_dirname(). Fix that. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200717163523.1591-1-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Alexander Bulekov
|
f5ec79f5e0 |
fuzz: Expect the cmdline in a freeable GString
In the initial FuzzTarget, get_init_cmdline returned a char *. With this API, we had no guarantee about where the string came from. For example, i440fx-qtest-reboot-fuzz simply returned a pointer to a string literal, while the QOS-based targets build the arguments out in a GString an return the gchar *str pointer. Since we did not try to free the cmdline, we have a leak for any targets that do not simply return string literals. Clean up this mess by forcing fuzz-targets to return a GString, that we can free. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200714174616.20709-1-alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Li Qiang
|
15c51f724e |
tests: qmp-cmd-test: fix memory leak
Properly free each test response to avoid memory leak and separate
qtest_qmp() calls with spare lines, in a consistent manner.
Fixes: 5b88849e7b9("tests/qmp-cmd-test: Add qmp/object-add-failure-modes")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200715154117.15456-1-liq3ea@163.com>
Fixes:
|
||
|
Li Qiang
|
82e258db15 |
qtest: bios-tables-test: fix a memory leak
Fixes: 5da7c35e25a("bios-tables-test: Add Q35/TPM-TIS test")
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200714153536.66060-1-liq3ea@163.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Stefan Berger
|
df8a756893 |
tests: tpm: Skip over pcrUpdateCounter byte in result comparison
The TPM 2 code in libtpms was fixed to handle the PCR 'TCB group' according to the PCClient profile. The change of the PCRs belonging to the 'TCB group' now affects the pcrUpdateCounter in the TPM2_PCRRead() responses where its value is now different (typically lower by '1') than what it was before. To not fail the tests, we skip the comparison of the 14th byte, which represents the pcrUpdateCounter. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20200707201625.4177419-3-stefanb@linux.vnet.ibm.com |
||
|
Thomas Huth
|
2c65fefa05 |
tests/qtest/fuzz: Add missing spaces in description
There should be a space between "forking" and "for". Message-Id: <20200709083719.22221-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Alexander Bulekov
|
230225eaaa |
fuzz: add missing header for rcu_enable_atfork
In |
||
|
Peter Maydell
|
9f526fce49 |
Testing and misc build updates:
- tests/vm support for aarch64 VMs - tests/tcg better cross-compiler detection - update docker tooling to support registries - update docker support for xtensa - gitlab build docker images and store in registry - gitlab use docker images for builds - a number of skipIf updates to support move - linux-user MAP_FIXED_NOREPLACE fix - qht-bench compiler tweaks - configure fix for secret keyring - tsan fiber annotation clean-up - doc updates for mttcg/icount/gdbstub - fix cirrus to use brew bash for iotests - revert virtio-gpu breakage - fix LC_ALL to avoid sorting changes in iotests -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6 na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ== =HRWa -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging Testing and misc build updates: - tests/vm support for aarch64 VMs - tests/tcg better cross-compiler detection - update docker tooling to support registries - update docker support for xtensa - gitlab build docker images and store in registry - gitlab use docker images for builds - a number of skipIf updates to support move - linux-user MAP_FIXED_NOREPLACE fix - qht-bench compiler tweaks - configure fix for secret keyring - tsan fiber annotation clean-up - doc updates for mttcg/icount/gdbstub - fix cirrus to use brew bash for iotests - revert virtio-gpu breakage - fix LC_ALL to avoid sorting changes in iotests # gpg: Signature made Sat 11 Jul 2020 15:56:42 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits) iotests: Set LC_ALL=C for sort Revert "vga: build virtio-gpu as module" tests: fix "make check-qtest" for modular builds .cirrus.yml: add bash to the brew packages tests/docker: update toolchain set in debian-xtensa-cross tests/docker: fall back more gracefully when pull fails docs: Add to gdbstub documentation the PhyMemMode docs/devel: add some notes on tcg-icount for developers docs/devel: convert and update MTTCG design document tests/qht-bench: Adjust threshold computation tests/qht-bench: Adjust testing rate by -1 travis.yml: Test also the other targets on s390x shippable: pull images from registry instead of building testing: add check-build target containers.yml: build with docker.py tooling gitlab: limit re-builds of the containers tests: improve performance of device-introspect-test gitlab: add avocado asset caching gitlab: enable check-tcg for linux-user tests linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Peter Maydell
|
d34498309c |
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept improving the code over various series. List of people who help him (in chronological order): - Richard Henderson - Sarah Harris and Edward Robbins - Philippe Mathieu-Daudé and Aleksandar Markovic - Pavel Dovgalyuk - Thomas Huth [*] The oldest contribution I could find on the list is from 2016: https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html Tests included: $ avocado --show=app run -t arch:avr tests/acceptance/ Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 2.35 s $ make check-qtest-avr TEST check-qtest-avr: tests/qtest/boot-serial-test TEST check-qtest-avr: tests/qtest/cdrom-test TEST check-qtest-avr: tests/qtest/device-introspect-test TEST check-qtest-avr: tests/qtest/machine-none-test TEST check-qtest-avr: tests/qtest/qmp-test TEST check-qtest-avr: tests/qtest/qmp-cmd-test TEST check-qtest-avr: tests/qtest/qom-test TEST check-qtest-avr: tests/qtest/test-hmp TEST check-qtest-avr: tests/qtest/qos-test CI results: . https://cirrus-ci.com/build/5697049146425344 . https://gitlab.com/philmd/qemu/-/pipelines/165328058 . https://travis-ci.org/github/philmd/qemu/builds/705817933 . https://app.shippable.com/github/philmd/qemu/runs/822/summary/console -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl8JgE8ACgkQ4+MsLN6t wN5KMhAA1IivMK9uD9x8vOK3H1fSIju6ufJz7mlynDXG/LV0dhms1t8n/AlPE/Gk TLhBUBwwdsejVDrTu6GGukoybsKLyULdt8MIK5z6bd++TwY3MlUkdOJeteviBUuP 0hcagNR/Dyg1WLAq/VH4KGHfzisprfDM7sXTvjE3raKBSpqIwO5tfUn4kVm/LWB9 sQNsVbtyKqnM3UW+QYGAN3eGAOM2SWx8pUZqV+UrDDEDoFJIiip7jxoN1t7PJaQp O6t2/omLzbOMrpwqmNAIfrsMjovRylrd8nDGlX/OF5SrEbwXi3qvdJBtEOdBPasp owXbu2Uwo4VUu5x7kzAiTlflBBSOmDpILbYVn5jGLKMZmOjLTPVbrzMKGZqx5GXD gWmmX2aD8ejl2XGmKM+gC1smQJ6/aMTILoYXq97hIKi8pMH7AB2a8Tmzseiqx/E/ Lz1DrrnIW5vwFQAPnhdJCU1GF3B9VUcHG3w0sjvgGKDfpe8tLEgkmISi7CUbbA9/ rJs2P24haqfdFXWLQU2sO1ygTR1vLNy5/ZbU1nyrAPpjWnGeX6GXVaWGQo83BaDd rIfnx0upNYFdaO5Vi4cbHUFGe1fVuR3C/l1xiDbmnzx3yMgys3036Equ2h3fSPqO 4k79bee9ByAUl1YE0X8T4gasCRS6RaSWXZYz7lfdc9h5hGny8LM= =gFE5 -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging 8bit AVR port from Michael Rolnik. Michael started to work on the AVR port few years ago [*] and kept improving the code over various series. List of people who help him (in chronological order): - Richard Henderson - Sarah Harris and Edward Robbins - Philippe Mathieu-Daudé and Aleksandar Markovic - Pavel Dovgalyuk - Thomas Huth [*] The oldest contribution I could find on the list is from 2016: https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html Tests included: $ avocado --show=app run -t arch:avr tests/acceptance/ Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 2.35 s $ make check-qtest-avr TEST check-qtest-avr: tests/qtest/boot-serial-test TEST check-qtest-avr: tests/qtest/cdrom-test TEST check-qtest-avr: tests/qtest/device-introspect-test TEST check-qtest-avr: tests/qtest/machine-none-test TEST check-qtest-avr: tests/qtest/qmp-test TEST check-qtest-avr: tests/qtest/qmp-cmd-test TEST check-qtest-avr: tests/qtest/qom-test TEST check-qtest-avr: tests/qtest/test-hmp TEST check-qtest-avr: tests/qtest/qos-test CI results: . https://cirrus-ci.com/build/5697049146425344 . https://gitlab.com/philmd/qemu/-/pipelines/165328058 . https://travis-ci.org/github/philmd/qemu/builds/705817933 . https://app.shippable.com/github/philmd/qemu/runs/822/summary/console # gpg: Signature made Sat 11 Jul 2020 10:03:11 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits) target/avr/disas: Fix store instructions display order target/avr/cpu: Fix $PC displayed address target/avr/cpu: Drop tlb_flush() in avr_cpu_reset() target/avr: Add section into QEMU documentation tests/acceptance: Test the Arduino MEGA2560 board tests/boot-serial: Test some Arduino boards (AVR based) hw/avr: Add limited support for some Arduino boards hw/avr: Add some ATmega microcontrollers hw/avr: Add support for loading ELF/raw binaries hw/misc: avr: Add limited support for power reduction device hw/timer: avr: Add limited support for 16-bit timer peripheral hw/char: avr: Add limited support for USART peripheral tests/machine-none: Add AVR support target/avr: Register AVR support with the rest of QEMU target/avr: Add support for disassembling via option '-d in_asm' target/avr: Initialize TCG register variables target/avr: Add instruction translation - CPU main translation function target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr: Add instruction translation - Data Transfer Instructions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Gerd Hoffmann
|
024ce1ef7c |
tests: fix "make check-qtest" for modular builds
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200710203652.9708-2-kraxel@redhat.com> |
||
|
Daniel P. Berrangé
|
3e7b80f84d |
tests: improve performance of device-introspect-test
Total execution time with "-m slow" and x86_64 QEMU, drops from 3 minutes 15 seconds, down to 54 seconds. Individual tests drop from 17-20 seconds, down to 3-4 seconds. The cost of this change is that any QOM bugs resulting in the test failure will not be directly associated with the device that caused the failure. The test case is not frequently identifying such bugs though, and the cause is likely easily visible in the patch series that causes the failure. So overall the shorter running time is considered the more important factor. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Add the tree check to test_device_intro_none() and test_device_intro_abstract(), too, just to be sure...] Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200710060719.22386-1-thuth@redhat.com> |