move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
real_dirty_pages becomes equal to total ram size after dirty log sync
in ram_init_bitmaps, the reason is that the bitmap of ramblock is
initialized to be all set, so old path counts them as "real dirty" at
beginning.
This causes wrong dirty rate and false positive throttling.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200622032037.31112-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's reported an error of implicit conversion from "unsigned long" to
"double" when compiling with Clang 10. Simply make the encoding rate 0
when the encoded_size is 0.
Fixes: e460a4b1a4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we suceed in receiving ram state, but fail receiving the device
state, there will be a mismatch between the two.
Fix this by flushing the ram cache only after the vmstate has been
received.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <3289d007d494cb0e2f05b1cf4ae6a78d300fede3.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.
Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Let's consolidate resetting the variables.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200421085300.7734-10-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixup for context conflicts with 91ba442
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.
If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.
Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
local_err is used again in migration_bitmap_sync_precopy() after
precopy_notify(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-6-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is only need to record bitmap of dirty pages while goes
into COLO stage.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200224065414.36524-6-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch will reduce the downtime of VM for the initial process,
Previously, we copied all these memory in preparing stage of COLO
while we need to stop VM, which is a time-consuming process.
Here we optimize it by a trick, back-up every page while in migration
process while COLO is enabled, though it affects the speed of the
migration, but it obviously reduce the downtime of back-up all SVM'S
memory in COLO preparing stage.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200224065414.36524-5-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
minor typo fixes
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.
If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.
The default value is 50 and valid range is 1 to 100.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It will be used later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
No comp value needs to be zero.
We need to change the full chain to pass the Error parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the multifd_send_threads is not created when migration is failed,
multifd_save_cleanup would be called twice. In this senario, the
multifd_send_state is accessed after it has been released, the result
is that the source VM is crashing down.
Here is the coredump stack:
Program received signal SIGSEGV, Segmentation fault.
0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012
1012 MultiFDSendParams *p = &multifd_send_state->params[i];
#0 0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012
#1 0x00005629333ab8a9 in multifd_save_cleanup () at migration/ram.c:1028
#2 0x00005629333abaea in multifd_new_send_channel_async (task=0x562935450e70, opaque=<optimized out>) at migration/ram.c:1202
#3 0x000056293373a562 in qio_task_complete (task=task@entry=0x562935450e70) at io/task.c:196
#4 0x000056293373a6e0 in qio_task_thread_result (opaque=0x562935450e70) at io/task.c:111
#5 0x00007f475d4d75a7 in g_idle_dispatch () from /usr/lib64/libglib-2.0.so.0
#6 0x00007f475d4da9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#7 0x0000562933785b33 in glib_pollfds_poll () at util/main-loop.c:219
#8 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
#9 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:518
#10 0x00005629334c5acf in main_loop () at vl.c:1810
#11 0x000056293334d7bb in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4471
If the multifd_send_threads is not created when migration is failed.
In this senario, we don't call multifd_save_cleanup in multifd_new_send_channel_async.
Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we do a cancel, we got out without one error, but we can't do the
rest of the output as in a normal situation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We transmit ram_addr_t always as uint64_t. Be consistent in its
use (on 64bit system, it is always uint64_t problem is 32bits).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added type conversions to ram_addr_t before all left shifts of page
indexes to TARGET_PAGE_BITS, to correct overflows when the page
address was 4Gb and more.
Signed-off-by: Alexey Romko <nevilad@yahoo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One multifd will lock all the other multifds' IOChannel mutex to inform them
to quit by setting p->quit or shutting down p->c. In this senario, if some
multifds had already been terminated and multifd_load_cleanup/multifd_save_cleanup
had destroyed their mutex, it could cause destroyed mutex access when trying
lock their mutex.
Here is the coredump stack:
#0 0x00007f81a2794437 in raise () from /usr/lib64/libc.so.6
#1 0x00007f81a2795b28 in abort () from /usr/lib64/libc.so.6
#2 0x00007f81a278d1b6 in __assert_fail_base () from /usr/lib64/libc.so.6
#3 0x00007f81a278d262 in __assert_fail () from /usr/lib64/libc.so.6
#4 0x000055eb1bfadbd3 in qemu_mutex_lock_impl (mutex=0x55eb1e2d1988, file=<optimized out>, line=<optimized out>) at util/qemu-thread-posix.c:64
#5 0x000055eb1bb4564a in multifd_send_terminate_threads (err=<optimized out>) at migration/ram.c:1015
#6 0x000055eb1bb4bb7f in multifd_send_thread (opaque=0x55eb1e2d19f8) at migration/ram.c:1171
#7 0x000055eb1bfad628 in qemu_thread_start (args=0x55eb1e170450) at util/qemu-thread-posix.c:502
#8 0x00007f81a2b36df5 in start_thread () from /usr/lib64/libpthread.so.0
#9 0x00007f81a286048d in clone () from /usr/lib64/libc.so.6
To fix it up, let's destroy the mutex after all the other multifd threads had
been terminated.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One multifd channel will shutdown all the other multifd's IOChannel when it
fails to receive an IOChannel. In this senario, if some multifds had not
received its IOChannel yet, it would try to shutdown its IOChannel which could
cause nullptr access at qio_channel_shutdown.
Here is the coredump stack:
#0 object_get_class (obj=obj@entry=0x0) at qom/object.c:908
#1 0x00005563fdbb8f4a in qio_channel_shutdown (ioc=0x0, how=QIO_CHANNEL_SHUTDOWN_BOTH, errp=0x0) at io/channel.c:355
#2 0x00005563fd7b4c5f in multifd_recv_terminate_threads (err=<optimized out>) at migration/ram.c:1280
#3 0x00005563fd7bc019 in multifd_recv_new_channel (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce00) at migration/ram.c:1478
#4 0x00005563fda82177 in migration_ioc_process_incoming (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce30) at migration/migration.c:605
#5 0x00005563fda8567d in migration_channel_process_incoming (ioc=0x556400255610) at migration/channel.c:44
#6 0x00005563fda83ee0 in socket_accept_incoming_migration (listener=0x5563fff6b920, cioc=0x556400255610, opaque=<optimized out>) at migration/socket.c:166
#7 0x00005563fdbc25cd in qio_net_listener_channel_func (ioc=<optimized out>, condition=<optimized out>, opaque=<optimized out>) at io/net-listener.c:54
#8 0x00007f895b6fe9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#9 0x00005563fdc18136 in glib_pollfds_poll () at util/main-loop.c:218
#10 0x00005563fdc181b5 in os_host_main_loop_wait (timeout=1000000000) at util/main-loop.c:241
#11 0x00005563fdc183a2 in main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:517
#12 0x00005563fd8edb37 in main_loop () at vl.c:1791
#13 0x00005563fd74fd45 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4473
To fix it up, let's check p->c before calling qio_channel_shutdown.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't support multifd during postcopy, but user still could enable
both multifd and postcopy. This leads to migration failure.
Skip multifd during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is a preparation for the next patch:
not use multifd during postcopy.
Without enabling postcopy, everything looks good. While after enabling
postcopy, migration may fail even not use multifd during postcopy. The
reason is the pages is not properly cleared and *old* target page will
continue to be transferred.
After clean pages, migration succeeds.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy requires to place a whole host page, while migration thread
migrate memory in target page size. This makes postcopy need to collect
all target pages in one host page before placing via userfaultfd.
To enable compress during postcopy, there are two problems to solve:
1. Random order for target page arrival
2. Target pages in one host page arrives without interrupt by target
page from other host page
The first one is handled by previous cleanup patch.
This patch handles the second one by:
1. Flush compress thread for each host page
2. Wait for decompress thread for before placing host page
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After using number of target page received to track one host page, we
could have the capability to handle random order target page arrival in
one host page.
This is a preparation for enabling compress during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For the first target page, all_zero is set to true for this round check.
After target_pages introduced, we could leverage this variable instead
of checking the address offset.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, it requires to place whole host page instead of target
page.
Currently, it relies on the page offset to decide whether this is the
last target page. We also can count the target page number during the
iteration. When the number of target page equals
(host page size / target page size), this means it is the last target
page in the host page.
This is a preparation for non-ordered target page transmission.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Compress is not supported with postcopy, it is safe to wait for
decompress thread just in precopy.
This is a preparation for later patch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this case, page_buffer content would not be used.
Skip this to save some time.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Usually, incoming migration coroutine yields to the main loop
while its IO-channel is waiting for data to receive. But there is a case
when RAM migration and data receive have the same speed: VM with huge
zeroed RAM. In this case, IO-channel won't read and thus the main loop
is stuck and for instance, it doesn't respond to QMP commands.
For this case, yield periodically, but not too often, so as not to
affect the speed of migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When using hugepages, rate limiting is necessary within each huge
page, since a 1G huge page can take a significant time to send, so
you end up with bursty behaviour.
Fixes: 4c011c37ec ("postcopy: Send whole huge pages")
Reported-by: Lin Ma <LMa@suse.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ram_save_queue_pages() has an 'err' label that can be replaced by
'return -1' instead.
Same thing with ram_discard_range(), and in this case we can also
get rid of the 'ret' variable and return either '-1' on error
or the result of ram_block_discard_range().
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we are exiting due to an error/finish/.... Just don't try to even
touch the channel with one IO operation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fill everything with zero, so the padding fields are also initialized.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use WITH_RCU_READ_LOCK_GUARD to avoid exiting colo_init_ram_cache
without releasing RCU.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
../migration/ram.c: In function ‘multifd_recv_thread’:
/home/elmarco/src/qq/include/qapi/error.h:165:5: error: ‘block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
165 | error_setg_internal((errp), __FILE__, __LINE__, __func__, \
| ^~~~~~~~~~~~~~~~~~~
../migration/ram.c:818:15: note: ‘block’ was declared here
818 | RAMBlock *block;
| ^~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to ram block writeback for pmem migration.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20191121000843.24844-4-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we found an available channel in multifd_send_pages(), its
pages->used is cleared and then attached to multifd_send_state.
It is not necessary to do this twice.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-5-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MultiFDPacket_t's magic and version field never changes during
migration, so move these two fields in setup stage.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-4-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_send_fill_packet() prepares meta data for following pages to
transfer. It would be more proper to fill pages->allocated instead of
static max value, especially we want to support flexible packet size.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-3-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
