QEMU system mode page table walks are expensive. Taken by running QEMU
qemu-system-x86_64 system mode on Intel PIN , a TLB miss and walking a
4-level page tables in guest Linux OS takes ~450 X86 instructions on
average.
QEMU system mode TLB is implemented using a directly-mapped hashtable.
This structure suffers from conflict misses. Increasing the
associativity of the TLB may not be the solution to conflict misses as
all the ways may have to be walked in serial.
A victim TLB is a TLB used to hold translations evicted from the
primary TLB upon replacement. The victim TLB lies between the main TLB
and its refill path. Victim TLB is of greater associativity (fully
associative in this patch). It takes longer to lookup the victim TLB,
but its likely better than a full page table walk. The memory
translation path is changed as follows :
Before Victim TLB:
1. Inline TLB lookup
2. Exit code cache on TLB miss.
3. Check for unaligned, IO accesses
4. TLB refill.
5. Do the memory access.
6. Return to code cache.
After Victim TLB:
1. Inline TLB lookup
2. Exit code cache on TLB miss.
3. Check for unaligned, IO accesses
4. Victim TLB lookup.
5. If victim TLB misses, TLB refill
6. Do the memory access.
7. Return to code cache
The advantage is that victim TLB can offer more associativity to a
directly mapped TLB and thus potentially fewer page table walks while
still keeping the time taken to flush within reasonable limits.
However, placing a victim TLB before the refill path increase TLB
refill path as the victim TLB is consulted before the TLB refill. The
performance results demonstrate that the pros outweigh the cons.
some performance results taken on SPECINT2006 train
datasets and kernel boot and qemu configure script on an
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz Linux machine are shown in the
Google Doc link below.
https://docs.google.com/spreadsheets/d/1eiItzekZwNQOal_h-5iJmC4tMDi051m9qidi5_nwvH4/edit?usp=sharing
In summary, victim TLB improves the performance of qemu-system-x86_64 by
11% on average on SPECINT2006, kernelboot and qemu configscript and with
highest improvement of in 26% in 456.hmmer. And victim TLB does not result
in any performance degradation in any of the measured benchmarks. Furthermore,
the implemented victim TLB is architecture independent and is expected to
benefit other architectures in QEMU as well.
Although there are measurement fluctuations, the performance
improvement is very significant and by no means in the range of
noises.
Signed-off-by: Xin Tong <trent.tong@gmail.com>
Message-id: 1407202523-23553-1-git-send-email-trent.tong@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add instructions of SC opcode format.
Add helper for begin interrupt service routine.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-14-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add instructions of SSRS and SLRO opcode format.
Add micro-op generator functions for offset loads.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1409572800-4116-10-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add instructions of SSR opcode format.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1409572800-4116-9-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
1. s390x/kvm: avoid synchronize_rcu's in kernel
----------------------------------------------
The first patches change s390x/kvm code to issue VCPU specific ioctls
from the VCPU thread. This will avoid unnecessary synchronize_rcu in
the kernel, which caused a noticably slowdown with many guest CPUs.
It speeds up all start/restart/reset operations involving cpus
drastically.
2. s390-ccw.img: block size and DASD format support
---------------------------------------------------
The second part changes the s390-ccw bios to IPL (boot) more disk
formats than before. Furthermore a small fix is made to the console
output of the bios.
3. s390: Support for Hotplug of Standby Memory
----------------------------------------------
The third part adds support in s390 for a pool of standby memory,
which can be set online/offline by the guest (ie, via chmem).
The standby pool of memory is allocated as the difference between
the initial memory setting and the maxmem setting.
As part of this work, additional results are provided for the
Read SCP Information SCLP, and new implentation is added for the
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage SCLPs, which enables the s390
guest to manipulate the standby memory pool.
This patchset is based on work originally done by Jeng-Fang (Nick)
Wang.
Sample qemu command snippet:
qemu -machine s390-ccw-virtio -m 1024M,maxmem=2048M,slots=32 -enable-kvm
This will allocate 1024M of active memory, and another 1024M
of standby memory. Example output from s390-tools lsmem:
=============================================================================
0x0000000000000000-0x000000000fffffff 256 online no 0-127
0x0000000010000000-0x000000001fffffff 256 online yes 128-255
0x0000000020000000-0x000000003fffffff 512 online no 256-511
0x0000000040000000-0x000000007fffffff 1024 offline - 512-1023
Memory device size : 2 MB
Memory block size : 256 MB
Total online memory : 1024 MB
Total offline memory: 1024 MB
The guest can dynamically enable part or all of the standby pool
via the s390-tools chmem, for example:
chmem -e 512M
And can attempt to dynamically disable:
chmem -d 512M
4. s390x/gdb: various fixes
---------------------------
* Patch 1 fixes a bug where the cc was changed accidentally.
* Patch 2 adds the gdb feature XML files for s390x
* Patch 3 Define acr and fpr registers as coprocessor registers. This allows us
to reuse the feature XML files.
* Patch 4 whitespace fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bRo5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140901' into staging
s390x/kvm: Several updates/fixes/features
1. s390x/kvm: avoid synchronize_rcu's in kernel
----------------------------------------------
The first patches change s390x/kvm code to issue VCPU specific ioctls
from the VCPU thread. This will avoid unnecessary synchronize_rcu in
the kernel, which caused a noticably slowdown with many guest CPUs.
It speeds up all start/restart/reset operations involving cpus
drastically.
2. s390-ccw.img: block size and DASD format support
---------------------------------------------------
The second part changes the s390-ccw bios to IPL (boot) more disk
formats than before. Furthermore a small fix is made to the console
output of the bios.
3. s390: Support for Hotplug of Standby Memory
----------------------------------------------
The third part adds support in s390 for a pool of standby memory,
which can be set online/offline by the guest (ie, via chmem).
The standby pool of memory is allocated as the difference between
the initial memory setting and the maxmem setting.
As part of this work, additional results are provided for the
Read SCP Information SCLP, and new implentation is added for the
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage SCLPs, which enables the s390
guest to manipulate the standby memory pool.
This patchset is based on work originally done by Jeng-Fang (Nick)
Wang.
Sample qemu command snippet:
qemu -machine s390-ccw-virtio -m 1024M,maxmem=2048M,slots=32 -enable-kvm
This will allocate 1024M of active memory, and another 1024M
of standby memory. Example output from s390-tools lsmem:
=============================================================================
0x0000000000000000-0x000000000fffffff 256 online no 0-127
0x0000000010000000-0x000000001fffffff 256 online yes 128-255
0x0000000020000000-0x000000003fffffff 512 online no 256-511
0x0000000040000000-0x000000007fffffff 1024 offline - 512-1023
Memory device size : 2 MB
Memory block size : 256 MB
Total online memory : 1024 MB
Total offline memory: 1024 MB
The guest can dynamically enable part or all of the standby pool
via the s390-tools chmem, for example:
chmem -e 512M
And can attempt to dynamically disable:
chmem -d 512M
4. s390x/gdb: various fixes
---------------------------
* Patch 1 fixes a bug where the cc was changed accidentally.
* Patch 2 adds the gdb feature XML files for s390x
* Patch 3 Define acr and fpr registers as coprocessor registers. This allows us
to reuse the feature XML files.
* Patch 4 whitespace fixes
# gpg: Signature made Mon 01 Sep 2014 12:53:39 BST using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
* remotes/borntraeger/tags/kvm-s390-20140901:
s390x/gdb: coding style fixes
s390x/gdb: generate target.xml and handle fp/ac as coprocessors
s390x/gdb: add the feature xml files for s390x
s390x/gdb: don't touch the cc if tcg is not enabled
sclp-s390: Add memory hotplug SCLPs
s390-virtio: Apply same memory boundaries as virtio-ccw
virtio-ccw: Include standby memory when calculating storage increment
sclp-s390: Add device to manage s390 memory hotplug
pc-bios/s390-ccw.img binary update
pc-bios/s390-ccw: Do proper console setup
pc-bios/s390-ccw: IPL from DASD with format variations
pc-bios/s390-ccw Really big EAV ECKD DASD handling
pc-bios/s390-ccw Improve ECKD informational message
pc-bios/s390-ccw: handle more ECKD DASD block sizes
pc-bios/s390-ccw: support all virtio block size
s390x/kvm: execute the first cpu reset on the vcpu thread
s390x/kvm: execute "system reset" cpu resets on the vcpu thread
s390x/kvm: execute sigp orders on the target vcpu thread
s390x/kvm: run guest triggered resets on the target vcpu thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Damn, the dirty rectangle values are signed integers. So the checks
added by commit 788fbf042f are not good
enough, we also have to make sure they are not negative.
[ Note: There must be something broken in spice-server so we get
negative values in the first place. Bug opened:
https://bugzilla.redhat.com/show_bug.cgi?id=1135372 ]
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch cleanes up two coding style issues (missing whitespaces).
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch reduces the core registers to the psw and the general purpose
registers. The fpc and ac registers are handled as coprocessors registers by gdb.
This allows to reuse the feature xml files taken from gdb without further
modification and is what other architectures do.
The target.xml is now generated and provided to the gdb client. Therefore, the
client doesn't have to guess which registers are available at which logical
register number.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the relevant s390x feature xml files taken from gdb.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When reading/writing the psw mask, the condition code may only be touched if
running on tcg.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add memory information to read SCP info and add handlers for
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Although s390-virtio won't support memory hotplug, it should
enforce the same memory boundaries so that it can use shared codepaths
(like read_SCP_info).
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When determining the memory increment size, use the maxmem size if
it was specified.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add sclpMemoryHotplugDev to contain associated data structures, etc.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rebuild of s390-ccw.img containing these patches:
pc-bios/s390-ccw: Do proper console setup
pc-bios/s390-ccw: support all virtio block size
pc-bios/s390-ccw: handle more ECKD DASD block sizes
pc-bios/s390-ccw Improve ECKD informational message
pc-bios/s390-ccw Really big EAV ECKD DASD handling
pc-bios/s390-ccw: IPL from DASD with format variations
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The final newline/return must happen before we reset the sclp via
diag 308.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There are two known cases of DASD format where signatures are
incomplete or absent:
1. result of <dasdfmt -d ldl -L ...> (ECKD_LDL_UNLABELED)
2. CDL with zero keys in IPL1 and IPL2 records
Now the code attempts to
1. find zIPL and use SCSI layout
2. find IPL1 and use CDL layout
3. find CMS1 and use LDL layout
3. find LNX1 and use LDL layout
4. find zIPL and use unlabeled LDL layout
5. find zIPL and use CDL layout
6. die
in this sequence.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For EAV ECKD DASD, the cylinder count will have the magic value
0xfffeU. Therefore, use the block number to test for valid eckd
addresses instead.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Using dasdfmt(8) to format a DASD allows to choose a block size.
There are four supported values: 512, 1024, 2048, and 4096 bytes
per block. Each block size leads to selection of new count of
sectors per track. The head count remains always the same: 15.
This empiric knowledge is used to detect ECKD DASD to IPL from.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The block size value may be given "as is" OR as a base value and
a shift count (exponent). So, we have to use calculation to get
the proper number in the code.
The main expression reads as
(blk_cfg.blk_size << blk_cfg.physical_block_exp)
E.g., various combinations between blk_size=1/physical_block_exp=12
and blk_size=4096/physical_block_exp=0 are valid for 4K blocks.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As all full cpu resets currently call into the kernel to do initial cpu reset,
let's run this reset (triggered by cpu_s390x_init()) on the proper vcpu thread.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's execute resets triggered by qemu system resets on the target vcpu thread.
This will avoid synchronize_rcu's in the kernel.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sigp orders that can result in ioctls on the target vcpu should be executed
on the associated vcpu thread.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, load_normal_reset() and modified_clear_reset() as triggered
by a guest vcpu will initiate cpu resets on the current vcpu thread for
all cpus. The reset should happen on the individual vcpu thread
instead, so let's use run_on_cpu() for this.
This avoids calls to synchronize_rcu() in the kernel.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUAKmWAAoJEJykq7OBq3PIryQIAI95aVunM1Z+bqEQiL9zE9kg
FNyfFo90w38yJjbizHi38XcjLGoTfvAks3gXdE6qhp7k+HQdp6yVdKJK3cFYzGTs
1OKrUrO+eSe7Qv+OHXtG8Fu7+WI8CzwsJZxUuQrgGcuYvryUdW2X6n/SQhoRDeyx
6iYo7uBSo7f+TUMlvqsEz+NAi6EQ86iE75WDOO5/86TLBQruJXSkyyiWVwZxTT3P
WCSuCWRLAKvlTgBZtX6n74r5GNoyM0ytvDc3+yzYXYVbjjdvoBqxxq/qXrPy0gs8
BoKztYNTge2pL4SVvycyM9GOkaTa1N+rog6sKdhYWTXe3wd4QFNJ5axxWJiNNFU=
=b0Vy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 29 Aug 2014 17:25:58 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (35 commits)
quorum: Fix leak of opts in quorum_open
blkverify: Fix leak of opts in blkverify_open
nfs: Fix leak of opts in nfs_file_open
curl: Don't deref NULL pointer in call to aio_poll.
curl: Allow a cookie or cookies to be sent with http/https requests.
virtio-blk: allow drive_del with dataplane
block: acquire AioContext in do_drive_del()
linux-aio: avoid deadlock in nested aio_poll() calls
qemu-iotests: add multiwrite test cases
block: fix overlapping multiwrite requests
nbd: Follow the BDS' AIO context
block: Add AIO context notifiers
nbd: Drop nbd_can_read()
sheepdog: fix a core dump while do auto-reconnecting
aio-win32: add support for sockets
qemu-coroutine-io: fix for Win32
AioContext: introduce aio_prepare
aio-win32: add aio_set_dispatching optimization
test-aio: test timers on Windows too
AioContext: export and use aio_dispatch
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 63f0f45f2e the following
mechanical change was made:
if (!state) {
- qemu_aio_wait();
+ aio_poll(state->s->aio_context, true);
}
The new code now checks if state is NULL and then dereferences it
('state->s') which is obviously incorrect.
This commit replaces state->s->aio_context with
bdrv_get_aio_context(bs), fixing this problem. The two other hunks
are concerned with getting the BlockDriverState pointer bs to where it
is needed.
The original bug causes a segfault when using libguestfs to access a
VMware vCenter Server and doing any kind of complex read-heavy
operations. With this commit the segfault goes away.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to access VMware ESX efficiently, we need to send a session
cookie. This patch is very simple and just allows you to send that
session cookie. It punts on the question of how you get the session
cookie in the first place, but in practice you can just run a `curl'
command against the server and extract the cookie that way.
To use it, add file.cookie to the curl URL. For example:
$ qemu-img info 'json: {
"file.driver":"https",
"file.url":"https://vcenter/folder/Windows%202003/Windows%202003-flat.vmdk?dcPath=Datacenter&dsName=datastore1",
"file.sslverify":"off",
"file.cookie":"vmware_soap_session=\"52a01262-bf93-ccce-d379-8dabb3e55560\""}'
image: [...]
file format: raw
virtual size: 8.0G (8589934592 bytes)
disk size: unavailable
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that drive_del acquires the AioContext we can safely allow deleting
the drive. As with non-dataplane mode, all I/Os submitted by the guest
after drive_del will return EIO.
This patch makes hot unplug work with virtio-blk dataplane. Previously
drive_del reported an error because the device was busy.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make drive_del safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Note the assumption that AioContext's lifetime exceeds DriveInfo and
BlockDriverState. We release AioContext after DriveInfo and
BlockDriverState are potentially freed.
This is clearly safe with the global AioContext but also with -object
iothread and implicit iothreads created by -device
virtio-blk-pci,x-data-plane=on (their lifetime is tied to DeviceState,
not BlockDriverState).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If two Linux AIO request completions are fetched in the same
io_getevents() call, QEMU will deadlock if request A's callback waits
for request B to complete using an aio_poll() loop. This was reported
to happen with the mirror blockjob.
This patch moves completion processing into a BH and makes it resumable.
Nested event loops can resume completion processing so that request B
will complete and the deadlock will not occur.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Marcin Gibuła <m.gibula@beyond.pl>
Reported-by: Marcin Gibuła <m.gibula@beyond.pl>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Marcin Gibuła <m.gibula@beyond.pl>
* support PMCCNTR in ARMv8
* various GIC fixes and cleanups
* Correct Cortex-A57 ISAR5 and AA64ISAR0 ID register values
* Fix regression that disabled VFP for ARMv5 CPUs
* Update to upstream VIXL 1.5
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6waG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140829' into staging
target-arm queue:
* support PMCCNTR in ARMv8
* various GIC fixes and cleanups
* Correct Cortex-A57 ISAR5 and AA64ISAR0 ID register values
* Fix regression that disabled VFP for ARMv5 CPUs
* Update to upstream VIXL 1.5
# gpg: Signature made Fri 29 Aug 2014 15:34:47 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140829:
target-arm: Implement pmccfiltr_write function
target-arm: Remove old code and replace with new functions
target-arm: Implement pmccntr_sync function
target-arm: Add arm_ccnt_enabled function
target-arm: Implement PMCCNTR_EL0 and related registers
arm: Implement PMCCNTR 32b read-modify-write
target-arm: Make the ARM PMCCNTR register 64-bit
hw/intc/arm_gic: honor target mask in gic_update()
aarch64: raise max_cpus to 8
arm_gic: Use GIC_NR_SGIS constant
arm_gic: Do not force PPIs to edge-triggered mode
arm_gic: GICD_ICFGR: Write model only for pre v1 GICs
arm_gic: Fix read of GICD_ICFGR
target-arm: Correct Cortex-A57 ISAR5 and AA64ISAR0 ID register values
target-arm: Fix regression that disabled VFP for ARMv5 CPUs
disas/libvixl: Update to upstream VIXL 1.5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the function that is called when writing to the
PMCCFILTR_EL0 register
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 73da3da6404855b17d5ae82975a32ff3a4dcae3d.1409025949.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
