The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk. Do these unconditionally,
which also prepares the code for the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a simple helper function, that will return the base image
of a given image chain.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_find_overlay(), and bdrv_drop_intermediate().
bdrv_find_overlay(): given 'bs' and the active (topmost) BDS of an image chain,
find the image that is the immediate top of 'bs'
bdrv_drop_intermediate():
Given 3 BDS (active, top, base), drop images above
base up to and including top, and set base to be the
backing file of top's overlay node.
E.g., this converts:
bottom <- base <- intermediate <- top <- active
to
bottom <- base <- active
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is based on Supriya Kannery's bdrv_reopen() patch series.
This provides a transactional method to reopen multiple
images files safely.
Image files are queue for reopen via bdrv_reopen_queue(), and the
reopen occurs when bdrv_reopen_multiple() is called. Changes are
staged in bdrv_reopen_prepare() and in the equivalent driver level
functions. If any of the staged images fails a prepare, then all
of the images left untouched, and the staged changes for each image
abandoned.
Block drivers are passed a reopen state structure, that contains:
* BDS to reopen
* flags for the reopen
* opaque pointer for any driver-specific data that needs to be
persistent from _prepare to _commit/_abort
* reopen queue pointer, if the driver needs to queue additional
BDS for a reopen
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag,
but without the flag recorded in bs->open_flags, then next time
a reopen() is performed the enable_write_cache setting may be
inadvertently lost.
This will set the flag in open_flags, so it is preserved across
reopens.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I believe the bs->keep_read_only flag is supposed to reflect
the initial open state of the device. If the device is initially
opened R/O, then commit operations, or reopen operations changing
to R/W, are prohibited.
Currently, the keep_read_only flag is only accurate for the active
layer, and its backing file. Subsequent images end up always having
the keep_read_only flag set.
For instance, what happens now:
[ base ] kro = 1, ro = 1
|
v
[ snap-1 ] kro = 1, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
What we want:
[ base ] kro = 0, ro = 1
|
v
[ snap-1 ] kro = 0, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller would not delete temporary file after failed get_tmp_filename().
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The tray status should change also if you eject empty block device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 29cdb251 already added a comment that no unnecessary flushes to
disk will occur, this patch makes the code even get to the point of the
comment. This is mostly theoretical because in practice we only stack
one format on top of one protocol, the former implementing flush_to_os
and the latter only flush_to_disk. It starts to matter when drivers that
are not on top implement flush_to_os.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c". Device-specific functionality
should be kept in device code, not the block layer. Move it back.
Disk geometry guessing is still in block.c. To be moved out in a
later patch series.
Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive. Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To prepare move of guess_disk_lchs() into hw/, where it poking
BlockDriverState member io_limits_enabled directly would be unclean.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint. Makes fd_revalidate() assign
random crap to drv->drive.
Has been broken that way for ages. Harmless, because:
* The only way to set a geometry hint is -drive if=none,cyls=...
Since commit c219331e, probably unintentional.
* The only use of drv->drive is as argument to another
bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the
geometry hint is still there.
Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e. Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new function can be made a bit nicer than bdrv_append. It swaps the
whole contents, and then swaps back (using the usual t=a;a=b;b=t idiom)
the fields that need to stay on top. Thus, it does not need explicit
bdrv_detach_dev, bdrv_iostatus_disable, etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While these should not be in use at the time a transaction is started,
a command in the prepare phase of a transaction might have added them,
so they need to be brought over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So callers don't need to know anything about maximum name length.
Returning a pointer is safe, because the name string lives as long as
the block driver it names, and block drivers don't die.
Requested by Peter Maydell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Formats are entirely in charge of flushes for metadata writes. For
guest-initiated writes, a writethrough cache is faked in the block layer.
So we can always open in writeback mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the guest will be able to flip enable_write_cache, the actual
state may not match what is used to open the new snapshot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to make the formats handle their own flushes
autonomously, while keeping for guests the ability to use a writethrough
cache. Since formats will write metadata via bs->file, bdrv_co_do_writev
is the only place where we need to add a flush.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.
get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.
This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-img info should use the same logic as qemu when printing the
backing file path, or debugging becomes quite tricky. We can also
simplify the output in case the backing file has an absolute path
or a protocol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_close should leave fields in the same state as bdrv_new. It is
not up to bdrv_open_common to fix the mess.
Also, backing_format was not being re-initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
path_has_protocol will erroneously return "true" if the colon is part
of a filename. These names are common with stable device names produced
by udev. We cannot fully protect against this in case the filename
does not have a path component (e.g. if the current directory is
/dev/disk/by-path), but in the common case there will be a slash before
and path_has_protocol can easily detect that and return false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Windows, all the logic is already in is_windows_drive and
is_windows_drive_prefix. On POSIX, there is no need to look
out for colons.
The win32 code changes the behaviour in some cases, we could have
something like "d:foo.img". The old code would treat it as relative
path, the new one as absolute. Now the path is absolute, because to
go from c:/program files/blah to d:foo.img you cannot say c:/program
files/blah/d:foo.img. You have to say d:foo.img. But you could also
say it's relative because (I think, at least it was like that in DOS
15 years ago) d:foo.img is relative to the current path of drive D.
Considering how path_is_absolute is used by path_combine, I think it's
better to treat it as absolute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limitation on not having I/O after cancellation cannot really be
kept. Even streaming has a very small race window where you could
cancel a job and have it report completion. If this window is hit,
bdrv_change_backing_file() will yield and possibly cause accesses to
dangling pointers etc.
So, let's just assume that we cannot know exactly what will happen
after the coroutine has set busy to false. We can set a very lax
condition:
- if we cancel the job, the coroutine won't set it to false again
(and hence will not call co_sleep_ns again).
- block_job_cancel_sync will wait for the coroutine to exit, which
pretty much ensures no race.
Instead, we track the coroutine that executes the job and put very
strict conditions on what to do while it is quiescent (busy = false).
First of all, the coroutine must never set busy = false while the job
has been cancelled. Second, the coroutine can be reentered arbitrarily
while it is quiescent, so you cannot really do anything but co_sleep_ns at
that time. This condition is obeyed by the block_job_sleep_ns function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function abstracts the pretty complex semantics of the "busy"
member of BlockJob.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are reusing bs->file across close/open, which may not cause any
known bugs but is a recipe for trouble. Prefer bdrv_delete, and
enjoy the new invariant in the implementation of bdrv_delete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
