This uses system calls directly for Unix file descriptors, so that the
efficient writev_buffer can be used. Pay attention to the possibility
of partial writes in writev.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is enough to implement one of socket_writev_buffer and
socket_put_buffer.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/block:
rbd: add an asynchronous flush
iotests: Add 'check -ssh' option to test Secure Shell block device.
block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk.
block: Add support for Secure Shell (ssh) block device.
ide: refuse WIN_READ_NATIVE_MAX on empty device
qemu-iotests: filter QEMU_PROG in 051.out
qemu-iotests: Add test for -drive options
qemu-iotests: A few more bdrv_pread/pwrite tests
block: Introduce bdrv_pwritev() for qcow2_save_vmstate
savevm: Implement block_writev_buffer()
block: Introduce bdrv_writev_vmstate
Conflicts:
savevm.c
aliguori: add f->pos parameter to writev_buffer().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of breaking up RAM state into many small chunks, pass the iovec
to the block layer for better performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check f->iovcnt in add_to_iovec, f->buf_index in qemu_put_buffer/byte.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The same QEMUFile is never used for both read and write. Simplify
the logic to simply look for presence or absence of the right ops.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The recent patches to use vectored I/O for RAM migration caused a
regression in savevm speed. To restore previous performance,
add data to the buffer in qemu_put_buffer_async whenever writev_buffer
is not available in the QEMUFile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This allows us to add a buffer to the iovec to send without copying it
into the static buffer, the buffer will be sent later when qemu_fflush is called.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Update qemu_fflush and stdio_close to use writev ops if they are available
Use the buffers stored in the iovec.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
All data is still copied into the static buffer.
Adjacent iovecs are coalesced so we send one big buffer
instead of many small buffers.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current savevm code includes VMSTATE helpers for a number of commonly
used data types, but not for the float64 type used by the internal floating
point emulation code. This patch fixes the deficiency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The savevm code already includes a number of *_EQUAL helpers which act as
sanity checks verifying that the configuration of the saved state matches
that of the machine we're loading into to work. Variants already exist
for 8 bit 16 bit and 32 bit integers, but not 64 bit integers. This patch
fills that hole, adding a UINT64 version.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This avoids adding a duplicate stub for CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rate limiting is now simply a byte counter; client call
qemu_file_rate_limit() manually to determine if they have to exit.
So it is possible and simple to move the functionality to QEMUFile.
This makes the remaining functionality of s->file redundant;
in the next patch we can remove it and write directly to s->migration_file.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As a start, use QEMUFile to store the destination and close it.
qemu_get_fd gets a file descriptor that will be used by the write
callbacks.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Force a flush when qemu_ftell is called. This simplifies the buffer magic
(it also breaks qemu_ftell for input QEMUFiles, but we never use it).
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is what exec_close does. Move this to the underlying QEMUFile.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is what fd_close does. Prepare for switching to a QEMUFile.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There is no reason for outgoing exec migration to do popen manually
anymore (the reason used to be that we needed the FILE* to make it
non-blocking). Use qemu_popen_cmd.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Buffering was needed because blocking writes could take a long time
and starve other threads seeking to grab the big QEMU mutex.
Now that all writes (except within _complete callbacks) are done
outside the big QEMU mutex, we do not need buffering at all.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Only the migration_bitmap_sync() call needs the iothread lock.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now, migration cannot entirely rely on QEMUFile's automatic
drop of I/O after an error, because it does its "real" I/O outside
the put_buffer callback. To fix this until buffering is gone, expose
qemu_file_set_error which we will use in buffered_flush.
Similarly, buffered_flush is not a complete flush because some data may
still reside in the QEMUFile's own buffer. This somewhat complicates the
process of closing the migration thread. Again, when buffering is gone
buffered_flush will disappear and calling qemu_fflush will not be needed;
in the meanwhile, we expose the function for use in migration.c.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is done by almost all callers of qemu_fflush, move the code
directly to qemu_fflush.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is useful, because it lets us keep the cancellation callbacks
inside the big lock while pushing the others out.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration .save_live_iterate() functions return the number of bytes
transferred. The easiest way of doing this is by calling qemu_ftell(f)
at the beginning and end of the function to calculate the difference.
Make qemu_ftell() public so that block-migration will be able to use it.
Also adjust the ftell calculation for writable files where buf_offset
does not include buf_size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1360661835-28663-2-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The incoming migration is processed in a coroutine and uses an fd read
handler to enter the yielded coroutine when data becomes available.
The read handler was set too broadly, so that spurious coroutine entries
were be triggered if other coroutine users yielded (like the block
layer's bdrv_write() function).
Install the fd read only only when yielding for more data to become
available. This prevents spurious coroutine entries which break code
that assumes only a specific set of places can re-enter the coroutine.
This patch fixes crashes in block/raw-posix.c that are triggered with
"migrate -b" when qiov becomes a dangling pointer due to a spurious
coroutine entry that frees qiov early.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360598505-5512-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Juan Quintela (7) and Paolo Bonzini (6)
# Via Juan Quintela
* quintela/thread.next:
migration: remove argument to qemu_savevm_state_cancel
migration: Only go to the iterate stage if there is anything to send
migration: unfold rest of migrate_fd_put_ready() into thread
migration: move exit condition to migration thread
migration: Add buffered_flush error handling
migration: move beginning stage to the migration thread
qemu-file: Only set last_error if it is not already set
migration: fix off-by-one in buffered_rate_limit
migration: remove double call to migrate_fd_close
migration: make function static
use XFER_LIMIT_RATIO consistently
Protect migration_bitmap_sync() with the ramlist lock
Unlock ramlist lock also in error case
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QEMU provides a portable function qemu_gettimeofday instead of
gettimeofday and also an implementation of localtime_r for MinGW.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
savevm.c suffers from the same problem as some other files.
Some years ago savevm.c was created from vl.c, moving some
code from there into a separate file. At that time, all
includes were just copied from vl.c to savevm.c, without
checking which ones are needed and which are not.
But actually most of that stuff is _not_ needed. More, some
stuff is wrong, for example, *BSD #ifdef'ery around <util.h>
vs <libutil.h> - for one, it fails to build on Debian/kFreebsd.
Just remove all this. Maybe there's a possibility to clean
it up further - like removing <windows.h> (and maybe including
winsock.h for htons etc), and maybe it's possible to remove
some internal #includes too, but I didn't check this.
While at it, remove duplicate #include of qemu/timer.h.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Code just now does (simplified for clarity)
if (qemu_savevm_state_iterate(s->file) == 1) {
vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
qemu_savevm_state_complete(s->file);
}
Problem here is that qemu_savevm_state_iterate() returns 1 when it
knows that remaining memory to sent takes less than max downtime.
But this means that we could end spending 2x max_downtime, one
downtime in qemu_savevm_iterate, and the other in
qemu_savevm_state_complete.
Changed code to:
pending_size = qemu_savevm_state_pending(s->file, max_size);
DPRINTF("pending size %lu max %lu\n", pending_size, max_size);
if (pending_size >= max_size) {
ret = qemu_savevm_state_iterate(s->file);
} else {
vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
qemu_savevm_state_complete(s->file);
}
So what we do is: at current network speed, we calculate the maximum
number of bytes we can sent: max_size.
Then we ask every save_live section how much they have pending. If
they are less than max_size, we move to complete phase, otherwise we
do an iterate one.
This makes things much simpler, because now individual sections don't
have to caluclate the bandwidth (it was implossible to do right from
there).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Move all the writes to the migration_thread, and make writings
blocking. Notice that are still using the iothread for everything
that we do.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will never happen right now (the assertion would fail). The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.
Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix now is process_incoming_migration+qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that qemu_fseek does not exist anymore, there is no reason to do
an fseek before fread/fwrite when operating on an stdio file.
Thus, unify the get/put_buffer callbacks used by qemu_fopen
with those used for pipes.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for saving/loading bitmap.h bitmaps in vmstate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Move the error check to the beggining of the callers. Once this is fixed
qemu_file_set_if_error() is not used anymore, so remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It was setting last_error directly once, and with the helper the other time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It was used only one, and was only one if. It makes error handling
saner.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust all the callers. We moved the set of last_error from inside
qemu_fflush() to all the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* agraf/ppc-for-upstream: (24 commits)
openpic: Added BRR1 register
pseries: Update SLOF firmware image
pseries dma: DMA window params added to PHB and DT population changed
pseries: Add PCI MSI/MSI-X support
pseries: Add trace event for PCI irqs
pseries: Export find_phb() utility function for PCI code
pseries: added allocator for a block of IRQs
pseries: Separate PCI RTAS setup from common from emulation specific PCI setup
pseries: Rework irq assignment to avoid carrying qemu_irqs around
pseries: Remove extraneous prints
pseries: Update SLOF
PPC: spapr: Remove global variable
PPC: spapr: Rework VGA select logic
xbzrle: fix compilation on ppc32
spapr: Add support for -vga option
Add one new file vga-pci.h and cleanup on all platforms
Revert "PPC: e500: Use new MPIC dt format"
ppc: Fix bug in handling of PAPR hypercall exits
PPC: e500: add generic e500 platform
PPC: e500: split mpc8544ds machine from generic e500 code
...
When compiling the xbzrle code on my ppc32 user space, I hit the following
gcc compiler warning (treated as an error):
cc1: warnings being treated as errors
savevm.c: In function ‘xbzrle_encode_buffer’:
savevm.c:2476: error: overflow in implicit constant conversion
Fix this by making the cast explicit, rather than implicit.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch converts all block layer close calls, that correspond
to qemu_open calls, to qemu_close.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For performance we are encoding long word at a time.
For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp():
using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test
to find out if any byte in the long word is zero.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We split it into 2 functions, foo_live_iterate, and foo_live_complete.
At this point, we only remove the bits that are for the other stage,
functionally this is equivalent to previous code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch splits stage 1 to its own function for both save_live
users, ram and block. It is just a copy of the function, removing the
parts of the other stages. Optimizations would came later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Enable the creation of a method to tell migration if that section is
active and should be migrate. We use it for blk-migration, that is
normally not active. We don't create the method for RAM, as setups
without RAM are very strange O:-)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Notice that the live migration users never unregister, so no problem
about freeing the ops structure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
This allows to know how long each section takes to save.
An awk script like this tells us sections that takes more that 10ms
$1 ~ /savevm_state_iterate_end/ {
/* Print savevm_section_end line when > 10ms duration */
if ($2 > 10000) {
printf("%s times_missing=%u\n", $0, times_missing++);
}
}
Signed-off-by: Juan Quintela <quintela@redhat.com>
fix ws tracepoints
Signed-off-by: Juan Quintela <quintela@redhat.com>
* afaerber-or/qom-next-2: (22 commits)
qom: Push error reporting to object_property_find()
qdev: Remove qdev_prop_exists()
qbus: Initialize in standard way
qbus: Make child devices links
qdev: Connect busses with their parent devices
qdev: Convert busses to QEMU Object Model
qdev: Move SysBus initialization to sysbus.c
qdev: Use wrapper for qdev_get_path
qdev: Remove qdev_prop_set_defaults
qdev: Clean up global properties
qdev: Move bus properties to abstract superclasses
qdev: Move bus properties to a separate global
qdev: Push "type" property up to Object
arm_l2x0: Rename "type" property to "cache-type"
m48t59: Rename "type" property to "model"
qom: Assert that public types have a non-NULL parent field
qom: Drop type_register_static_alias() macro
qom: Make Object a type
qom: Add class_base_init
qom: Add object_child_foreach()
...
This makes it easier to remove it from BusInfo.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Writing vm state uses bdrv_pwrite, so it will automatically get flushes
in writethrough mode. But doing a flush at the end in writeback mode
is probably a good idea anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tb.time is a time value, but not necessarily of the same size as time_t:
while time_t is 64 bit for w64, tb.time still is 32 bit only.
Therefore we need en explicit conversion.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- add an "is_ram" flag to SaveStateEntry;
- register_savevm_live sets is_ram for live_savevm devices;
- introduce a "xen-save-devices-state" QAPI command that can be used to save
the state of all devices, but not the RAM or the block devices of the
VM.
Changes in v8:
- rename save-devices-state to xen-save-devices-state.
Changes in v7:
- rename save_devices to save-devices-state.
Changes in v6:
- remove the is_ram parameter from register_savevm_live and sets is_ram
if the device is a live_savevm device;
- introduce save_devices as a QAPI command, write a better description
for it;
- fix CODING_STYLE;
- introduce a new doc to explain the save format used by save_devices.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
* qemu-kvm/memory/urgent: (42 commits)
memory: check for watchpoints when getting code ram_addr
exec: fix write tlb entry misused as iotlb
Sparc: avoid AREG0 wrappers for memory access helpers
Sparc: avoid AREG0 for memory access helpers
TCG: add 5 arg helpers to def-helper.h
softmmu templates: optionally pass CPUState to memory access functions
i386: Remove REGPARM
sparc64: implement PCI and ISA irqs
sparc: reset CPU state on reset
apb: use normal PCI device header for PBM device
w64: Fix data type of next_tb and tcg_qemu_tb_exec
softfloat: fix for C99
vmstate: fix varrays with uint32_t indexes
Fix large memory chunks allocation with tcg_malloc.
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
malta: Fix display for LED array
malta: Use symbolic hardware addresses
...
VMSTATE_VARRAY_UINT32() is used in hw/ds1225y.c, and we checked
VMS_VARRAY_UINT32 bit of field->flags in vmstate_load_state(),
but we don't check this bit in vmstate_save_state().
Signed-off-by: Amos Kong <akong@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.
The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.
Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.
To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.
All these changes should be transparent to the user.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Monitor object is passed back and forth within the migration/savevm
code so that it can print errors and progress to the user.
However, that approach assumes a HMP monitor, being completely invalid
in QMP.
This commit drops almost every single usage of the Monitor object, all
monitor_printf() calls have been converted into DPRINTF() ones.
There are a few remaining Monitor objects, those are going to be dropped
by the next commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
rom/device regions have a ram_addr that is composed of both an I/O handler
(low bits) and RAM region (high bits); but qemu_ram_set_idstr() expects just
a RAM region. Mask the I/O handler to make it happy.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.
Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: Avi Kivity <avi@redhat.com>
This is what qemu_fclose() expects.
Changes v1 -> v2:
- Add braces to if statement to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is what qemu_fclose() expects.
Changes v1 -> v2:
- On success, keep returning pclose() return value, instead of always 0.
Changes v2 -> v3:
- Add braces on if statements to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will make sure no error will be missed as long as callers always
check for qemu_fclose() return value. For reference, this is the
complete list of qemu_fclose() callers:
- exec_close(): already fixed to check for negative values, not -1
- migrate_fd_cleanup(): already fixed to consider only negative values
as error, not any non-zero value
- exec_accept_incoming_migration(): no return value check (yet)
- fd_accept_incoming_migration(): no return value check (yet)
- tcp_accept_incoming_migration(): no return value check (yet)
- unix_accept_incoming_migration(): no return value check (yet)
- do_savevm(): no return value check (yet)
- load_vmstate(): no return value check (yet)
Changes v1 -> v2:
- Add small comment about the need to return previously-spotted errors
Changes v2 -> v3:
- Add braces to "if" statements to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some code uses qemu_file_set_error() already, so use it everywhere
when setting last_error, for consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
