Add three new vhost-user protocol
`VHOST_USER_BACKEND_SHARED_OBJECT_* messages`.
These new messages are sent from vhost-user
back-ends to interact with the virtio-dmabuf
table in order to add or remove themselves as
virtio exporters, or lookup for virtio dma-buf
shared objects.
The action taken in the front-end depends
on the type stored in the virtio shared
object hash table.
When the table holds a pointer to a vhost
backend for a given UUID, the front-end sends
a VHOST_USER_GET_SHARED_OBJECT to the
backend holding the shared object.
The messages can only be sent after successfully
negotiating a new VHOST_USER_PROTOCOL_F_SHARED_OBJECT
vhost-user protocol feature bit.
Finally, refactor code to send response message so
that all common parts both for the common REPLY_ACK
case, and other data responses, can call it and
avoid code repetition.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-4-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'next' was converted from a local variable to an output parameter
in commit:
412e0e81b1 ("virtio: handle virtqueue_read_next_desc() errors")
But all the actual uses of the 'i/next' as an output were removed a few
months prior in commit:
aa570d6fb6 ("virtio: combine the read of a descriptor")
Remove the unused argument to simplify the code.
Also, adding a comment to the function to describe what it is actually
doing, as it is not obvious that the 'desc' is both an input and an
output argument.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927140016.2317404-3-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was supposed to be a compiler barrier and it was a compiler barrier
initially called 'wmb' when virtio core support was introduced.
Later all the instances of 'wmb' were switched to smp_wmb to fix memory
ordering issues on non-x86 platforms. However, this one doesn't need
to be an actual barrier, as its only purpose was to ensure that the
value is not read twice.
And since commit aa570d6fb6 ("virtio: combine the read of a descriptor")
there is no need for a barrier at all, since we're no longer reading
guest memory here, but accessing a local structure.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927140016.2317404-2-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We do not need the most up to date number of heads, we only want to
know if there is at least one.
Use shadow variable as long as it is not equal to the last available
index checked. This avoids expensive qatomic dereference of the
RCU-protected memory region cache as well as the memory access itself.
The change improves performance of the af-xdp network backend by 2-3%.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927135157.2316982-1-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new vhost-user protocol feature to vhost-user protocol feature map
and enumeration:
- VHOST_USER_PROTOCOL_F_STATUS
Add new virtio device features for several virtio devices to their
respective feature mappings:
virtio-blk:
- VIRTIO_BLK_F_SECURE_ERASE
virtio-net:
- VIRTIO_NET_F_NOTF_COAL
- VIRTIO_NET_F_GUEST_USO4
- VIRTIO_NET_F_GUEST_USO6
- VIRTIO_NET_F_HOST_USO
virtio/vhost-user-gpio:
- VIRTIO_GPIO_F_IRQ
- VHOST_USER_F_PROTOCOL_FEATURES
Add support for introspection on vhost-user-gpio devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-3-jonah.palmer@oracle.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_list duplicates information about virtio devices that already
exist in the QOM composition tree. Instead of creating this list of
realized virtio devices, search the QOM composition tree instead.
This patch modifies the QMP command qmp_x_query_virtio to instead
recursively search the QOM composition tree for devices of type
'TYPE_VIRTIO_DEVICE'. The device is also checked to ensure it's
realized.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230926224107.2951144-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches in this series will no longer perform an
immediate poll and check of the device's used buffers
for each CVQ state load command. Instead, they will
send CVQ state load commands in parallel by polling
multiple pending buffers at once.
To achieve this, this patch refactoring vhost_svq_poll()
to accept a new argument `num`, which allows vhost_svq_poll()
to wait for the device to use multiple elements,
rather than polling for a single element.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <950b3bfcfc5d446168b9d6a249d554a013a691d4.1693287885.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Doing that way allows CVQ to be enabled before the dataplane vqs,
restoring the state as MQ or MAC addresses properly in the case of a
migration.
The patch does it by defining a ->load NetClientInfo callback also for
dataplane. Ideally, this should be done by an independent patch, but
the function is already static so it would only add an empty
vhost_vdpa_net_data_load stub.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230822085330.3978829-5-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-vdpa net backend needs to enable vrings in a different order
than default, so export it.
No functional change intended except for tracing, that now includes the
(virtio) index being enabled and the return value of the ioctl.
Still ignoring return value of this function if called from
vhost_vdpa_dev_start, as reorganize calling code around it is out of
the scope of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lots of virtio functions that are on a hot path in data transmission
are initializing indirect descriptor cache at the point of stack
allocation. It's a 112 byte structure that is getting zeroed out on
each call adding unnecessary overhead. It's going to be correctly
initialized later via special init function. The only reason to
actually initialize right away is the ability to safely destruct it.
Replacing a designated initializer with a function to only initialize
what is necessary.
Removal of the unnecessary stack initializations improves throughput
of virtio-net devices in terms of 64B packets per second by 6-14 %
depending on the case. Tested with a proposed af-xdp network backend
and a dpdk testpmd application in the guest, but should be beneficial
for other virtio devices as well.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230811143423.3258788-1-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To use the generic device the user will need to provide the config
region size via the command line. We also add a notifier so the guest
can be pinged if the remote daemon updates the config.
With these changes:
-device vhost-user-device-pci,virtio-id=41,num_vqs=2,config_size=8
is equivalent to:
-device vhost-user-gpio-pci
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory we shouldn't need to repeat so much boilerplate to support
vhost-user backends. This provides a generic vhost-user-base QOM
object and a derived vhost-user-device for which the user needs to
provide the few bits of information that aren't currently provided by
the vhost-user protocol. This should provide a baseline implementation
from which the other vhost-user stub can specialise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit de6cd7599b ("meson: Replace softmmu_ss
-> system_ss"), rename the virtio source set common to all
system emulation as 'system_virtio_ss[]'. This is clearer
because softmmu can be used for user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710100510.84862-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous commit removed the dependencies on the
target-specific TARGET_PAGE_FOO macros. We can now
move vhost-vdpa.c to the 'softmmu_virtio_ss' source
set to build it once for all our targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710100432.84819-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit e414ed2c47 ("virtio-iommu: Use
target-agnostic qemu_target_page_mask"), Replace the
target-specific TARGET_PAGE_SIZE and TARGET_PAGE_MASK
definitions by a call to the runtime qemu_target_page_size()
helper which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230710094931.84402-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use TARGET_PAGE_SIZE to calculate TARGET_PAGE_ALIGN
(see the rationale in previous commits).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Propagate TARGET_PAGE_MASK (see the previous commit for
rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to make vhost-vdpa.c a target-agnostic source unit,
we need to remove the TARGET_PAGE_SIZE / TARGET_PAGE_MASK /
TARGET_PAGE_ALIGN uses. TARGET_PAGE_SIZE will be replaced by
the runtime qemu_target_page_size(). The other ones will be
deduced from TARGET_PAGE_SIZE.
Since the 3 macros are used in 3 related functions (sharing
the same call tree), we'll refactor them to only depend on
TARGET_PAGE_MASK.
Having the following call tree:
vhost_vdpa_listener_region_del()
-> vhost_vdpa_listener_skipped_section()
-> vhost_vdpa_section_end()
The first step is to propagate TARGET_PAGE_MASK to
vhost_vdpa_listener_skipped_section().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_load() as a whole should run in coroutine context because it
reads from the migration stream and we don't want this to block.
However, it calls virtio_set_features_nocheck() and devices don't
expect their .set_features callback to run in a coroutine and therefore
call functions that may not be called in coroutine context. To fix this,
drop out of coroutine context for calling virtio_set_features_nocheck().
Without this fix, the following crash was reported:
#0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
#1 0x00007efc738c05d3 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78
#2 0x00007efc73873d26 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
#3 0x00007efc738477f3 in __GI_abort () at abort.c:79
#4 0x00007efc7384771b in __assert_fail_base (fmt=0x7efc739dbcb8 "", assertion=assertion@entry=0x560aebfbf5cf "!qemu_in_coroutine()",
file=file@entry=0x560aebfcd2d4 "../block/graph-lock.c", line=line@entry=275, function=function@entry=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:92
#5 0x00007efc7386ccc6 in __assert_fail (assertion=0x560aebfbf5cf "!qemu_in_coroutine()", file=0x560aebfcd2d4 "../block/graph-lock.c", line=275,
function=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:101
#6 0x0000560aebcd8dd6 in bdrv_register_buf ()
#7 0x0000560aeb97ed97 in ram_block_added.llvm ()
#8 0x0000560aebb8303f in ram_block_add.llvm ()
#9 0x0000560aebb834fa in qemu_ram_alloc_internal.llvm ()
#10 0x0000560aebb2ac98 in vfio_region_mmap ()
#11 0x0000560aebb3ea0f in vfio_bars_register ()
#12 0x0000560aebb3c628 in vfio_realize ()
#13 0x0000560aeb90f0c2 in pci_qdev_realize ()
#14 0x0000560aebc40305 in device_set_realized ()
#15 0x0000560aebc48e07 in property_set_bool.llvm ()
#16 0x0000560aebc46582 in object_property_set ()
#17 0x0000560aebc4cd58 in object_property_set_qobject ()
#18 0x0000560aebc46ba7 in object_property_set_bool ()
#19 0x0000560aeb98b3ca in qdev_device_add_from_qdict ()
#20 0x0000560aebb1fbaf in virtio_net_set_features ()
#21 0x0000560aebb46b51 in virtio_set_features_nocheck ()
#22 0x0000560aebb47107 in virtio_load ()
#23 0x0000560aeb9ae7ce in vmstate_load_state ()
#24 0x0000560aeb9d2ee9 in qemu_loadvm_state_main ()
#25 0x0000560aeb9d45e1 in qemu_loadvm_state ()
#26 0x0000560aeb9bc32c in process_incoming_migration_co.llvm ()
#27 0x0000560aebeace56 in coroutine_trampoline.llvm ()
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-832
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905145002.46391-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For symmetric algorithms, the length of ciphertext must be as same
as the plaintext.
The missing verification of the src_len and the dst_len in
virtio_crypto_sym_op_helper() may lead buffer overflow/divulged.
This patch is originally written by Yiming Tao for QEMU-SECURITY,
resend it(a few changes of error message) in qemu-devel.
Fixes: CVE-2023-3180
Fixes: 04b9b37edda("virtio-crypto: add data queue processing handler")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: Yiming Tao <taoym@zju.edu.cn>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230803024314.29962-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost-user reconnect to the backend, the notifer should be
cleanup. Otherwise, the fd resource will be exhausted.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20230731121018.2856310-2-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
virtio_queue_packed_set_last_avail_idx() is used by vhost devices to set
the internal queue indices to what has been reported by the vhost
back-end through GET_VRING_BASE. For packed virtqueues, this
32-bit value is expected to contain both the device's internal avail and
used indices, as well as their respective wrap counters.
To get the used index, we shift the 32-bit value right by 16, and then
apply a mask of 0x7ffff. That seems to be a typo, because it should be
0x7fff; first of all, the virtio specification says that the maximum
queue size for packed virt queues is 2^15, so the indices cannot exceed
2^15 - 1 anyway, making 0x7fff the correct mask. Second, the mask
clearly is wrong from context, too, given that (A) `idx & 0x70000` must
be 0 at this point (`idx` is 32 bit and was shifted to the right by 16
already), (B) `idx & 0x8000` is the used_wrap_counter, so should not be
part of the used index, and (C) `vq->used_idx` is a `uint16_t`, so
cannot fit the 0x70000 part of the mask anyway.
This most likely never produced any guest-visible bugs, though, because
for a vhost device, qemu will probably not evaluate the used index
outside of virtio_queue_packed_get_last_avail_idx(), where we
reconstruct the 32-bit value from avail and used indices and their wrap
counters again. There, it does not matter whether the highest bit of
the used_idx is the used index wrap counter, because we put the wrap
counter exactly in that position anyway.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230721134945.26967-1-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230721072820.75797-1-david.edmondson@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_disconnect
...
qemu_chr_write_buffer
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_set_status
...
qemu_cleanup
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e1 ("hw/virtio: Add boilerplate for vhost-user-scmi device")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
At several locations we compute the granule from the config
page_size_mask using ctz() and then format it in traces using
BIT(). As the page_size_mask is 64b we should use ctz64 and
BIT_ULL() for formatting. We failed to be consistent.
Note the page_size_mask is garanteed to be non null. The spec
mandates the device to set at least one bit, so ctz64 cannot
return 64. This is garanteed by the fact the device
initializes the page_size_mask to qemu_target_page_mask()
and then the page_size_mask is further constrained by
virtio_iommu_set_page_size_mask() callback which can't
result in a new mask being null. So if Coverity complains
round those ctz64/BIT_ULL with CID 1517772 this is a false
positive
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device assignment")
Message-Id: <20230718182136.40096-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
In the virtio_iommu_handle_command() when a PROBE request is handled,
output_size takes a value greater than the tail size and on a subsequent
iteration we can get a stack out-of-band access. Initialize the
output_size on each iteration.
The issue was found with ASAN. Credits to:
Yiming Tao(Zhejiang University)
Gaoning Pan(Zhejiang University)
Fixes: 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230717162126.11693-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's support device unplug by forwarding the unplug_request_check()
callback to the virtio-mem device.
Further, disallow changing the requested-size once an unplug request is
pending.
Disallowing requested-size changes handles corner cases such as
(1) pausing the VM (2) requesting device unplug and (3) adjusting the
requested size. If the VM would plug memory (due to the requested size
change) before processing the unplug request, we would be in trouble.
Message-ID: <20230711153445.514112-8-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
In many cases, blindly unplugging a virtio-mem device is problematic. We
can only safely remove a device once:
* The guest is not expecting to be able to read unplugged memory
(unplugged-inaccessible == on)
* The virtio-mem device does not have memory plugged (size == 0)
* The virtio-mem device does not have outstanding requests to the VM to
plug memory (requested-size == 0)
So let's add a callback to the virtio-mem device class to check for that.
We'll wire-up virtio-mem-pci next.
Message-ID: <20230711153445.514112-7-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's support unplug requests for virtio-md-pci devices that provide
a unplug_request_check() callback.
We'll wire that up for virtio-mem-pci next.
Message-ID: <20230711153445.514112-6-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
While we fence unplug requests from the outside, the VM can still
trigger unplug of virtio based memory devices, for example, in Linux
doing on a virtio-mem-pci device:
# echo 0 > /sys/bus/pci/slots/3/power
While doing that is not really expected to work without harming the
guest OS (e.g., removing a virtio-mem device while it still provides
memory), let's make sure that we properly handle it on the QEMU side.
We'll add support for unplugging of virtio-mem devices in some
configurations next.
Message-ID: <20230711153445.514112-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's factor out (un)plug handling, to be reused from arm/virt code.
Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because
neither virtio-mem nor virtio-pmem is enabled. While this cannot
currently happen for x86, it will be possible for arm/virt.
Message-ID: <20230711153445.514112-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add a new abstract "virtio memory device" type, and use it as
parent class of virtio-mem-pci and virtio-pmem-pci.
Message-ID: <20230711153445.514112-2-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
To achieve desired "x-ignore-shared" functionality, we should not
discard all RAM when realizing the device and not mess with
preallocation/postcopy when loading device state. In essence, we should
not touch RAM content.
As "x-ignore-shared" gets set after realizing the device, we cannot
rely on that. Let's simply skip discarding of RAM on incoming migration.
Note that virtio_mem_post_load() will call
virtio_mem_restore_unplugged() -- unless "x-ignore-shared" is set. So
once migration finished we'll have a consistent state.
The initial system reset will also not discard any RAM, because
virtio_mem_unplug_all() will not call virtio_mem_unplug_all() when no
memory is plugged (which is the case before loading the device state).
Note that something like VM templating -- see commit b17fbbe55c
("migration: allow private destination ram with x-ignore-shared") -- is
currently incompatible with virtio-mem and ram_block_discard_range() will
warn in case a private file mapping is supplied by virtio-mem.
For VM templating with virtio-mem, it makes more sense to either
(a) Create the template without the virtio-mem device and hotplug a
virtio-mem device to the new VM instances using proper own memory
backend.
(b) Use a virtio-mem device that doesn't provide any memory in the
template (requested-size=0) and use private anonymous memory.
Message-ID: <20230706075612.67404-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Already when starting QEMU we perform one system reset that ends up
triggering virtio_mem_unplug_all() with no actual memory plugged yet.
That, in turn will trigger ram_block_discard_range() and perform some
other actions that are not required in that case.
Let's optimize virtio_mem_unplug_all() for the case that no memory is
plugged. This will be beneficial for x-ignore-shared support as well.
Message-ID: <20230706075612.67404-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
QEMU uses vhost_svq_translate_addr() to translate addresses
between the QEMU's virtual address and the SVQ IOVA. In order
to validate this translation, QEMU checks whether the translated
range falls within the mapped range.
Yet the problem is that, the value of `needle_last`, which is calculated
by `needle.translated_addr + iovec[i].iov_len`, should represent the
exclusive boundary of the translated range, rather than the last
inclusive addresses of the range. Consequently, QEMU fails the check
when the translated range matches the size of the mapped range.
This patch solves this problem by fixing the `needle_last` value to
the last inclusive address of the translated range.
Note that this bug cannot be triggered at the moment, because QEMU
is unable to translate such a big range due to the truncation of
the CVQ command in vhost_vdpa_net_handle_ctrl_avail().
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ee31c5420ffc8e6a29705ddd30badb814ddbae1d.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current error messages in virtio_iommu_set_page_size_mask()
sound quite similar for different situations and miss the IOMMU
memory region that causes the issue.
Clarify them and rework the comment.
Also remove the trace when the new page_size_mask is not applied as
the current frozen granule is kept. This message is rather confusing
for the end user and anyway the current granule would have been used
by the driver.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20230705165118.28194-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
When running on a 64kB page size host and protecting a VFIO device
with the virtio-iommu, qemu crashes with this kind of message:
qemu-kvm: virtio-iommu page mask 0xfffffffffffff000 is incompatible
with mask 0x20010000
qemu: hardware error: vfio: DMA mapping failed, unable to continue
This is due to the fact the IOMMU MR corresponding to the VFIO device
is enabled very late on domain attach, after the machine init.
The device reports a minimal 64kB page size but it is too late to be
applied. virtio_iommu_set_page_size_mask() fails and this causes
vfio_listener_region_add() to end up with hw_error();
To work around this issue, we transiently enable the IOMMU MR on
machine init to collect the page size requirements and then restore
the bypass state.
Fixes: 90519b9053 ("virtio-iommu: Add bypass mode support to assigned device")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230705165118.28194-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
With TPM CRM device, vhost-vdpa reports an error when it tries
to register a listener for a non aligned memory region:
qemu-system-x86_64: vhost_vdpa_listener_region_add received unaligned region
qemu-system-x86_64: vhost_vdpa_listener_region_del received unaligned region
This error can be confusing for the user whereas we only need to skip
the region (as it's already done after the error_report())
Rather than introducing a special case for TPM CRB memory section
to not display the message in this case, simply replace the
error_report() by a trace function (with more information, like the
memory region name).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230704071931.575888-2-lvivier@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device reset is issued per device, not per VQ. The legacy device reset
message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore,
this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device
messages.
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like
virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a
concept of one-time messages which is misleading. One-time messages are sent
once per operation on the device, not once for the lifetime of the device.
Therefore, as discussed in [1], vhost_user_one_time_request should be
renamed to vhost_user_per_device_request and the relevant comments updated
to match the real functionality.
[1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus.
It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates
of similar devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-3-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-scmi device which connects to
the remote daemon. It is based on code of similar vhost-user devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-2-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest can disable or never enable Device-TLB. In these cases,
it can't be used even if enabled in QEMU. So, check Device-TLB state
before registering IOMMU notifier and select unmap flag depending on
that. Also, implement a way to change IOMMU notifier flag if Device-TLB
state is changed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001312
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626091258.24453-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always 0 and it is not useful to route call through file
descriptor.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153736.472443-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add MEMORY_LISTENER_PRIORITY_DEV_BACKEND for the symbolic value
for memory listener to replace the hard-coded value 10 for the
device backend.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <8314d91688030d7004e96958f12e2c83fb889245.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true)
fails, we call vhost_dev_disable_notifiers() that executes
virtio_bus_set_host_notifier(false) on all queues, even on queues that
have failed to be initialized.
This triggers a core dump in memory_region_del_eventfd():
virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24)
vhost VQ 1 notifier binding failed: 24
.../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed.
Fix the problem by providing to vhost_dev_disable_notifiers() the
number of queues to disable.
Fixes: 8771589b6f ("vhost: simplify vhost_dev_enable_notifiers")
Cc: longpeng2@huawei.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230602162735.3670785-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
