The AVX2 optimization test assumes that the object format
is ELF and the system has the readelf utility. If this isn't
true then configure might fail or emit a warning (since in
a pipe "foo | bar >/dev/null 2>&1" does not redirect the
stderr of foo, only of bar). Adjust the check so that if
we don't have readelf or don't have an ELF object then we
just don't enable the AVX2 optimization.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-3-git-send-email-pmaydell@chiark.greenend.org.uk
The probe we do to determine what flags to use to make the usermode
executables use a non-default text address has some flaws:
* we run it even if we're not building the user binaries
* we don't expect "ld --verbose" to fail
The combination of these two results in a harmless but
ugly "ld: unknown option: --verbose" message when running
configure on OSX.
Improve the probe to only run when we need it and to fail
nicely when even the backstop 'ld --verbose' approach fails.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-2-git-send-email-pmaydell@chiark.greenend.org.uk
Support for ppc/ppc64 is official in libseccomp 2.3.0, so modify the
configuration script to allow qemuu to enable seccomp for those platforms.
Signed-off-by: Michael Strosaker <strosake@linux.vnet.ibm.com>
The CONFIG_SIGEV_THREAD_ID switch is unused since the related code
has been removed by commit 6d32717155
("aio / timers: Remove alarm timers"), so it can safely be removed
nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465571084-19885-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the avx2 primitives during the test, thus making sure that the
compiler and assembler could actually use avx2.
This also detects the failure case on gcc 4.8.x with -save-temps
and avoids the need for the gcc version check in cutils.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When configured with --extra-cflags=-O2 gcc optimised out the test
and the readelf failed the check leaving avx2 disabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MinGW seems to compile currently without warnings, so it should
be safe to enable -Werror now for this environment, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465373606-18486-1-git-send-email-thuth@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_ZERO_MALLOC was only used in qemu-malloc.c and
this file has been removed with the following commit:
41a748265f
Remove qemu_malloc/qemu_free
So we don't need this configuration setting anymore.
This patch also removes the z_version variable, since
this is now also not needed anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <1465398683-3152-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.
Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On my Debian jessie system, including nettle/pbkdf2.h does not cause
NULL to be defined, which causes the test to fail to compile. Include
stddef.h to bring in a definition of NULL.
Cc: qemu-trivial@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes these warnings from shellcheck:
^-- SC2006: Use $(..) instead of deprecated `..`
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On Sparc, gcc implicitly passes --relax to the linker, but -r is
incompatible with this. Therefore, if --no-relax is supported, it should
be passed to the linker.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clang compiler supports a useful compiler option -Weverything,
and GCC also has other warnings not enabled by -Wall.
If glib header files trigger a warning, however, testing glib with
-Werror will always fail. A size mismatch is also detected without
-Werror, so simply remove it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As all other devel packages are written in the form "name devel",
use this form for libcap devel and libattr devel, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vte >= 0.37 expores API version 2.91, which is where all the active
development is. qemu builds and runs fine with that version, so use it
if it's available.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b4f0375647f7b368d3dbd3834aee58cb0253566a.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I accidentally tried --with-sdlabi="1.0", and it failed much later in
a weird way. Instead, throw an error if the value isn't in our
whitelist.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 60e4822e17697d257a914df03bdb9fff4b4c0490.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Right now if SDL2 is installed but not SDL1, default configure will
entirely disable SDL. Check upfront for SDL2 using pkg-config, but
still prefer SDL1 if both versions are installed.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: c9e570b5964d128a3595efe3170129a3da459776.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes build failure with --enable-xfsctl and
new linux headers (>=4.5) and older xfsprogs(<4.5):
In file included from /usr/include/xfs/xfs.h:38:0,
from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97:
/usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’
struct fsxattr {
^
In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0:
/usr/include/linux/fs.h:155:8: note: originally defined here
struct fsxattr {
This is really a bug in the system headers, but we can work around it
by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides
the struct, so that xfs_fs.h doesn't try to define it as well.
CC: qemu-trivial@nongnu.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
[PMM: adjusted commit message, comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Enable seccomp on MIPS since libseccomp version 2.2.0 when MIPS support
was first added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Support for the PBKDF functions in nettle was not introduced
until version 2.6. Some distros QEMU targets have older
versions and thus lack PBKDF support. Address this by doing
a check in configure for the desired function and then skipping
compilation of the nettle-pbkdf.o module
Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Tested-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This allows you to do:
./config.status --the-option-you-forgot
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1452599928-7471-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to support only pdcurses for Windows, but recently Cygwin added
mingw64-i686-ncurses and mingw64-x86_64-ncurses packages which are
supported now, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The LUKS data format includes use of PBKDF2 (Password-Based
Key Derivation Function). The Nettle library can provide
an implementation of this, but we don't want code directly
depending on a specific crypto library backend. Introduce
a new include/crypto/pbkdf.h header which defines a QEMU
API for invoking PBKDK2. The initial implementations are
backed by nettle & gcrypt, which are commonly available
with distros shipping GNUTLS.
The test suite data is taken from the cryptsetup codebase
under the LGPLv2.1+ license. This merely aims to verify
that whatever backend we provide for this function in QEMU
will comply with the spec.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are three backend impls provided. The preferred
is gnutls, which is backed by nettle in modern distros.
The gcrypt impl is provided for cases where QEMU build
against gnutls is disabled, but crypto is still desired.
No nettle impl is provided, since it is non-trivial to
use the nettle APIs for random numbers. Users of nettle
should ensure gnutls is enabled for QEMU.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detect if the compiler can support the ifun and avx2, if so, set
CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction
optimization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Set CONFIG_OPENGL_DMABUF in case both mesa and libepoxy are
new enough to have support for dma-buf import/export.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GtaJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2016-02-12' into staging
Xen 2016-02-12
# gpg: Signature made Fri 12 Feb 2016 17:28:09 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2016-02-12:
xen: Drop __XEN_LATEST_INTERFACE_VERSION__ checks from prior to Xen 4.2
xen: move xenforeignmemory compat layer into common place
xen: drop XenXC and associated interface wrappers
xen: drop xen_xc_hvm_inject_msi wrapper
xen: drop support for Xen 4.1 and older.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was needed to build shared library for libcacard.
Now there's no need to use libtool, and since the build system is
already complicated enough, we have a way to slightly de-complicate
it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Xen 4.2 become unsupported upstream in 09/2015 (see
http://wiki.xen.org/wiki/Xen_Release_Features). However as far as the
interfaces provided by the toolstack libraries go 4.2 and 4.3 are
indistinguishable.
Therefore drop support for Xen 4.1 and earlier which removes a whole
pile of compatibility code which makes future work (to use stable
library interfaces provided by upstream) more difficult. In particular
all supported versions now use a pointer as a libxc handle (4.1 and
earlier used an integer, resulting in various shim layers).
Also Xen 4.2 was the first version of Xen to formally support upstream
QEMU (as a preview) so that makes sense as a cut-off now.
This change drops all the configure-y and resulting ifdefs in a mostly
mechanical way. A follow up will refactor wrappers which are now
unused.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Developers on 64-bit machines will often try to perform a
32-bit build of QEMU by running
./configure --extra-cflags="-m32"
Unfortunately if PKG_CONFIG_LIBDIR is not set to point to
the location of the 32-bit pkg-config files, then configure
will silently pick up the 64-bit pkg-config files and still
succeed.
This causes a problem for glib because it means QEMU will
be pulling in /usr/lib64/glib-2.0/include/glibconfig.h
instead of /usr/lib/glib-2.0/include/glibconfig.h
This causes problems because the 'gsize' type (defined as
'unsigned long') will no longer be fully compatible with
the 'size_t' type (defined as 'unsigned int'). Although
both are the same size, the compiler refuses to allow
casts from 'unsigned long *' to 'unsigned int *' as they
are different pointer types. This results in non-obvious
compiler errors when building QEMU eg
qga/commands-posix.c: In function ‘qmp_guest_set_user_password’:
qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types]
rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen);
^
In file included from /usr/include/glib-2.0/glib.h:35:0,
from qga/commands-posix.c:14:
/usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’
guchar *g_base64_decode (const gchar *text,
^
cc1: all warnings being treated as errors
To detect this problem, add a check to configure that
verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t).
If this fails print a warning suggesting that the dev
probably needs to set PKG_CONFIG_LIBDIR.
On Fedora x86_64 it passes with any of:
# ./configure
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64"
And fails with a mis-match
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64"
ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T.
You probably need to set PKG_CONFIG_LIBDIR
to point to the right pkg-config files for your
build target
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables integration with other QEMU logging facilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-11-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the XML and functions to get and set VSX registers.
Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until the previous patch this relied on xc_fd(), which was only
implemented for Xen 4.0 and earlier.
Given this wasn't working since Xen 4.0 I have marked this as disabled
by default.
Removing this support drops the use of a bunch of symbols from
libxenctrl, specifically:
- xc_domain_create
- xc_domain_destroy
- xc_domain_getinfo
- xc_domain_max_vcpus
- xc_domain_setmaxmem
- xc_domain_unpause
- xc_evtchn_alloc_unbound
- xc_linux_build
This is another step towards only using Xen libraries which provide a
stable inteface.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
Specifically libxenevtchn, libxengnttab and libxenforeignmemory.
Previous patches have already laid the groundwork for using these by
switching the existing compatibility shims to reflect the intefaces to
these libraries.
So all which remains is to update configure to detect the libraries
and enable their use. Although they are notionally independent we take
an all or nothing approach to the three libraries since they were
added at the same time.
The only non-obvious bit is that we now open a proper xenforeignmemory
handle for xen_fmem instead of reusing the xen_xc handle.
Build tested with 4.0 .. 4.6 (inclusive) and the patches targetting
4.7 which adds these libraries.
This uses CONFIG_XEN_CTRL_INTERFACE_VERSION == 471 to cover the
introduction of these new interfaces.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Found thanks to shellcheck!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:
$ echo "${a+($b)}"
ksh: ${a+($b)}": bad substitution
though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
nettle no ()
(because if nettle is not present then $nettle will be "no",
not a null string or unset).
Rewrite it to just use an if.
This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.
Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:
int main(void) { return 0; }
This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).
This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
