If curl_global_init() fails, per the documentation no other curl
functions may be called, so make sure to check the return value.
Also, some minor changes to the initialization latch variable 'inited':
- Make it static in the file, for clarity
- Change the name for clarity
- Make it a bool
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Instead, put the CURLAIOCB on a wait list and yield; curl_clean_state will
wake the corresponding coroutine.
Because of CURL's callback-based structure, we cannot easily convert
everything to CoMutex/CoQueue; keeping the QemuMutex is simpler. However,
CoQueue is a simple wrapper around a linked list, so we can easily
use QSIMPLEQ and open-code a CoQueue, protected by the BDRVCURLState
QemuMutex instead of a CoMutex.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-8-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This is pretty simple. The bottom half goes away because, unlike
bdrv_aio_readv, coroutine-based read can return immediately without
yielding. However, for simplicity I kept the former bottom half
handler in a separate function.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-7-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This is in preparation for the conversion from bdrv_aio_readv to
bdrv_co_preadv, and it also requires changing some of the size_t values
to uint64_t. This was broken before for disks > 2TB, but now it would
break at 4GB.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-6-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
If curl_easy_init fails, a CURLState is left with s->in_use = 1. Split
curl_init_state in two, so that we can distinguish the two failures and
call curl_clean_state if needed.
While at it, simplify curl_find_state, removing a dummy loop. The
aio_poll loop is moved to the sole caller that needs it.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-5-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The curl driver has a ugly hack where, if it cannot find an empty CURLState,
it just uses aio_poll to wait for one to be empty. This is probably
buggy when used together with dataplane, and the simplest way to fix it
is to use coroutines instead.
A more immediate effect of the bug however is that it can cause a
recursive call to curl_readv_bh_cb and recursively taking the
BDRVCURLState mutex. This causes a deadlock.
The fix is to unlock the mutex around aio_poll, but for cleanliness we
should also take the mutex around all calls to curl_init_state, even if
reaching the unlock/lock pair is impossible. The same is true for
curl_clean_state.
Reported-by: Kun Wei <kuwei@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170515100059.15795-4-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
All curl callbacks go through curl_multi_do, and hence are called with
s->mutex held. Note that with comments, and make curl_read_cb drop the
lock before invoking the callback.
Likewise for curl_find_buf, where the callback can be invoked by the
caller.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-3-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
curl_clean_state should only be called after all AIOCBs have been
completed. This is not so obvious for the call from curl_detach_aio_context,
so assert that.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-2-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Since cookies can contain sensitive data (session ID, etc ...) it is
desired to hide them from the prying eyes of users. Add a possibility to
pass them via the secret infrastructure.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1447413
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: f4a22cdebdd0bca6a13a43a2a6deead7f2ec4bb3.1493906281.git.pkrempa@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If the user has explicitly specified a block driver and thus a protocol,
we have to make sure the URL's protocol prefix matches. Otherwise the
latter will silently override the former which might catch some users by
surprise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331120431.1767-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
EPROTO is not found in OpenBSD. We usually use EIO when no better
errno is available, do that here too.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170317152412.8472-1-pbonzini@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect BDRVCURLState access with a QemuMutex.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-16-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-13-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libcurl will only give us as much data as there is, not more. The block
layer will deny requests beyond the end of file for us; but since this
block driver is still using a sector-based interface, we can still get
in trouble if the file size is not a multiple of 512.
While we have already made sure not to attempt transfers beyond the end
of the file, we are currently still trying to receive data from there if
the original request exceeds the file size. This patch fixes this issue
and invokes qemu_iovec_memset() on the iovec's tail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161025025431.24714-5-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
For some connection types (like FTP, generally), more than one socket
may be used (in FTP's case: control vs. data stream). As of commit
838ef60249 ("curl: Eliminate unnecessary
use of curl_multi_socket_all"), we have to remember all of the sockets
used by libcurl, but in fact we only did that for a single one. Since
one libcurl connection may use multiple sockets, however, we have to
remember them all.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161025025431.24714-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
While commit 38bbc0a580 is correct in that
the callback is supposed to return the number of bytes handled; what it
does not mention is that libcurl will throw an error if the callback did
not "handle" all of the data passed to it.
Therefore, if the callback receives some data that it cannot handle
(either because the receive buffer has not been set up yet or because it
would not fit into the receive buffer) and we have to ignore it, we
still have to report that the data has been handled.
Obviously, this should not happen normally. But it does happen at least
for FTP connections where some data (that we do not expect) may be
generated when the connection is established.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20161025025431.24714-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Currently, curl defines its own constant SECTOR_SIZE. There is no
advantage over using the global BDRV_SECTOR_SIZE, so drop it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20161025025431.24714-2-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Because TFTP does not support byte ranges, it was never usable with our
curl block driver. Since apparently nobody has ever complained loudly
enough for someone to take care of the issue until now, it seems
reasonable to assume that nobody has ever actually used it.
Therefore, it should be safe to just drop it from curl's protocol list.
[Jeff Cody: Below is additional summary pulled, with some rewording,
from followup emails between Max and Markus, to explain what
worked and what didn't]
TFTP would sometimes work, to a limited extent, for images <= the curl
"readahead" size, so long as reads started at offset zero. By default,
that readahead size is 256KB.
Reads starting at a non-zero offset would also have returned data from a
zero offset. It can become more complicated still, with mixed reads at
zero offset and non-zero offsets, due to data buffering.
In short, TFTP could only have worked before in very specific scenarios
with unrealistic expectations and constraints.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20161102175539.4375-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This simplifies bottom half handlers by removing calls to qemu_bh_delete and
thus removing the need to stash the bottom half pointer in the opaque
datum.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Another attempt to fix the bug 1596870.
When creating new disk backed by remote file accessed via HTTPS and the
backing file has zero length, qemu-img terminates with uniformative
error message:
qemu-img: disk.qcow2: CURL: Error opening file:
While it may not make much sense to operate on empty file, other block
backends (e.g. raw backend for regular files) seem to allow it. This
patch fixes it for the curl backend and improves the reported error.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently "make docker-test-mingw@fedora" has a warning like:
/tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
/tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
long unsigned int}'
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
^
cc1: all warnings being treated as errors
Cast to int to suppress it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Files with conditional debug statements should ensure that the printf is
always compiled. This prevents bitrot of the format string of the debug
statement. And switch debug output to stderr.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If connecting to a web server which has authentication
turned on, QEMU gets a 401 as curl has not been configured
with any authentication credentials.
This adds 4 new parameters to the curl block driver
options 'username', 'password-secret', 'proxy-username'
and 'proxy-password-secret'. Passwords are provided using
the recently added 'secret' object type
$QEMU \
-object secret,id=sec0,filename=/home/berrange/example.pw \
-object secret,id=sec1,filename=/home/berrange/proxy.pw \
-drive driver=http,url=http://example.com/some.img,\
username=dan,password-secret=sec0,\
proxy-username=dan,proxy-password-secret=sec1
Of course it is possible to use the same secret for both the
proxy & server passwords if desired, or omit the proxy auth
details, or the server auth details as required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1453385961-10718-3-git-send-email-berrange@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers pass in false, and the real external ones will switch to
true in coming patches.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently if qemu is connected to a curl source (eg. web server), and
the web server fails / times out / dies, you always see a bogus EIO
"Input/output error".
For example, choose a large file located on any local webserver which
you control:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
Once it starts copying the file, stop the webserver and you will see
qemu-img fail with:
qemu-img: error while reading sector 61440: Input/output error
This patch does two things: Firstly print the actual error from curl
so it doesn't get lost. Secondly, change EIO to EPROTO. EPROTO is a
POSIX.1 compatible errno which more accurately reflects that there was
a protocol error, rather than some kind of hardware failure.
After this patch is applied, the error changes to:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
qemu-img: curl: transfer closed with 469989 bytes remaining to read
qemu-img: error while reading sector 16384: Protocol error
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
qemu_opt_get_number returns a uint64_t, and curl_easy_setopt expects a
long (not an int). There is no warning about the latter type error
because curl_easy_setopt uses a varargs argument.
Store the timeout (which is a positive number of seconds) as a
uint64_t. Check that the number given by the user is reasonable.
Zero is permissible (meaning no timeout is enforced by cURL).
Cast it to long before calling curl_easy_setopt to fix the type error.
Example error message after this change has been applied:
$ ./qemu-img create -f qcow2 /tmp/test.qcow2 \
-b 'json: { "file.driver":"https",
"file.url":"https://foo/bar",
"file.timeout":-1 }'
qemu-img: /tmp/test.qcow2: Could not open 'json: { "file.driver":"https", "file.url":"https://foo/bar", "file.timeout":-1 }': timeout parameter is too large or negative: Invalid argument
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 63f0f45f2e the following
mechanical change was made:
if (!state) {
- qemu_aio_wait();
+ aio_poll(state->s->aio_context, true);
}
The new code now checks if state is NULL and then dereferences it
('state->s') which is obviously incorrect.
This commit replaces state->s->aio_context with
bdrv_get_aio_context(bs), fixing this problem. The two other hunks
are concerned with getting the BlockDriverState pointer bs to where it
is needed.
The original bug causes a segfault when using libguestfs to access a
VMware vCenter Server and doing any kind of complex read-heavy
operations. With this commit the segfault goes away.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to access VMware ESX efficiently, we need to send a session
cookie. This patch is very simple and just allows you to send that
session cookie. It punts on the question of how you get the session
cookie in the first place, but in practice you can just run a `curl'
command against the server and extract the cookie that way.
To use it, add file.cookie to the curl URL. For example:
$ qemu-img info 'json: {
"file.driver":"https",
"file.url":"https://vcenter/folder/Windows%202003/Windows%202003-flat.vmdk?dcPath=Datacenter&dsName=datastore1",
"file.sslverify":"off",
"file.cookie":"vmware_soap_session=\"52a01262-bf93-ccce-d379-8dabb3e55560\""}'
image: [...]
file format: raw
virtual size: 8.0G (8589934592 bytes)
disk size: unavailable
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The curl hardcoded timeout (5 seconds) sometimes is not long
enough depending on the remote server configuration and network
traffic. The user should be able to set how much long he is
willing to wait for the connection.
Adding a new option to set this timeout gives the user this
flexibility. The previous default timeout of 5 seconds will be
used if this option is not present.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the curl block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The curl block driver uses fd handlers, timers, and BHs. The fd
handlers and timers are managed on behalf of libcurl, which controls
them using callback functions that the block driver implements.
The simplest way to implement .bdrv_detach/attach_aio_context() is to
clean up libcurl in the old event loop and initialize it again in the
new event loop. We do not need to keep track of anything since there
are no pending requests when the AioContext is changed.
Also make sure to use aio_set_fd_handler() instead of
qemu_aio_set_fd_handler() and aio_bh_new() instead of qemu_bh_new() so
the current AioContext is passed in.
Cc: Alexander Graf <agraf@suse.de>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This allows qemu to use images over https with a self-signed certificate. It
defaults to verifying the certificate.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer now supports a generic json syntax for passing option parameters
explicitly, making parsing of options from the url redundant.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
